Providing work for AB Cable at different site of 33/11 KV Dhakpatti under EDSD Anarwala under EDD (North),Dehradun

Amount

Material

Stay Clamp For ST Pole SP- 55/33/21/10 PCC 8.5 Of Size 50x6 sqmm duly red oxide painted with suitable size with fitted Nut and Bolts and washer as per specification of UPCL

MS Half Clamp For LT Distribution Box For pole ST/PCC Of Size 35x5 sqmm duly red oxide painted with suitable size with fitted Nut and Bolts and washer as per specification of UPCL

MS Clamp For dead end and suspension for ST pole/PCC pole of size 35 x 5 sqmm duly red oxide painted.

SMC 3 Phase LT Distribution box with inbuilt pannel lock, Al Bus Bar RYB 25 x 6 mm, Al Busbar N 40 x 6 mm (sintex make or other ISI mark reputed company)

Insulated piercing connector body moded from high quality mechanical climates and UV resistant glass reinforced polyamide, hot dipped galvanized bolts and contact teeth ABC size 95-95/95-50/50-50/95-35/50-35 sqmm TUCO/RPG/3M make

Dead End Clamp With I Hook & MS Clamp made of MS Flat for ST Pole SP-55/23 of Size 50x6 sqmm duly red oxide painted with suitable size with fitted Nut and Bolts and washer for Dead End Assembly as per UPCL specification

Suspension Clamp With I Hook & MS Clamp made of MS Flat for ST Pole SP-33/10/PCC pole of Size 50x6 sqmm duly red oxide painted with suitable size with fitted Nut and Bolts and washer for Suspension Clamp as per UPCL specification

LT Wire Neutral Connector PG Clamp 70/35-25 sqmm single bolt as per UPCL specificationfor energising distribution box

Lug size O type 35 Sqr mm (for connecting 1 x 35 sq mm XLPE insulated Al. cable for energising the distribution box)

1x35 sq mm XLPE insulated Al. Cable for energising the distribution boxes

GI nut and bolt off size

LT AB Cable 3 x 95 + 1 x 70 + 1 x 16 sqmm

LT AB Cable 3 x 50 + 1 x 35 + 1 x 16 sqmm

Labour Charges

Cartage of ST Pole SP-21/10 pole from Store Centre Dehradun to Work Site with Stacking site in 1 Km Distance Including Loading & unloading (distance 5kms-100 kms)

ST Pole SP-21

Cartage of small Line material from Store Centre Dehradun to road Side Including loading & unloading (distance 0kms-20 kms)

Excavation of earth for pole pit of size 0.9 x 0.6 x 1/6th full length of pole for erection of pole in all type of soil including proper dressing of sides and ramming of bottom including getting out the excavated soil as directed complete work.

Erection of following single support pole in proper level and aligenment alongwith fixing of all accessories, like top channel and clamp as per RESSPO construction manual.

ST Pole SP-21

Grouting of pole in size 0.45 x 0.45 x 1/9th of the support in CC ratio 1:4:8 (1 cement: 4 graded stone 20 mm nominal size : 8 coarse sand) block including cost of cement, sand and stone ballast back filling of soil and boulders in pit ramming and proper alignment, leveling as per RESSPO construction Manual.

Muffing of pole size 0.45 cm x 0.60 cm radious with CC 1:3:6 ( 1 cement: 3 coarse sand : 6 graded stone 10 mm nominal size) block size 45 cm height from ground level including cost of cement, stone and sand etc.

Muffing of old existing pole size 0.45 cm x 0.60 cm radious with CC 1:3:6 ( 1 cement: 3 coarse sand : 6 graded stone 10 mm nominal size) block size 45 cm height from ground level including cost of cement, stone and sand etc.

Excavation of earth for pole pit of size 0.6 x 0.6 x 1.2 mtr in all type of soil including proper dressing of sides and ramming of bottom including getting out the excavated soil as directed complete work.

LT Stay

Grouting of stay in size 0.6 x 0.6 x 0.3 in CC ratio 1:4:8 (1 cement : 4 graded stone 20 mm nominal size :8 coarse sand ) block including cost of cement, sand and stone ballast back filling of soil and boulders in pit and ramming and proper aligment, leveling as per RESSPO Manual.

Removing and reconnection of three phase LT consumer service connection

Earthing of support with M.S. earth od of 2.5 meter long by hammering of M.S. Rod to proper depthe and connecting the earth electrode with the help of G.I. wire as per construction manual.

Painting of pole

ST Pole SP-21

Dismantling of old ACSR wesel conductor from existing LT line including Re rolling cartage from worksite to JE store.

LT line 3 phase 4 wire

LT line 2 phase 3 wire

LT line 1phase 2 wire

laying stringing and sagging of AB cable including fixing of piercing connector dead and clamp with I hook, suspension clamps with I hook in all complete work.

LT AB Cable 3 x 95 + 1 x 70 + 1 x 16 sqmm

LT AB Cable 3 x 50 + 1 x 35 + 1 x 16 sqmm

Installation of LT Distribution board complete work both single phase and three phase.

Looping chopping of tree branches

Realigment of old poles

Raman electricals

Sagar Engineering Company