8595/e8

Amount

Dismantling plain corrugated steel sheeting of any gauge/thickness including Nainital and similar pattern all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed.

M&L precast PCC 1:3:6 type C1 (using 20 mm graded crushed stone aggregate) as in solid building blocks, exc. 10 cm in width and setting in CM 1:6 all as specified and directed.

M&L precast PCC solid building blocks in PCC 1:3:6 type C1 (using 20mm graded crushed stone aggregate) set in CM 1:4 or slabs 10cm thick (with plain or interlocking joints as directed) setting in mortar, in walls all as specified and directed.

M&L RCC M-25 grade (design mix) (using 20mm graded crushed stone aggregates) in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc. basement slabs, under-reamed piles and mass concrete all as specified and directed.

M&L RCC M-25 grade (design mix) (using 20mm graded crushed stone aggregates) in beams, cantilevers, bressummers, lintels over 1.5m span all as specified and directed.

M&L RCC M-25 grade (design mix) (using 20mm graded crushed stone aggregates) as in chajjas all as specified and directed.

M&L reinforced cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like all as specified and directed.

Use & waste formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work, vertical or to batter finished flat for rough finished surfaces of concrete all as specified and directed.

Use & waste formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, in flat for fair finished surfaces of concrete all as specified and directed.

Use & waste formwork to chajjas, troughs and similar items including edges in flat for fair finshed surfaces of concrete, all as specified and directed.

Use & waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), in flat for fair finshed surfaces of concrete all as specified and directed.

M&L mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed.

All as per item no 14 here in before but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders all as specified and directed.

M&L rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:6, finished even and smooth without using extra cement in internal surfaces of wall all as specified and directed.

Taking down cement plaster surface on stone/ brick walls etc including racking out joints hacking for key, scrubbing down with water all as specefied and directed.

M&L rendering 15 mm thick on other than fair faces of brick work or concrete surfaces in CM (1:4) finished surfaces even and smooth without using extra cement in external surfaces of walls all as specified and directed.

M&L rendering 5mm thick on ceilling as in chajja in CM 1:3 all as specified and directed

M&L for preparing new plastered surfaces and apply two coat of cement base paint over a coat of alkali resistant primer on external surfaces of walls all as specified and directed..

M&L for preparing new plastered surfaces and applying two coat of distemper oil emulsion over a coat of 3mm thick wall care putty on internal walls all as specified and directed.

M&L for preparing new plastered surfaces and applying three coats of white wash on ceilling all as specified and directed.

Demolition of cement concrete (un-reinforced) and pavings nexc 15 cm thickness (below or above ground level) all as specified and directed.

M&L PCC 1:4:8 type D 2 , (using 40mm graded crushed stone aggregate) in foundation all as specified and directed.

M&L 25mm thick PCC 1:2:4 type B-0, (using 12.5 graded crushed stone aggregate) in floor all as specified and directed.

M&L light shade, vetrified ceramic tiles, 10 mm thick (square/rectangular) polished, area of each tile nexc 0.36 sqm in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles laid over a screed bed 15 mm thick in CM 1:6 all as specified and directed.

All as per item no 26 here in before but on vertical surfaces such as skirting, dados and rises to steps etc set , jointed in neat cement slurry and pointed to match in white or coloured cement to match the shade of tiles laid over and including 10mm thick rendering in CM 1:4 as in backing coat all as specified and directed.

M&L prepolished chequered cement concrete tiles 30cmx30cmx25mm thick, set, jointed and pointed in neet cement slurry in floor with grey cement and pigment and including over screed bed or bedding layer of mortar 20 mm thick for laying floor finished in cement mortor 1:6 all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing serviceable tiles to store and rubbish off the premises all as specified and directed.

M&L coloured glazed tiles 450 x 350 x 7mm thick on vertical surfaces such as skirting, dados and risers to steps etc set, jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles and laid over and including 10mm thick rendering in CM 1:4 as in backing coat all a specified and directed.

S&F 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite all as specified and directed.

M&L PCC 1:3:6 type C-1 (using 20 mm graded crushed stone aggregates) as in plinth protection, 75 mm thick, finished surfaces even and smooth without using extra cement all as specified and directed.

M&L cement concrete 1:3:6 type C-2 (using 40 mm graded crushed stone aggregates) as in surface channel and drain all as specified and directed.

Dismantling wall and ceiling boards of any thickness including cover fillets all as specified and directed.

Dismantling framed work of timber in scantling 40 sq cm and over in section in any position all as specified and directed.

Dismantling boarding of any description, fixed in any position with nails all as specified and directed.

S&F frame work for suspended false ceiling GI exposed ceiling suspension system of grid size 600mmx600mm with main runner 38mmx24mm, cross tee 29mmx24mm and wall angle 24mmx24mm including 6 mm dia GI/MS bar hanger fixing with steel dash fastner or iron purlins from the roof with adjustment clip providing position for light fixture etc all as specified and directed.

S&F false ceiling of Everest designer boards of size 595mm x 595mmx4mm thick fixed on GI snap grid all as specified and directed.

Taking down chowkat or frame with shutters (without taking off shutter from the frame) area exc. 1.5 sqm but nexc 4 sqm each all as specified and directed.

Taking down door/window shutter/cupboard shutter with frame (without taking off shutters from the frame) area nexc1.5 sqm each all as specified and directed.

Taking down shutters of any description area exc 1 sqm but nexc 2 sqm each all as specified and directed.

S&F pressed steel frames of size 125x60mm for doors with one or more rebates ncluding necessary fixing lugs, hinges, lock strike plate all as specified and directed.

M&L PCC 1:3:6 type B0 (using 12.5 mm graded crushed stone aggregade) for back filling in pressed steel door frame all as specified and directed.

S&F 2nd class hard wood wooden door stoper small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary labours, articles nexc 200 cucm each all as specified and directed.

S&F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides all as specified and directed.

M&L 35 mm thick second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a), supplied and fitted to chowkats all as specified and directed.

S&F solid PVC door frame of size 50 mmx47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S square tube, suppyling and fixing in opening as per specification and drg all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for styles and plain colour of PVC sheet for top rail lock rail and bottom rail, on either side & gap insert for top rail bottom rail panelling of plain colour PVC sheets to be fitted in MS frame welded/sealed to the styles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppying and fixing in the frame at site as per specification & drawing all as specified and directed.

S&F extruded aluminium alloy handles, fabricated type anodised of 150mm long size all as specified and directed.

S&F aluminium anodised barrel tower bolts of extruded section and fixed of 150mm long all as specified and directed.

S&F butt hinges medium weight cold rolled mild steel 100mm long each all as specifed and as directed.

S&F 100 mm long stainless steel butt hinges all as specifed and as directed.

S&F floor door stopper of aluminium alloy body and tongue, overall length 140 mm anodised, with hard drawn steel spring fixed in floor all as specified and directed.

M&L 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed all as specified and directed.

S&F galvanised mild steel wire cloth 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples all as specified and directed

S&F powder coated (minimum thickness of powder coating 50 micron) aluminium frames and shutters for doors and window, ventilators with one or more rebates including joining cleats for fixing etc.of any type, side hung shutters, sliding shutters etc complete all as specified and directed. Note:- glazing, rubber bedding and aluminum hardware shall be measured and paid separately under respective items of BOQ

M&L rubber beading for fixing glass panes in aluminium frame work all as specified and directed

M&L 12 mm thick prelaminated particle board, exterior grade, prelaminated on both sides with decorative choice laminations fixed with screws to aluminium frame work all as specified and directed.

S&F stainless steel wire cloth. 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified and directed

S&F sheet glass 4.80 mm thick ordinary quality and glazing with oil putty in square nexc 0.5 sqm in each pane all as specified and directed.

S&F in repairs curtains rails of mild steel, chromium plated with fixing brackets, stops, rollers all as specified and directed.

M&L pre laminated 19mm thick particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work all as specified and directed.

M&L 2nd class HW, plain fillets, square, rectangular or triangular in sectional area exc 3 but nexc 6 sqcm clean sawn, secured with nails or beads, wrought fixed with nails all as specified and directed.

S&F continuous (piano) hinges, mild steel, bright finish or electro galvanised width of flap when open 40 mm all as specified and directed.

S&F brass 2 lever Locks, cupboard, grade I, size 50 mm all as specified and directed.

M&L for preparing new wooden surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint ordinary tint over a coat of pink primer all as specified and directed.

M&L for preparing old steel surfaces of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint ordinary tint complete all as specified and directed.

M&L for preparing new steel surfaces of any description, not otherwise, described, over 10cm width or girth and applying two coats of synthetic enamel paint ordinary tint over a coat of red oxide primer all as specified and directed.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) with plastic water closet seat, black, closet pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device all as specified and directed.

S&F health faucet with stainless steel hose and hook all as specfied and directed

S&F in repairs toilet paper holder of brass CP including screw and CP brass wood/ plastic cleats all as specified and directed.

S&F in repairs 10 liters PVC valveless, syphonic action type flushing cistern, low level, white, with inlet, ball valve, float and handle including bracket with 32 mm dia PVC flush pipe all as specified and directed.

S&F in repair bib taps, fancy type chromium plated, cast copper alloy with crunch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed of 15mm bore size all as specified and directed.

S&F in repair, stop cock/angle cock, fancy type chromium plated cast copper alloy, screwed down, high presure with cruntch or butterfly handle screwed both ends for iron pipe of 15mm bore pipe all as specified and directed.

S&F in repair two way angle cock /stop cock, fancy type chromium plated cast copper alloy, screwed down, high presure with cruntch or butterfly handle screwed both ends for iron pipe 15mm bore pipe all as specified and directed.

S&F in repair, 15mm bore of pipe brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed all as specified and direted.

S&F PVC connection 15mm size, 450mm long with PTMP nuts both side all as specified and directed.

S&F in repair of ceramic counter type wash hand basin, glossy finish, size 550x400mm including bracket, waste coupling all as specified and directed.

S&F in repair of continental central hole basin mixer 'Hot and cold', chromium plated, without pop up waste system with 450mm long branded hose and fixed for 15mm bore pipe all as specified and directed. Make : Jaquar

Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store of 15mm bore size all as specified and directed.

Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store of 20 mm bore size all as specified and directed.

M&L 15mm bore GI tubing 'medium grade' with all fittings and fixed to wall or celing or laid in floor all as specified and directed.

M&L 20mm bore GI tubing 'medium grade' with all fittings and fixed to wall or celing or laid in floor all as specified and directed.

M&L PVC (SWR) floor trap, plain with grating including jointing with solvent cement of 75mm all as specified and directed.

S&F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors all as specified and directed.

S&F PVC (SWR) bend of any radius 75 mm dia all as specified and directed.

S&F in repairs soap dish size 160x160x90mm fixed with chromium plated brass screws all as specified and directed.

S&F in repair for CP towel rail of 20mm dia with hook 600mm long all as specifed and directed.

S&F in repair of 32 mm waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed all as specified and directed.

S&F in repair of 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed all as specified and directed.

Dismantling water tanks of capacity exc 250 litres but nexc 500 litres and removing to store all as specified and directed.

S&F rotational moulded polyethylene water storage tank (cylindriacal vertical with closed top) hoisted and fixed in position all as specified in SSR part-I of capacity 500 litres including 20mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball and nipple screwed for iron pipe and fixed all as specified and directed.

S&F in repair 15mm dia concealed stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, but fancy type, chromium plated with long shank and cup (concealed type) all as specified and directed.

S&F in repair brass chromium plated shower roses of 125mm size with or without swivel joints, any size, including fixing to steel pipe or union all as specified and directed.

Taking down carefully copper/aluminium point wiring (light fan socket or power) including fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fitting etc and removing materials from site and keeping in safe custudy for taking as sch of credit (credit for above items should be made as per conditions separately) and depositing to MES store yard and making good to the disturbed surface of walls, floors roof etc all as specified and directed.

Dismantling unserviceable old existing submain wiring of any description and size all as specified and directed.

Dismantling of old existing unserviceable XLPE/service cable of any size all as specified and directed

Dismantling of unserviceable distribution boards all as specified and directed.

Excavation in trenches nexc 1.5 metre wide and nexc 1.5 metre in depth for foundation for laying of under ground cable and getting out in hard dense soil all as specified and directed.

M&L sand cushioning for protection of PVC cable with approved sand of uniform thickness, laid dry, by filling in trenches and punning to proper required cover all as specified and directed. Note:- For the purpose of payment only punned thickness will be measured.

Supply and laying old size sub-class ’B’ bricks laid flat length equal to width of bricks, perpendicular to UG cable laid over dry sand cushioning, for cable protection all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers n exc 25cm thick in soft loose soil all as specified and directed.

Removal of surplus soil to a distance nexc 50 metre and depositing where directed at a level nexc 1.5 metre above the starting point all as specified and directed.

M&L in replacement of 32 mm dia steel tubes light grade galvanised iron with fittings, laid in trenches/wall/pole for protection of underground cable when crossing the road all as specified and directed. MAKE: JINDAL/ PRAKASH/SURYA)

Supply and lay in trenches, fixed to wall/pole UG Cable XLPE insulated screened PVC bedded galvanised steel strip or wire armed heavy duty electric cable with multi stranded Aluminium conductor, 1100V grade of size 10 sqmm 4 core all as specified and directed.

M&L for point wiring in PVC conduit or conceled in some places as per required at site of size confirming to IS 2079-1973 medium grade on surface with PVC insulated unsheathed multistranded copper conductor cable (FRLS) 1.5 sqmm nominal cross sectional area 1100 volts grade complete with all fittings such as elbow, bends, junction boxes, saddles incluing MS sunken box 2.0 mm thick board (ISI Marked) including 3.0 mm thick ISI marked plastic laminated sheet cover for fixing switches socket/regulator etc including 1.5 sqmm PVC insulated & unsheathed copper conductor cable as earth wire and connected to light/fan & common earth dolly with necessary copper thimbels all as specified and directed for One light/fan/bell point controlled by one, one way switch with cable 1.5 sqmm size.

All as per item No 107 above but one socket outlet 3 pin 5/6 Amps on independent board controlled by one, one way switch.

All as per item No 107 above but one socket outlet 5 pin 5/6 Amps on the same board with other one, one way switch.

All as per item No 107 above but for socket out let, 15/16 Amps on independent board with 4 Sqmm size cable and 2.5 Sqmm for continuty earth wire connected to common earth dully all as specified and directed.

M&L sub main wiring in PVC conduit/conceled of required size 2 x 4 sqmm PVC insulated multistrand copper conductor with 01x2.5 sqmm PVC insulated multistrand copper conductor as earth continuity wire all as specified and directed. Make : Havells/Plaza/ Polycab Note:- For the purpose of payment two runs of 4sqmm conductors and one run of 2.5 sqmm conductor with conduit will be measured as one length.

M&L sub main wiring in PVC conduit/conceled of required size 2 x 2.5 sqmm PVC insulated multistrand copper conductor with 01x1.5 sqmm PVC insulated multistrand copper conductor as earth continuity wire all as specified and directed. Make : Havells/Plaza/ Polycab Note:- For the purpose of payment two runs of 4sqmm conductors and one run of 2.5 sqmm conductor with conduit will be measured as one length.

M&L switch socket combination 5A/16A, 5 in 1 flush type all as specified and directed. Make -Havells /Anchor / Legrand / HPL.

S&F switch piano flush type 5/6 Amps single pole one way all as specified and directed. Make : Havells/Anchor/legrand

S&F socket out let 5 pin 5/6 Amps all as specified and directed. Make : Havells/Anchor/legrand

M&L ceiling rose 2/3 terminals 65x25 mm dia poly carbonate isolated all as specified and directed. Make : Havells/Anchor/legrand

S&F lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings all as specified and directed. Make : Havells/Anchor/legrand

S&F 9 watt LED bulb, cool day light, 230/240V AC supply all as specified and directed Make -Surya/philips, CG,Havells, syska.

S&F bell multi music type 240 volt AC all as specified and directed.

S&F bell push flush type 240 volt AC all as specified and directed.

S&F surface and wall mounted LED tube light fitting with polycarbonate housing & interated electronic driver with tube rod of 18 watt, slim elegant design, and including connected with 3 core 23/0.0076 insulated copper wire from celing rose to fitttings to connector all as specified and directed. Make:- Havells, CG, Philips, Bajaj.

S&F in repairs of building security light fittings complete with 35 watt LED type IP 66 pressure die cast aluminium housing and heat resistant toughened glass with frame protection and better optics for uniform distribution with fixed bracket made out of GI pipe light grade of suitable size and MS clamp and nut bolts washers and connected with twin core cable 1.5 sqmm from ceiling rose to fittings connector all as specified and directed. Make : Havells/Philips/Bajaj

S&F surface and wall mounted LED tube light fitting with polycarbonate housing & integrated electronic driver with tube rod of 10 watt, slim elegant design, including connected with 3 core 23/0.0076 insulated copper wire from celing rose to fittting connector all as specified and directed. Make, Havells, CG, Philips, Bajaj.

S&F in repair MCB DB box 20 Amps 240 volt, 20 amp MCB with suitable top for geyser with blanking plate all as specified and directed. Make: Havells/Legrand/HPL/Anchor

S&F electric storage water heater vertical type of capacity 25 litres of five star rating, AC 230 volts with PVC connection pipe 15 mm dia heavy duty approximate length 450/600mm long -02 Nos, Hole fastener nut & bolts made of iron approximate length 6 cm long -04 Nos all as specified and directed. Make - Havells cat part No. GHWHCFSWH025 (Model No. Monza CF) or equivalent Crompton/V-Gaurd

S&F in repairs MCB DB SPN 8 way, 240 volt , double door type MCB DB suitable for mounting incoming and outgoing MCBs double pole/ single pole with blanking plate all as specified and directed.

All as per item No 31 above but MCB DB SPN, 12 way 240 volt with blanking plate all as specified and directed.

S&F in repairs MCB single pole with thermal over load as well as magnetic short circuit tripping device with quick, break trip free mechanism, robust design and terminals having heat resistance moulding suitable for single phase circuit of 6 to 40 Amps all as specified and directed.

All as per item No 33 above but MCB DP 40 Amps .

All as per item No 33 above but MCB TP 100 Amps .

M&L in repairs for earthing complete with galvanished steel earth plate electrode of size 600X600X6mm thick burried directly in ground vertically to a depth not less than 2.25m below normal ground level with top edge of earth plate not less than 1.5metre below normal ground level connected to and including GI earth lead wire 4mm dia by means of bolts, nuts, check nuts & washers of galvanised iron and connected to test point all as shown in electrical plate No 3 of SSR part I-2020 and as specified or indicated and testing on completion including excavation and earth work in any type of strata available at site, PCC 1:3:6 type C-1 earthing chamber, precast RCC slab 50 mm thick in cement concrete 1:2:4 type B-1 using 20 mm graded crushed stone aggregate, reinforced with welded steel wire fabric (XPM) weight not less than 4 kg/sqm funnel with GI watering pipe 20 mm bore medium grade, wire mesh and lugs, GI protection pipe 15 mm bore light grade up to 7.5 metre long all as specified and directed. NOTE :- GI earth wire and protection pipe beyond 7.5 metre will be measured and paid separately.

S&F exhaust fan AC single phase 230/240 volts, 50 HZ of size 300 mm sweep 900 RPM MS body heavy duty operating with louvers shutter complete grouting the ragged bolt in wall fixing the frame and exhaust fan fix including louver shutter with frame on the exhaust side and connecting with PVC insulator 3 core 23/0.0076 copper wire rubber insulated from ceiling rose to exhaust fan motor all as specified and directed.

AJAY KUMAR CONTRACTOR

M/S BHAWANI CONSTRUCTION