Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹1.2 LAccepted-AOC | 1 | Accepted-AOC Agreement executed | |
| 2 | 2₹1.3 L+₹9,529.87 (7.69%)Rejected-AOC | 2 | Rejected-AOC high quoted,hence rejected |
| Sl No | Description | Qty | Unit | Mithun Viswanath L1 | Anil Kumar P V L2 |
|---|---|---|---|---|---|
| 1.00Rennovation works | |||||
| 1.00 | OD309453/2025-2026:Providing and fixing Alu Zinc profile sheets (size, shape and pitch of corrugation as approved
by Engineer-in-charge) 0.40 mm (+0.05%), thickness . Sheet should have protective guard film
of 25 microns minimum to avoid scratches during transportation and should be supplied in
single length up to 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using
self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto anypitch in
horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and
including cutting to size and shape wherever required. (MOD 12.50 of DSR ) | 22.5 | 1 sqm | 525.03 ₹11,813.18 Lowest | 565.41 ₹12,721.73 |
| 1.00 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 50.76 | kg | 170.22 ₹8,640.37 Lowest | 183.31 ₹9,304.82 |
| 1.00 | 10.28:Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) | 69.24 | kg | 698.69 ₹48,377.3 Lowest | 752.43 ₹52,098.25 |
| 1.00 | 50.9.1.1:Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately), using good quality Anjili wood /jack wood | 0.18 | cum | 1,08,462.5 ₹19,306.33 Lowest | 1,16,805.8 ₹20,791.43 |
| 1.00 | 50.9.3.1:Providing and fixing paneled or paneled and glazed shutters for doors, windows and clerestory windows, 30 mm thick shutters including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding paneling which will be paid for separately, all complete as per direction 0f Engineer in- charge. using Anjili/ Jack wood | 1.54 | sqm | 3,047.12 ₹4,701.71 Lowest | 3,281.51 ₹5,063.37 |
| 1.01 | 50.9.4.1:Providing and fixing paneling or paneling and glazing in paneled or paneled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured) paneling for paneled or paneled and glazed shutters 25 mm to 40 mm thick using good quality Anjili/ Jack wood | 0.66 | sqm | 2,732.15 ₹1,795.02 Lowest | 2,942.31 ₹1,933.1 |
| 1.01 | 50.9.6.1:Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Using Anjili wood / jack wood 30 mm thick shutters | 5.22 | sqm | 3,822.9 ₹19,940.25 Lowest | 4,116.97 ₹21,474.12 |
| 1.01 | 9.48.2:Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to openings/ wooden frames with rawl plugs screws etc | 28.8 | kg | 225.58 ₹6,496.7 Lowest | 242.93 ₹6,996.38 |
| 1.01 | 21.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) | 2.43 | sqm | 1,163.72 ₹2,827.84 Lowest | 1,253.24 ₹3,045.37 |
Tender Value
₹1.3 L
EMD Value
₹3,177
Closing Date
21 Oct 2025, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
ASSISTANT ENGINEER
Office of the Assistant Engineer, LID EW Subdivision, Peravoor Block Panchayat
Annual Plan-Peravoor BP 2025-26 Proj no. 64/26 -Renovation works to Gunnika Samskarika nilayam Muzhakkunnu GP-General Civil Work
2025_LSGD_808768_3
AE/LID EW/PVRBP/25-26/Phase2
Open Tender
Civil Works - Buildings
Item Rate
Muzhakkunnu
Please refer Tender documents.
7 documents required · 7 mandatory
₹555
Yes
₹3,177
Yes
29 Nov 2025
13 Oct 2025
23 Oct 2025
13 Oct 2025
21 Oct 2025
13 Oct 2025
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.29 MB
viewsbd.pdf
Tender Documents • 1.73 MB
BOQ_1349131.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .