DEPOSIT-Vikas Bhavan Section- Renovation of Front office Directorate of Economics and Statistics.

Amount

Civil Works

15.57:Dismantling aluminium / Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material with in 50 metres lead as directed by Engineer - in-Charge

13.80:Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

14.53.1:Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:One or more coats on old work

50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

14.54.1:Painting with synthetic enamel paint of approved brand and manufacture of required colour to an give even shade:One or more coats on old work

21.1.2.2:For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron)

OD279021/2024-2025:Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge ( Door handle, lock and stopper etc to be paid separately)

21.1.1.1:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionAnodised aluminium (anodised transparent or dyed to required shade according to IS : 1868, Minimum anodic coating of grade AC 15)

OD279988/2024-2025:Providing and fixing bright finished Galaxy stainless steel pipe Pull handle 300 mm length for Glass Door with screws etc as per the direction of Engineers in charge

OD279180/2024-2025:Providing and fixing 12 mm thick Marine plywood for partition & wall Panelling , to frame, backing or studding with screws etc. complete ( Frames, backing or studding to be paid separately) as per the direction of site Engineer-in-charge.

OD278980/2024-2025:Laminate panelling : Providing and fixing Premium quality laminates sheet 2 mm thick on to the existing plywood using adhesive complete as per the direction of engineer in charge including all the cost of accessories, labour charge etc complete (data based on 9.126.1 of DAR )

OD279912/2024-2025:Supplying and fixing stainless steel strip T shaped as per design with nearest available size between the lamination sheets in level and line as per the direction of Engineer in charge

OD279744/2024-2025:Providing and fixing of external wall system on Light gauge steel frame work with (One side covered with 9mm Cement board). Outer face 9mm thick heavy duty fiber cement board confirming to IS 14862:2000, category IV type A (High pressure steam cured) as per standard sizes fixed with self drilling / taping screws / fasteners @ 60cm c/c of approved make. A grove of 2 mm to 3mm shall be maintained and groves shall be sealed with silicon based sealant. The board shall be fixed in a staggered pattern. Screws shall be of counter sunk rib head of 1.60mm to 4 mm thick of 8 to 10 gauge of length varying from 25 to 45 mm and internal face 12.5mm thick gypsum plaster board fixed on 8mm thick fiber cement board confirming to IS 14862:2000 of category III type B (High pressure steam cured) as per standard sizes fixed with self drilling / taping screws / fasteners @ 60cm c/c of approved make, proper taping and jointing to be done using fiber mesh tape and epoxy and acrylic based jointing compound for seamless finish.(cost of frame work to be paid for separately).

50.9.11.2:Providing and fixing Thomson Multi wood board or equivalent make paneling 18 mm thick, to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately)as per the direction of site Engineer-in-charge.

OD280336/2024-2025:Providing and applying coloured multiwood edge tape with pasting prepare the surface even and smooth complete as per the direction of Site engineer

OD279780/2024-2025:Providing and fixing powder coated telescopic drawer channels SLEEK TRELLY 18" long with necessary screws etc complete.

OD279781/2024-2025:Providing and fixing SS auto closing cabinet hinges with necessary screws etc complete.

9.66.1:Providing and fixing ISI marked oxidised M.S. handles conforming to IS : 4992 with necessary screws etc. complete:125 mm

OD279798/2024-2025:Lettering with Vinyl sticker type letter of standard size, font and colour as specified by the engineer in charge.

OD279799/2024-2025:Fabricating, supplying, and fitting Titanium Gold letters (English / Malayalam) for the name board with bolts and nuts, drilling and fixing to the panel. with synthetic resin adhesive to correct line and levels as per the direction of Departmental Engineer. Letters made of 1 mm braze sheet. having a height of 100 mm and a projection of 25 mm from the base

OD279800/2024-2025:Providing and fixing " Govt of Kerala " Emblem of Titanium Gold colour made up of braze sheet of 1 mm thick and Emblem width 500 mm , and projection of 25 mm with bolts and nuts, drilling and fixing to panel background with proper line and level, including all labour, material and installation etc complete, as per the direction of engineer in charge.

OD279992/2024-2025: Providing and fixing superior quality horizontal blinds for openings including aluminium channels, runners, end cap and all fittings including all labour charges for fixing and all incidental charges. etc. complete as per direction of Engineer's in charge

12.45.2:Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with:12.5 mm thick tapered edge gypsum fire resistant board conforming to IS; 2095-Part I

OD279962/2024-2025:Labour engaged engaged for removing the waste materials in convenient place and other petty works etc complete.

K PRADEEP (BID ID -2184974)

Bidder Name

K PRADEEP

ANANDRAJ R S