Loading
Loading…
New: tenders and results on WhatsApp
New: Find tenders, results and companies on WhatsApp, by text or voice note
New: tenders and results on WhatsApp
New: Find tenders, results and companies on WhatsApp, by text or voice note
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹1.5 L
EMD Value
₹3,000
Closing Date
18 Nov 2026, 5:00 pm7d left
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
EE
Executive Engineer JS Division Baggi Distt. Mandi H.P.
as per BoQ
2026_HPIPH_147529_1
EE-JSD-BGI-TA-Tender/2026- 21290-340 dt. 06/11/2026
Open Tender
Repair and Maintenance Works
Item Rate
90 days
Baggi
as per NIT
6 documents required · 6 mandatory
₹350
₹3,000
9 Nov 2026
9 Nov 2026
19 Nov 2026
9 Nov 2026
18 Nov 2026
9 Nov 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Excavation in foundations trenches etc. (for pipes and pits) upto all depths in all kinds of soil such as pick work, jumper work, blasting and chiselling soft / hard rocks where blasting is prohibited in all leads and lifts including jumper work, blasting and chiselling soft / hard rocks where blasting is prohibited in all leads and lifts including trimming and dressing of sides levelling of bed to correct excavation and returning the stacked soil after laying jointing and testing of G.I.Pipes in trenches in 15 cm. layers including consolidating each deposited layer by ramming and watering and than disposing of all surplus excavated soil as directed in all leads and lifts and soring strutting/timbering and dewatering where ever required including restoration of un-metalled/metalled paved surface of itsoriginal conditions including cost of diversion for traffic night signals fixing caution boards and fencing etc.complete in all respect with in all leads and lifts as per the direction and best satisfaction of Engineer-in-Charge. | 95.4 | Cum | - | - |
| 2Laying, Jointing, testing and carriage in trenches to be leveled to grades, IS marked Gl Pipes (Medium) of following diameters conforming to IS 1239-1991 (Part II) (latest with up to date ammendments) including Butt welding at both the ends to make water tight joint carriage of material upto all leads and lifts. This work also includes fabrication of short pieces bends, tees & other specials etc. made from parent tubes with butt welding in three layers as per applicable for the particular reach & of technical specifications as per site conditions including flushing, cleaning Hydraulic testing complete to the best satisfaction of Engineer in Charge. The laying of pipe shall conform to IS; 5822-1994 and as per CPHEEO manual. The rates also include the carriage of GMS tubes from the JSV Divisional store Baggi to the site of work, butt welding of parent tube, fabrication of short pieces, bends, tees & other specials etc. from parent tubes, flushing, cleaning & hydraulic testing complete in all respect with in all leads & lifts as per direction and entire satisfaction of the Engineer in Charge. (Earth work to be measured and paid for separately). | |||||
| 2.01 | 50 mm dia (MC) | 530 | Rmt. | - | - |
| 3Laying, jointing, testing and Carriage of GMS tubes (Light Grade) in trenches including tube fitting such as bends, tees, air valves, unions and collars etc complete (Earth work to be measured and paid for separately) complete in all respect with in all leads & lifts as per the entire satisfaction & directions of Engineer-in-Charge. | |||||
| 3.01 | 25 mm dia (LC) | 450 | Rmt. | - | - |
| 4Providing and fixing of GI Union (Heavy Duty) ISI marked as per IS:1879:2010 (Third revision) (Malleable Cast Iron Pipe Fittings) with latest ammendments of following diameter mentioned below complete in all respect with in all leads and lifts and to the entire satisfaction of the Engineer-in-Charge. | |||||
| 4.01 | 25 mm dia | 30 | Nos. | - | - |
| 4.02 | 15 mm dia | 30 | Nos. | - | - |
| 5Providing and fixing of GI Nipple (Heavy Duty) ISI marked (UNIK make) with latest ammendments of following diameter mentioned below complete in all respect with in all leads and lifts and to the entire satisfaction of the Engineer-in-Charge. | |||||
| 5.01 | 25 mm dia | 30 | Nos. | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.67 MB
FORM6_1.pdf
Tender Documents • 0.63 MB
TC.pdf
Tender Documents • 0.15 MB
BOQ_220347.xls
BOQ • 2.15 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .