Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹32.5 LAccepted-AOC KHATA NO 254 529 KHASRA NO 364 2 MIN PREET NAGAR A GALI NO 2 HARERI ROAD OPP STAR STUDIO HERARI SANGRUR | SANGRUR | SANGRUR | PUNJAB | L1 | Accepted-AOC Being lowest | |
| 2 | L2₹34.8 L+₹2.3 L (7.15%)Rejected-Finance | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹35.0 L+₹2.5 L (7.84%)Rejected-Finance RAJKOT ROAD AIR FORCE STATION HALWARA 141106 PUNJAB | HALWARA | LUDHIANA | PUNJAB | 141106 | L3 | Rejected-Finance Other than lowest |
Tender Value
₹38.5 L
EMD Value
₹77,000
Closing Date
26 Dec 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) HALWARA
GE (AF) HALWARA
PROVN OF CERTIAN B/R AND E/M SANCTIONED WORKS AT AF STATION HALWARA
2023_MES_628228_1
GE/HAL-49/2023-24
Open Tender
Civil Works
Item Rate
183 days
GE (AF) HALWARA
MES ENLSTED CONTRATORS CLASS D AND CATEGORY a(i) and b(i)
9 documents required · 9 mandatory
₹500
Yes
GE (AF) HALWARA
₹77,000
Yes
6 Feb 2024
14 Nov 2023
28 Dec 2023
14 Nov 2023
26 Dec 2023
11 Dec 2023
Amount
Surface Excavation in Soft/loose soil n.exc 30 cm deep and averaging 15 cm deep and getting out complete as all specified and directed.
Surface Excavation in Hard/dense soil n.exc 30 cm deep and averaging 15 cm deep and getting out complete as all specified and directed.
Excavation in trenches n exc. 1.5m wide and n exc. 1.5m in depth for foundation etc. and getting out in soft / loose soil complete all as specified and directed.
Excavation in post holes (or similar holes ) each n.exc 0.50cum, and getting out, returning filing in and ramming earth with broken rubble mixed with earth around in layers n.exc 25cm, watering etc and removing surplus soil n.exc 50m and making good surface in loose/ soft soil complete all as specified and directed.
Returning, filling in (soil), including spreading, leveling, watering and well ramming in layers not exc. 25cm complete all as specified and directed.
Removing excavated material to a distance not exc. 50m and depositing where directed at a level n exc 1.50 above the starting point complete all as specified and directed.
Removing excavated material exc. 250m but n. exc. 500m and depositing where directed at a level n exc 1.50 above the starting point complete all as specified and directed.
Removing excavated material exc. 1.50 Km but n exc. 5 Km and depositing where directed at a level n exc. 1.5 m above the starting point all as specified and directed.
M&L for cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregates) as in foundations, filling and mass concrete etc complete all as specified and directed.
M&L for brick work using old size sub class ‘B’ bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6 complete all as specified and as directed.
M&L for rendering 15mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces and finished even and smooth without using extra cement complete all as spcified as as directed.
M&L for rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces, mixed with water proofing compound @ 3% by weight of cement and finished fair and even without using extra cement complete all as spcified as as directed. Note : Water proofing compound shall be measured seperately as supply only under respective items of this BOQ.
Supply only integral water proofing compond
M&L for hardcore of broken stone boulders of gauge n exc 63mm,deposited,spread and levelled in layers n exc 15cm thick,watered and rammed to a true surface complete all as specified and directed.
M&L for 100mm thick PCC (1:4:8) type D2 (using 40 mm graded mechanically crushed stone aggregate) as in sub base below pavings, floors, paths etc complete all as specified and directed.
M&L for 25mm thick PCC 1:2:4 type B0 (12.5mm graded mechanically crushed stone aggregate) in floor finished even and smooth without using extra cement complete all as specified and directed.
M&L for 75mm thick cement concrete type B-1, 1:2:4 (20mm graded stone aggregate) finished even and smooth without using extra cement all as specified and directed.
M&L for 75mm thick cement concrete type C-2, 1:3:6 (40mm graded stone aggregate) as in plinth protections all around buildings including finishing the surfaces fair and even without using extra cement complete all as specified and directed.
M&L for fine sand filling under floors or in foundation including watering and consolidation complete all as specified and directed.
M&L for 80mm thick (M-40 grade) Machine pressed precast concrete interlocking paver blocks with grey cement and pigments, any shape and size confirming to IS 15658-2006 complete all as specified and directed.
M&L for PCC 1:2:4 type B-1( using 20mm graded stone aggregate) as in bed plates, coping, kerbs, water trough and like including rounded or chamfered on edges complete all as specified and directed.
M&L formwork to fair finished surfaces of soffit of suspended slabs such as flat roof slab, floor slab, landing and similar work not exc 200mm thick (Horizontal or sloping) complete all as specified and directed.
M&L for mild steel TMT bars 10mm dia and over, cut to length bent to shape required including cranking ,bending spirally for hooping for columns hooking bends and binding with including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed
All as per Sl item No 23 above but 6 to 8 mm dia
M&L for PCC 1:1.5:3 type A-1 using 20mm graded stone aggregate as in slabs supported on wall, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shleves and the like complete all as specified and directed.
M&L for cutting holes in brick walls exceeding half brick but not exceeding one brick built in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregates) and finishing the surfaces to adjoining surfaces complete all as specified and directed.
S&F1.25mm thick pressed steel door frames of size 125x60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. and filling the hollow portion of frame with PCC 1:3:6 type C-0 (using 12.5mm graded mechanically crushed stone aggregates) complete all as specified and directed. Note : Butt hinges shall be measured seperately as supply only.
S&F 35 mm thick 2nd class hard wood glazed or skelton shutter factory made open rebated prepared to receive glass, gauge etc. without sash bars edges of framing plain fitted with cut & mitred beads for securing glass etc size of member all as per clause 8.24 (a) of SSR part-I complete all as specified and directed.
S&F 150mm long Aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed.
S&F 150mm size Aluminium handles fabricated type extruded section complete all as specified and directed.
Supply only 100 mm size butt hinges medium weight cold rolled mild steel complete all as specified and directed.
S&F steel ventilator with centre hung shutters including two pairs of brass cup pivots, catch spring and pully wheel etc complete all as specified and directed.
S&F 4mm thick figured glass, pinhead ordinary quality, in square n. exc 0.5 sqm in each pane and fixed with oil putty/wooden beads etc complete all as specified and directed.
M&L for glazed ceramic coloured tiles of size 450x350x7mm thick on vertical surfaces set and jointed with neat cement slurry and pointed in white/coloured cement to match the shade of tiles over and inlcuding 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.
M&L for Non skid jointless cerermic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exc 0.11 Sqm but n.exc 0.18 Sqm in neat cement slurry and pointed in white or coloured cement with pigment to match over and including15mm thick screed bed in CM 1:6 complete all as specified and directed.
S&F 20 mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed.
S&F 15mm bore GI water tubing medium grade galvanised with all fitting etc fixed to walls, laid in floors or ceilings complete all as specified and directed.
All as per Sl item No 37 above but 20mm bore
S&F 20mm bore stop valves, cast copper alloy, screwed down, high pressure with crutch or butterfly handle etc complete all as specified and directed.
S&F 15mm bore stop valves, fancy type, cast copper alloy, screwed down, high pressure with crutch or butterfly handle etc complete all as specified and directed.
S&F 15mm bore bib tap brass, fancy type, cast copper alloy with crutch or butter fly handle complete all as specified and directed.
S&F vitreous china wash basin, white flat back size 550x400mm including cutting for and pinning in ends of brackets or erecting stand including 15mm bore CP fancy type pillar tap, waste chain, waste pipe 600mm long and 32mm waste fitting brass, chromium plated with long screwed shanks and fly nuts and fixed complete all as specified and directed.
S&F wash down water closet (Pedestal pattern) including seat cover and stainless steel water jet including connection to drain pipe (outgoing pipe) and to flush pipe, antisyphonage pipe etc complete all as specified and directed.
S&F towel rail 600mm long of PTMT fixed with and including chromium plated brass screws and woode/plastic cleats complete all as specified and directed.
S&F 10 Ltrs capacity PVC valve less symphonic action type flushing cistern, low level white with inlet ball valve float and handle with flush pipe complete all as specified and directed.
S&F 15mm dia PVC connection 450 mm long with PTMT nuts complete all as specified and directed.
S&F shelf of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats complete all as specified and directed.
S&F vitreous china urinal half stall type white (minimum) with grating and union for discharge pipe (excluding flushing cistern and flush pipe and waste pipe) but including providing and fixing plugs, beding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws pointing around urinal back including waste coupling and discharge pipe complete all as specified and directed.
S&F Urinal spreader of cast copper alloy and fixing of 15mm bore pipe complete all as specified and directed.
S&F soap dish vitreous china white approximate size 160x160x90mm etc complete all as specified and directed.
S&F health faucet mild steel chromium plated suitable for 15mm dia etc complete all as specified and directed.
S&F 500 Ltrs capacity rotational moulded polyethylene (Double wall construction) water storage tank (cylindrical vertical with closed top) hoisted and fixed in position including 20mm ball brass valve high pressure, with polythene float and fly nut complete all as specified and directed.
M&L for mild steel 20mm dia screw bolt (machine made) with hexagonal square head at one end and screwed the other, or screwed both end each screwed end to be fitted with washer and one hexagonal or square but n exc. 5cm long etc complete all as specified and directed.
S&F rolled mild steel roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe-410 (Gde E-250) complete all as specified and directed.
S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixing with self taping screws complete all as specified and as directed.
S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixing with self taping screws complete all as specified and as directed.
M&L cement concrete type C-1, 1:3:6 (20mm graded stone aggregate) in lintel upto 1.5m clear span, cill, seismic and other similar bands, plingth course string course lacing course, padestal, parapets and railing upto 60cm in height, copings, kneelers, apex stones, bed plate etc complete all as specified and directed.
S& F 110mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.
S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floor complete all as specified and directed.
S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floor complete all as specified and directed.
S & F 110mm bore PVC (SWR) bends complete all as specified and directed.
S & F 75mm bore PVC (SWR) bends complete all as specified and directed.
M&L for 75mm outlet dia PVC (SWR) multi floor trap, plain with grating including joint and solvent cement complete all as specified and directed.
M&L for PVC (SWR) gully trap 125/110mm setting and jointing with solvent cement complete all as specified and directed.
M&L for 150mm internal bore dia Reinforced concrete pipes, class NP3 laid in trenches and jointed and testing complete with collars complete all as specified and directed.
M&L for cement concrete (1:4:8) type D-2 (using 40mm graded stone aggregates) as in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150mm bore pipe line complete all as specified and directed.
M&L for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l (using 20mm graded stone aggregates) smooth finished and reforming benching as required for 150mm internal dia of pipe complete all as specified and directed.
M&L for pre-cast cement concrete (1:2:4), type B1 (using 20mm graded stone aggregate) as in cover slab for tank staging , manhole cover and similar article with plane face, set in cement mortar 1: 4 complete all as specified and directed.
S&F framed work as in door frames or gates of angle or other section with gusset plates, rails, braces, etc complete, drilled for fixing of steel sheeting or other covering. Doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (Exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing complete all as specified and directed.
M&L for 0.63mm thick mild steel plain black sheet in wall cladding, steel gates and similar work, cut to size, holes punched, including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joint with rieveted or welded seams including bending and turning up complete all as specified and directed.
M&L for preparation of new plastered surfaces of wall and applying two coats of distemper oil emusion of any tint over a coat of birla putty and primer complete all as specified and directed.
M&L for preparation of new plastered surfaces of wall and applying two coats of cement base paint complete all as specified and directed.
M&L for chequerred cement concrete tiles rubber finish of size 30cmx30cmx25mm thick with grey cement and pigments, set , jointed and pointed in neat cement slurry in floors over and including 20mm thick screed bedding in cement mortar 1:6 complete all as specified and directed.
Supply and installation of grease separator plant suitable for underground installation. The Grease Separator should be made from polyethylene for longer life. The Grease Separator should have nominal capacity not less than 930 Ltrs with Inlet/ Outlet socket of nominal dia of minimum 100mm with grease storage capacity of minimum 270 ltrs and sludge storage capacity of minimum 460 ltrs. Total weight of grease separator should be minimum 81 kg with overall dimension of atleast 1320mm x 1595 mm (Dia X Ht). The Grease Separator should be capable of cleaning via shaft manhole cover, emptying via suction line nominal dia of minimum 65mm and nominal pressure of 10 kg with couplings for two-sided thread connection 75/75 mm for suction line, fire hose quick coupling 75 B and 2 1/2 blank cap and Counter flange with fire hose quick coupling 75 B and 2 1/2 black cap. Top cover of the Grease Separator plant should be made from concrete frame with cast iron cover having clear opening of minimum 600 mm diameter. The cover should be odour-free when closed. The weight of the cover should be 145 kg and manufactured to meet 1.50 ton load class requirement. Make ACO Passavant ,Model No NS4 Grease Separator plant or equivalent model in Saniflo, Kingspan Klargester as approved by GE. Notes : (i) The contractor will the drawings of grease trap & fittings from the manufacturers and will submit to the GE through Engr-in-Charge for approval before procurement. (ii) Installation, commissioning and testing of grease trap will be executed by OEM/their authorised rep. (iii) All work of grease traps item will be carried out by the rep of OEM in presence of Engr-in-Charge. (iv) The rate shall be included for supply & installation, providing three days training for operation/function as per DIN EN 1825 and DIN 4040 100 suitable for underground installation.
Mechanical drilling for main bore well 125 mm dia below ground level upto a depth of 100 mtr in any kind of soil complete including compressing the following :- (a) M&L Column pipe PVC 100 mm dia heavy duty grade for casing of bore well complete including all fittings-100 RM. (b) Supply installation,testing and commissioning of submersible pump set 2 HP single phase 240 volts 50 HZ outer dia of pump set 40 mm and including suitable size of starter-01 Each. (c) S &F PVC insulated copper conductor flat type submersible cable 2.5 sqmm 3 core 1100 volt grade including clip for fixing of cable -55 RM. (d) S&F 40mm dia bore high density polethylene pipes (HDPE) of pressure rating 6 kgf/sqcm laid in trenches/ borewell complete all as specified and directed = 50 RM (e) S & F NRV valve size 40 mm dia Each = 01 Nos. (f) S & F gunmetal gate valve of size 40 mm dia each=01 Nos (g) MCB SPN 40 Amp-01 Nos. (h) Supply and fixing single phase motor starter 2.0 HP relay 8.9-13.5 contactor rating 16 Amp SPS with 2 P contactor + overload relay (Ammeter+Voltmeter) with 160-220 V AC coil Suitable for Submersible motor upto cap 2 HP-01 Nos
Supply and laying 25mm bore steel water tubing GI medium grade with all fittings laid in trenches or fixed to wall etc complete all as specified and directed.
Supply and fixing Gun metal gate valve size 25mm with iron wheel head screwed both ends for iron pipes complete all as specified and directed.
Supply, fixing, commissioning and testing of movement detector (PIR sensor) of LEGRAND cat part No 048817 for lighting control system with 180-360 degree detection angle or equivalent cat part No of Schnieder/Siemens as approved by GE complete all as specified & directed.
Supply, fixing, commissioning and testing of power contractor 25 Amp, 230 Volts of LEGRAND cat part No 412544 for lighting control switches or equivalent cat part No of Schnieder/Siemens as approved by GE complete all as specified & directed. Note for Item No 79 & 80 : (i) The payment against Sl item No 79 & 80 above will be made after satistactory testing at each location. (ii) Test certificate duly signed by Contractor, JE (E&M) & Engr-in-Charge will be submitted for apporval of GE before claiming payment.
Supply and fixing of factory made powder coated distrubution board modular type SPN 4 way single door, IP 43 including bus bar, neutral bar, standard DIN rail each bar suitable for fixing DP, contractor and MCB complete all as specified and directed
M & L for submain wiring for circuit complete with 2 x 1.5 Sqmm single core PVC insulated, unsheather FRLS 1100 volt grade multi stranded copper conductor cable drawn through and including suitable size PVC casing capping and accessories complete fixed surface to wall/roof/ceiling etc and including 1 x 1.5 sqmm single core PVC insulated, unsheathed FRLS 1100 V grade multi stranded copper condutor cable as earth continuity conductor etc complete all as specified and directed.
M & L for submain wiring for circuit complete with 2 x 2.5 Sqmm single core PVC insulated, unsheather FRLS 1100 volt grade multi stranded copper conductor cable drawn through and including suitable size PVC casing capping and accessories complete fixed surface to wal/roof/ceiling etc and including 1 x 2.5 sqmm single core PVC insulated, unsheathed FRLS 1100 V grade multi stranded copper condutor cable as earth continuity conductor etc complete all as specified and directed.
M & L for submain wiring for circuit complete with 2 x 4.00 Sqmm single core PVC insulated, unsheather FRLS 1100 volt grade multi stranded copper conductor cable drawn through and including surface 25mm dia PVC conduit (heavy duty) and accessories complete fixed surface to wal/roof/ceiling etc and including 1 x 4.00 sqmm single core PVC insulated, unsheathed FRLS 1100 V grade multi stranded copper condutor cable as earth continuity conductor etc complete all as specified and directed.
S & F DP, 240 volts of capacity 32 A complete all as specified and directed.
S & F MCB SP, 'B' Series, 240 volts of capacity 6-32 Amp complete all as specified and directed.
Supply, laying and testing cable XLPE Insulated ,stranded aluminium conductor 70 Sqmm 3.5 Core, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade,confirming to IS7098(Part1)1988 as in replacement complete all as specified and directed.
M&L for sand cushioning with a layer of sand 8 cm thick before laying of cable and 15 cm thick after laying of cable in trenches all around the cable complete all as specified and directed. Note : Punned thickness 18 cm only shall be measured for payment.
M&L for bricks protection with sub class B Bricks (Designation 75) above/under ground cable complete all as specified and directed.
S&F 40mm dia bore light grade GI pipe with all fittings for cable protection and fixed to walls, panel, pole or laid in trenches and road crossings etc complete all as specified and directed.
M&L for heat shrinkable straight through joint for LT XLPE UG cables suitable for cable of size 70 to 95 Sqmm 3.5 core aluminium complete all as specified and directed.
M&L for earthing in replacement complete with galvanished steel earth plate electrode 60cmx60cmx3.15mm thick buried directly vertically in ground to depth not less than 2.25 mtr below ground level, with top edge of earth plate not less than 1.5 mtr below ground level surrounded from all sides by 15cm thick packed layer of charcoal dust & common salft filled in alternate layers and electrode connected to GI earth lead wire 4.00mm dia upto 7.5 mtr long by means of bolts, nuts, check nuts and washers of galvanised iron and connection to earthing test point & earth dolly and including watering pipe medium grade GI 20mm bore & protection pipe light grade GI 40mm bore, including wire mesh, funnel, lugs, salt, charcoal dust, excavation in any type of soil, returning filling & removal of surplus soil upto 50mtr, pit chamber shall be of PCC 1:2:4 type B-1 using 20mm graded mechanically crushed stone aggregates and pit cover slab 80mm thick shall be of pre-caste RCC 1:2:4 type B-1 using 20mm graded mechanically crushed stone aggregates reinforced with XPN weighing not less than 4 Kg/sqm including necessary form work complete all as shown in electrical plate No 3 of SSR Part-I including testing on completion at site complete all as specified and directed. NOTE : (i) Electrical Plate No. 3 reffered in the item above is mainly for earth chamber.
M & L for concealed Point wiring for light points with PVC insulated unsheathed FRLS two run of 1.5 Sqmm multi stranded copper conductor cable 1100 volts grade & one run of 1.5 Sq mm multi stranded copper conductor cable as continuous earth wire drawn in PVC conduit not less than 19/20 mm dia with all fittings shunk in MS Pressed steel terminal boxessuitable depth and 1.6mm thick (duly painted with two coat of anticorrosive paint outsite and Aluminium paint inside) with top cover 2.8 mm thick Hylem sheet cover for mounting of switches/sockets and fan regulators etc complete all as specified.
All as per Sl item No 93 above but for socket out 6 Amp controlled by one switch on the same board.
All as per Sl item No 93 above but for socket out 6 Amp controlled by one switch on the independent board.
All as per item No. 93 above but with 4.0 sq mm for one 15 Amps socket outlet on independent board and 2.5 sqmm PVC insulated multisranded copper conductor cable as continuous earth wire complete.
Supply and fixing Switch piano flush button single pole one way 15 amps 240 volts complete.
Supply and fixing Socket out let 2 in 1, 6 pin, 5 and 15 amps multi purpose flush type, 230 volts.
Supply and fixing Switch piano type one way 6 amps 240 volts complete.
Supply and fixing Socket outlet 5 pin 6 Amps flush type complete.
S&F LED light fitting, 20 W, 4 ft long 230V, Wall mounted LED batten, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver complete with all accessories internally pre-wired complete all as specified.
S&F sheet metal enclosure MCB SPN distribution board, 4 way, Double door with IP-43 protection single phase 240 volts, including suitable size copper bus bar and neutral link fixed flush concealed in wall including taking out old DB's and chases wall for fixing DB and making good distributed wall/surfaces to match with existing specification complete all as specified and directed.
M&L for copper pipe of 22mm dia suitable for existing pipe including brazing/welding, connecting and leak testing complete all as specified and directed.
Labour for dismantling of vaccume machine from existing location and commissioning the same to new location including all connected work such as shifting of DB box, starter etc and testing complete all as specified and directed.
M&L for preparation of new plastered surfaces of walls and applying three coat of white wash complete all as specified and directed.
M&L for preparation of new surfaces of steel over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed
M&L for preparation of new plastered surfaces of ceilings and applying two coats of white wash complete all as specified and directed.
M&L for preparation of new plastered surfaces of wall and applying two coats of synthetic enamel paint over a coat of primer in camouflage pattern, using minimum 3 different approved tint/colour as approved by GE complete all as specified.
BEHL AND COMPANY
M/S SANGA SINGH AND CO
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .