Development of Infrastructure Works (Erection of DTR, HTABC, HT UG

New 11 KV Lines using HT AB Cable-Materials

Supply of 9 Mtr PSC Pole as per technical specification, approved drawings and scope of work.

Pre-fabricated steel items like V cross arm, top clamp, DC cross arm, bracket, clamps, cross bracings, bracings, strain plate, guarding channels, back clamp, transformer mounting structure etc made of MS Channels (100x50x6mm), MS angle (65x65x6mm), MS flats (65x8mm) of given sizes for over head structures as per technical specification, approved drawings and scope of work.

MS Nuts, Bolts with Washers as per technical specification, approved drawings and scope of work.

Stay Set (Galvanised) with 50x8 mm stay clamp, stay insulator (2 Nos.), anchor plate (200x200x6), nut bolts, 2 Nos turn-buckles, 1.8 m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete as per technical specification, approved drawings and scope of work.

Earthing arrangement as per technical specificatons, approved drawings and scope of work. 40 mm dia., 3000 mm long GI pipe earth electrode with test link, RCC pit, RCC cover plates on GI frame, bentonite powder and other accessories complete as per technical specification, approved drawings and scope of work.

Earthing arrangement as per technical specificatons, approved drawings and scope of work. 8 SWG GI Coil 115 turn (1.85 kg)

Earthing arrangement as per technical specificatons, approved drawings and scope of work. 8 SWG GI wire, GI nuts, bolts & washers for earthing and guarding

12kV, 600A, 25kA for 3sec, 3-ph, 3 Pin type, Horizontal/Vertical Mounting type (as desired by DISCOM), Gang Operated, AB Switch along with Support Insulators, Base Channel down Pipe, Arcing Horns etc. complete as per technical specifications, scope of works and approved drawings

Supply, Testing and Commissioning of HT Aerial bunched 3X120 + 1X95 Sqmm XLPE cable required as per technical specification, approved drawings and scope of work:

Supply, Testing and Commissioning of MVT Kit For HT ABC as per technical specification, approved drawings and scope of work.

Supply, Testing and Commissioning of Heat Shrinkable Termination Kit (3 Nos) for 120 Sq.mm Three phase Aerial Bunched Cable as per technical specification, approved drawings and scope of work.

Supply, Testing and Commissioning of Anchoring /Dead end Clamp Assembly for HT AB Cables up to 120 sq.mm including SS strap, Buckles and etc,. as per technical specification, approved drawings and scope of work.

Supply, Testing and Commissioning of Suspension Clamp Assembly for HT AB Cables up to 120 sq.mm including SS strap, Buckles and etc,. as per technical specification, approved drawings and scope of work.

Supply of HT Danger Board as per technical specification, approved drawings and scope of work.

Description of Work / Item(s)

Erection, Testing and Commissioning APFC Panel- Labour

Design, Erection, testing and commissioning of APFC panel 11kV, 60KVAR, at DT locations with 5 Nos. of Stage contactors, including all civil works as per technical specification, approved drawings and scope of work.

Description of Work / Item(s)

Grand Total - Summary

TOTAL SCHEDULE NO- 1

New 11 KV Lines using HT AB Cable-Materials

New 11 KV Lines using 3Cx150Sqmm HT UG Cable -Materials

Distribution Transformer Substations -Materials

Replacement of Old Distribution Transformers -Materials

APFC Panel -Materials

Plant and Equipment

TOTAL SCHEDULE NO. 2

Erection, testing and Commissioning of New 11 KV lines using HT AB Cable- Labour

Erection of New 11 KV Lines using 3Cx150Sqmm HT UG Cable- Labour

Erection, Testing and Commissioning of new Distribution Transformer Substations- Labour

Erection, Replacing , Testing and Commissioning of Old Distribution Transformers- Labour

Erection, Testing and Commissioning APFC Panel- Labour

Installation / Erection Charges

TOTAL [8+15]

Discount offerred by Bidder(If any) (To be entered manually)

Schedule No 3: GRAND TOTAL [16 - 17]

Description of Work / Item(s)

Erection, testing and Commissioning of New 11 KV lines using HT AB Cable- Labour

Survey, route alignment & pole spotting, preparation of survey report and uploading in the GIS web portal after approval of Project Manager

Excavation of pole pit (of depth 1/6th of pole length) in normal soil as per scope of work, approved drawings and specifications: 9 Mtr PSC Pole

Excavation of pole pit (of depth 1/6th of pole length) in soft rock where blasting is not required as per scope of work, approved drawings and specifications: 9 Mtr PSC Pole

Erection of following types of poles for 11 KV overhead line by providing and installing danger plate, earthing material (coil and 8SWG GI wire), red oxide & aluminium paint, pole numbering including cement concrete foundation or refilling by bolders using cement concreting foundation 1 part cement, 3 part sand, 6 part 40 mm size stone aggregate chips (1:3:6) or/and 200 mm average size bolders mixed with excavated earth etc as per scope of work, approved drawings and specifications: 9 Mtr PSC Pole

Erection, testing & commissioning of pre- fabricated galvanised steel items like V cross arm, top clamp, DC cross arm, bracket, clamps, cross bracings, bracings, strain plate, guarding channels, back clamp, etc made of GS Channels, GS angle, GS flats of given sizes for over head structures and GS nuts, bolts & washers including painting by red oxide & aluminium paint as per technical specification, approved drawings and scope of work.

Earthing arrangement as per technical specificatons, approved drawings and scope of work. Excavation, erection, testing & commissioning of 40 mm dia., 3000 mm long GI pipe earth electrode with test link, RCC pit, RCC cover plates on GI frame, Charcoal, Salt and other accessories complete

Earthing arrangement as per technical specificatons, approved drawings and scope of work. Erection of 8 SWG GI Coil 115 tonnes (1.85 kg)

Earthing arrangement as per technical specificatons, approved drawings and scope of work. Erection of 8 SWG GI wire for earthing and guarding by providing GI nut, bolts & washers, turn buckle etc

Excavation of stay pit in following type of soils, as per scope of work, approved drawings and specifications: Normal soil

Excavation of stay pit in following type of soils, as per scope of work, approved drawings and specifications: Soft rock soil where blasting is not required

Erection of complete stay set with GI stay wire (7x3.15 mm dia), binding of stay wire, by providing Guy stay insulator (2 Nos.) and 0.2 cmt concreting 1 part cement, 3 part sand, 6 part 40 mm size stone aggregate chips (1:3:6) as per technical specifications, approved drawings and scope of works.

Erection, Testing and Commissioning of 11 kV AB Switch along with Support Insulators, Base Channel, down Pipe, Arcing Horns etc. complete as per technical specifications, scope of works and approved drawings

Erection, testing and Commissioning of HT line with following arrangements using areal bunched XLPE cable including tension clamps for dead end, suspension clamps, clamps for neutral, etc as required as per technical specification, approved drawings and scope of work: HT AERIAL BUNCHED XLPE CABLE 3 X 120 +1 x 95 SQ.MM

Erection, testing and commissioning of MVT Kit For HT ABC as per technical specification, approved drawings and scope of work:

Erection, testing and commissioning of Heat Shrinkable Termination Kit (3 Nos) for 120 Sq.mm Three phase Aerial Bunched Cable as per technical specification, approved drawings and scope of work:

Description of Work / Item(s)

New 11 KV Lines using 3Cx150Sqmm HT UG Cable -Materials

Supply of 11kV 3C 150 Sqmm XLPE UG cable as per technical specification, approved drawings and scope of work.

Supply of Heat Shrinkable Stright through joint kit for 11kV 3C 150 Sqmm XLPE UG cable as per technical specification, approved drawings and scope of work.

Supply of Outdoor Heat Shrinkable End termination kit for 11kV 3C 150 Sqmm XLPE UG cable as per technical specification, approved drawings and scope of work.

Supply of Indoor Heat Shrinkable End termination kit for 11kV 3C 150 Sqmm XLPE UG cable as per technical specification, approved drawings and scope of work.

Supply of 100mm Dia Medium Class GI Pipe with accessories as per technical specification, approved drawings and scope of work.

Pre-fabricated steel items like V cross arm, top clamp, DC cross arm, bracket, clamps, cross bracings, bracings, strain plate, guarding channels, back clamp, transformer mounting structure etc made of MS Channels (100x50x6mm), MS angle (65x65x6mm), MS flats (65x8mm) of given sizes for over head structures as per technical specification, approved drawings and scope of work.

MS Nuts, Bolts with Washers as per technical specification, approved drawings and scope of work.

Description of Work / Item(s)

Erection of New 11 KV Lines using 3Cx150Sqmm HT UG Cable- Labour

Survey, design, route alignment, preparation of survey report and uploading in the GIS web portal after approval of Project Manager

Earth work excavation in all classes of soil for a depth of 1 mtr as per site conditions and width of 0.3 mtr without damaging the existing cable, pipeline and other installations, by providing barricades and observing safety precautions, shoring of pits and dewatering the trench wherever necessary, spreading the bottom of trench with 10cm filling sand, and after laying of cable, filling with sand on both sides of the cable and on the top to a level of 10cm above the cable, covering the same with 2nd class brick protection (Approx. 10 bricks per meter length of laying), back filling the trench with excavated earth or any other method as per the instruction of local authority, watering, consolidating in layers of 15 cm disposing surplus earth and debris after refilling, including laying GI pipe at road crossings and at locations where sufficient depth could not be achieved due to other obstructions, providing cable route markers at 100 m interval and meggering, providing loops wherever necessary, testing and commissioning and submission of final as built cable route drawings in GIS web portal after approval of Project Manager, including the cost of all materials, labour, charges for transporting, handling, uncoiling and paving of cable in trenches using standard cable laying/pulling/winch equipments, etc except that of 3 core 150 Sqmm XLPE UG cable, Straight through joint kit as per technical specification, approved drawings and scope of work.

Laying of Cable in the Existing Duct/trench and crossing Culverts (including laying and fixing of GI Pipe in culverts) and meggering, providing loops wherever necessary, testing and commissioning and submission of final as built cable route drawings in GIS web portal after approval of Project Manager, including the cost of all materials, labour, charges for transporting, handling, uncoiling and drawing of cable in duct using standard cable laying/pulling/winch equipments, etc except that of 3 core 150 Sqmm XLPE UG cable as per technical specification, approved drawings and scope of work.

Horizontal directional drilling along/ across roads, supplying and pulling 110mm dia HDPE pipe duct, in no case the depth of boring be less than 1.2m from ground level along/across road and 2m from ground level under railway track, pit making, pilot drilling, pre reaming, cable laying, closing of pits with normal soil and consolidation or by any method as directed by road authorities, without damaging other utility installations, providing HDD route markers at pit locations as per the direction of TCED officers and meggering, providing loops wherever necessary, testing and commissioning and submission of final as built cable route drawings in GIS web portal after approval of Project Manager, including the cost of all materials, labour, charges for transporting, handling, uncoiling and paving of cable in duct using standard cable laying/pulling/winch equipments, etc except that of 3 core 150 Sqmm XLPE UG cable (Measurement will be taken only after cable laying) as per technical specification, approved drawings and scope of work.

Erection, testing & commissioning of Clamps for fixing of Cable in Pole/DP and etc for over head structures using GI nuts, bolts & washers including painting by red oxide & aluminium paint as per technical specification, approved drawings and scope of work.

Erection, Termination, Testing and Commissioning of Heat shrink type Outdoor end termination kit suitable for 11 kV XLPE 3Cx150 Sqmm Aluminium Conductor Armoured cable as specified with connection of leads including cutting,stripping of cable, insulations, providing compression type terminals,crimping of lugs with suitable crimping tool, as per technical specification, approved drawings and scope of work.

Erection, Termination, Testing and Commissioning of Heat shrink type Indoor end termination kit suitable for 11 kV XLPE 3Cx150 Sqmm Aluminium Conductor Armoured cable as specified with connection of leads including cutting,stripping of cable, insulations,providing compression type terminals,crimping of lugs with suitable crimping tool, as per technical specification, approved drawings and scope of work.

Making Straight through joint, Testing and Commissioning of Heat Shrinkable Stright through joint kit for 11kV 3C 150 Sqmm XLPE UG cable Aluminium Conductor Armoured cable as per technical specification, approved drawings and scope of work.

Tapping supply from T module of RMU / OH network to Transformer / OH network and drawing cable neatly along the pole in 100 mm Dia GI pipe for a height of 3 m, fixed neatly using suitable clamps and providing jumper connections with crimping sockets, brass bolts & nuts with washers as per technical specification, approved drawings and scope of work.

Description of Work / Item(s)

Distribution Transformer Substations -Materials

Supply of 12Mtr A Type Pole as per technical specification, approved drawings and scope of work.

Design, Supply of 12Mtr Lattice Pole(45Cmx45Cm) as per technical specification, approved drawings and scope of work.

Pre-fabricated Hot dip galvanised steel (zinc coating 610gms/sqm), items like DC cross arm (100x50x6 mm), back clamps (65x8 mm), pole clamp (65x8 mm), DO mounting channel (100x50x6 mm), transformer mounting channel (100x50x6 mm) etc as per technical specification, approved drawings and scope of work.

GS Nuts, Bolts with Washers as per technical specification, approved drawings and scope of work.

Stay Set (Galvanised) with 50x8 mm stay clamp, stay insulator (2 Nos.), anchor plate (200x200x6mm), nut bolts, 2 Nos turn-buckles, 1.8 m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete as per technical specification, approved drawings and scope of work.

Polymer/ Porcelain Insulators with hardware fittings, hardware etc as required as per technical specification, approved drawings and scope of work. 11 KV, Pin Insulators with hardware fittings

New Distribution Transformer (three Star) with all accessories as per as per technical specification, approved drawings and scope of work. 11/0.4 KV Distribution Transformer 25 KVA 3 phase Aluminium wound DTR

New Distribution Transformer (three Star) with all accessories as per as per technical specification, approved drawings and scope of work. 11/0.4 KV Distribution Transformer 63 KVA 3 phase Aluminium wound DTR

Design, Supply of Outdoor mounting type SMC Distribution Box (50cm x 50cm x 30cm), dust and moisture vermin, weather proof with degree of protection with suitable HRC Base, Fuse Link, Neutral Link, front door operated with proper locking arrangement with phase indicating lamps, lugs, mounting channel frame, danger plate, numbering, back clamps, hardware as per scope of the work and approved drawings suitable for following transformer: 3 Ph 25 KVA Transformer having 63A HRC Fuse with 100A Fuse base, Neutral link

Design, Supply of Outdoor mounting type SMC Distribution Box (50cm x 50cm x 30cm), dust and moisture vermin, weather proof with degree of protection with suitable HRC Base, Fuse Link, Neutral Link, front door operated with proper locking arrangement with phase indicating lamps, lugs, mounting channel frame, danger plate, numbering, back clamps, hardware as per scope of the work and approved drawings suitable for following transformer: 3 Ph 63 KVA Transformer having 100A HRC Fuse with 200A Fuse base, Neutral link

11 KV Distribution Class Lightening Arrester for DT (3 Nos) as per technical specification, approved drawings and scope of work.

11 kV, 3-ph, 200 A, 3 Pin polymeric type, Horizontal/Vertical Mounting type (as desired by DISCOM), Gang Operated, AB Switch along with Support Insulators, Base Channel, down Pipe, Arcing Horns etc. complete as per technical specifications, scope of works and approved drawings

11 kV, 3-ph, Drop Out fuse units (set of 3 units) along with Support Insulators, Base Channel, fuse barrel etc. complete as per technical specifications, scope of works and approved drawings

3 Nos pipe earthing using 40mm dia GI pipe 3000 mm long, making earth grid as per scope of work of Distribution Transformer Substations, as per scope of work, approved drawings and technical specifications,

8 SWG GI wire for earthing as per technical specifications, approved drawings and scope of works.

1.1 KV XLPE Aluminium Conductor, Stranded, unarmoured cable for connection of transformer LV bushing to Distribution Box as per Scope of work, technical specification and approved drawings: 1Cx70 sqmm aluminium conductor cable

ACSR Rabbit Conductor for jumpering including PG Clamps, bi- metallic connectors, hardware etc as per technical specifications, approved drawings and scope of works.

Supply of HT Danger Board as per technical specification, approved drawings and scope of work.

Supply of DTR Name Board as per technical specification, approved drawings and scope of work.

Description of Work / Item(s)

Erection, Testing and Commissioning of new Distribution Transformer Substations- Labour

Excavation of pole pit (of depth 1/6th of pole length) in normal soil as per scope of work, approved drawings and specifications: 12Mtr A Type Pole

Excavation of pole pit (of depth 1/6th of pole length) in normal soil as per scope of work, approved drawings and specifications: 12Mtr Lattice Pole

Excavation of pole pit (of depth 1/6th of pole length) in soft rock where blasting is not required as per scope of work, approved drawings and specifications: 12Mtr A Type Pole

Excavation of pole pit (of depth 1/6th of pole length) in soft rock where blasting is not required as per scope of work, approved drawings and specifications: 12Mtr Lattice Pole

Erection of following types of poles for 11/0.4 KV Distribution transformer substation by providing and installing danger plate, earthing material (coil and 8SWG GI wire), red oxide & aluminium paint, pole numbering including cement concrete foundation 1 part cement, 3 part sand, 6 part 40 mm size stone aggregate chips (1:3:6) etc as per scope of work, approved drawings and specifications: 12Mtr A Type Pole

Erection of following types of poles for 11/0.4 KV Distribution transformer substation by providing and installing danger plate, earthing material (coil and 8SWG GI wire), red oxide & aluminium paint, pole numbering including cement concrete foundation 1 part cement, 3 part sand, 6 part 40 mm size stone aggregate chips (1:3:6) etc as per scope of work, approved drawings and specifications: 12Mtr Lattice Pole

Excavation of stay pit in following type of soils, as per scope of work, approved drawings and specifications: Normal soil

Excavation of stay pit in following type of soils, as per scope of work, approved drawings and specifications: Soft rock soil where blasting is not required

Erection of complete stay set with GI stay wire (7x3.15 mm dia), binding of stay wire, by providing Guy stay insulator (2 Nos.) and 0.2 cmt concreting 1 part cement, 3 part sand, 6 part 40 mm size stone aggregate chips (1:3:6) as per technical specifications, approved drawings and scope of works.

Erection, testing, commissioning of Pre-fabricated steel items like DC cross arm (100x50x6 mm), back clamps (65x8 mm), pole clamp (65x8 mm), DO mounting channel (100x50x6 mm), transformer mounting channel (100x50x6 mm), transformer clamping set (50x50x6 mm), transformer belting set ( 50x50x6 mm) and MS nuts, bolts & washers including painting by red oxide & aluminium as per technical specification, approved drawings and scope of work.

Erection, testing and commissioning of 11 kV insulator including their hardware fittings as per technical specification, approved drawings and scope of work. 11 kV Pin insulator with GI pin

Erection, Testing and Commissioning of Distribution Transformer with all accessories as per scope of work, approved drawings and specifications: 11/0.4 KV Distribution Transformer 25 KVA 3 phase Aluminium wound DTR

Erection, Testing and Commissioning of Distribution Transformer with all accessories as per scope of work, approved drawings and specifications: 11/0.4 KV Distribution Transformer 63 KVA 3 phase Aluminium wound DTR

Erection, testing and Commissioning of Outdoor mounting type SMC Distribution Box (50cm x 50cm x 30cm), dust and moisture vermin, weather proof with degree of protection with suitable HRC Base, Fuse Link, Neutral Link, front door operated with proper locking arrangement, lugs, mounting channel frame, danger plate, numbering, back clamps, hardware as per scope of the work and approved drawings suitable for following transformer: 3 Ph 25 KVA Transformer having 63A HRC Fuse with 100A Fuse base, Neutral link

Erection, testing and Commissioning of Outdoor mounting type SMC Distribution Box (50cm x 50cm x 30cm), dust and moisture vermin, weather proof with degree of protection with suitable HRC Base, Fuse Link, Neutral Link, front door operated with proper locking arrangement, lugs, mounting channel frame, danger plate, numbering, back clamps, hardware as per scope of the work and approved drawings suitable for following transformer: 3 Ph 63 KVA Transformer having 100A HRC Fuse with 200A Fuse base, Neutral link

Erection, testing and Commissioning of 3 Nos pipe earthing using 40mm dia GI pipe 3000 mm long, as per IS 1161, making earth grid using 50x6mm GI Flat and riser and connecting risers to various equipment as per scope of work, approved drawings and technical specifications,

Erection, testing and commissioning of 8 SWG GI wires as per Scope of work, technical specification and approved drawings

Erection, testing and Commissioning of 1.1 KV XLPE Aluminium Conductor, Stranded, unarmoured cable for connection of transformer LV bushing to Distribution Box as per Scope of work, technical specification and approved drawings: 1Cx70 sqmm aluminium conductor cable

Erection, testing and commissioning of ACSR Rabbit Conductor for jumpering including PG Clamps, bi- metallic connectors, hardware etc as per Technical Specification, approved Drawing & Scope of works

Erection, testing and Commissioning of 12 KV, 200 A, 3-pole AB Switch for Distribution Transformer Substation as per Technical Specification, approved Drawing & Scope of works

Erection, testing and commissioning of 9 KV, 10 KA Distribution Class Lightening Arrester for DT as per technical specification, approved drawings and scope of work.

Erection, testing and commissioning of 11 kV, 3-ph, Drop Out fuse units (set of 3 units) along with Support Insulators, Base Channel, fuse barrel etc. complete as per technical specifications, scope of works and approved drawings

Description of Work / Item(s)

Replacement of Old Distribution Transformers -Materials

Replacement of old Distribution Transformer Substation using new outdoor type, oil immersed, distribution transformer up to and including 2500 KVA as per IS1180 (Part-1): 2014 and its amendments 1, 2, 3 and 4, CRGO/Amorphous core, Energy Efficiency Level 1, carrying Bureau of Indian Standard Certificate mark, in following preferred ratings as per detailed scope of work and technical specifications under: New 100 KVA (11/0.4 kV) Aluminium wound DTR (Replacing 100KVA old DTR),

Replacement of old Distribution Transformer Substation using new outdoor type, oil immersed, distribution transformer up to and including 2500 KVA as per IS1180 (Part-1): 2014 and its amendments 1, 2, 3 and 4, CRGO/Amorphous core, Energy Efficiency Level 1, carrying Bureau of Indian Standard Certificate mark, in following preferred ratings as per detailed scope of work and technical specifications under: New 160 KVA (11/0.4 kV) Aluminium wound DTR (Replacing 160 KVA old DTR),

Replacement of old Distribution Transformer Substation using new outdoor type, oil immersed, distribution transformer up to and including 2500 KVA as per IS1180 (Part-1): 2014 and its amendments 1, 2, 3 and 4, CRGO/Amorphous core, Energy Efficiency Level 1, carrying Bureau of Indian Standard Certificate mark, in following preferred ratings as per detailed scope of work and technical specifications under: New 200 KVA (11/0.4 kV) Aluminium wound DTR (Replacing 200 KVA old DTR),

Replacement of old Distribution Transformer Substation using new outdoor type, oil immersed, distribution transformer up to and including 2500 KVA as per IS1180 (Part-1): 2014 and its amendments 1, 2, 3 and 4, CRGO/Amorphous core, Energy Efficiency Level 1, carrying Bureau of Indian Standard Certificate mark, in following preferred ratings as per detailed scope of work and technical specifications under: New 250 KVA (11/0.4 kV) Aluminium wound DTR (Replacing 250 KVA old DTR),

Description of Work / Item(s)

Erection, Replacing , Testing and Commissioning of Old Distribution Transformers- Labour

Erection, testing & commissioning of new Distribution Transformer by reconnecting 11 kV, LT, earthing circuit providing suitable lugs, bi-metallic clamps including supporting structure etc as required as per technical specifications, approved drawings and scope of the work. Replaced material and DTR to be deposited at TCED store: New 100 KVA (11/0.4 kV) Aluminium wound DTR (Replacing 100KVA old DTR),

Erection, testing & commissioning of new Distribution Transformer by reconnecting 11 kV, LT, earthing circuit providing suitable lugs, bi-metallic clamps including supporting structure etc as required as per technical specifications, approved drawings and scope of the work. Replaced material and DTR to be deposited at TCED store: New 160 KVA (11/0.4 kV) Aluminium wound DTR (Replacing 160 KVA old DTR),

Erection, testing & commissioning of new Distribution Transformer by reconnecting 11 kV, LT, earthing circuit providing suitable lugs, bi-metallic clamps including supporting structure etc as required as per technical specifications, approved drawings and scope of the work. Replaced material and DTR to be deposited at TCED store: New 200 KVA (11/0.4 kV) Aluminium wound DTR (Replacing 200 KVA old DTR),

Erection, testing & commissioning of new Distribution Transformer by reconnecting 11 kV, LT, earthing circuit providing suitable lugs, bi-metallic clamps including supporting structure etc as required as per technical specifications, approved drawings and scope of the work. Replaced material and DTR to be deposited at TCED store: New 250 KVA (11/0.4 kV) Aluminium wound DTR (Replacing 250 KVA old DTR),

Description of Work / Item(s)

APFC Panel -Materials

Design, supply, installation, testing and commissioning of APFC panel 11kV, 60KVAR, at DT locations with 5 Nos. of Stage contactors as per technical specification, approved drawings and scope of work.