PERIODICAL SERVICES INCLUDING SMART PERIODICAL AND MISC REPAIR TO EXTERNAL WALLS OF MD ACCN IN KP QTRS AND AUL LINE UNDER AGE B-R-III AT YOL MIL STN

Amount

Demolition and breaking up upto 75/110mm bore drain pipes (SGSW/AC/RCC/PVC), set in CM , complete all as specified and directed.

Taking down steel water tubing 15 mm bore including all fitting and connections complete all as specified and directed.

Taking down steel water tubing 20 mm bore including all fitting and connections complete all as specified and directed.

Taking down steel water tubing 25/32m bore including all fitting and connections complete all as specified and directed.

Cutting holes into or through cement concrete slabs, chajjas, etc. reinforced or otherwise, Superficial Area not exc 100Sqcm, complete all as specified.

Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

Preparation of new steel surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Rolled sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc.conforming to Fe-410- W(Gde- E-250) quality-B complete all as specified and directed.

Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240, complete all as specified.

Repair to leakage/seepage in sunken portion of WC/Bath/Kitchen from outside area duly taking down brick/stone masonry or concrete surface upto the broken trap/bend/joint/Pipe of any descreption and rectifying the leakage from joint with cement sand mortar and replacement of CI/PVC trap/bend/joint/Pipe/EWC/IWC and make good the disturbed portion complete all as required and directed by Engr-in-Charge.

Taking down cement plaster/decayed concrete from RCC roof projections/upward parapet walls/down facia/soffits and fins of RCC chajjas/beams/columns/balconies etc. and also applying one coat of anti corrision paint to visible reinforcement if any. Supply and fixing by means of nailing wire netting of galvanised wire 1.40mm dia and mesh size 20mm and brushing neat cement slury with 3.00 Kg of cement/sqm including 20mm thick cement rendering in two layers of 10mm each using shot gun or pressure nozzle for grouting the surface well bonded with reinforcement (top/final layer shall be rendered after final setting of under layer) in CM 1:3 on concrete surfaces including scaffolding at a height upto 7.00 mtrs etc complete all as specified and directed.

Preparation of old steel surfaces of any description, over 10cm in width or girth,not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

Preparation of old wooden surfaces of any description, over 10cm in width or girth,not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

Exterior Painting work including complete removal of existing treatment till top surface of existing plaster and crack filling with crack seal upto 3mm where required and making good/smooth the surface with wall putty with silicon additives and sanding these surface for removal of loose particles and applying one coat of water proof primer on walls and chajjas with 10% dilution of water and applying two coats of 100% acrylic smooth emulsion exterior grade with silicon additives and anti-algal properties, complete all as specified.

Taking down old cement plaster of walls and perform waterproofing of exterior walls, including raking out joints,loose particles complete and applying two coats of acrylic polymer modified high performance coating . The treatment shall be done from ground level and upto suitable height as directed and icluding 15mm thick cement plaster in CM 1:4 well finished even and smooth complete all as sepcified and directed. Note : All treatment shall be done by OEM authorised applicator only.

Steel tubes, 32 mm bore, galvanised, "medium grade" with all fittings and fixtures and short lengths, for over flow pipe including necessary fixing washers, socket,nipple,union,elbow etc to existing water tank complete all as specified and directed.

G I tubing medium grade of 15 mm bore with all fittings and fixtures fixed to wall and ceiling or laid in floor/trenches complete all as specified and directed.

All as per item 17 above but fixing only

G I tubing medium grade of 20 mm bore with all fittings and fixtures fixed to wall and ceiling or laid in floor/trenches complete all as specified and directed.

All as per item 19 above but fixing only

PVC (SWR) 75mm bore (dia) soil, waste and ventilating pipe, singe socketed, in any length with Rubber Ring Joints fixed to walls, fittings, etc, complete all as directed and all as specified.

PVC (SWR) 110mm bore (dia) soil, waste and ventilating pipe, singe socketed, in any length with Rubber Ring Joints fixed to walls, fittings, etc, complete all as directed and all as specified.

PVC (SWR) 110mm bore (dia), Bends any type, with disminishing pieces or tapers and Jointing with Solvent Cement, complete all as specified and as directed.

PVC (SWR) 75mm bore (dia), Bends any type, with disminishing pieces or tapers and Jointing with Solvent Cement, complete all as specified and as directed.

Disconnecting existing tanks of capacity exceeding 250 Lires but but not exceeding 500 litres, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position including Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc, complete all as specified.

20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed.(Minimum weight-210gms) , fixed in repair complete all as specified.

32mm tank Nipple PTMT suitable for HDPE water tank complete all as specified and directed.

Deduct Credit Amount as per Schedule of credit as details given on Srl Page No 20 of tender doucments.

lashkar singh (BID ID -3090536)

M/S AMOLAK SINGH AND SONS (BID ID -3089186)

MM Constructions (BID ID -3090003)