Painting to hostel office Kitchen & other buildings in SV Arts college, Tirupati

Dismantling, clearing away and carefully stacking materials useful for re-use, through scraping of old plastered surface

Hire charges for access scaffolding upto 3.66m using casurina ballies, Bamboos wooden reapers, runners wood posts wall plates etc., for plastering to walls.

-do- In Second floor

Plastering in Cement mortar using best river sand from approved quarry including cost and conveyance of all materials, screening, curing, rounding of corners, incidental charges as directed during execution complying with standard specifications etc., complete for the following proportions.

-do- In CM (1:3) 12mm thick

-do- In CM (1:5) 20mm thick

Providing and applying wall putty of white cement or polymer or cement based putty of approved make with average 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, sand the surface, clean & wipe off loose dust, applying knifing paste filler by putty knife / muslin pad, air dry for 2-3 hrs. sand with 180 and 320 No., emery paper for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work, excluding scaffolding charges - for internal and external walls - For Old Work

Painting single coat for Internal walls - old with Acrylic Emulsion paint interior grade having VOC (Volatile Organic Compound) content less than 50 grams/liter of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work as per SS 911 for internal walls.

Painting Two coats for Internal walls - Old with Acrylic Emulsion paint interior grade having VOC (Volatile Organic Compound) content less than 50 grams/liter of approved brand and shade over priming coat with ready mixed Cement primer for interior grade-I (water thinnable) (Total Three coats) for old plastered surface after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work as per SS 911 for internal walls.

Painting single coat for External walls - Old with Acrylic Emulsion paint exterior grade with silicon additives having VOC (Volatile Organic Compound) content less than 50 grams/liter of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work as per SS 911 for external walls.

Painting Two coats for External walls - Old with Acrylic Exterior Emulsion paint exterior grade with silicon additives having VOC (Volatile Organic Compound) content less than 50 grams/liter of approved brand and shade over priming coat with ready mixed Cement primer for exterior grade-II (water thinnable) (Total Three coats) for Old plastered surface after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work as per SS 911 for external walls.

Painting with Ready mixed Synthetic Enamel paint in all shades Grade-I having VOC (Volatile Organic Compound) content less than 50 grams/liter approved colour and make including brushes to have an even shade including cost and conveyance of all materials as directed during execution complying with standard specifications etc., complete.

-do- Two coats for old Wood work / Old plastered surface

-do- Two coats for old Iron work

Polishing the Old wood work with best French Sprit polish of two or more coats of approved quality and make including brushes to have an even shade and including linseed oil, boiled, stopping cloth, cost and conveyance of all materials as directed during execution etc., complete.

Repairing and sealing of cracks on plaster/masonry walls

The following procedure is to be adopted for repairing and sealing of cracks on Plaster/masonry walls.

1) The surface at cracks is to be cleaned from all dirt, oil, grease, fungus, loose particles by using wire brush. 2) The “V” shaped grooves shall be cut along the locations of all visible cracks and the grooves shall be cleaned to remove all the loose particles, dust etc. 3) The “V” grooves shall be 6 x 6 mm or as directed by the Engineer in charge. 4) The grooves shall be sprinkled with clean water before applying the sealing material. 5) Then the “V” grooves shall be filled with non shrink, cementitious, crack sealer/ crackfil material/ paste with a putty blade. 6) The treated area is to be cured for sufficient time (24 hours) before applying plastering/ painting.

The following materials are to be used depending upon the manufacturer.

MAKE CRACKFIL MATERIAL/PASTE

Dr.FIXIT DR.FIXIT Crack-X

FOSROC Renderoc CS Crack Sealer Chemicals(Ind.)Pvt. Ltd.

Note: The rate does not include plastering or painting which is to be paid separately but includes cost of chemical used as filler material

Repair to damaged concrete (ceiling / Beams/ columns)

The following procedure is to be adopted to repair the damaged concrete on ceiling/ Beams/ columns.

1) Temporary and adequate support by properly designing, staging and shuttering consisting of steel/ wooden props from the floor is to be provided. 2)(a) The damaged/ loose/ spalled/ friable concrete is to be removed by wire brushing, Scraping etc., to expose rusted reinforcement. (b) If the existing reinforcement is not damaged in terms of its size, strength, bonding properties etc., then step (4) is to be followed. (c) If the existing reinforcement (mild or tor steel) is damaged, then the same is to be replaced with new bars similar to the existing bars and then step (4) is to be followed. 3) All loose scale and corrosion deposits on the reinforcement shall be removed by Wire brushing, scraping or other mechanical means. 4) Two coats of Anti corrosive coating for steel are to be applied to avoid future rusting. 5) The exposed surface is to be finished neatly, by cement mortar duly adding suitable Polymer modifier bonding agent. 6) Curing is to be done by using a water based concrete curing compound.

The following materials are to be used depending upon the manufacturer

MAKE ANTI-CORROSIVE AGENT

a) Dr.FIXIT DR.Fixit Rust remover

b)FOSROC Nitozinc Primer Chemicals(Ind.) Pvt. Ltd.

MAKE BONDING AGENT

b)FOSROC Concure WB Chemicals(Ind.) Pvt. Ltd.

NOTE: 1) The rate is excluding cost of scaffolding and plastering.

2) The rate does not include the cost of the new reinforcement replacing the existing reinforcement. If the new reinforcement is placed, the cost of the same is to be paid separately.

Artist painting to like God /Animal pictures / Sceneries over walls and MS Sheet with three coats back ground ( One coat primery & Two coats synthetic enamel paint) the rate including cost of labour charges / Artist remuneration / materials cost like ( Painting / brushes / scaffolding etc) complete as directed during execution.