CERTAIN MISC WORKS PERTAINING TO POP UNDER AGE B/R-I AT IMA DEHRADUN

Amount

Taking down cement plaster on brick or stone walling built in cement mortar including raking out joints hacking for key scrubbing down with water etc including removing debris out side IMA premises complete all as specified

M&L for Rendering 15mm thick plaster on fair faces of brick work or concrete surface in cement mortar 1:4 finished even and smooth without using extra cement and mixed with water proofing compound as per manufactures instructions, complete all as specified and directed. Note:- Water proofing compound shall be measured and paid separately.

M&L for Rendering 15mm thick plaster on other than fair faces of brick work or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed.

M&L, for Factory made Precast heavy duty RCC drain cover 80mm thick with using 10mm dia reinforcement TMT bar including MS hooks with two coats of antecorresive paint over primer all complete all as specified and directed.

M&L for heavy duty exterior tiles (Parking tiles) 30 cm X 30 cm X 10 mm thick, set , jointed and pointed in neat cement surry in floors with pigments complete all as specified and directed

M&L for preparation of old painted concrete, brick, stone or plaster surfaces including kerb stone surface of any description over 10 cm width and girth and applying one coat of synthetic enamel paint , complete all as directed.

M&L Preparation of old cement concrete interlocking paver block/chequered tile floor and similar flat concrete area on path, pedestal, hardstanding by brooming down or steel wire brushing, scrapping , removing grass roots in joints of paver block and cleaning all loose dirt & dust from the surface by fanning with air compressor and applying one coat of anti fungal apex paint of Asian paint or equivalent in berger, Nerolac paint as per original colour and pattern of tile, complete all as specified & directed.

M&L Preparation of old painted wooden surfaces of any description, over 10 cm in width or girth and applying one coat of synthetic enamel paint with approved shade complete all as specified and directed

M&L French polishing one or more coat on old polished wooden surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler surfaces complete all as specified & directed.

M&L Preparation of old painted steel surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint with approved shade, complete all as specified and directed.

Complete removing of existing treatment from wall or ceilling surfaces by scrapping with mechanical sander/grinder upto entire saticsfication of Engr-in-Chage, all as specified and directed. Note : Work will be carried out upto a height of triple storied buildings.

M&L for Preparation of newly plastered or scrapped surfaces of wall or ceiling by making free from dampness, oil or any loosely held particles, filling cracks if any with crack seal and applying a coat of Dampstop Advanced of Berger or equivalenet of Sika/ Asian Paint/ Fosroc on saturated dry surface of wall as per manufacturer instruction complete all as specified and directed. Note : Work will be carried out upto a height of triple storied buildings.

M&L for Preparation of newly plastered or scrapped surfaces of wall or ceiling and applying 02mm thick damp proof wall care putty in two coats as per manufacturer instruction complete all as specified and directed. Note : 1. Work will be carried out upto a height of triple storied buildings. 2. Work shall be carried out with mechanical means.

M&L for Preparation of puttyied surfaces of wall or ceiling and applying two coats of oil emulsion distemper over one coat of primer, complete all as specified and directed. Note : Work will be carried out upto a height of triple storied buildings.

M&L for Preparation of newly plastered or puttied surfaces of wall and ceiling and applying two coats of weather Exterior Emulsion Paint over one coat of exterior primer complete all as specified and directed. Note : Work will be carried out upto a height of triple storied buildings. Make:- Asian paint, Berger paint, Nerolac paint.

M&L, Preparation of old plastered surfaces of walls by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of oil emulsion distemper on walls complete all as specified and directed. Note : Work will be carried out upto a height of triple storied buildings.

M&L for Preparation of old plastered surfaces of ceilings by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of oil emulsion distemper on ceiling, complete all as specified and directed. Note : Work will be carried out upto a height of triple storied buildings. Make:-

M&L for Preparation of old treated plastered surfaces of wall and applying one coat of weather exterior emulsion paint (Apex paint of Asian Paint / Weather proof of berger/ Nerolac paint) on walls complete all as directed. Note : Work will be carried out upto a height of triple storied buildings.

M&L for preparation of old painted road surfaces by removing dust & dirt, cleaning the suface with brooms, fanning etc and applying thermoplastic paint of minimum 2.50 mm thick single coat layer on existing marking as in lines, dashes, arrows etc for road marking with using 'HOT MARK' thermoplastic paint (Hot application), White/Yellow by indigenous modern propelled road marking machine as directed including all ingredients such as blinder, glass beads, titanium dioxide, calcium carbonate inter fillers, Thermoplastic required for glass beads shall be as per table No 8004 of MORTH specification including spraying of glass beads etc all as per manufacturer instruction complete all as specified and directed.

S&F, in repairs, Solar road stud having 3 LED's of colours red/yellow/blue/green tough pressure dia casted aluminium alloy of size 125x125mm f height 20mm with fixing with epcxy, LED's solar cells battery & light sensor well protected in side under tough unbreakable poly carbonate transparent sheet roof system workable for 3-4 (nights) after full charge in 8-10hours including removal of old unserviceable stud, complete all as directed. Make:- Shakti, M3M

S&F, in repairs, cat eye's dual directional reflective of tough poly carbonate of retro reflective glass beads of colour white/red/yellow side provided with including removal of old unserviceable stud, complete all as directed. Make:- Shakti, 3M,Tata BP Solar,Dark Eye

S&F, in repairs, high intensity grade shedding retro reflective delinator post 75 mm outer dia, heavy duty steel pipe 1.2 m long head cap by hydraulic machine design and hold fast welded on delineator post bottom with one one coat of red oxide paint and two coats of stove enameled paint by heat process and three Nos reflective bands of white, red & yellow colour and covered by 14 gauge net grill and welded complete all as specified embedded in ground in 30x30x40cm deep pit (including excavation and removal of soil) filled with PCC 1:2:4 type B-1(using 20 mm graded crushed stone aggregate) and up to 30 cm high above ground level including necessary form work, two coats of cement base paint on concrete base, removal of old unserviceable delinator complete all as spd and directed. Make:- Shakti, 3M,Tata BP Solar,Dark Eye

Demolition of brick work or stone/boulder masonry built in CM on cement lime mortor and removing rubbbish of out side IMA premises.

M&L for brick work with sub class ‘B’ brick (old size) straight or curved on plan exc 6m mean radis built in cement mortar 1:6 complete all as specified.

M&L for Brick work with sub class ‘B’ bricks (old size), straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed.

Demolition of cement concrete un reinforced in ground floor and paving exc 15cm thick (below or above ground level) complete all as specified and directed.

M&L for PCC 1:4:8 type D-2, (using 40 mm graded crushed stone aggregate) as in foundation, filling, mass concrete and sub base of floor complete all as specified and directed

M&L for PCC 1:2:4 Type B-0 {using 12.5mm graded crushed stone aggregate} as in coping/ benching including weathering, slightly rounded or chamfered angles and throating etc including necessary form work complete all as specified and directed.

M&L for PCC 1:2:4 type B-2 (using 40mm graded crushed stone aggregate) as in surface channels and drains including demolition and taking out of existing cement concrete of any description complete all as specified and directed.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc. complete all as specified and directed.

M&L for Precast RCC 1:2:4 Type B-1( using 20 mm graded crushed stone aggregate} as in cover slab, set and jointed in cement mortar 1:4 incl demolition of existing old RCC slabs of any description complete all as specified and directed. (Note: Reinforcement shall be measured and paid separately under respective items of this BOQ)

S&F Mild steel framed work such as grills, grating etc with end of bars shouldered and/ or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing, and similar work complete all as specified and directed

Preparation of new plastered surfaces of wall and applying two coats of snowcem (cement base paint) complete all as directed.

Prepration of new surfaces of wall / ceiling and applying two coats of oil bound emulsion distemper over a coat of primer complete all as specified and directed.

M&L for RCC 1:1½:3 Nominal mix (using 20mm graded crushed stone aggregate) as in slab supported on walls beams and columns in floor, roof, landing and in shelves and the like including demolition of existing R.C.C complete all as specified and directed.

S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Use and waste of form work to edges of concrete flat slab and shelves, not exceeding 20cm Thick for fair finish surface complete all as specified and directed.

Use and waste of form work to soffits of suspended slab such as roof slab, floor slab, landing and similar work not exceeding 200mm thick for fair finish surface complete all as specified and directed

M&L for 25mm thick PCC 1:2:4 type B-1 (using 20mm graded agg) used as sub floor finish the surface to receive to tiles including demolition of existing old cement concrete floors etc complete all as directed.

M&L for Non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exceeding 0.6 Sqm but not exceeding 0.11 Sqm, laid in floors etc, set and jointed in neat cement slurry and pointed in white or coloured tile grout to match the shade of tiles with and including laying of 15 mm thick screed bed or bedding layer in cement mortar 1:6 complete including dismantling of existing floor tiling including cement mortar bedding and removing rubbish off the premises complete all as directed.

M&L for Glazed ceramic coloured tiles of size 450x300 x 7mm , as on vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in tile grout to match laid over and including 10mm thick rendring in cement mortar 1:4 finished rough surface to receive tiles including dismantling of existing wall tiling including cement mortar bedding and removing rubbish off the premises complete all as directed.

M&L for 300x300x25mm thick (M-35) glossy finish polished red color Chequered cement concrete tile of any pattern as decided by Engr-in-charge as in floors/pavings laid over 20 mm thick screed bed in cement mortar 1:6 laid and jointed with white cement slurry mixed with pigment to match the shade of tile complete including dismantling of existing tiles with screed bed of any description and in any position complete all as specified and directed. Make:- Tulip infrastructure Saharanpur, Crystal tiles, Jain tiles Haldwani.

M&L for Rubberised precast coloured concrete Interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 grade complete with & including 25mm thick sand cushioning layer including dismantling of existing damaged flooring etc complete, all as specified and directed. Make:- Tulip infrastructure Saharanpur, Crystal tiles, Jain tiles Haldwani.

M&L forRubberised precast coloured concrete Interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 grade complete with & including 25mm thick sand cushioning layer except tiles complete, all as specified and directed. Make:- Tulip infrastructure Saharanpur, Crystal tiles, Jain tiles Haldwani.

S&F in repairs rotational moulded polyethylene water storage tanks (cylindrical vertical top) hoisted and fixed in position complete 500 litre capacity. Make:- Sheetal, Vector, Syntax

M&L for 100 mm thick PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in floor/hard standings and making impressions with spike rolling or expanded metal whilst the concrete is green, finishing exposed edges fair or rounding or chamfering of exposed edges also filling in uneven surfaces to make it level including making joints 12mm wide to the full depth of PCC at panel size n, exc 2.0mx 2.0m and filling the same with sealing compound grade 'A' including necessary formwork including demolition of existing old cement concrete floor etc complete all as specified and directed.

M&L for 40mm thick PCC type B1 1:2:4 (using 20mm graded crushed stone aggregate) as in floors and finishing the concrete even and smooth using extra cement including demolition of existing old cement concrete floors etc complete all as directed.

Preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed

Sharda Enterprises (BID ID -3154127)

Amit Traders (BID ID -3153685)

ACE BUILDERS AND CONTRACTORS (BID ID -3153852)