GENERAL-RM 2025-26 / RC 2 Phase 1/ Zone 1 / Running Contract Work under Kottarakkara Roads Section-19 road stretches having total length of 66.97 km-General Civil Work

Amount

Appendix A- Reactive Maintenance (Initial Rectification)

OD250447/2024-2025:Filling up potholes with bituminous ready mix compound (25kg bag ) and compacting by ramming to get a compact surface including cost of materials. laying charges, transportation to site etc complete .( rate is arrived for a bag of 25kg)

55.8.a:Filling up pot holes (cut and formed to regular shapes and all loose and defective materials removed) after supplying a prime coat of hot bitumen using 36mm departmental broken stone and compacting with power roller to get a compact surface.

OD250462/2024-2025:Mix Seal Surfacing -Providing, laying and rolling of close-graded premix surfacing of 20 mm thickness composed of 13.2 mm to 0.9 mm aggregates using Bitumen VG-30 to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 kN static roller and finishing to required level and grades as per Technical Specification Clause 509 of MORD.

55.4:Supplying and stacking 36mm size hard broken stone in standard heaps for measurement.

5.2.b:Providing and applying tack coat with bitumen emulsion (RS) using emulsion pressure distributor at the rate of 0.25 - 0.30 kg per sqm on the prepared Granular Surface cleaned with mechanical broom.

Appendix B- premonsoon works

2.3.2.A:Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness In area of light jungle - By Mechanical Means

OD250441/2024-2025:Skilled labour engaged for cutting trees and branches

55.15:Refurbishment of existing signboardsRefurbishment of existing signboards of all size except gantry mounted ones to their original reflectivity & position by removing obstructions like overgrowth vegitation etc ,if any,washing the signboards with water & soap solution to remove all dirt, oil etc. , correcting any dislocations including minor repairs, replacement of lost nut and bolts etc complete.

OD250443/2024-2025:Engaging mazdoor for lowering side berms , clearing side berms, clearing side drains , removing silt from cuverts,cutting earthern drains, diverting blocked water , removing the branches of trees leaned towards the road threatening pedestrians and traffic ,removal of fallen trees or branches on the road clearing traffic blockage stack the wood at suitable place and various work as directed by engineer in charge etc.

OD250440/2024-2025:Engaging Hydraulic Excavator of 1cum bucket for various works as directed by the officer in charge

OD250442/2024-2025::Engaging tipper for conveying cut down branches of trees , silt and debris collected from drains

Appendix D : Proactive / Preventive Maintenance

3.6:Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m

4.12:Providing, laying, spreading and compacting graded stone aggregate to Wet Mix Macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.

12.4:Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days.

12.8.B:Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications PCC Grade M20 (Without formwork)

10.3:Maintenance of Earth Shoulder (stripping excess soil) from the shoulder surface to achieve the approved level and compacting with plate compactor

12.40:Supply, Fitting and Placing un- coated HYSD bar Reinforcement in Foundation complete as per Drawing and Technical Specifications

12.8.B.1:Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications PCC Grade M20

55.25:Lifting, conveying and fixing the newly casted RCC covering slabs of any thickness on top of drain in position including all labour charges and miscellaneous expenses etc complete

5.1.a:Providing and applying primer coat with bitumen emulsion ( SS) on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 - 1.0 kg/sqm using mechanical means.

Appendix D : Emergency works

10.5.1b:Removal of all failed material, trimming of completed excavation to provide firm vertical faces, cleaning of surface, painting of tack coat on the sides and base of excavation as per clause 503, back filling the pot holes with hot bituminous material as per clause 504, compacting trimming and finishing the surface to from a smooth continuous surface, all as per clause 3004. 2 Filling Port holes and Patch Repairs with Bituminous concrete For grading II- 13 mm (Nominal size) Material

OD250444/2024-2025:Engaging labour with passenger car not less than 1000 cc for Conducting and Reporting Routine Inspection upto 20 Km per day for the entire length of the project Road frequency of 7 days throughout the agreement period of the Running Contract as directed by the departmental officers .

OD250446/2024-2025:Providing and fixing of DLP board for Running Contract work with non reflectorised Vinyl Sign with 1 years warranty manufactured Vinyil Printing sheeting fixed over aluminium sheeting, 2 mm thick/ aluminium composit material sheeting 4 mm thick with area not exceeding .9 m2 with suitable back supporting frame of MS angle 40 x 40 x 6 and supported on GI pipe pole 50mm NB confirming to IS 1239 firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete min size 45 cm x 45 cm x 60 cm, 60 cm below ground level including painting all exposed surface with 2 coats of epoxy painting over epoxy primer as per approved drawing and clause 801 including lettering symbols etc.

OD250445/2024-2025:Providing and fixing Convex mirror 100mm diameter supported on GI pipe pole 65mm diameter NB confirming to IS 1239 n firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete min size 45cm x 45cm x 60 cm below ground level including painting all exposed surface with 2 coats of epoxy painting over epoxy primer

55.10.1:Providing and erecting retro-reflectorised Object Hazard Marker 300mm x 900mm Providing and erecting retro-reflectorised Object Hazard Marker sign with 07 years warranty, manufactured as per IRC 67 USING Type IV ASTM D 4956-09 micro prismatic retro reflective sheeting fixed over aluminium sheetig, 2 mm thick / aluminium composit material sheeting 4 mm thick with suitable back support frame and supported on a mild steel angle iron post 75mmx75mmx6mm, firmly fixed 30cm above ground level by means of properly designed foundation with M 15 grade cement concrete 30cmx30x45cm, 45cm below ground level including painting all non-reflective faces with epoxy paint 2 coats over epoxy primer as per approved drawing and clause 801.300 mm x 900 mm

8.13:Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads on Bituminous Surface @ 250 gms per sqm area, the thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform, and free from streaks and holes.

AANVI CONSTRUCTIONS (BID ID -2274056)

SHIJU.C.RAJU (BID ID -2275006)

SANTHOSH M K (BID ID -2274730)

ANIMON G K (BID ID -2275040)

Y.SHAJAHAN (BID ID -2276633)

Bidder Name

SANTHOSH M K

Y.SHAJAHAN

SHIJU.C.RAJU

ANIMON G K

AANVI CONSTRUCTIONS

RAJANDRA PRASAD K