Removal of Black Spot Haladia Chhaka Areda of NH 316 from Km. 12.9 to 13.4 and Nuanai Chhacka of NH 316 located at 67th Km. from Puri.

Amount

Clearing and grubbing road land as per clause no. 201 and section 900 of specification for road and Bridge works (5th Revision) of MoRT&H including cost of all labour, T&P, cess etc. complete and as per direction of Engineer in charge.

Earth work in excavation in ordinary soil as per clause no. 301 and section 900 of specification for road and Bridge works (5th Revision) of MoRT&H including cost of all labour, T&P, cess etc. complete and as per direction of Engineer in charge.

Construction of sub-grade and earthen shoulder with approved materials from approved borrow pits by mechanical transportation including all leads, lifts, watering, rolling, cost of all materials, labour, T&P, royalty, cess etc. and complete as per clause no. 305, table 300 - 2 and section 900 of specification for road and Bridge works (5th Revision) of MoRT&H and as per direction of Engineer in charge.

Providing and laying complacted coarse graded sub - base using grading - I material of (table 400 - 2) as per clause no. 401 and section 900 of specification for road and Bridge works (5th Revision) of MoRT&H including cost of all materials, labour, T&P, royalty, cess etc. complete and as per direction of Engineer in charge.

Providing 250mm thick layer of Wet Mix Macadam in compacted layers as per clause no. 406 and section 900 of specification for road and Bridge works (5th Revision) of MoRT&H including cost of all materials, labour, T&P, royalty, cess etc. complete and as per direction of Engineer in charge.

Providing and applying Primer Coat with bitumen emulsion on prepared surface of granular sub-base as per clause no. 502 and section 900 of specification for road and Bridge works (5th Revision) of MoRT&H including cost of all materials, labour, T&P, cess etc. complete and as per direction of Engineer in charge.

Providing and applying Tack coat using bitumen emulsion (Medium setting) on prepared surface as per clause no 503 and section 900 of specification for road and Bridge works (5th Revision) of MoRT&H including cost of all materials, labour, T&P, cess etc. complete and as per direction of Engineer in charge.

Providing and laying 80mm thick compacted Dense graded bituminous macadam grading-II using 30/40 (VG - 40) grade of bitumen and crusher broken granite aggregates as per clause no. 501, 505 and section 900 of specification for road and Bridge works (5th Revision) of MoRT&H including cost of all materials, labour, T&P, royalty, cess etc. complete and as per direction of Engineer in charge.

Providing and laying 40mm thick compacted bituminous concrete grading-II using 30/40 (VG - 40) grade of bitumen and crusher broken granite aggregates as per clause no. 501, 507 and section 900 of specification for road and Bridge works (5th Revision) of MoRT&H including cost of all materials, labour, T&P, royalty, cess etc. complete and as per direction of Engineer in charge.

(A) Rumble strip

(B) Rumble strip

Proving Road marking with Hot applied retroreflecting thermoplastic compound as per clause no 803 of specification for road and Bridge works (5th Revision) of MoRT&H including cost of all materials, labour, T&P, cess etc. complete and as per direction of Engineer in charge.

(A) Rumble strip

(B) Rumble strip

Providing retro-reflectorised cautionary, mandatory and informatory sign boards as per IRC.67 made of high intensity grade sheeting as per clause no 801 of specification for road and Bridge works (5th Revision) of MoRT&H, fixed over aluminium sheeting 1.5mm thick supported on a mild steel angle iron post 75mm x 75mm x 6mm firmly fixed to the ground by means of properly design foundation with M-15 grade cement concrete 45cm x 45cm x 60cm, 60cm below ground level including cost of all materials, labour, T&P, royalty, cess etc. complete and as per direction of Engineer in charge.

(A) 90cm Equilaterial Triangular size

(B) 90cm Equilaterial Triangular size

(A) 60 cm Circular size

(B) 60 cm Circular size

(A) 90 cm Octagonal size

(B) 90 cm Octagonal size

(B) 60 x 80 cm rectangular size

(B) Chevron

Providing and erecting direction and place identification retro-reflectorised sign as per IRC:67 made of high intensity grade sheeting as per clause 801.3 of specifications for Road and Bridge works (5th revision) of MoRT&H, fixed over aluminium sheeting, 2mm thick with area exceeding 0.9sqm supported on a mild steel angle iron post 75mm x 75mm x 6mm, 2 nos, firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 45cm x 45cm x 60cm, 60cm below ground level including cost of all materials, labour, T&P, royalty, cess etc. complete and as per the direction of Engineer-in-Charge.

Providing, supplying, fitting and fixing of reinforced cement concrete M15 grade hectometer stone of standard design as per IRC:8-1980. Fixing in position including painting and printing etc.

Providing, supplying, fitting of solar blinkers (Red Colour Signal) of Mono Crystaline type of 18 vol/900 MA Plumbic Acid type Battery with 5mm LED size of 192 Nos of light required and Luminous intensity with 15 watt solar Cell and fitting 3" dia G.I. Pipe.

Providing and erecting street light mounted on a steel circular hollow pole of standard specification for street lighting, 9m high spaced 40m apart, 1.8m overlaying on both side if fixed in the median and on one side if fixed on the foot path, fitted with sodium vapur lamp and fixed firmly in concrete foundation.

Providing and fixing of road stud 100x100 mm, die-cast in aluminum, resistant to corrosive effect of salt and grit, fitted with lense reflectors, installed in concrete or asphaltic surface by drilling hole 30mm upto a depth of 60mm and bedded in a suitable bituminous grout or epoxy mortar, all as per BS 873 part 4:1973

Om Maa Construction