PROVISION OF DEFICIENT SANITARY ANNEXE AND HARD STANDING WITH INTERLOCKING TILES AT GATE NO 2 OF INS VISWAKARMA VISAKHAPATNAM

Amount

Schedule 'A' Part -I ( B/R Schedule)

Excavation in trenches, n exc1.5 m wide and not exc 1.5 m in depth for foundation etc and getting out loose /soft soil all as specified and directed.

PCC 1:4:8 type D2 in foundation, mass concrete etc

RCC M-30 in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete

RCC M-30 in columns complete all as specified and as specified.

RCC M-30 in roof beam complete all as specified and as specified.

RCC M-30 in roof slab complete all as specified and as specified.

Form work to sides of concrete foundations, footings, column upto Plinth beam,sides and soffits of plinth beams and similar work for rough finished surface of concrete.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished surfaces of concrete.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; rough finished surfaces of concrete.

M&L for mild steel TMT bars 10mm dia and over cut to length bend to shape including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia.

All as per item No.10 above but 5 to 10 mm dia including 10mm dia in stirrups, spaces and binders

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm.

Removing excavated material exc. 250m but n exc. 500m and depositing where directed at a level n exc. 1.5 m above the starting point in soil

S & F Solid pvc Door Frame of size 50mmx47mm made out of 5mm plain colour PVC Sheet reinforced with MS Square etc.

Supplying and fixing in frame at site, factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, as per specification & drawing. Make: RAJASHRI PLASTIWOOD or equivalent make as approved by GE.

S&F Powder coating anodised aluminium frame for doors, windows, ventilatiors with one or more rebtes including joining cleat for fixing etc. complete all as specified. (Minimum thickness of powder coating 50 micron).

S&F for powder coating of any colour anodised alluminium window and door shutters, fixed type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No), hinges type B-21 100mm long (2Nos) suitable handle (1 No) complete all as specified. (Minimum thickness of powder coating 50 micron).

S & F 4 mm thick Sheet glass, ordinary quality and glazing with wooden beads in squares not exceeding 0.5 Sqm in each pane

S & F 3 mm thick Figured glass, pin headed type and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane.

S & F 100 mm long extruded aluminium alloy with galvanised mild steel Butt hinges and fixed type B-21.

S & F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised.

S & F 100 mm long Aluminium, anodised, barrel tower bolts of extruded section

S & F in repair Cast iron body door closer hydraulically regulated, designation No. 3 universal type , suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg

S&F 10 Ltr capacity PVC valveless symphonic action type flushing cistern, low level with inlet , ball valve, float all as specified including necessary flush pipe as directed.

S & F Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) ( excluding flushing cistern and flush pipe ) fixed in repairs

Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device

M & L in repair for 15 mm dia bore angle tap .

M & L in repair for 15 mm dia bore 2 in 1 tap .

PVC connection 15 mm bore 450 mm long

S&F in repairs grating round 100 mm size of PTMT (min weight 25 grms).

S&F Aluminium anodised Tubular towel rail, 20mm dia, D type, 60cm long between flanges.

S & F 15 mm bore chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule.

S & F in 15 mm bore Fancy type pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed.

S & F in Vitreous China Ware Wash hand basin white, flat back, size 550 x 400 mm size including cutting for and pinning ends of brackets or erecting stand.

S&F in Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

M&L in repair 15mm dia Stop valves, cast copper alloy,screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed.

Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 of dia 16mm fittings on walls/ceiling or laying in floors complete all as specified.

Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 of dia 20 mm fittings on walls/ceiling or laying in floors complete all as specified.

M&L for cement concrete bed to drain pipe 150mm bore (Internal) in cement concrete (1:3:6) type C-2 with using 40mm graded crushed stone aggregate including packing under and haunching against the sides of pipes after they are laid and tested all complete all as specified and directed.

M&L for cement concrete bed to drain pipe 100mm bore (Internal) in cement concrete (1:3:6) type C-2 with using 40mm graded crushed stone aggregate including packing under and haunching against the sides of pipes after they are laid and tested all complete all as specified and directed.

M&L for 100mm dia (internal) salt glazed stone ware drain pipes (Grade A) ISI Marked as in sewage lines laid in trenches and jointed complete all as specified and directed.

M&L for 150mm dia (internal) salt glazed stone ware drain pipes (Grade A) ISI Marked as in sewage lines laid in trenches and jointed complete all as specified and directed.

M&L for Vitreous China urinals, bowl type (back or corner wall type),complete including providing and fixing plugs, bedding urinal against wall in cement mortar1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automaticflushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) .

S&F in repair1000 Ltrs. Capacity rotational moulded polyethylene water storage tanks (cylinder vertical with class top) hoisted and fixed in position all as specified

S&F in repairs 25mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20mm-210gms./ 25mm-455gms/ 40mm- 690 gms) complete all as specified and directed.

M&L for 75 mm PVC(SWR) pipes single socketed in any length with rubber ring joints fixed to walls .

M&L for 110mm PVC(SWR) pipes single socketed in any length with rubber ring joints fixed to walls .

S/F 75 PVC(SWR) branch piece,single (single Y) equal or unequal with access door

S/F 110PVC(SWR) branch piece,single (single Y) equal or unequal with access door

S & F 75 mm dia.,PVC Bends (any Radius) with access door

S & F 110 mm dia., PVC Bends (any Radius) with access door

S & F of 110 mm bore PVC (SWR) vent cowl complete all as specified and directed

M&L Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match oloured including Screed bed or bedding layer of cement mortar 1:6, 15 mm thick for laying floor finishes.

Glazed ceramic coloured tiles in vertical surfaces 450x 350x 7 mm thick set and jointed in neat cement slurry & painted in white or colour cement to match incl sreed bed 10 mm thick in CM 1:4 .

Preparing Roof surfaceby picking, sweeping clean and washing down with water to remove dust, etc and applying roof treatment with the following specification:- (a) Applying cement slurry over concrete surfaces @ 3 kg/sqm.(b) M&L 25 mm thick cement concrete PCC Type B0 1:2:4 using 12.5 mm graded aggregate on roof slab (c) Rendring 15mm thick in cement mortar (1:4) mixed with water proffing compound as per manufactures instruction on cleaned concrete surfaces of roof and finishing the surfaces fair and even including curing the plastered surfaces for 7 days by ponding of water over the roof, (leveling course).(d) Applying evenly one coat of cold bituminous primer conforming to [email protected] liter per square metre on the cleaned plastered surfaces (e) Applying evenly one coat of blown hot bitumen of grade 85/25@ 1.20 Kg per square metre on primed surfaces.(f) Applying a layer of APP based polymeric membrane, 3mm thick (minimum)Weighing 3.50 Kg per square metre reinforces) with polyster non woven fabric wighing not less than 160 gms per square metre by torch application. The overlap shall be not less than 100mm on transverese direction and 75 mm on longitudinal direction and sealing overlaps.(g) Applying evenly one coat of Aluminium paint @ 0.10 litre per square metre over the APP based polymeric membrane at 5th floor complete all as specified and directed

M&L for Pre-cast cement concrete block masonry type C-1 (1:3:6) 20mm graded stone aggregate with solid blocks, exc. 10cm in width and setting in mortar1:6 complete bricks straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as specified.

M&L Providing precast cement concrete solid building blocks type B1(1:2:4 20mm graded aggregate 10cm thick (with plain or interlocking joints as directed) setting in mortar, complete, in wall

M&L for Providing precast ce- ment concrete type B1(1:2:4 20mm graded aggregate as in slab ,landing,etc complete all as specified and as directed.

M&L for 20 mm thick Granite work (table rubbed and polished) in decorative shelves, steps , pillars ,jambs, coocking plateform etc with chemfering of edge and in CM 1:4 including pointing in white cement with pigment to match with shade of granite including grinding,polishing complete all as specified and as directed.

M&L, rendering 15 mm thick in cement mortar 1:4 on other than fair face of brick or surface finished even and smooth without using extra cement .

M&L, rendering 10 mm thick in cement mortar 1:6 on other than fair face of brick or surface finished even and smooth without using extra cement .

M&L, rendering 5 mm thick in cement mortar 1:3 on concrete surface of ceiling finished even and smooth without using extra cement .

M&L for applying two coats 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 Lit/10 Sqm over newly plastered by auto roller upto 4th floor surfaces incl preparation of surfaces.

M&L for Preperation of new plastered surface of ceiling applying three coat of white wash.

S&F in repairs 19mm prelaminated particle board, interior grade, prelaminated one side with decorative choice laminations & other side balancing white lamination, fixed with screws to timber to timber frame work

S & F Continuous (Piano) hinges, mild steel, bright finished or electro galvanized, width of flaps (When open) 30 mm in repairs.

Surface dressing not exceeding 30cm deep and averaging 15cm and getting out in soft/loose soil as specified and as directed.

M&L hardcore of guage n.exc 63 mm, deposited, spread and levelled in layers n.exc 15 cm thick, watered and rammed to a true surface

M&L for providing 100 mm thick PCC (1:4:8) type D2 using 40 mm graded stone aggregate as in sub base,sub floor,paving where it is directed.

M&L for providing 75 mm thick PCC (1:2:4) type B2 using 40 mm graded stone aggregate as in sub base,sub floor,paving where it is directed.

Removal of excavated soil exec 50 mt and n exc 250m and deposition where directed at a level n exc 1.5m above the starting point.

M&L for Precast Plain cement concrete blocks (1:3:6) type C1 (20mm graded stone aggregate) as in bond stones set in cement mortar (1:6) complete,all as specified and as directed.

M & L for rendering to brick / concrete surfaces, 15 mm thick in Cement Mortar 1:4, finishing the top surface even and fair without using extra cement complete all as specified and as directed.

M&L for Preparing newly Plastered surfaces of wall and applying three coats of white wash, complete all as specified and directed .

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade with grey cement and pigment complete all as specified and directed.

S & F Mild steel Angles, bars, flats etc., as in supports for drain cover, stiffening of fencing post struts , wall ties, hold fasts, clamps and similar small articles confirming toFe 290 Gde-E-165

M&l Painting two coats of synthetic enamel paint over a coat of red oxide primer to new steel Surfaces of any description, not otherwise described, over 10cm width or girth.

Schedule 'A' Part -II ( E/M Schedule)

M&L for point wiring with 1.5sqmm PVC insulated unsheathed multistranded copper cable of FRLS grade with one run of 1.5 sqmm PVC insulated copper cable as earth continuity drawn in and inciluding concealed/semi concealed PVC conduit not less than 20mm dia including for mounting switches/Sockets, accessories such as spacers, saddles, junction boxes, metal box & cover plate of switch board for one light / fan point / Bell point / 5 Amps Socket same board controlled by one switch complete Note- The PVC Conduit is to be Concealed in wall through cutting,Chassing,Pining in making good surfacing where required and poining in cement mortar and making good for same unit rates are inculded for same

All same as per item No.1 above but for 5A socket point on independent board.

All same as per item No.1 above but for 15/16Amp switch socket out let, independent with 4.0sqmm copper cable of PVC insulated, unsheathed, multi stranded and 4.0 Sqmm for earth continuity conductor, complete all as specified

S& F switch modular one way 6 Amps,1 module 230V complete all as specified and directed.

M&L for modular switch 1way 16 Amps, 1 module 230V of 1 module complete all as specified and directed.

M&L for modular socket outlet 3 pin, 6 Amp 2module 230V complete all as specified and directed.

M&L for modular socket outlet 3 pin, 15/16 Amp 2module 230V complete all as specified and directed.

Supply and fixing ceiling rose surface bake lite 65 x 30 mm with 3 terminals complete all as specified and directed by Engr-in-charge.

S & F Surface & wall mounted Energy efficient LED Tube Light Fitting, of not less than 20 W (2000 Lumens) output, 5700 K of cool /warm white, with extruded aluminium / CRCA housing and robust construction with necessary acrylic diffuser & integrated electronic driver, all accessories internally prewired and connecting up with twin core PVC insulated, sheathed flexible copper conductor cable of size 1.5 Sq.mm complete all as specified and as directed.

S & F in repairs Surface & wall mounted Energy efficient LED Tube Light Fitting, of not less than 10 W (900 Lumens) output, 5700 K of cool white, with extruded aluminium / CRCA housing and robust construction with necessary acrylic diffuser & integrated electronic driver, all accessories internally prewired and connecting up with twin core PVC insulated, sheathed flexible copper conductor cable of size 1.5 Sq.mm complete all as specified and as directed.

S&F LED profile lighting consisting of aluminium extruded back strip casing ,LED / neon strip , PVC diffuser and led driver 12/24 V concealed in wall of cool white /warm white controlled by switch with all accessories complete all as specified and as directed by the Engineer-in-Charge.

S & F Security light LED type of 35 W Pressure die cast aluminium housing IP 66 protection with all accessories internally prewired and including connecting up with twin core twisted copper conductor cable of suitable size including bracket made of 40mm dia GI light grade pipe of 1.2m long bent to shape fixed with suitable MS clamps, bolts, nuts and washers duly painted after taking down old unserviceable light complete all as specified and as directed by the Engineer-in-Charge.

S & F LED post-top lantern 20 W (2000 Lumens) output, 5700 K of cool /warm white, with extruded aluminium / CRCA housing and robust construction with necessary acrylic diffuser & integrated electronic driver, all accessories internally prewired and connecting up with twin core PVC insulated, sheathed flexible copper conductor cable of size 1.5 Sq.mm complete all as specified and as directed.

S & F LED bollard light 10 W (2000 Lumens) output, 5700 K of cool /warm white, with extruded aluminium / CRCA housing and robust construction with necessary acrylic diffuser & integrated electronic driver, all accessories internally prewired and connecting up with twin core PVC insulated, sheathed flexible copper conductor cable of size 1.5 Sq.mm complete all as specified and as directed.

S&F MCB SP 6 to 32 Amps 240 Volts,10KA 'B' curve complete all as specified

S&F MCB SPN 40 Amps 240 Volts ,10KA 'B' curve complete all as specified

S&F MCB RCCB double pole 40 Amps 240 Volts ,10KA 'B' curve complete all as specified

S&F MCB DB 12 way SPN with 200 A rated bus bar, 240 Volts, Double door complete all as specified and directed by Engg-in-Charge

M&L for sub main wiring with two run of 1.5 Sq. mm PVC un-sheathed, copper conductor cable, 1100 Volt, and one run of copper earth wire 1.5 Sq mm drawn through PVC concealed conduit/surface of 25 mm dia, including taking down unsv sub main wiring of any type, complete all as specified. Note: Copper conductor 2 run and one run of copper earth wire along with PVC concealed conduict shall be measured as one length & Cutting of chases/walls and making good the disturbed surface are included in the rate.

Supply lay and testing of cable XLPE insulated ,screened PVC bedded armoured electric powercable (heavy duty 1100volt grade with stranded aluminium conductor of size 10 sqmm 4 core

Supply lay and testing of cable XLPE insulated ,screened PVC bedded armoured electric powercable (heavy duty 1100volt grade with stranded aluminium conductor of size 6 sqmm 2 core

Excavation in trenches not exc.1.5m wide and not exceeding 1.5m in depth and getting out in hard/dense soil for laying of cable complete all as specified.

Material and labour for natural river sand as cushioning of cables, including spreading and punning down complete all as specified and directed by Engineer in charge. Note : punned thickness shall be measured for payment purpose

Supply and laying in trenches un-reinforced pre cast concrete cable cover class LV,type I, flat size 250x150x70 mm complete all as specified & directed

Returning, filling in, including spreading, levelling, watering and well ramming in layer not exceeding 25 cm thick complete all as specified

Removing excavated surplus soils meterial not exc.50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified.

M&L Earthing complete with GI plate electrode 600x600x6mm thick, buried directly and preferably vertically in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 mtr below normal ground level, connected with Galvanize earth wire 4 mm dia by means of bolts, nuts, check nuts and washers of copper all as shown in electrical plate No 5, connected to earthing with DBs all as specified including earth work and excavation in any type of soil, PCC 1:3:6 type C1 chamber & RCC 1:2:4 type B1 cover 40mm thick, with 8mm dia steel deformed (TMT bars) reinforcement at 150mm c/c both ways, 20mm dia GI medium grade pipe for watering , water funnel complete all as specified and testing on completion.

Supply and fixing GI light grade pipe 40mm dia for cable protection including taking down old unsv cable protection pipe complete all as specified and directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers

SRI SAI MANIKANTA ENTERPRISES

V R K CONSTRUCTIONS

GVR CONSTRUCTIONS

SUPREET CONSTRUCTIONS

Venkat Associates

CIVILEC ENGINEERING WORKS