Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹1.8 LAccepted-AOC VILLAGE MAHUGA POST OFFICE DIGERH TEHSIL ANNI DISTT KULLU HP | KULLU | HIMACHAL PRADESH | 172001 | L-1 | Accepted-AOC Being 1st Lowest | |
| 2 | L-2₹1.8 L+₹5,307 (3.03%)Rejected-AOC | L-2 | Rejected-AOC Being 2nd Lowest |
Tender Value
₹1.8 L
EMD Value
₹4,000
Closing Date
16 Apr 2026, 9:00 amClosed
EE Nirmand
Executive Engineer outer Seraj Division HP PWD Nirmand
C/o Toilet for disabled and transgender person in Judicial Court complex at Anni
2026_PWD_133877_13
No PW OSDN NIT 2025 480-85 dated 02.04.2026
Open Tender
Civil Works
Percentage
60 days
Nirmand
Please refer Tender documents.
11 documents required · 11 mandatory
₹500
₹4,000
3 Jul 2026
9 Apr 2026
16 Apr 2026
9 Apr 2026
16 Apr 2026
9 Apr 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | 15 mm cement plaster on rough side of single or half brick wall of mix: 1:6 (1 cement: 6 coarse sand) and as per direction of The Engineer-In-Charge complete including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. | - | Square Metre | - | - |
| 2 | Providing and laying vitrified floor tiles in different sizes(thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete iincluding curing and carriage of materials in all leads and lifts as per direction of The Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. | - | Square Metre | - | - |
| 3 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. including carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. | - | Running Metre | - | - |
| 4 | Providing and fixing Polyethelene Aluminium Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes the costs of cutting chases and including testing of joints complete as per direction of the engineer in charge. Concealed work, including cutting chases and making good the wall etc. including curing and carriage of materials in all leads and lifts as per direction of The Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. | - | Running Metre | - | - |
| 5 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including curing and carriage of materials in all leads and lifts as per direction of The Engineer-In-Charge complete. | - | Each | - | - |
| 6 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid curing complete including the cost of form work and hauling of material in all leads and lifts as per the entire satisfaction and direction of Engineer in charge. | - | Each | - | - |
| 7 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete including carriage of materials within all leads, lifts and other incidental and as per the entire satisfaction and directions of Engineer-in- Charge. | - | Square Metre | - | - |
| 8 | Wall painting two coats with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. including carriage of materials with in all kinds of leads, lifts and other incidental and as per the entire satisfaction and directions of Engineer-in-Char | - | Square Metre | - | - |
| 9 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, kg railings, brackets, gates and similar works including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in-Charge. | - | KG | - | - |
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.17 MB
BOQ_197967.xls
BOQ • 0.50 MB
SBDNo13.pdf
Tender Documents • 3.36 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .