Loading
Loading…
Loading…
Tender Value
₹2.4 L
EMD Value
₹4,770
Closing Date
28 Sept 2026, 3:00 pmDue tomorrow
AGM (EM)
FCI RO Shimla
Annual repair and maintenance of existing electrical system at FSD GKT Nurpur for year 2026-27.
2026_FCI_926468_1
01/EM/HP/2026-27
Open Tender
Electrical Works
Percentage
45 days
FSD GKT Nurpur, HP
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹4,770
17 Sept 2026
17 Sept 2026
29 Sept 2026
17 Sept 2026
28 Sept 2026
17 Sept 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Supplying and fixing of 300mm x 300mm size metalic frame cover fabricated with 35 mm x 35 mm x 5 mm thick angle iron welded construction frame structured and 3 mm thick M. S. sheet cover plate panel with double hinges and knobe type locking arrangement including painting, making recess in wall, masonary, plastering & finishing the good (As per drawing) | 22 | Each | 2,258 | ₹49,676 |
| 2LED Flood Light, powder coated pressure die cast aluminium (System lumen efficacy ≥105<120 lm/Watt). Supplying, Installation, Testing & Commissioning of Flood Light, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5⁰C to 50⁰C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P.F.≥0.95, IP-66,IK-10, CRI ≥70, under voltage and over voltage protection, EMI-EMC as per CISPR -15, lenses for beam angle 30 deg-120deg as per the application and the project requirement., suitable tilt able fitting, life time (LED, Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin) , SDCM(Standard Deviation Color Matching)<5,Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105<120 lm/Watt output .LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted.. Shape size and CCT shall be as approved by Engineer-inCharge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). | |||||
| 2.01 | 50 watt | 24 | Each | 1,436 | ₹34,464 |
| 2.02 | 150 watt | 3 | Each | 3,166 | ₹9,498 |
| 3 | Supplying, installation, testing and commissioning of 20W Ultra bright LED Tubelight with very high efficacy & THD <15% best suited for installation in existing tubelight luminaire with G13 lamp holders to give glare free light . | 15 | Each | 803 | ₹12,045 |
| 4 | Supplying, installation, Testing and commissioning of 35 watt LED post top (gate light) made up of pressure die cast aluminium housing with IP 65,IK 07, avg life- 50000 hours with lumen efficacy of >140 lm/W, System efficacy of > 70 lm/W,colour temp5700°K/ 6500 K,THD( %) < 10 with high quality polycarbonate diffuser over the LED module including giving connection etc., at site of work as required.LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted with Minimum 5 year OEM warranty. Shape size and CCT shall be as approved by Engineer-inCharge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). | 2 | Each | 8,916 | ₹17,832 |
| 5Supplying and drawing following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. | |||||
| 5.01 | 3 x 1.5 sq. mm | 68 | Meter | 104 | ₹7,072 |
| 6Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc. as required. | |||||
| 6.01 | 8 Module (125mmX125mm) | 2 | Each | 517 | ₹1,034 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.80 MB
MTFGKT.pdf
Tender Documents • 1.73 MB
BOQ_973593.xls
BOQ • 0.31 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .