Constructing E-01 type 2 Nos (P+2) Quarters at Bayad etc. Dist- Aravalli

Name of work :-

Constructing E-01 type 2 Nos (P+2) Quarters

at Bayad etc. Dist- Aravalli

Bill of Quantities

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

1 Excavation for foundation upto 1.5 m depth including 775.00 Cum 157.08

sorting out and stacking of useful materials and disposing

off the excavated stuff upto 50 Meter lead.(B) Dense or

2 Excavation for foundation for depth from 1.5 m to 3.0 m 148.00 Cum 170.40

including sorting out and stacking of useful materials and

disposing off the excavated stuff upto 50 Meter lead.(B)

Dense or Hard soil

3 Filling available excavated earth (excluding rock) in 957.00 Cum 136.92

trenches. plinth, sides of foundations etc. in layers not

exceeding 20 cm. in depth consolidating each disposited

layer by ramming and watering.

4 Filling in plinth with sand under floors including watering 37.00 Cum 481.80

ramming, consolidating and dressing complete

5 Filling in foundation and plinth with murrum or selected 74.00 Cum 294.38

soil in layers of 20cm. thickness including watering,

ramming and consolidating etc. complete.

6 Providing and laying controlled cement concrete M.150 for 182.00 Cum 4196.55

curing complete including cost of formwork but excluding

the cost of reinforcement for reinforced concrete work in

(A) Foundations, footings,Base of columns and Mass

7 Providing and laying controlled cement concrete M.250 and 287.00 Cum 4503.59

curing complete including cost of formwork but excluding

the cost of reinforcement for reinforced concrete work in

(A) Foundations, footings, Base of columns and Mass

8 Providing and laying controlled cement concrete M250 and 13.00 Cum 7834.57

curing complete including the cost of form work but

excluding the cost of reinforcement for reinforced concrete

work in Columns, pillars posts and struts Column Up to

9 Providing and laying cement concrete 1:4:8 (1- Cement : 4- 27.00 Cum 2826.34

coarse sand : 8- Machine Crushed stone aggregates 40 mm

nominal size) and curing complete excluding cost of

formwork in (A) Foundation and Plinth

10 Providing and laying controlled cement concrete M.250 and 44.00 Cum 5999.40

curing complete including the cost of form work but

excluding the cost of reinforcement for reinforced concrete

work for Ground and Plinth Beams

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

11 Brick work using common burnt clay building bricks having 34.00 Cum 4214.33

crushing strength not less than 35 kg./Sq.Cm. in foundation

and plinth in Cement Mortar 1:6 (1- Cement : 6 -fine sand)

12 Providing and laying controlled cement concrete M.200 and 59.00 Cum 7850.09

curing complete including the cost of form work but

excluding the cost of reinforcement for reinforced concrete

work in Columns, Pillars posts and struts, For All Floors.

13 Providing and laying controlled cement concrete M.200 and 17.00 Cum 11668.09

curing complete including the cost of formwork (Vertical

fins and vertical sun breakers.) and reinforcement for

reinforced concrete work in (B) Walls, for all floor level

14 Providing and laying controlled cement concrete M.200 and 51.00 Cum 6006.07

curing complete including the cost of form work but

excluding the cost of reinforcement for reinforced concrete

work in Beams For All Floors.

15 Providing and laying controlled cement concrete M.200 and 122.00 Cum 6528.31

curing complete including the cost of form work but

excluding the cost of reinforcement for reinforced concrete

work in Slab for All Floors.

16 Providing and laying controlled cement concrete M.200 and 10.00 Cum 6408.43

curing complete including the cost of form work but

excluding the cost of reinforcement for reinforced concrete

work in Lintels For All Floors.

17 Providing and laying controlled cement concrete M.200 and 2.00 Cum 6964.44

curing complete including the cost of form work but

excluding the cost of reinforcement for reinforced concrete

work in Chajja For All Floors.

18 Providing and laying controlled cement concrete M.250 and 11.00 Cum 6993.10

curing complete excluding the cost of formwork and

reinforcement for reinforced concrete work in (E) Staircases

19 Providing TMT Bar FE 500D reinforcement for R.C.C. 76968.00 Kg. 77.29

work including bending, binding and placing in position

complete for All Floor

20 Providing throating or plaster drip and moulding to R.C.C. 6.00 Rmt 43.08

Chhajja by making 5mm to 15mm wide grove as per design

21 Brick work using Common Burnt Clay building bricks 184.00 Cum 4518.81

having crushing strength not less than 35 kg./Sq.Cm. in

Super structure Above plinth level up to All Floor levels in

Cement Mortar 1:6 (1- Cement : 6 -fine sand)

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

22 Half brick masonry in common burnt clay building bricks 46.00 Sqmt 688.92

having crushing strength not less than 35 Kg/Sq.Cm. in

Superstructure above plinth level upto All Floor level in

Cement mortar 1:4 (1- Cement : 4 -coarse sand )

(Conventional).

23 Providing & Fixing Chicken mesh for joint between brick 139.00 Sqmt 173.72

work & RCC work fixing with nail & GI washer as per

director in charge

24 Providing 15mm thick cement mala plaster in single coat on 1231.00 Sqmt 256.58

Rough (Similar)side of single or half brick walls for interior

plastering and finished even and smooth fininshing with a

floating coat of neat cement slurry in (i) Cement mortar 1:3

(1-cement:3-sand), 10x10 mm groves etc. Complete for All

25 Providing 10mm thick cement mala plaster in single coat on 984.00 Sqmt 231.45

brick/concrete walls for interior plastering and finished even

and smooth fininshing with a floating coat of neat cement

slurry in (i)Cement mortar 1:3 (1-cement:3-sand). Complete

for All Floors.

26 20mm thick sand faced cement plaster with Gutka Finish on 717.00 Sqmt 321.10

walls upto height 15 metres above ground level consisting

of 12mm thick backing coat of C.M. 1:3 (1-cement : 3-

sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement :

1-sand) with 5mm grooves, etc. complete.

27 Providing Water Proofing Treatment on Sunk Slab 27.00 Sqmt 370.67

including cement concrete flooring 1:2:4 (1-cement : 2-

coarse sand : 4-graded stone aggregate 20mm nominal size)

laid in one layer and finished with a floating coat of neat

cement average 50mm thick to prepare slope including

water proofing chemical etc. Complete for Sunk Slab for

28 Applying two coats of putty & two coats of primer of 2005.00 Sqmt 40.59

approved brand and manufacture on new wall surface to

give an even shade including thoroughly brushing the

surface free from mortar dropping and other foreign matter

and sand papered smooth.

29 Wall painting (three coats) with plastic emulsion paint of 1021.00 Sqmt 125.52

approved brand and manufacture on undecorated wall

surface to give an even shade including throughly brushing

the surface free from mortar droppings and other foreign

matter and sand papered smooth.

30 Ceiling painting (three coats) with plastic emulsion paint of 984.00 Sqmt 131.02

approved brand and manufacture on ceiling and soffits of

slab surface to give an even shade including throughly

brushing the surface free from mortar droppings and other

foreign matter and sand papered smooth.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

31 Finishing wall with weather proof exterior emulsion paint 927.00 Sqmt 93.93

(two coats) with Damp Proof Coating (one coat) on wall

surface to give an required shape even shade after

thoroughly brushing the surface to remove all dirt, and

remains of loose powdered materials.etc complete

32 Providing and laying polished Blue Kota stone slab flooring 25.00 Sqmt 1019.00

over 20mm (Average) thick base of cement mortar 1:6 (1-

cement : 6-coarse sand) or L.M. 1:1.5 (1-Lime putty :1.5 -

coarse sand) laid over and jointed with grey cement slurry

mixed with pigment to match the shade of slab including

rubbing and polishing etc. complete. (A) 25mm thick

33 Providing and laying Ceramic tiles 6mm thick in skrting 203.00 Sqmt 1090.32

risers of steps and dedo on 10mm thick cement plaster 1:3

(1-cement : 3-coarse sand) and jointed with white cement

34 Providing and fixing pre-cast Rubber Dye / steel Dye inter 313.00 Sqmt 706.93

locking concrete block 60mm thick with grade of concrete

M300 pnumatic compressed / vibrated mechanically and as

per approved design Confirming to IS 15658 :

including 35 mm Sand layer for levelling and filling the

joint with sand in proper line and level as per guidlines of

IRC : SP 63-2018 etc. Complete.

35 Providing and fixing Machine cut & Polished Blue Kota 8.00 Sqmt 1355.42

stone in 7.5 cm width Strip flooring for Ramp even grade

over 20mm (Average) thick base of cement mortar 1:6 (1-

cement : 6-coarse sand) laid over and jointed with grey

cement slurry mixed with pigment to match the shade of

slab including rubbing and polishing etc. complete. (A)

36 P & L 600 mm x 600 mm Double Charged vitrified 10 mm 309.00 Sqmt 1405.92

thick tile flooring over 20 mm (average) base of cement

mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or

fixing on existing flooring by adhesive material including

dismentaling of existing flooring and jointed with color

cement slurry including finised with flush pointing &

cleaning the surface etc. complete for DARK shade

37 P & L 600 mm x 600 mm Glazed vitrified 10 mm thick tile 70.00 Sqmt 1346.35

flooring over 20 mm (average) base of cement mortar 1:6 (

1 cement: 6 coarse sand) on new surface or fixing on

existing flooring by adhesive material including

dismentaling of existing flooring and jointed with color

cement slurry including finised with flush pointing &

cleaning the surface etc. complete for DARK shade

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

38 Providing and laying Readymade Full Body Vitrified tiles 8 47.00 Sqmt 1195.02

to 10 mm thick, in skrting risers of steps and dedo on 10mm

thick cement plaster 1:3 (1-cement : 3-coarse sand) and

jointed with white cement slurry

39 P & L Mate Finished Antiskid Ceramic 10 mm thick tile 27.00 Sqmt 1266.54

flooring over 20 mm (average) base of cement mortar 1:6 (

1 cement: 6 coarse sand) on new surface or fixing on

existing flooring by adhesive material including

dismentaling of existing flooring and jointed with color

cement slurry including finised with flush pointing &

cleaning the surface etc. complete

40 Providing and fixing Machine cut, Free edges, Polished 78.00 Sqmt 2510.86

Granite stone slab flooring 18mm thick for vertical

wall/Doors/Windows Sill, Jams for cladding as per design

including full moulded round inside edge and laid on10mm

thick base of cement mortar 1:3 (1-cement : 3-coarse sand)

jointed with grey cement slurry mixed with pigment to

match the shade of slab including rubbing and polishing etc.

41 Providing and fixing Machine cut Bothside mirror polished 18.00 Sqmt 618.12

kota stone in single piece (Max 150 cm long and width upto

45 cm with both side polished) for horizontal Shelves

including makng grooves & Fixing the same in Brick/

concrete wall finished with flush pointing, round open edge

42 Providing and laying water prooofing treatment with china 284.00 Sqmt 1132.21

mosaic tiles flooring over avg 50 mm C.C. 1:2:4 bedding

maintaining slope for plain and curve surface & 12 mm to

20 mm broken pieces not more than 2.5 cm of ceramic/ of

glazed tiles to be laid over cement mortar 1:3 to plain or

slope and to be tempered to bring mortar creme out upto

surface using white cement including rounding off junctions

and extending them upto 15 cm along the wall,clearing with

water and oxalic acid etc. as directed.

43 Constructing Sandwich Platform of 18mm thick polished 7.00 Sqmt 2760.33

black or selected granite at top and 25 mm thick kota stone

with 75cm height with necessary support using 20mm thick

cement mortar 1:3 for sandwich and fitting at bottom &

edges with waterproof rigid adhesive including making

necessary grooves in walls with vertical support of double

kota stonr sandwich every 60cm centre to centre including

all labour material of approved quality including full

moulded round front edge fixed in wall for partition.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

44 Providing and fixing flush door with Single shutters, solid 55.00 Sqmt 4211.70

core construction with frame of Anodized Alluminium

section (weight not less than 1.1 kg/mt.) with cross board

and finished with 1 mm thick laminate on both side of

shutter, machine glued PVC beading on periphery including

30cm long Stainless Steel Pipe handle on both side SS

ASIS 304 grade, SS Stopper 20cm, SS Aldrop 30cm both

side, anodised alluminium butt hinges with necessary

screws. (B) Non-decorative type and block board core

anodised alluminium butt hinges in flush door shutters (2)

45 Providing and fixing window having extruded aluminum 24.00 Sqmt 1744.27

Colour anodized section frame main outer size 95mm x

24mm x 1.17mm @ wt.of 0.738 Kg/mt , horizontal Three

track member size 92mm x 31.75mm x 1.30mm,@ Wt.1.07

Kg/mt , vertical member of size 92mm x 31.75mm x

1.50mm @ Wt. 1.06 Kg/mt with sliding shutters of

horizontal member size 40 mmx18mm x1.29mm @ wt.of

0.456 Kg/mt, vertical member of size 40mm x 18mm x

mm @ wt.of 0.456Kg/mt/ with 5 mm thick transparent

bronze colour tinted float glass with rubber gasket and

airlock strip anodiazed aluminum fittings and fixtures and

transparent silicon sealant glass fixing to frame as per

details etc. With Mosquito net shutter in outer track.

46 Providing and fixing Standard extruded colour anodized 3.00 Sqmt 1368.55

alluminium section frame weight 1.094 kg/Rmt.with

Adjectable Glass Louvers of 5 mm thick transparent glass

colour tinted float glass with transparent silicon gasket with

allu. Powder coated fittings & fixtures.

47 Providing erecting and fixing double coated ISI water tank 4000.00 Litre 3.95

of required capacity each with all necessary fittings and

connection etc. complete on terrace

48 Providing, laying and jointing in true line and level 110 589.00 Rmt 876.11

diameter U.P.V.C (Type B) conforming to IS 13592-1992

with one end plain and other end socketed with rubber ring,

& fittings conforming to ISI 14735-1999 of approved make

for drainage system pipe line, pipe shall be jointed with

each other with rubber lubricant, pipe shall be fixed on wall

using of PVC clamp of the size 110 mm diametre x 149 mm

length x 145 mm heigh at every 2000 mm center to center

or shall be concealed in walls as directed including

necessary fittings such as bends, shoes etc. including testing

of pipes and joints and jointed with adhesive solvent cement

including cost of all materials.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

49 Providing, laying and jointing in true line and level 160 60.00 Rmt 834.38

diameter U.P.V.C (Type B) conforming to IS 13592-1992

with one end plain and other end socketed with rubber ring,

& fittings conforming to ISI 14735-1999 of approved make

for drainage system pipe line, pipe shall be jointed with

each other with rubber lubricant, pipe shall be fixed on wall

using of PVC clamp of the size 160 mm diametre x 210 mm

length x 196 mm heigh at every 2000 mm center to center

or shall be concealed in walls as directed including

necessary fittings such as bends, shoes etc. including testing

of pipes and joints and jointed with adhesive solvent cement

including cost of all materials.

50 Providing laying and jointing in true line and level 40mm 130.00 Rmt 148.12

dia. U.P.V.C. Pipe ( SCH- 40) for cold water including

fittings as approved by Engineer In Charge. Pipe shall be

fixed on the wall with the help of clamp at every two metre

C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all

Providing laying and jointing in true line and level 25mm 40.00 Rmt 91.84

dia. U.P.V.C. Pipe ( SCH- 40) for cold water including

fittings as approved by Engineer In Charge. Pipe shall be

fixed on the wall with the help of clamp at every two metre

C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all

materials. laying and jointing in true line and level 15mm

52 Providing 120.00 Rmt 72.65

dia. U.P.V.C. Pipe ( SCH- 40) for cold water including

fittings as approved by Engineer In Charge. Pipe shall be

fixed on the wall with the help of clamp at every two metre

C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all

materials. and fixing concealed center point to wall ceiling

53 Providing 210.00 Rmt 253.82

& floor CPVC (SDR 13.5) PIPE having National Sanitation

Foundation (NSF) seal for potable water of following dia.

nominal bore tube fittings and clamps including making

good the wall, ceiling and floor etc. complete. 25 mm.

54 Providing and fixing concealed center point to wall ceiling 120.00 Rmt 170.36

& floor CPVC (SDR 13.5) PIPE having National Sanitation

Foundation (NSF) seal for potable water of following dia.

nominal bore tube fittings and clamps including making

good the wall, ceiling and floor etc. complete. 15 mm.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

55 Providing and fixing Gun metal check or non-return fullway 12.00 Nos. 663.43

wheel valve.(E) 40mm dia.

56 Providing and fixing ball cock of approved. quality as 2.00 Nos. 189.84

directed.(A) Copper Metal (ii) 50mm dia.

57 Providing and fixing C.P. brass shower rose with 15mm or 6.00 Nos. 282.16

20mm inlet.(A) 100mm dia. Each

58 Providing and fixing wash down water closet (Wall Hung 6.00 Nos. 5172.51

type, W.C. Pan) with integral P or S trap, Health Fauset

Heavy Duty with hook and PVC dual flush tank with

complete fittings including jointing the trap with soil pipe

in Cement Mortar 1:1 (1-Cement : 1-fine sand) (Seal and

cover to be measured and paid for separately)(A) vitreous

China Pattern :(i) in white colour

59 Providing and fixing washbasin (ii) Flat Back washbasin 8.00 Nos. 2180.72

550 mm x v 400mm size. (i) In white colour including with

approved sanitary grade material with CP waste coupling,

waste pipe, 15mm dia Pillar & Stop Cock of approved

brand with connection 15mm dia flexiable pvc pipe etc.

60 Providing and fixing Kitchen sink with C.I. or M.S. 2.00 Nos. 2987.88

brackets, painted white including cutting holes in walls (C)

Vitreous China Sink.(i) 600mm x 450mm x 150mm size

including approved sanitary grade material with CP waste

coupling, waste pipe, 15mm dia Pillar & Stop Cock of

approved brand with connection 15mm dia flexiable pvc

pipe etc. complete

61 Providing and fixing brass screw down stop tap.(A) 15mm 17.00 Nos. 205.83

62 Providing and fixing PVC SWR Nahni trap IS 14735 for 10.00 Nos. 586.60

drain - 100 mm diameter with jali of the following nominal

diameter of self cleansing design with C.I scread down or

hinged grating including the cost of cutting and making

good the walls.

63 Providing and fixing S.W. gully trap with C.I. grating brick 10.00 Nos. 1246.92

masonry chamber and water tight C.I. cover with frame of

300mm x 300mm size (inside) with standard weight.(i)

Square mouth traps.(B) 150mm x 100mm size P or R type

64 Providing and fixing C.P. brass towel rail comlete with C.P. 8.00 Nos. 616.42

brass brackets fixed to wooden plugs with C.P. brass

scews.(B) 600mm x 20mm size.

65 Providing and fixing 600mm x 450mm bevelled edge 8.00 Nos. 859.41

mirror of superior glass mounted on 6mm thick A.C. sheet

or plywood sheet and fixing to wooden pluge with C.P.

brass screws and washers.

66 Providing and fixing in position PVC cowel went to pipes 15.00 Nos. 101.00

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

67 Constructing brick masonry chamber for underground C.I. 10.00 Nos. 3660.76

Inspection chamber and bends with bricks having crushing

strength not less than 35Kg/Cm2 in C.M. 1:5 C.I. cover

with frame (Light duty) 455mm x 610mm intenal

dimensions total weight of cover with frame to be not less

than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. )

(R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse sand

:4-graded stone aggregate 20mm size) foundation concrete

1:5:10 inside plaster 15mm thick with cement mortar 1:3

finished smooth with a floating coat of neat cement on walls

and bed concrete etc. complete.(ii) Inside dimensions

500mm x 700 mm and 450mm deep for pipe line with one

68 Providing sock pit of 5.00 Cu.M. Volume including 2.00 Nos. 3445.18

excavating and filling brickbats with dry masonry work at

top for 45cm. height including covering the top with stone

including providing vatas in C.M. 1:3 with finishing curing

etc. complete as directed.

69 Applying general insecticide pest control treatment to 313.00 Sqmt 80.62

floors, cupboards etc including labour materials etc.

complete. Using Imidacloprid 30.5 SCas Per IS 6313 part -

II( (0.075% concentration by mass) is recommended 10.5ml

chemical diluted with 5 liters of water application 0.5 litre

chemical /Sqm of surface is recommended as per I.S.

70 Providing and fixing Safety Grills of required pattern for 2707.00 Kg 109.48

windows/door using MS polished bars, Rectangular CRS

Pipes of size 50mm x 30mm x 2mm or Required at required

spacing as per design and hold fast with coach bolts

including one coat of and two coats of matt finished oil

painting etc. complete

71 Providing and fixing 90 cm high Stainless Steel railing 63.00 Rmt 3760.33

made from anticorrosive 304 grade S.S. pipe of 50 mm dia.

(16 gauge) as hand rail with S.S.304 grade baluster of

mm dia (16 gauge) as a vertical support fixed in RCC Slab/

steps of stair at 1.2 mt. c/c including three horizontal S.S.

pipes of 16 mm dia (16 gauge) at equal distance fixed by

mm dia (16 gauge) S.S. pipe with baluster including

accessories as per detailed drawing as directwed etc.

72 Steel work, welded in built up sections framed work 13.00 Quintal 9108.48

including cutting, hoisting, fixing in position and applying a

priming coat of red lead paint. (A)In beams and joists,

channels angles Tees, flats, with connecting plates or angle

cleats as in main and cross beams. Hip and jack rafters,

purlins conneted to common rafters and the like

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

73 Providing and laying controlled cement concrete M.150 and 7.00 Cum 7426.53

curing complete excluding the cost of formwork and

reinforcement for reinforced concrete work for Coping

74 Providing & laying weep hole in Aburtments, and returns 205.00 Each 86.73

by using A.C. pipe of 100mm including laying in proper

grede and jointing the completed as per detailed

75 Drilling of pilot bore hole of size 250/300 mm diameter at 325.00 Rmt 1544.29

above site by mud finish direct rotary rig etc. complete

76 Reaming of 250/300 mm diameter pilot bore hole to size 275.00 Rmt 742.35

450 mm diameter including assembling, lowering housing,

casing strainer pipes with gravel packing and clay ball

packing etc. complete.

77 Providing 600 CFM / 150 PSI capacity air compressor upto 1.00 Job 25118.70

available of sand free discharge ( Minimum 6.0 Hours)

78 Supply of reducer made frim 6 mm thick plate (M.S.) for 1.00 Nos. 2009.90

ERW pipe of size (ii) 200 mm dia. x 250 mm dia. X

79 Supply of 200 mm diameter V-wire screen pipe of slot size 120.00 Rmt 1401.88

1.0 mm nominal hole etc. complete.

80 Supply of M.S. Bore clamps with 3 holes on either side 1.00 Pair 1753.36

with nuts and bolts of standard make and suitable size (g)

750 mm x 75 mm x 16 mm flat to 200 mm dia. Pipe.

81 Supply of Bore Plug having 100 mm height made from 1.00 Nos. 834.26

M.S. plate with 3 holes at equal distance on circumference

for nuts-bolts type, locking arrangement with nut-bolts &

lock nuts of standard make complete. (b) from 5 mm thick

M.S. plate (for top also) (ii) suitable for 200 mm dia. pipe.

82 Supply of M.S. Bail Plug having length of 0.45 mtr from 1.00 Nos. 907.99

medium class pipe as per I.S.S. suitable for (b) 200 mm

diameter pipe etc. complete.

83 Supply of Steel Bent plates suitable to ERW pipe for (b) 8.00 Nos. 71.71

200 mm diameter and 150 x 150 x 6 mm size etc. complete.

84 Supply of Gravel of size selected size up to 4mm to 6 mm, 6.00 Cmt 2295.73

including stacking and filing etc. complete.

85 Charges for uptron make Electrologger (with carting ) of 1.00 Job 12120.00

pilot bore hole etc. complete.

86 Charges for Geo Hydrological ground water investigation 5.00 Job 16160.00

including water sample chemical analysis etc. complete.

87 S.I.T.C. submersible pump set suitable for bore of 150 mm 1.00 Each 49148.62

dia or more having 3 phase motor capacity not less than

HP with following capacity. Lifting and Lowering taken

extra. [C] 25 stage 160 to 100 LPM discharge at 185 to

mtr head for 50 mm dia delivery pipe

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

88 Providing and erecting PVC corrugated Flexible conduit 250.00 Rmt 26.26

with required numbers of coupling, PVC bushes, Check-

nuts etc. complete of following sizes. (3) 32 mm diameter

89 Lowering of submersible motor pump set complete with 1.00 Job 2568.43

required. Nos. and size of casing pipes erected by means of

proper chain pulley block & pipe wrenches after checking

of threads of each pipe with coupling to take the load of the

pump set and pipe assembly filled up with water. (B) Above

60 mtr and up to 120 mtr

90 Supplying and erecting approved make motor control 1.00 Each 8710.24

cubical panel (Direct - on - line) made from 16 G. CRCA

sheet duly epoxy powder painted inside and outside with

hinged doors and locking, arrangement consisting of

suitable size of ON-OFF isolator (AC - 3/23 duty) main

fuses, single phasing preventer, indicating lamps for R-Y-B

phases, overload relay, automatic water level controller,

Ammeter, Voltmeter each with two way selector switch

incoming, wires duly socket crimped, main contactor &

overload relay, start-stop push buttons, to be erected on

angle iron frame grouted on wall as directed. The isolator,

overload relay & contactors will be of L&T, Seimens or

BCH make only (a) DOL upto 7.50 H.P.

91 Supplying and erecting XLPE (IS:7098) (I)-88 ISI 275.00 Rmt 136.35

unarmoured copper cable 1.1 KV grade to be erected as

directed of following size. (E) 3 core 2.5 Sq. mm

92 Providing laying and jointing in true line and level 50mm 200.00 Rmt 195.67

dia. U.P.V.C. Pipe ( SCH- 40) for cold water including

fittings as approved by Engineer In Charge. Pipe shall be

fixed on the wall with the help of clamp at every two metre

C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all

materials. and fixing butterfly valve of IS approved brand

93 Providing 2.00 Nos. 1595.80

94 Excavation for foundation for depth from 1.5 m to 3.0 m 34.00 Cum 287.47

including sorting out and stacking of useful materials and

disposing off the excavated stuff upto 50 Meter lead.(C)

95 Providing and laying coloured glazed tiles of the size 300 46.00 Sqmt 1487.88

mm x 450 mm x 8 mm in skirting, risers of steps and dedo

on 10 mm. thick cement plaster 1:3 (1 cement : 3 coarse

sand) & jointed with white cement slurry.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

96 Providing and fixing window having extruded aluminum 2.00 Sqmt 1583.96

Colour anodized section frame main outer size 95mm x

24mm x 1.17mm @ wt.of 0.738 Kg/mt , horizontal Three

track member size 92mm x 31.75mm x 1.30mm,@ Wt.1.07

Kg/mt , vertical member of size 92mm x 31.75mm x

1.50mm @ Wt. 1.06 Kg/mt with sliding shutters of

horizontal member size 40 mmx18mm x1.29mm @ wt.of

0.456 Kg/mt, vertical member of size 40mm x 18mm x

mm @ wt.of 0.456Kg/mt/ with 5 mm thick transparent

bronze colour tinted float glass with rubber gasket and

airlock strip anodiazed aluminum fittings and fixtures and

transparent silicon sealant glass fixing to frame as per

97 Providing and fixing C.I. Manhole cover 0.60 M. x 0.45M. 5.00 Nos 958.17

size having weight not less than 35Kg.

98 Clearing and grubbing road land including uprooting rank 1.00 Hectare 28455.09

vegetation grass bushes, shrubs, sapling and trees girth up to

300 mm removal of stumps of trees cut earlier and disposal

of unserviceable materials (C) By mechanical means in area

of light jungle

99 Earthwork in cuting in all sorts of soil and soft murrum 33.00 Cum 134.20

including conveying and spreading the stuff, embankment

as and where directed within 200meters from the end of the

cutting with all required lead and lift.

100 Earthwork for embankment including breaking clods, 1237.00 Cum 131.93

dressing with all lead and lift (including watering and

consolidation)(A) From Borrow pits within land width

101 Rolling and consolidation of soling including filling in 1555.00 Sqmt. 22.75

depression which occur during the process, with power roler

8 tonne to 12 tonne..

102 Box cutting the road surface to proper slope and camber for 255.00 Cum 109.05

making a base for road work including removing the

excavated stuff and depositing on the road side slope as

directed upto 50Mt.lead.

103 Construction of B.I.T.C. granular sub base by providing 128.00 Cum 951.87

granular material of Grading II, spreading in uniform layers

with motor grader on prepared surface , mixing by mix in

place method with front end loader at OMC , and

compacting with vibratory roller to achieve the desired

density ,complete as per Clause

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

104 Providing, laying, spreading and compacting stone 74.00 Cum 1280.35

aggregates of specific sizes to water bound macadam

(Grade-II) (B.T. Metal of size 45 to 63 mm) specification

including spreading in uniform thickness, hand packing,

rolling with 3 wheeled steel/ vibratory roller in stages to

proper grade and camber, applying and brooming requisite

type of screening/ binding Materials to fill up the interstices

of coarse aggregate, watering and compacting to the

required density.

105 Compaction and finishing of cement concrete road by 450.00 Sqmt. 72.72

trimix process providing extra labour charges for the trimix

vaccum dewatering service process on cement concrete road

surface by using vaccum dewatering pump floater surface

vibrator including making rough finish to surface as per in

including levelling the complete.

106 Supplying and fixing reinforced concrete heavy duty non- 20.00 Rmt. 659.99

pressure pipes with collars for culverts carrying heavy

traffic as per IS 458-1991 specifications including setting

the pipes in C.M. 1:2 watering and laying (to level or

slopes) of class NP3 of following internal daimeters.(i)

107 Construction of Cattle trap made from ISMC 100 border 5.00 Sqmt. 6146.86

and G.I. pipe 50 mm dia. Heavy duty at 12cm spacing by

welding and for supports 2 nos. I.S.M.C. 100x75x6 section

fixing in prepared chamber as per drawing.

108 Constructing Brick masonry road gully chamber 500mm x 12.00 Nos. 2017.19

450mm x 600mm including 500mm x 450mm C.I.

horizontal grating wih frame complete.

109 Supplying of yellow or Goradu soil with all lead and lift 129.00 Cum 505.00

including spreading watering dressing and rolling with hand

roller etc complete selected soil

110 Supplying of well rotted FYM manure with all lead and lift 7.00 Cum 378.75

including spreading mixing dressing and rolling with hand

roller etc. complete

111 Scarifying the surface of soil including spreading of DAP 430.00 Sqmt. 26.26

fertilizer mixing with soil properly leveling ground dressing

112 Supplying and planting Dibbling semi carpet lawn at 430.00 Sqmt. 90.90

distance of about 15 cm x 15 cm after proper anti termite

treatment and rolling the same by hand roller and watering

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

113 Bowling and developing flowering plants grown in nursery 20.00 Nos. 505.00

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Deserted Bottom Palm

114 Bowling and developing flowering plants grown in nursery 15.00 Nos. 656.50

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Deserted Triangle Palm

115 Bowling and developing flowering plants grown in nursery 25.00 Nos. 80.80

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Jasud

116 Bowling and developing flowering plants grown in nursery 25.00 Nos. 85.85

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Croton

117 Bowling and developing flowering plants grown in nursery 15.00 Nos. 85.85

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Deserted Croton

118 Bowling and developing flowering plants grown in nursery 25.00 Nos. 70.70

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Deserted Croton Petra

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

119 Bowling and developing flowering plants grown in nursery 25.00 Nos. 40.40

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Deserted Croton Petra Live Plant

120 Bowling and developing flowering plants grown in nursery 25.00 Nos. 101.00

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Deserted Golden Durenta Varigated

121 Bowling and developing flowering plants grown in nursery 25.00 Nos. 85.85

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Deserted Crotons Variety

122 Bowling and developing flowering plants grown in nursery 300.00 Nos. 35.35

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Deserted Green Mahindi

123 Bowling and developing flowering plants grown in nursery 35.00 Nos. 85.85

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Deserted Varigated Ficus

124 Bowling and developing flowering plants grown in nursery 25.00 Nos. 70.70

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Deserted New Black Ficus

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

125 Bowling and developing flowering plants grown in nursery 15.00 Nos. 45.45

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Deserted White Ribbon Plants

126 Bowling and developing flowering plants grown in nursery 50.00 Nos. 60.60

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Deserted Green Mahendi border

127 Bowling and developing flowering plants grown in nursery 10.00 Nos. 95.95

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Deserted Pendulla Asopalav

128 Bowling and developing flowering plants grown in nursery 10.00 Nos. 121.20

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Deserted Potted Plants

129 Labour charges for planting various plantsafler proper anti- 645.00 Nos. 70.70

termite treatment in pits including placing properly and

filling the pits with required prepared mix soil and watering

and dispporting etc. complete

130 Maintance of the garden for 60 days after Complition of 3 1.00 Job 25250.00

month stipulated period is completed for plantation of lawn

and plants including applying second round of proper anti-

termite treatment

131 Rubber Hose Pipe 15 mm dia of approved brand and make 30.00 Rmt 90.90

132 Excavation for foundation upto 1.5 m depth including 80.00 Cum 122.99

sorting out and stacking of useful materials and disposing

off the excavated stuff upto 50 Meter lead.(A) Loose or soft

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

133 Providing & Laying Rain Water Junction Chamber of Clear 6.00 Nos. 6241.80

Internal Size 0.60 x 0.60 x 0.75m with excavation of size

1.36 x 1.36m & 0.15m thick M200 Bed Concrete Including

brick masonary 0.23 thick wall in C.M. 1:6 of 0.75m height

with 15mm thick Cement Plaster inside & outside (1:4),

1.06 x 1.06 RCC M200 top slab of thickness 0.15m with

TMT steel and 455mm x 610mm cast iron manhole cover

with frame weight not less than 35 kg as per directed by

Engineer-in-charge.

134 Providing & Laying Filter chamber of brickwork 0.23 thick 6.00 Nos. 22067.49

in C.M. 1:6 of clear internal size 2.04m x 1.20m x 1.20m

and excavation dimension of 2.80m x 1.96m x 1.35m

including C.C. M200 Bed Concrete 0.15m thick and RCC

M200 Top slab of thickness 0.15m with TMT steel,

Including 15mm (1:4) thick cement plaster inside & outside

with Cement slurry & top cover with frame of minimum

weight of 35kg, including filling filter material of 200mm

thick each layer of 25-40mm, 10-20mm of BT metal and

sand as per directed by engineer-in-charge

135 Providing & Laying Water Harvesting Pit of clear size 2.00 1.00 Nos. 32558.36

mt x 2.00 mt x 4.00 mt. For water logging with excavation

in any strata upto four meter depth, Brick work 0.23 thick in

C.M. 1:6 of clear internal size 2.00m x 2.00m x 1.20m with

15mm thick C.M. 1:4 plaster, filling the pit with B.T. metal

40mm in 0.60 mt. depth with 25-40mm kaptchi, 0.30 mt.

depth and 2mt. depth with coarse sand in layers including

makng P.V.C. line for water inlet etc. as directed with

250mm dia bore 15mt. depth amd 150mm dia PVC pipe of

10 Kg.f/cm2 casing wih gravel packing or as directed.

136 II) Fire Extinguisher and Exit Signages Supply, 12.00 Nos. 6447.84

installlation, testing and commissioning of Carbon Dioxide

(CO2) type Fire Extinguisher of 4.5 kg confirm to IS:15683,

with ISI marked / TAC approved fitted with required

accessories including wall suspension brakets.

137 Supply, Installation, Testing & Commisioning of ABC type 12.00 Nos. 2222.00

6kg confirm IS:15683, with ISI marked / TAC approved

fitted with required accessories including wall suspension

138 Excavation for foundation upto 1.5 m depth including 27.00 Cum 272.57

sorting out and stacking of useful materials and

disposing off the excavated stuff upto 50 Meter lead.(B)

Dense or Hard soil

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

139 Excavation for foundation for depth from 1.5 m to 3.0 m 9.00 Cum 498.93

including sorting out and stacking of useful materials

and disposing of the excavated stuff upto 50 Meter

lead.(C) Hard Murrum

140 Providing and laying cement concrete 1:5:10 (1- Cement : 5- 2.00 Cum 2566.77

fine sand : 10- graded brick bat aggregates 40mm nominal

size) and curing complete excluding cost of formwork in

(A) Foundation and Plinth

141 Half brick masonry in common brunt clay building bricks 19.00 Sqmt. 618.79

having crushing strength not less than 35 Kg/Sq.Cm. in

Cement mortar 1:5 (1- Cement : 5 -coarse sand ) in

foundation and plinth (B) Conventional

142 Providing and laying cement concrete flooring 1:2:4 (1- 13.00 Sqmt. 352.01

cement : 2-coarse sand : 4-graded stone aggregate 20mm

nominal size) laid in one layer and finished with a floating

coat of neat cement. (B) 50mm thick.

143 Providing 15mm thick cement plaster in single coat on 82.00 Sqmt. 184.78

Rough (Similar)side of single or half brick walls for

interior plastering upto floor two level and finished even

and smooth in (i) Cement mortar 1:3 (1-cement:3-sand)

144 Providing and Laying ordinary cement concrete 1:2:4 (1- 3.00 Cum 6888.15

Cement 2- coarse sand : 4- graded stone aggregates 20 mm

nominal size) and finishing smooth with curing etc.

complete including the cost of formwork but excluding the

cost of reinforsement for R.C.C work in (iii) Slabs having

more than 10 cm and upto 13 cm. thickness

145 Providing and laying (to level or slopes) and jointing with 10.00 Rmt 317.47

stiff mixture of Cement Mortar in proportion 1:1 Salt glazed

stoneware pipes including testing of pipes and joints

complete.(B) 150mm dia.

146 Providing and Constructing sock pit of 3.46 mt. dia outside 2.00 Nos 41229.21

and 5 mt depth with honey combed masonary 6.50 mt. from

bottom and 0.60 mt. brick masonary in C.M. 1:6 top with

RCC slab cover of M200 vent pipe 1.8mt. Long 75mm dia

& C.I. cover and cowel vent etc. comp

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

147 Point wiring for Light / Bell with 2-1.5 sq.mm & earth 94.00 Pt 485.81

wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV

grade FRLS PVC insulated multi strand copper wires up to

10 mtr length , in below type of pipe erected with 6A

Modular type switch / bell push & accessories and earth

continuity of following type, erected on PVC /

Metallic/Wooden box, single mounting base frame covered

with textured/metallic/white front plate modules erected on

/ in wall / ceiling as per pipe erected, with necessary Lamp

holder/ceiling rose / H.D.Connector as directed.(f) with

medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete Cat. III

148 Point wiring for Light / Bell with 2-1.5 sq.mm & earth 18.00 Pt. 242.91

wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV

grade FRLS PVC insulated multi strand copper wires up to

10 mtr length , in below type of pipe erected with 6A

Modular type switch / bell push & accessories and earth

continuity of following type, erected on PVC /

Metallic/Wooden box, single mounting base frame covered

with textured/metallic/white front plate modules erected on

/ in wall / ceiling as per pipe erected, with necessary Lamp

holder/ceiling rose / H.D.Connector as directed.(f) with

medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete Cat. III BATH / W.C.

/TOILET Cat - III

149 Point wiring for Two Way Controlled Light Point with 2- 12.00 Pt 603.98

1.5 sq.mm & earth wire of 1.5 sq.mm (green) both are of

.ISI marked 1.1 KV grade FRLS PVC insulated multi strand

copper wires erected in below type of pipe with 6A Modular

type switches and following type of accessories erected on

PVC / Metallic/Wooden box, single mounting base frame

covered with textured / metallic/white front plate modules

erected on / in wall / ceiling as per pipe erected. with

necessary batten/angle holder or ceiling rose or

H.D.Connector as directed..(f) with medium class Rigid

PVC pipe and accessories erected concealed in wall/ceiling

complete Cat. III

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

150 Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 23.00 Pt 674.68

sq.mm (Green) both are of .ISI marked 1.1 KV Grade

FRLS PVC insulated multi strand copper wires up to 10 mtr

length, in below type of pipe erected with 6A Modular

type switch and hum free EME step type electronic fan

regulator mounted and accessories with earth continuity of

following type erected on PVC / Metallic/Wooden box,

single mounting base frame covered with

textured/metallic/white front plate modules erected on / in

wall / ceiling as per pipe erected. with necessary ceiling rose

/ H.D.Connector as directed.(f) with medium class Rigid

PVC pipe and accessories erected concealed in wall/ceiling

complete Cat. III

151 Point wiring for Individual Plug with & earth wire of 1.5 12.00 Pt 510.05

sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS

PVC insulated multi strand copper wires up to 10 mtr

length, in below type of pipe erected complete with

Modular type switch & 5 pin Plug erected on PVC /

Metallic/Wooden box covered with appropriate front plate

modules erected on / in wall / ceiling as per pipe erected

with following type of accessories. [I] For 6A Plug and 6 a

switch with 2-1.5 sq.mm Cu. Wire from nearby

switchboard/mcb db board (f) with medium class Rigid

PVC pipe and accessories erected concealed in wall/ceiling

complete Cat. III

152 Point wiring for on board Looped Plug with 6A Modular 30.00 Pt. 257.55

type switch & 5 pin socket erected on PVC /

Metallic/Wooden box, single mounting base frame covered

with textured / metallic/white front plate modules erected

on / in wall / ceiling with following type accessories Cat. III

153 Providing following type of Modular Type Accessories 2.00 Ea. 160.59

mounted with PVC / metallic/Wooden box, single mounting

base frame covered with textured / metallic/white front

plate , modules erected with necessary connections as per

site situation directed by Engineer In charge.(3) Two Pin/RJ-

11 Telephone Socket [A] For One Gang Cat.III

154 Providing following type of Modular Type Accessories 4.00 Ea. 160.59

mounted with PVC / metallic/Wooden box, single mounting

base frame covered with textured / metallic/white front

plate , modules erected with necessary connections as per

site situation directed by Engineer In charge.(3) Two Pin/RJ-

11 Telephone Socket [A] For One Gang Cat.III (4) TV Co-

axial Socket outlet CAT-III

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

155 Providing following type of Modular Type Accessories 6.00 Ea. 180.79

mounted with PVC / metallic/Wooden box, single mounting

base frame covered with textured / metallic/white front

plate , modules erected with necessary connections as per

site situation directed by Engineer In charge.(3) Two Pin/RJ-

11 Telephone Socket [A] For One Gang Cat.III (4) TV Co-

axial Socket outlet CAT-III (9) 16 Amp. SP one way

156 Providing following type of Modular Type Accessories 18.00 Ea. 199.98

mounted with PVC / metallic/Wooden box, single mounting

base frame covered with textured / metallic/white front

plate , modules erected with necessary connections as per

site situation directed by Engineer In charge.(3) Two Pin/RJ-

11 Telephone Socket [A] For One Gang Cat.III (4) TV Co-

axial Socket outlet CAT-III (10) 6/16Amp. Universal

157 Providing following type of Modular Type Accessories 12.00 Ea. 410.06

mounted with PVC / metallic/Wooden box, single mounting

base frame covered with textured / metallic/white front

plate , modules erected with necessary connections as per

site situation directed by Engineer In charge.(3) Two Pin/RJ-

11 Telephone Socket [A] For One Gang Cat.III (4) TV Co-

axial Socket outlet CAT-III (14) 6A/ 10A/ 16A/ 20A/

25A/ 32A Double Pole Modular MCB Switch CAT-III

158 Providing following type of Modular Type Accessories 8.00 Ea. 494.90

mounted with PVC / metallic/Wooden box, single mounting

base frame covered with textured / metallic/white front

plate , modules erected with necessary connections as per

site situation directed by Engineer In charge.(3) Two Pin/RJ-

11 Telephone Socket [A] For One Gang Cat.III (4) TV Co-

axial Socket outlet CAT-III (21) Foot Light as per

colour requirement with concealed box, modular

accessories, acrylic glass cover with suitable LED watt

with all accessories as per following module (b) Four

159 Providing and erecting ISI mark Medium class RIGID PVC 440.00 Mtr. 24.24

PIPES of following size complete to be erected on/in wall

or ceiling erected with necessary PVC fittings & Junction

boxes fixed with adhesive solution & Clamps with

following dia of pipes, in approved manner as directed

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

160 Providing and erecting ISI mark Medium class RIGID PVC 160.00 Mtr. 33.33

PIPES of following size complete to be erected on/in wall

or ceiling erected with necessary PVC fittings & Junction

boxes fixed with adhesive solution & Clamps with

following dia of pipes, in approved manner as directed (b)

161 Providing and erecting Mains with 1.1 KV grade FRLS 820.00 Mtr. 82.82

PVC insulated ISI marked stranded Copper conductor wire

in following type of pipe to be erected concealed in

/flushed on wall/ceiling, with 1.5 sq. mm copper conductor

FRLS PVC insulated stranded wire of green colour for earth

continuity of following size (A) With medium class Rigid

PVC pipe and accessories (b) 2 wire 2.5 sq. mm

162 providing and erecting Mains with 1.1 KV grade FRLS 240.00 Mtr. 112.11

PVC insulated ISI marked stranded Copper conductor wire

in following type of pipe to be erected in / on wall / ceiling

with 2.5 sq. mm copper conductor FRLS PVC insulated

stranded wire of green colour for earth continuity of

following size (A) with medium class Rigid PVC pipe and

accessories (a) 2 wire 4 sq. mm

(use earth wire of 2.5 sq.mm )

163 providing and erecting Mains with 1.1 KV grade FRLS 70.00 Mtr. 425.21

PVC insulated ISI marked stranded Copper conductor wire

in following type of pipe to be erected in / on wall / ceiling

with 2.5 sq. mm copper conductor FRLS PVC insulated

stranded wire of green colour for earth continuity of

following size (A) with medium class Rigid PVC pipe and

accessories (a) 2 wire 4 sq. mm

(use earth wire of 2.5 sq.mm ) (i) 4 wire 10 sq. mm

(use earth wire of 4 sq.mm )

164 providing and erecting Mains with ISI marked, 1.5KV grade 32.00 Mtr. 56.56

electrolyte multi stranded, annealed copper conductor with

heat resistant PVC insulated conforms to IS 694, IEC -

erected in existing pipe of following size (Specifically for

control panel, relays, power switchgears, motor starters &

control wiring) with required size of copper lugs, nuts and

bolts if required.(e) One wire 6.00 sq. mm

165 providing and erecting Mains with ISI marked, 1.5KV grade 8.00 Mtr. 300.98

electrolyte multi stranded, annealed copper conductor with

heat resistant PVC insulated conforms to IS 694, IEC -

erected in existing pipe of following size (Specifically for

control panel, relays, power switchgears, motor starters &

control wiring) with required size of copper lugs, nuts and

bolts if required.(e) One wire 6.00 sq. mm (i) One wire

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

166 Supplying and erecting Flexible PVC insulated multi strand 80.00 Mtr. 46.46

multi core 1.1 kv grade ISI marked copper wires of

following size to be erected as directed.(e) 1.50 Sq.mm

core round PVC sheathed

167 Providing & Erecting approved make following size of TV 140.00 Mtr. 62.62

Co-axial flexible cable comprising inner conductor of solid

bare copper insulated with Foam PE & Secondary

conductor made of poly - Aluminium film bonded Al.

Braids @ suitable coverage overall sheathed with black

PVC insulation. (e) RG-11

168 Supplying & erecting approved make Telephone Cable 60.00 Mtr. 20.20

electrolytic copper conductor PE insulation twisted in two

pairs, & wrapped with FRLS PVC tape & sheathed with

FRLS PVC or HFFR outer Jacket suitable for telephone

wiring & confirming to C-DOT erected in existing pipe. of

following size of conductors & nos.of pairs. With necessary

connections.[A] Conductor Size 0.5 mm (a) Unarmoured

169 Providing & erecting Switch board for Computer or 10.00 Ea. 1133.22

electric apparatus consisting of following modular type

accessories mounted with PVC / Metallic concealed/open

box with single mounting base frame covered with

textured/metallic /white front plate,modules erected with

necessary connections as directed

1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch

3 nos. 6A 5 pin Plug For Modular Type Accessories cat-

170 Decorative call bell Ting-tong box type 250 volts complete 2.00 Ea. 71.71

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

171 Supplying and erecting LED indoor fittings with LEDs of 86.00 Ea. 373.70

wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be made of thick

sheet Steel conforming to IS: 513/CRCA/ aluminium die

cast powder coated and high U.V. & corrosion resistance

with diffuser with company mark/name 160V to 270V,

Power Factor more than 0.95, THD < 15%,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE:

Below description have shown ranges of Wattage capacity

of LED fittings.The Engineer incharge may select any

wattage capacity between the ranges shown.)(A) Tube Light

with integral driver (iv) 22-24 Watts, Surge - 2KV,IP-20,

conventional 4 feet cat III

172 Supplying and erecting led lamps with following wattage 8.00 Ea. 188.87

capacity of 220 to 240 voltage, minimum 15000 burning

hours life, 500 V in built-surge protection,Polycarbonate

diffuser, mounting suitable for E14 / E27 / B22 lamp

(A) LED Lamps integral type, with PC diffuser suitable

LAMP holder (iii) 10 to 15 watts cat-III

173 Supplying and erecting LED indoor fittings with LEDs of 6.00 Ea. 312.09

wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be made of thick

sheet Steel conforming to IS: 513/CRCA/aluminium

pressure die cast powder coated and high U.V. & corrosion

resistance with diffuser housed in aluminium casted body

with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE:

Below description have shown ranges of Wattage capacity

of LED fittings.The Engineer incharge may select any

wattage capacity between the ranges shown.)(H) Mirror

Light 9 Watts, wall mounted minimum 1 feet long

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

174 Supplying and erecting LED street light / Flood light 13.00 Ea. 4997.48

fittings with High power White LEDs wattage of 3 Watt

and above assembled on single MCPCB, efficiency more

than 130 lm/w and corrosion free High pressure die cast

aluminum housing with smooth finish powder coated and

heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened glass with

company mark/name engraved or embossed 160 to

V,Power Factor more than 0.95, THD < 10 %, CCT

K to 5700K,Uniformity ratio >0.45, Luminaire efficacy>

100 lumens/watt . LED driver efficiency > 85 %.( fittings

required LM-79 & LM-80 certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.)(A) Street Light (IP-

65), Surge protection -4KV integral and ,Light must have

440VAC line supply with over-voltage protection. (ii)

above 48 to 60 WattsCat-lll

175 Supplying and erecting LED street light / Flood light 6.00 Ea. 6088.28

fittings with High power White LEDs wattage of 3 Watt

and above assembled on single MCPCB, efficiency more

than 130 lm/w and corrosion free High pressure die cast

aluminum housing with smooth finish powder coated and

heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened glass with

company mark/name engraved or embossed 160 to

V,Power Factor more than 0.95, THD < 10 %, CCT

K to 5700K,Uniformity ratio >0.45, Luminaire efficacy>

100 lumens/watt . LED driver efficiency > 85 %.( fittings

required LM-79 & LM-80 certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.)(A) Street Light (IP-

65), Surge protection -4KV integral and ,Light must have

440VAC line supply with over-voltage protection. (ii)

above 48 to 60 WattsCat-lll (B) Flood Light (IP-65), Surge

protection -4KV integral and ,Light must have 440VAC line

supply with over-voltage protection. (iii) Above 60 to

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

176 Supplying and erecting LED street light / Flood light 2.00 Ea. 4092.52

fittings with High power White LEDs wattage of 3 Watt

and above assembled on single MCPCB, efficiency more

than 130 lm/w and corrosion free High pressure die cast

aluminum housing with smooth finish powder coated and

heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened glass with

company mark/name engraved or embossed 160 to

V,Power Factor more than 0.95, THD < 10 %, CCT

K to 5700K,Uniformity ratio >0.45, Luminaire efficacy>

100 lumens/watt . LED driver efficiency > 85 %.( fittings

required LM-79 & LM-80 certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.)(A) Street Light (IP-

65), Surge protection -4KV integral and ,Light must have

440VAC line supply with over-voltage protection. (ii)

above 48 to 60 WattsCat-lll (C) Post Top Lantern LED

fitting comprises of finish cast aluminum spigot and spun

aluminum canopy fixed with opal polycarbonate, pipe

arrangement for vertical mounting driver and accessories

wired upto terminal block.IP 65 (i)20- 30W Cat-lll

177 Pproviding and erecting Approved make Four pole moulded 3.00 Ea. 6173.12

case circuit breaker having breaking capacity ICU of

KA. at 415 V,having normal current rating up to 25 A to

100A. with Fixed thermal & magnetic release suitable to

work on A.C. supply 50 c/s. with all internal connections,

spreader tinned copper & complete erected in existing

G.M.S. housing. ICS=100% of ICU only Cat III

178 Providing and erecting Approved make Four pole moulded 1.00 Ea. 8055.76

case circuit breaker having breaking capacity ICU of

KA. at 415 V. having normal current rating 125A. with

Fixed thermal & magnetic release suitable to work on

A.C.supply 50 c/s. with all internal connections, spreader

tinned copper & complete erected in existing 16 G.M.S.

housing. ICS=100% of ICU only Cat III

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

179 Providing and erecting Approved make Four pole moulded 1.00 Ea. 8861.34

case circuit breaker having breaking capacity ICU of

KA. at 415 V. having normal current rating 125A. with

Fixed thermal & magnetic release suitable to work on

A.C.supply 50 c/s. with all internal connections, spreader

tinned copper & complete erected in existing 16 G.M.S.

housing. ICS=100% of ICU only Cat III Note:-

1 Add Rs. 10% extra for housing/Encloser of MCCB for

Item No 3-4-1 to 3-4-12 (The Enclosures should be used of

same company of MCCBs to be used)

180 Supplying and erecting triple pole & neutral 440V / 500V 2.00 Rn.Mtr. 1961.42

panel mounting Copper Busbars with four equal Nos. of

electrolyte bus having current density not more than

Amp. / sq.mm (Rated current / cross section area) duly

wrapped with colour insulating tape for phase sequence of

following current carrying capacity, erected with necessary

bus bar supports /insulators, main cable socket to each bar,

erected in existing cubical panel with necessary

connections.(A) Suitable for 100 Amp. Capacity

181 Supplying KITKAT pattern porcelain cut-out fuse with base 3.00 Ea. 278.76

of following current capacity erected on existing block

board.(v) 100 A. 500 V.

182 providing and erecting Miniature circuit breaker single pole 15.00 Ea. 270.68

0.5A to 2A system and having breaking capacity 10 KA to

be erected in existing box. confirming to IS 8828/1996 with

ISI Mark Cat.III

183 providing and erecting Miniature circuit breaker single pole 48.00 Ea. 112.11

6A to 25A suitable to operate on 240 V A.C. system and

having breaking capacity 10 KA to be erected in existing

box. confirming to IS 8828/1996 with ISI Mark Cat.III

184 Providing & erecting 415 V MCB Four Pole for Motor & 6.00 Ea. 737.30

Inductive Load (C Curve) having 10KA breaking capacity

& confirms to IS :8828 in existing box having following

capacity (c)63 Amp. Cat.III

185 Providing and erecting Sheet Steel powder coated MCB 2.00 Ea. 3412.79

distribution board - flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN rail, Conforms to IS

8623-1 & 3, IEC 61439-1 & 3 without MCB to house

appropriate nos. of MCBs.(The DBs should be used of same

company of MCB to be used) suitable for (B) three phase

incoming and single phase horizontal type outgoing Per

phase isolation type (PPI) (b) sheet steel double door (iii)8

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

186 providing and erecting Approved make RCCBs conforming 8.00 Ea. 2235.13

to IS: 12640 and having sensitivity of 30 mA and Short

Circuit withstand capacity of 10 KA and suitable for

operation on single phase 240 V,50Hz. having characteristic

of quick action & tripping with all advance feature & do not

incorporate any electronic component. for following Max.

rating erected as directed (ii) 40Amps. DP Cat.III

187 Providing and erecting Pipe type earthing having 150 9.00 Ea. 368.65

cms.long and 2.5 cms. dia. galvanised iron pipe with

coupling and buch buried in specially prepared earth pit

complete with necessary 8 SWG earth wire.

188 For using salt and charcoal / coke as required for pipe type 9.00 Ea. 171.70

189 Providing and erecting Annealed bare Copper wire 8 to 16 10.00 Kg. 794.87

190 Supplying & erecting earth pit of minimum bore dia.150mm 3.00 Ea. 4591.46

size approved make Earthing Electrode consisting Pipe-in-

Pipe Technology as per IS 3043-1987 made of corrosion

free hot dipped G.I.Pipes having Outer pipe dia of 50mm

having 80-200 Micron galvanising, Inner pipe dia of 25 mm

having 200-250 Micron galvanising, connection terminal

dia of 12mm with constant ohmic value surrounded by

highly conductive compound with high charge dissipation

suitable for following type of applications with chamber

and heavy duty cover. (A)(approved make OEM has to

submit test certificate including value of earth resistance of

installation duly stamped and signed by agency and officer

Incharge has to ensure the value of earthing resistane

mentioned in test Certificate) & having back filling

compound of (B) Inner chemical (CCM Compound)-

Resistivity:- 0.2 ohm / meter testing as per IEC 62561-2017,

Voltage drop:- < 1 volt at no load & dry form, Sulphar

content:- <2%(C) Back fill Compound :- Earthing

compound should be capable to retain moisture for long

time Necessary test report must be submitted by Agency.

(a) For Electrical Installation up to 440V in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

191 Providing & erecting weather proof, dust & vermin proof, 1.80 Sq.Mtr. 10468.65

floor mounted front operated indoor type cubical panel

board necessary IP-42 and above protection as per approval

from engineer incharge made from 14 SWG thick CRC

M.S. sheet for outer body & doors, 16 SWG thick CRC

M.S.sheet for internal partitions with necessary accesories

supporting angles/ flats channel including cutting,

bending, drilling, welding, riveting with internal partitions

& cable alley as per requirements & instruction of engineer-

in-charge with erection of supplied switch gears,

BUSBARS, suitable size of inter connecting PVC copper

wire / copper-aluminium strips, rubber grommets, rib,

bakelite control fuses/MCB for measuring instruments,

earth bus & earth bolts, foundation flange - bolts-base

Plates, sufficient nos. of hinged doors, handles with locking

arrangement and rubber gasket,heavy duty end terminal

connection,danger notice board,necessary

ventilation,earthing strip complete. The Panel shall be

painted with epoxy powder coating. (The rates excludes the

cost of switchgears, bus bars, inter connecting mains &

Copper Aluminium strips, meters, Fuses etc. The

dimension shall be measured excluding base beams) The

panel shall be supplied with following approved

manufacturers with following size.(A) locally fabricated

panel board (i) with 350 mm depth

192 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured 300.00 Mtr. 183.82

cable multistrand Aluminium conductor for 1.1 KV. to be

laid on wall with necessary clamps or in existing trench /

pipe of following size of cables (A) 3 1/2 core 25 Sq. mm (

16 Sq. mm 1/2 core)

194 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured 110.00 Mtr. 126.25

cable multistrand / Solid Aluminium conductor for 1.1 KV.

to be laid on wall with necessary clamps or in existing

trench / pipe of following size of cables (B) 4 core 6 Sq.

195 Making trench in soft soil of suitable width of 90 cm deep 320.00 Mtr. 55.55

for laying cable or locating the fault all over the run and

back filling the same and making the surface as normal

196 Making trench in Hard Murrum / Tar Road of suitable 20.00 Mtr. 74.74

width of 90 cm or required depth for laying any size of

cable or locating the fault all over the run and back filling

the same and making the surface as normal ground.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

197 Making trench in Hard Murrum / Tar Road of suitable 10.00 Mtr. 357.54

width of 90 cm or required depth for laying any size of

cable or locating the fault all over the run and back filling

the same and making the surface as normal ground. (B) If

additional machinery like hammer driller or JCB use [Add]

198 Drilling the road without breaking the road surface 10.00 Mtr. 492.88

(Asphalt) for laying of cable for feeding power supply by

making up to following size of holes at both ends complete.

(A) Up to 100 mm bore dia

199 Providing & laying approved make Double walled 380.00 Mtr. 62.62

corrugated pipes (DWC) of polyethylene(conforming to IS

14930 II )with necessary connecting accessories of same

material at required depth in existing trench for laying of

cable. below ground / road surface for enclosing cable

(A)50 mm outer dia

200 Providing & laying approved make ISI marked Rigid PVC 20.00 Mtr. 171.70

pipe having 6Kg / cm2 (Class-3) to be erected at road

crossing on or floor as directed for laying of cable. The

pipes as following size of dia & weight per 6 mtr.(E)

mm inner Dia (8.0 Kg / 6RMT)

201 Providing and, fixing heavy duty flange type brass cable 12.00 Ea. 38.38

gland with rubber ring for PVC insulated armoured cable

complete with out going tails, insulating tape etc for

following size of cables.(B) 2 to 4 core 6 Sq. mm

202 Providing and, fixing heavy duty flange type brass double 2.00 Ea. 66.66

compression type cable gland with rubber ring for PVC

insulated armoured cable complete with out going tails,

insulating tape etc for following size of cables.(A) 3 & 1/2 /

4 core 25 Sq. mm

203 Providing and, fixing heavy duty flange type brass double 2.00 Ea. 75.75

compression type cable gland with rubber ring for PVC

insulated armoured cable complete with out going tails,

insulating tape etc for following size of cables.(A) 3 & 1/2 /

4 core 25 Sq. mm (B) 3 & 1/2 core 35/50 Sq. mm

204 Solder less crimping type Aluminium lugs conforming to IS 48.00 Ea. 6.06

suitable for cable of following size evenly crimped with

high pressure tool & connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved manner.(A)

205 Solder less crimping type Aluminium lugs conforming to IS 8.00 Ea. 15.15

suitable for cable of following size evenly crimped with

high pressure tool & connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved manner.(A)

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

206 Solder less crimping type Aluminium lugs conforming to IS 8.00 Ea. 20.20

suitable for cable of following size evenly crimped with

high pressure tool & connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved manner.(A)

207 Providing & erecting Approved make Power Saving 50 23.00 Ea. 1948.29

Watt Ceiling Fan with double ball bearing ISI mark with

Condenser 230 volt A.C. 50 Hz 1200 mm sweep complete

having 3blades with aluminium blades with , canopy &

cm. down rod erected with earthing.(Make shall be

approved by Engineer in charge))

208 Supplying and erecting 19 / 20 mm. nominal bore Medium 23.00 Mtr. 108.07

Class M.S. Pipe down rod erected duly painted for fan

complete with proper insulation without leakage and

209 Supplying & erecting fan hook box of 10 mm M.S. round 23.00 Ea. 108.07

bar bounded to the RCC bars up to 50mm length each side

and pierced through a 16 Gauge M.S. box / Heavy Duty

PVC box complete erected concealed in Ceiling with

necessary finishing.

210 Providing 2.5mm.thick laminated acrylic sheet to cover the 23.00 Ea. 18.18

fan hook or Fan box.

211 Supplying & erecting approved make low noise decorative 8.00 Ea. 1366.53

exhaust fan having square frame ABS body with inbuilt

lowers & square frame.250mm with 1350 RPM Cat.II

212 Supplying & erecting Galvanized M.S pipe post “B” class 9.00 Ea. 4440.97

88.9 mm O.D 6 mtr. Long duly painted with two coats of

aluminium paint complete with metallic base- plate of

mm x 300 mm x 4mm thick for using as a compound light

pole with approx. weight 47 Kg.

213 Supplying & erecting approved make SMC press moulded 9.00 Ea. 1122.11

composite FRP. loop-in, loop-out approx. 2mm thick box

complete with Bakelite connector strip 5way(3P+N+E),DIN

rail for mounting mob & hinged doors as per requirement

having locking arrangements with mounting clamp with

nuts, bolts & washers suitable for erection on pole with

cable clamps& earth bolt of following size of box.(G)

250mm x 220mm x 135mm [deep]

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

214 Supplying & erecting approved make SMC press moulded 6.00 Ea. 476.72

composite FRP. loop-in, loop-out approx. 2mm thick box

complete with Bakelite connector strip 5way(3P+N+E),DIN

rail for mounting mob & hinged doors as per requirement

having locking arrangements with mounting clamp with

nuts, bolts & washers suitable for erection on pole with

cable clamps& earth bolt of following size of box.(G)

250mm x 220mm x 135mm [deep] (C)150mm x 125mm x

215 Providing and erecting street light pole bracket comprising 5.00 Ea. 561.56

main B Class MS pipe of 4.2 cm/require outside dia.

complete with suitable B Class M.S. sleeve tubing of

approx. 45cms.length and suitable for 76.5 mm / 80mm. /

require size pole top having sufficient fasteners for fixing

the brackets and having spread of 1 mtr. length with suitable

rise as per site condition & suitable welded stiffener reducer

and nipple with check nut complete painted with one coat of

Red oxide / PU base primer and two coats of Aluminium /

PU paint. paint with following nos of arms.[A] Single Arm

216 Providing and erecting street light pole bracket comprising 4.00 Ea. 758.51

main B Class MS pipe of 4.2 cm/require outside dia.

complete with suitable B Class M.S. sleeve tubing of

approx. 45cms.length and suitable for 76.5 mm / 80mm. /

require size pole top having sufficient fasteners for fixing

the brackets and having spread of 1 mtr. length with suitable

rise as per site condition & suitable welded stiffener reducer

and nipple with check nut complete painted with one coat of

Red oxide / PU base primer and two coats of Aluminium /

PU paint. paint with following nos of arms.[A] Single Arm

bracket 1 Mtr [B] Double Arm Bracket 1 Mtr

217 Providing 1:2:4 cement concrete foundation & 70 % PCC 9.00 Ea. 809.01

from bottom including excavation for the pole of size 45 x

45 x 100 cm. Deep in below ground level with plinth of

cm x 45 cm (or 45 cm dia x 45 cm) high upper ground level

with necessary curing and finishing in approved manner.

( for 4 & 6 mtr pole)

218 Supplying and erecting B class Galvanized iron pipe having 18.00 Mtr. 180.79

smooth finished bore of the pipe on both ends erected nuts

and bolts along the pole / wall shaping the pipe as per site

requirement. Pipe dia as following. (A) 25 mm dia

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

219 Supplying and erecting B class galvanised iron pipe 32 mm 6.00 Ea. 343.40

outside dia 45 cm long duly welded on 20 cm x 20 cm x

mm thick M.S. base plate, erected on wall or corner for

mounting street light luminaire with necessary hardware

materials duly painted.

220 Supplying & erecting IP 55 grade following size section 1.00 Ea. 16691.26

pillar fabricated from joint less M.S. Sheet with angle iron

legs made from jointless M.S. Angle with cable clamps to

be buried in ground to have appropriate erection to work

uniform until erected with cement concrete foundation and

45 cm high bricks work finishing with plaster etc. hinged

double door internally supported on both side, with internal

and outside looking arrangement with look and keys in

duplicate 35 x 35 x 5 mm M.S. Angle of Two Nos. one is

welded and other with nut and bolt for erecting Bakelite

sheet. Painting the Section Pillar inside and out side with

three tank powder coated paint. section pillar roof should

be without joint with water leakage proof & tested as per IP

55 test & followed by IS 2147 of 1962 (A) 150 X 90 X

cm section pillar fabricated from 14 Gauge MS Sheet with

angle iron legs 95 cm long made from 40 X 40 X 6 mm

thick MS angle.

221 Supplying and erecting HYLAM sheet on existing angle 0.68 Sq.Mtr. 771.64

iron frame.for following thickness (B) 4mm

222 Supplying & erecting approved make Digital time switch 1.00 Ea. 3168.37

having lithium cell 6 years operative and operate battery

backup 1 channel day clock with 14 memory programme,

suitable to operate on 240V + 5%, 16A with, floating

contacts Minimum switching setup time 1 minimum &

LCD display. Also comprised permanent ON/OFF

switching. Programming switches & housed in fire proof

thermoplastic enclosure & transparent cover erected as

required with necessary connection erected as directed.

223 Supplying & erecting power contactor ,AC3 duty for time 1.00 Ea. 2782.55

switch complete erected as per direction Cat III (D) 4 pole

224 Supplying and erecting approved make panel mounting type 2.00 Ea. 1275.63

Digital Voltmeter having 3 digits LED display, 0 to

AC Volts range erected on existing panel board with all

connection, wiring etc .with manufacturers calibration

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

225 Supplying and erecting approved make panel mounting type 2.00 Ea. 1558.43

Digital Ammeter having 3 digits LED display, external

CT operated, calibrated for 0 to 1000 Amps suitable to

operate on 500 Volt AC , erected on existing panel board

with all connection, wiring etc .with manufacturers

calibration certificate.

226 Supplying and erecting Ammeter / Voltmeter selector 4.00 Ea. 317.14

switch for 3 phase AC Supply 500 V on existing panel

board with necessary connections.

227 Providing & erecting L.T. Current Transformer with bar 6.00 Ea. 274.72

primary 50/5 to 1000/5 ratio 15 VA burden erected in

existing CRCA box duly secured with insulating materials

connected to the meter

228 Supplying and erecting approved make suitable panel 6.00 Ea. 43.43

indicator LED type lamp, lens cover, complete erected with

necessary connections.

229 Providing & erecting open well horizontal mono block 2.00 Ea. 25987.30

pump set with cast iron body, complete for three phase

submersible motor having [E] For 7.5 HP 3 phase open well

horizontal mono block pump set suitable for 1550 LPM to

370 LPM @ 13.5 Mtr to 42 Mtr head suitable for 65/75 mm

dia delivery pipe

230 Supplying & erecting approved make 3 phase motor control 2.00 Ea. 12993.65

cubical panel ( Star - Delta) made from16 G. CRCA sheet

duly painted with epoxy powder painted inside and outside

with hinged doors and locking arrangement, consisting of

suitable size of ON- OFF isolator (AC - 3/23 duty) main

fuses, single phasing preventer cum water level. Guard

(Complete unit), Toggle switch to by pass Single phase

preventer cum WLG, indicating lamps for R- Y- B phases,

over load relay, Automatic water level controller, Ammeter

& Voltmeter each with two way selector switch incoming

wires duly socket Crimped, Panel to be erected on angle

iron frame grouted on wall as directed. Star Delta & main

contactor, overload relay, thermal / Electronic Star delta

cutoff timer, start - stop push buttons. The isolator overload

relay & contactors of L& T, Siemens or Cuttler Hamer

make only. Panel to be erected on angle iron frame ground

on wall. (A) S/D up to 7.5 H.P.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

231 Lowering of submersible motor pump set at the depth of 2.00 Per Job 1284.72

following ,complete with required. Nos. and size of casing

pipes erected by means of proper chain pulley block & pipe

wrenches after checking of threads of each pipe with

coupling to take the load of the pump set and pipe assembly

filled up with water (D)For Open well Horizontal

submersible pump set for sump well (ii) 7.5HP to 15 HP

232 Providing and erecting ISI marked PVC insulated PVC 50.00 Mtr. 172.71

Sheathed Flat flexible Submersible copper cable approved

make of following Size. (D) 3 Core x 6 Sq. mm.

233 Supply of following size of TOP & BOTTOM accessories 2.00 Per Set 1900.82

i.e. Adaptor set (CI) long, pump guard set, starter pipe

Rubber ring for submersible pump & UPVC column pipe

as directed by Engineer - in - charge with necessary

plumbing as desired. [E] 65 mm dia

234 Supplying of following size of HEAVY UPVC column 50.00 RMT. 493.89

pipe with coupler and wire lock [C] 65 mm dia

235 Supplying and erecting ISI marked sluice valve at position 2.00 Ea. 1558.43

with necessary material for following size of pipe

diameter.(E) 65 mm(2.5")

236 Supplying, & erecting C.I. swing, check type non-return 2.00 Ea. 1489.75

(Reflux) Valve -ISI marked suitable for following size (B)

Total Cost of Construction Cost

I/We am/are willing to carry out the work at ………………………………………………..% above/below (percent

should be written in figures and words) of the estimated rates mentioned above. Amount of my/our tender works out

*Estimated amount *Estimated amount

Put to tender Rs…19939810.18 Put to tender Rs.19939810.18

Deduct ……. % below Rs……………………..…. Add ……. % Avove Rs…………..…

Net Rs. …………………….… Total Rs. ………….…

The Contractor shall exhibit a board with detailed specification and details of work as directed by

the Engineer-In-Charge for which no extra payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done

3 GST and Income tax TDS will be deducted at a source while making payments of bills.

In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt.G.R.: PRC-

10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there

4 is a change as per actual mix design the cost of difference of cement consumption have been deducted from

the rate of original item at the rate of input rate mentioned in all the tender.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

5 Dismentalling of Credit materials amounting of Rs. -0.00 must be recovered from Contractor's respective R.A.

Deputy Executive Engineer Executive Engineer

R&B Sub Division R&B Division