NIe-T- 10/2026-27(Sl-04)

Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material (Reference to MORT&H's specification 304).Manual Means -Depth upto 3 m

Construction of Subgrade and Earthen Shoulders Construction of sub-grade and earthen shoulders with approved material obtained fromborrow pits with all lifts & leads, transporting to site, spreading, grading to required slope andcompacted tomeet requirement of table No. 300-2 (Reference to MoRT&H's specification clause 305).

By Mix in Place Method Construction of granular sub-base by providing graded materials such as natural sand/crushed gravel/crushed stone/combination depending upon the required grading , spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator and compacting with vibratory roller to achieveat least 98%of themaximum dry density for the material determined as per IS:2720 (Part 8), complete as per clause 401 desired density, complete as per clause 401 ii) Rate per cum for grading-II Material

Water Bound Macadam Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniformthickness, hand packing, rollingwith3wheeledsteel/ vibratory roller 8-10 tonnes in stages topropergradeandcamber,applying and brooming requisite type of screening/bindingMaterials tofillup the interstices of coarse aggregate, watering and compacting to the required density (Reference to MoRT&H's specification 404). By Manual Means Grading-1(Table 400-9) Using Screening (Table 400-10) Type-A (13.2 mm aggregate)

Water Bound Macadam Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniformthickness, hand packing, rollingwith3wheeledsteel/ vibratory roller 8-10 tonnes in stages topropergradeandcamber,applying and brooming requisite type of screening/bindingMaterials tofillup the interstices of coarse aggregate, watering and compacting to the required density (Reference to MoRT&H's specification 404). By Manual Means Grading-2 (Table 400-9) (ii)(b) Using Screening (Table 400-10) Type-B (11.2 mm aggregate)

Supplying and Laying in the particular pattern of cement concrete block pavements with BIS certification and spacer nib of size and shape with aspect ratio as per IS 15658 with cement concrete grade not less than M40 on the prepared base course of specified CBR as mentioned in design and drawing with a cushion of bedding sand of 30 to 50 mm thick (grading of the bedding sand as per clause 6.5.1 of IRC SP-63) and filling up the gaps between two paver block with joint filling sand (the grading of the joint filling sand will be as per clause 6.5.2) complete as per IRC SP - 63 with proper confinement of bedding and joint filling sand, compaction,levelling and filling up of the edge gaps with mortar. Type I, II,III, IV should be as per design requeirment or instruction of E-I-C. c) Type - III (80 mm thickness) inter locking system

Plain/Reinforced cement concrete in open foundation complete all including vibrating and compacting, finishing, curing, sampling, testing etc. as per drawing and Technical Specifications (Reference to MORT&H'sspecifications1500,1700& 2200). PCC Grade M20

Providing and construction of a gabian structure for retaining earth with segments of wire crate sof size7mx3m x 0.6m( 7.50mx 3.0mx0.6m) each divided into 1.5 m compartments by cross netting, made from 4 mm galvanisedsteelwire@32kgper10sqm havingminimumtensile strengthof 300 Mpa ( tensile strength 300-450 Mpa ) conforming to IS:280 and galvanizing coating conforming to IS:4826, woven intomeshwithdouble twist,mesh size notexceeding100x100mm, filledwith boulders with least dimension of 200 mm,all looseendstobetiedwith4mm galvanised steel wire (Reference to MORT&H's specification 2503.3).

Close Bamboo Walling made of 65mm to 75mm dia. bamboos (in single line) driven about half-length into the ground side by side, with stout stays at an interval of 1m, 3nos. of half split bamboo runner of same dia fitted and fixed with nails etc. complete as per direction. (Measurement to be taken along the length of piling after finishing the works). (iii) With bamboos of length above 2.50m and upto 3.00m

Filling empty Cement bags with dry earth or sand, stitching the bag (cost of thread included) and carrying and placing them in position and all incidental charges complete including cost of sand and gunny bags. .