PW1/37379/21-22 RKI DVN 49 VARIOUS LANES INTERLOCKING AND DRAIN CONSTRUCTION LAKSHMINADA SOOCHIKKARAN MUKKU

Amount

Drain & Interlocking

12.1.1 : Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material.Ordinary soil - Depth upto 3 m - Manual Means

12.4 : Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days.

12.8.B.1 : Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications PCC Grade M20

12.8.1.C.1 : Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications RCC Grade M20 - Using Concrete Mixer

12.40 : Supply, Fitting and Placing un- coated HYSD bar Reinforcement in Foundation complete as per Drawing and Technical Specifications

2.4.2.A : Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 metres <br> Cement Concrete Grade M-15 & M-20 - By Mechanical Means <br>

2.4.2.B : Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 metres <br> Prestressed / reinforced cement concrete grade M-20 & above - By Mechanical Means<br>

3.15 : Scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified material with in all lifts and lead upto 1000 metres by Mechanical Means <br>

55.25 : Lifting, conveying and fixing the newly casted RCC covering slabs of any thickness on top of drain in position including all labour charges and miscellaneous expenses etc complete

4.2.A.1 : Construction of granular sub-base by providing graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401. <br> Grading-III -For lower sub base - Mix in Place Method<br>

od1067719/2020_2021 : Filling up low lying and water logged area with local material/ quarry muck, spreading&lt;br&gt;in layers , levelling the top at site and consolidation by ramming , etc complete

od1067834/2020_2021 : :Filling with contractor own earth (excluding rock) in open areas in layers not&lt;br&gt;exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering , lead up to 50 m&lt;br&gt;and lift up to 1.5 m as per direction of site Engineer-in-charge

55.23 : Supplying and laying interlocking tile 80mm or nearest size thickness, minimum strength M30 including providing a layer of 6mm aggregate for 5cm thickness, then laying interlock cobbles in lines and levels as per the directions of the departmental officers at site inclusive of all cost & conveyance charges etc. complete.

od1067735/2020_2021 : supplying and laying interlocking tile 60mm or nearest size thickness minimum&lt;br&gt;strength M30 including providing a layer of 6mm aggregate for 5cm thickness then laying interlock cobbles&lt;br&gt;in lines and levels as per the direction of the departmental officers at site inclusive of all cost and&lt;br&gt;conveyance charges etc complete.

od1061757/2020_2021 : Providing concrete for plain concrete P.C.C grade M20 Nominal mix 1;2:4 using 20mm broken stone - without form work (Wearing coat for culvert, top belt for dry rubble wall, wearing coat for drain etc)

8.5 : Providing and fixing of direction and place identification retro-reflectorised sign with 7 years warranty manufactured as per IRC :67 made of Type IV micro prismatic grade sheeting fixed over aluminium sheeting, 2 mm thick/ aluminium composit material sheeting 4 mm thick with area not exceeding 0.9 sqm, with suitable back supporting frame of MS angle 40x40x6 and supported on GI pipe pole 50mm NB confirming to IS 1239 firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete min size 45 cm x 45 cm x 60 cm, 60 cm below ground level including painting all exposed surface with 2 coats of epoxy painting over epoxy primer and as per approved drawing and clause 801 including lettering symbols etc.

ANI KUMAR A

SUDHEER S

Bidder Name

SUDHEER S

NOUSHAD.S

ANI KUMAR A