RKVY 2019-20 Construction Of Protective Farming Structures and Sales Galleries At District Agricultural Farm Neryamangalam Eranakulam District

Amount

Building construction

15.3 : Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of Engineer -in-Charge.

15.5 : Extra for cutting reinforcement bars manually/ by mechanical means in R.C.C. or R.B. work ( Payment shall be made on the cross sectional area of R.C.C. or R.B work) as per direction of Engineer-in-charge.

2.31 : Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared

2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

60.7.1 : DRY RUBBLE MASONRY _ Dry rubble without concrete levelling course masonry with good quality blasted rubble including packing to compactness to lines and levels cost and conveyance of all materials labour charges etc. complete as per direction of Departmental officers at site

7.1.1 : Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand)

2.25 : Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.

50.2.25.1 : Filling with contractor's own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-charge

4.1.3 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

50.6.1.1 : Solid block masonry using pre cast solid blocks ( factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part 1 of 1979 for foundation and plinth with thickness 20 cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete

13.1.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

13.44.1 : Finishing walls with water proofing cement paint of required shade:New work (Two or more coats applied @ 3.84 kg/10 sqm)

13.46.1 : Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

50.10.2 : Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

50.10.1 : Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

13.52.1 : Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work

50.12.2.4 : Providing & fixing Poly carbonate multi wall plain sheet 6 mm thick as approved by the Engineer in charge and should be supplied in a single length of 12m or as decide by the Engineer in charge. The sheets shall be fixed using self drilling/self tapping screw of size (5.5x55mm) with EPDM seal complete upto any pitch in horizontal/vertical curved surfaces, but excluding the cost of purlins, rafters, trusses, and including cutting to size and shapes where ever required.

od66271/2020_2021 : Providing and fixing Ridge cappings 200mm flaps with zinc alum sheet with fasteners including all materials cost, labour, conveyance etc complete

od70337/2020_2021 : Providing and fixing PVC Rain water Gutter using self drilling/self tapping screws,,clamps,fasteners and down pipe including all materials,costs,labour charges etc complete:<br>Pvc Gutter

od88407/2020_2021 : :Providing and fixing aluminium profile triple spring locking (190grm/mtr) with zig zag spring pvc coated(Double) and self threading screws rigidly fixed on sections by mechanical or manual means etc complete as per the direction of Engineer-in-charge.<br>

od88409/2020_2021 : Providing & fixing 200 micron multi layered UV stabilized light transmission,light diffusion,anti dust,anti drip type roofing sheets as approved by the Engineer in charge . The sheets shall be fixed using self drilling/self tapping screw on aluminium profile & Zigzag spring (Aluminium profile & spring to be paid separately) upto any pitch in horizontal/vertical, curved surfaces, but excluding the cost of purlins, rafters, trusses, and including cutting to size and shapes where ever required etc complete. Details of cost for area of roof. 1x12.5x8=100.00 sqm(with a wastage of 5%, qnty=105m2)

od88410/2020_2021 : Providing and fixing of 105 gsm antivirus net for pest prevention and for ventilation as per direction of Engineer-in-charge.

od88399/2020_2021 : Providing and fixing 8" intermediate joint with down accessories for rain water square gutter

od88401/2020_2021 : Providing and fixing 8" square end down accessories for gutter

od193702/2020_2021 : Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of Stone Aggregate(single size): 06 mm nominal size, filling the joints etc. all complete as per the direction of Engineer-in-charge.

od94626/2020_2021 : Providing and fixing PVC pipes as per direction of Engineer in Charge. 75 mm dia 4 Kgf/cm2

od102645/2020_2021 : Supplying fabricating installing and fixing in position plant stand for placing plant pots with a size of 2mx 0.90m x 1.00m in GI sections (4 no. 40x40mm verticals,Base plate ,Horizontal ties top 40x40 and bottom 25x25mm,cross bars of 40x40 for supporting weld mesh,and top guard rail of 25x25mm ) with top welded wire mesh and applying a priming coat of approved steel primer, including welding and painting with epoxy paint etc. complete as per the drawings and directions of engineer in charge

od192108/2020_2021 : Providing and fixing Rain Water Gutter of HDPE transparent sheet (60 cm width & 1400 micron thick of approved make) with necessary over laps , fasteners including all materials cost, labour, conveyance etc complete

Appendix B-Irrigation system

od102698/2020_2021 : M.S riser rod for sprinkler unit Support, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer & epoxy paint etc complete.

od102699/2020_2021 : Providing and fixing lateral Tee for 16 mm lateral pipe approved quality etc complete.

od102702/2020_2021 : Providing and fixing PVC pipes fittings including fixing the pipe with clamps, jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. 32 mm pipe 6Kgf/cm2

od102703/2020_2021 : Providing and fixing PVC pipe fittings including fixing the pipe with clamps, jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. - 40 mm pipe 6Kgf/cm2

50.18.9.5.2 : Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints compete as per direction of Engineer in Charge. 40 mm dia 6 Kgf/cm2

od88442/2020_2021 : Providing and fixing Micro sprinkler with adapter of 26 ltrs/hr for both poly tube and pvc of approved quality<br>15 mm nominal bore

od88443/2020_2021 : Providing and fixing lateral tap for regulating flow of approved quality

od88445/2020_2021 : Providing and fixing 40mm ball valve (high performance rigid uPVC)of approved quality

od88446/2020_2021 : Providing and fixing Non return valve(high performance rigid PVC) of approved quality

od88449/2020_2021 : Providing and fixing of Polyethylene green shade net/or equivalent of green colour with a light controlling efficiency of 50%/ 35% complete and as per direction of Engineer-in-charge.

od88450/2020_2021 : Providing and fixing 32mm size Ball valve (jain make)of of approved quality

od88451/2020_2021 : Providing and fixing 16mm poly tube end cap to laterals of approved quality.<br>

od88452/2020_2021 : Providing and fixing Gromet take off 16mm size of approved quality.

od88736/2020_2021 : Supplying and installing disc filter of size 1.1/2'' and valve,make of Jain Irrigation including the cost of carriage as specified as per the direction of engineer in charge.

od88738/2020_2021 : Providing and fixing flush valve of approved quality for connecting sub mains.

od102663/2020_2021 : :Providing and fixing poly tough tube( linear low density poly ethylene tube)16mm size ,<br>including fixing the pipe, testing of joints complete as per direction of Engineer-in-Charge<br>

od102708/2020_2021 : Supplying installing and commissioning of pumping - Mono block pump set with allaccessories of having designed discharge and head of designed flow (Pressure head range 30-35meter)including the cost of carriage as specified as per the direction of engineer in charge

18.48 : Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

ccg constructions

CUBIX INFRASTRUCTURES

Bidder Name

ccg constructions

George P O

CUBIX INFRASTRUCTURES