Loading
Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹79.8 Laccepted-finance | ₹79.8 L | accepted-finance |
Tender Value
Refer Docs
EMD Value
₹1.4 L
Closing Date
13 Jan 2026, 10:30 pmClosed
Bengaluru Development Authority
Vasantha.P.R
Arranging Permanent Power supply to extent of 483KW for Residential layout at Sy no 25 & 28, Bhoopasandra Village, R.M.V 2nd stage Further Extension, BDA, Bangalore under Self-Execution Basis.
BDA/2025-26/EL/WORK_INDENT173
BDA/2025-26/EL/WORK_INDENT173
Open
Electrical
Two Tender Document System(Two Cover)
BDA Electrical Division
4 documents required · 0 mandatory · 4 optional
Documentary proof for clause no.3.2 (b) of ITT Tenderer such as Work done, Performance Certificate issued by the end user not below the rank of Executive/Divisional Engineer.
Audited financial statements i.e. Balance Sheets, P&L Statement, Turnover Certificates, IT returns for and Auditors reports of the last five year proceeding the date of bid submission of the bidder duly certified by Chartered Accountant as in clause no.3.2 (a) of ITT.
Bankers Certificate duly signed by authorized person in the prescribed format and as per the clause no.3.3B of ITT (liquid Assets and / of availability of credit facilities).
Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction)
The tenderer should possess required valid Electrical Contractors License issued by the Government of Karnataka.
Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)
Documentary proof for clause no.3.6 of ITT Assessed available tender capacity such as statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent as sought in Note of the said clause in the prescribed format as in clause no.1.4A of Qualification Information.
Self Declaration stating that the information with regard to assessed available tender capacity (Works on Hand) furnished are correct as per the clause no.3.3 of ITT and at clause no.1.4 (a) of Section - 3 - Q I.
List of works for which tenders already submitted
Banker Details for reference
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Reports on the financial standing of the tenderer, such as profit and lossstatements and auditors reports for the last five years
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
List of Financial Resources with Certificates
Self Declaration stating that the works for which tenders already submitted as per the clause no.1.4 (b) of Section - 3 - Q I.
₹2,360
₹1.4 L
13 Jan 2026
31 Dec 2025
14 Jan 2026
1 Jan 2026
1 Jan 2026
Arranging Permanent Power supply to extent of 483KW for Residential layout at Sy no 25 & 28, Bhoopasandra Village, R.M.V 2nd stage Further Extension, BDA, Bangalore under Self-Execution Basis.
Supply of 11 kV, 3 Core, HTUG Cable for insulations High quality clean XLPE compound shall be used (Free from microvoids, Moisture content, ambers and contaminations) with pressure extruded, inner she...
Supply of Heat Shrinkable Straight Through Jointing Kit for XLPE Cable with Copper Lug & Al Ferrule As per BESCOM specification and direction of the engineer in charge of work. 3x95 Sqmm
Supply of Heat Shrinkable Indoor Type Cable Termination Kit for XLPE Cable As per BESCOM specification and direction of the engineer in charge of work. 3x95 Sqmm
Supply of Heat Shrinkable Outdoor Type Cable Termination Kit for XLPE Cable As per BESCOM specification and direction of the engineer in charge of work. 3x95 Sqmm
Supply of GI Pipe 100mm dia for cable raising B-Class As per BESCOM specification and direction of the engineer in charge of work.
Supply & installation of Artificial Sand Manufacture sand. As per BESCOM specification and direction of the engineer in charge of work.
Supply & Fixing of PVC Pipe-100 mm dia. As per BESCOM specification and direction of the engineer in charge of work.
Supply and fixing of Silicon rubber composite insulator 11KV 45KN Polymeric Insulator. As per BESCOM specification and direction of the engineer in charge of work.
Supply of 11KV Speical 3 Pin Cross arm As per BESCOM specification and direction of the engineer in charge of work.
Supply & fixing of H.G Fuse Unit 11KV Class with Solid Core insulators. As per BESCOM specification and direction of the engineer in charge of work. set (3 Nos)
Supply of 11KV 200Amps Single Break Polymeric Type post insulators GOS. As per BESCOM specification and direction of the engineer in charge of work.
Supply and fixing of Three H frame without transformer seating and seating angle support X arm for 11 Mtr long Spun pole for 63 100 250 500 KVA (UG Cable)-GI. As per BESCOM specification and directi...
Supply of Pre-Stressed Tubular Spun pole 11 mtr long. As per BESCOM specification and direction of the engineer in charge of work.
Supply of Conductor of Rabbit ACSR. As per BESCOM specification and direction of the engineer in charge of work.
Laying of HT Cable in Existing Trench GI pipe Stone ware RCC Hume pipe using Wooden Aluminium Rollers as directed by the departmenal staff for 3x95 sqmm to 150 sqmm As per BESCOM specification a...
Labour chargers for Laying of UG Cables by Trenchless Technology by adopting Horizontal Boring & Drawing of cable including preparation at site horizontal drilling with 5 6 inches bore size without H...
Laying of GI pipe 80mm to 150mm dia at Drainage Water Supply crossing inlcuding fixing collars elbows, Bends, Tees and other fitting with cuts and threads wherever necessary complete. As per BESCOM s...
Refilling the Cable trenches with selected avialable earth from trench excavation inlcuding watering consolidation in layers of 15 cm. Thickness including depositing of the surplus earth with a lead ...
Fixing of 11KV Speical 3 Pin Cross arm As per BESCOM specification and direction of the engineer in charge of work.
Making and fixing of Heat shrinkable Straight Through Joint 3x95 to 3x150 Sqmm As per BESCOM specification and direction of the engineer in charge of work.
Making and fixing of Heat shrinkable Type Terminations 3x95 to 3x150 Sqmm As per BESCOM specification and direction of the engineer in charge of work.
Fixing of 11KV 200Amps Single Break Polymeric Type post insulators GOS. As per BESCOM specification and direction of the engineer in charge of work.
Erection of Pre-Stressed Tubular Spun pole 11 mtr long. As per BESCOM specification and direction of the engineer in charge of work.
Supply of 4Way RMU, 2OD + 2VL (One Incomer + Two Breakers + One Outgoing) 630 Amps with Copper Busbar DAS Specification As per BESCOM specification and direction of the engineer in charge of work.
Grouding Materials for RMUs & Transformers,Good Quality well burnt Charcoal for grouding purposes packed in non returnable gunny bags of 30KG each. As per BESCOM specification and direction of the e...
Grouding Materials for RMUs & Transformers,Good Quality salt for grouding purposes packed in 50 kg gunny bags. As per BESCOM specification and direction of the engineer in charge of work.
Grouding Materials for RMUs & GI Grouding pipe B-Class 40 mm dia 2.5 mtrs long, 2.9mm thick with bolts nuts, GI Strips and washers complete. As per BESCOM specification and direction of the engineer ...
Refilling the Cable trenches with selected avialable earth from trench excavation inlcuding watering consolidation in layers of 15 cm. Thickness including depositing of the surplus earth with a lead ...
Refilling the Rmu foundation with the approved new earth with initial leadof 50 Mtr including watering and tamping layers of 15cm thick etc., complete. As per BESCOM specification and direction of th...
Lettering the RMU with enamel paint and also writing single line diagram of each panel, caution Board, Danger Board etc., including cost of Paint, Brush etc., As per BESCOM specification and directio...
Providing chain link fencing 50mm size of 8 guage property strecthed between rectangular poles and fixed with suitable bolts & nuts, the free ends shall be welded to the Pole and block pipe at top and...
Labour charges for Fixing foundation frame of MS channel 100x50 mm and MS angle 40x40x5 mm welding, fixing in concrete, aligning the RMU on foundation bed, assembly of units, connecting Bus Bars from ...
Prefabricated Platform for erection of 250 kVA Transformer on 11 Mtr Spun Pole Structure involving Rectangular hollow Sections 96x48x4.87 Thik and 66x3x4.5 Thik, Circular hollow section of 165.6 OD x ...
Supply and fixing of LT Meterimng Box for housing the ETV Meters without CTs busbar wiring etc, As per BESCOM specification and direction of the engineer in charge of work.
Supply & Making of Epoxy Terminating kit (pothead) suitable for 1.1 kV class LT UG Cables 3.5 x 225 240 300 sq. Mm As per BESCOM specification and direction of the engineer in charge of work.
Supply & fixing of Measuring Equipments- LT Three phase- Wire CT operated DLMS Complaint ETV Meter-5A, Class 0.5a Accuracy As per BESCOM specification and direction of the engineer in charge of work...
Grouding Materials for RMUs & GI Grouding pipe B-Class 40 mm dia 2.5 mtrs long, 2.9mm thick with bolts nuts, GI Strips and washers complete. As per BESCOM specification and direction of the engineer ...
Grouding Materials for RMUs & Transformers,Good Quality salt for grouding purposes packed in 50 kg gunny bags. As per BESCOM specification and direction of the engineer in charge of work.
Supply of LT Distribution Box for 250 kVA DTC with MCCBs (Sheet Metal)(Dwg No. BESCOM GM QS&S 08 Dtd 24.11.2018) As per BESCOM specification and direction of the engineer in charge of work. set (3 No...
Supply of Distribution Transformers-3 Phase, 11kV 433V- Stacked Core with Oil as per IS-1 180 (Part-1) 2014, OPEN BUSHING TYPE 250kVA, Aluminium Wdg, Star 2 (5 Star) As per BESCOM specification and d...
Fixing of LT Distribution Box for 250 kVA DTC with MCCBs (Sheet Metal)(Dwg No. BESCOM GM QS&S 08 Dtd 24.11.2018) As per BESCOM specification and direction of the engineer in charge of work. set (3 No...
Erection of Distribution Transformers-3 Phase, 11kV 433V- Stacked Core with Oil as per IS-1 180 (Part-1) 2014, OPEN BUSHING TYPE 250kVA, Aluminium Wdg, Star 2 (5 Star) As per BESCOM specification and...
Supply of Armoured L.T.UG Cable 1.1kV Class 240Sq.mm, 3.5 Core As per BESCOM specification and direction of the engineer in charge of work.
Supply of LT Feeder Piller box with cutouts 12 way As per BESCOM specification and direction of the engineer in charge of work.
Supply of Armoured L.T.UG Cable 1.1kV Class 25 Sq.mm, 4 Core As per BESCOM specification and direction of the engineer in charge of work.
Supply of Straight Through Jointing Kit Suitable for 1.1 kV Class LTUG Cable as per IS-13573 HS Type 120 to 225 Sqmm As per BESCOM specification and direction of the engineer in charge of work.
Supply and fixinf of PVC Pipe-40 mm dia As per BESCOM specification and direction of the engineer in charge of work.
Supply and fixing of Heavy duty Copper terminals long barrel 185 Sq.mm
Copper terminals As per BESCOM specification and direction of the engineer in charge of work.
Supply of Street light metering box made of SMC As per BESCOM specification and direction of the engineer in charge of work.
Supply and fixing of Epoxy Terminating kit (pothead) suitable for 1.1 kV class LT UG Cables 3.5 x 225 240 300 sq. Mm As per BESCOM specification and direction of the engineer in charge of work.
Supply of LT Feeder Piller box with cutouts 8 way As per BESCOM specification and direction of the engineer in charge of work.
Refilling the cable trenches with selected available earth from trench excavation including watering, consolidation in layers of 15 cm. Thickness inciuding depositing of the surplus earth with a lead ...
Making of Cable Joint and wiring (for LT UG Cable) Heat shrinkable Type Terminations 120 to 240 Sqmm As per BESCOM specification and direction of the engineer in charge of work.
Making of Cable Joint and wiring (for HT & LT UG Cable) Heat shrinkable Straight Through Joint 120 to 240 Sqmm As per BESCOM specification and direction of the engineer in charge of work.
Labour chargers for Laying of UG Cables by Trenchless Technology by adopting Horizontal Boring & Drawing of cable including preparation at site horizontal drilling with 5 6 inches bore size without H...
Fixing of LT Feeder Piller box with cutouts 8 way As per BESCOM specification and direction of the engineer in charge of work.
Laying of LT cable in Existing Trench GI pipe Stone Ware RCC Hume pipe using Wooden luminum Rollers as directed by the departmental staff for 120 to 240 Sqmm As per BESCOM specification and direction...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
KW-3 Bid Document- APS to RMV 2nd stage Boopasandra village.doc
Tender Document • 0.68 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .