NIT NO. 02 ITEM NO. 09

SIC of submersible pump sets with all allied accessories in near LNJP and Takia Kale Khan with following works : S/O DOL submersible pump set fitted with dynamical balanced impeller suitable for 380 to 415Volts AC. Head range : 73-84 Mtr., Discharge range : 250-300 LPM, 2900rpm, 50 Hz, 3 Ph, 7.5 HP. (2 Nos. for installation + 3 Nos. for Standby) Make of Pump: KBL / BS / SU / Great India / any other make approved by DJB.

S/o Fabricated of hut / cubical type electrical LT panel made out MS sheet of 16/18 SWG on angle iron frame of 50x50x6mm having four legs 1000mm high for grouting in floor/earth tentative size of panel 1000mmx1000mmx500mm wide. Panel should have interlocking arrangement and MS sheet dully fixed with nut and bolts for installation of electrical energy meter, Motor protection unit, Starter etc. duly painted with red oxide paint thereafter light grey color and sign of danger on panel.

Supply of Automatic submersible / Monobloc P/Set power controller for up to 10 HP DOL connection with Pump Protection Unit (Programmable Micro Controller Base) in sheet steel enclosure having size 435mm X 540mm X 200mm wide with Wiring 2.5mm/1.5mm/1.0mm or as per requirement. All the accessories should be fitted in seven tank process powder coated CRC sheet cabinet suitable for open area mounting on wall / frame. Digital Micro Controller Pump Protection Unit (Programmable Micro Controller Base) with 3 nos. of CT. Digital Micro Controller Pump Protection Unit having following protection: Make: Arihant / Bcon / Pump Guru / SM / Gain Guard / Hitech / Protech / DJB Approved 1. Unbalance Voltage (Phase Changing) 2. Over Voltage 3. Under Voltage 4. Reverse Phase Voltage 5. Ampere Overload 6. Dry Run (Ampere Under Load) 7. Unbalance Ampere 8. Digital Displays of voltage of three phase (R,Y,B) 9. Digital Displays Current (Ampere) of three phase (R,Y.B) 10. Auto/Manual/Bypass switch MCB 32/63 amp. 4 pole. Make : L&T / Schneider / ABB / Havells 3P, Contactor 16/25 amp with NO & NC for automatic phase reversible protection : 2 Nos. in each unit Make : L&T/ABB/Havells/BCH/Schneider LED (R,Y,B, Contactor 1, Contactor 2): 5 Nos. in each unit. Make: L&T/Havells/ABB/BCH/Schneider Real timer for more than 10 time pump operation in a day. Make: L&T/Havells/ABB/BCH/Schneider/Hager

S/o RCCB 4Pole 63A sensitivity 100mA. Make : L&T / Havells / Standard

S/o 10hp DOL starter in sheet steel encloser with single phase protection feature suitable for 3ph, 415V, AC supply. Make : L&T / Schneider

S/o 4 sqmm 3 Core PVC insulated flat submersible cable suitable for 1100 Volts Copper Conductor (100 Mtr Roll). Make : Havells / Gloster / DJB Approved Make

S/o G.I. pipe 50 mm dia, Medium class with G.I. flange welded in both sides 3 mtrs long with M.S. ' L' type brackets complete with threading work on each side of pipe, each G.I. flange should have 4 holes and 2 cut for cables. Make of Flange : ISI , Make of Pipe : Jindal /Surya/Tata.

S/o Tail piece of size 50 mm dia 500mm long with one end threaded and other having welded flange. Make of Flange – Unik / ISI , Make of Pipe : Jindal /Surya/Tata/ISI

S/O M.S. clamp of 600mm long 12mm thick complete with nut and bolts and washers for holding the 40/50mm dia pipe including bending and shaping etc. as required

S/o GI bend with both ends having welding flange of size 50mm dia. Make of Flange –ISI , Make of Pipe : Jindal /Surya/Tata/ISI

S/o Rubber insertion / Jointing sheet of size 3 mm thick Make : Jyoti/National/ISI

S/o MS full threaded hexagonal nut-bolts size 1/2” x 1½”. Make : ISI mark.

S/o Bore Cover plate made out of 6 mm thick MS Plate having OD 200mm and ID60 mm in two pieces with bolting arrangement.

S/o 3 Mtr 80MM G.I. pipe medium class double flanged for holding electric cable. Make : Jindal / Tata / Surya / ISI

Installation of electric panel including digging and fixing the same with the help of CC and testing the same after installation of electric meter on No load and ON load full satisfaction of Engineer-in-charge. ( Electric connection will be provided by the department )

Installation & commissioning of bore wells by using above equipment's duly connected with LT Panel and delivery line complete i/c lowering of pump set with the help of chain pulley block, Tripod, Tools and tackles, watch and ward of material, cartage etc. Taking all safety measures as per standard and full satisfaction of Engineer-in-Charge.

Pranav Sales and Projects (India) Pvt. Ltd.

Shakti Trading Co.

Swarn Engineers