Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.4 LAccepted-AOC | ₹1.4 L Quoted ₹1.5 L | L1 | Accepted-AOC AOC |
| 2 | L2₹1.5 L+₹1,617 (1.10%)Rejected-Finance | ₹1.5 L+₹1,617 (1.10%) | L2 | Rejected-Finance L2 |
| Sl No | Description | Qty | Unit | MUKESH SHARMA L1 | Lochan Sharma L2 |
|---|---|---|---|---|---|
| 1.00 | Excavation in foundation and trenches (For pipes and pits) up to all depths and in all classification of each work such as pick work, jumper work, saturated soil including bailing or pumping out of water, blasting soft or hard rock or chiselling or wedging out of soft/ hard rock, where blasting is prohibited, in all lifts including trimming and dressing of sides, levelling of beds to correct grade including shoring, strutting, planking, timbering and dewatering where ever required. Stacking usable and unusable material/ soil separately and after laying, jointing and testing of pipes, returning the usable soil in 15cm layers by ramming and watering and then disposing of all surplus excavated soil/ unusable material as directed within all leads/ lifts including restoration of unmetalled surfaces to its original condition and including cost of diversion for traffic, night signal boards, fixing caution boards, crossing over trenches for access to houses, fencing etc. complete in all respect with in all leads and lifts as per direction of Engineer-in-Charge. Pick & Jumper work (For pits) | 90 | Cum | 390 ₹35,100 Lowest | 400 ₹36,000 |
| 2.00Spot welding of G.I.Pipe of following dia pipe of the exisiting scheme including cutting. welding, alignining etc complete in all respect including testing. The welding electrodes shall be as per IS 814 of Advani Oerlikon/ L&T or ISI marked make. The rates also includes entire carriage of material, flushing, cleaning & hydraulic testing complete to the best satisfaction & direction of Engineer in charge with in all leads and lifts. | |||||
| 2.01 | 50 mm dia | 42 | Joints. | 660 ₹27,720 Lowest | 665 ₹27,930 |
| 2.02 | 65 mm dia | 24 | Joints. | 725 ₹17,400 Lowest | 728 ₹17,472 |
| 2.03 | 80 mm dia | 25 | Joints. | 870 ₹21,750 Lowest | 875 ₹21,875 |
| 2.04 | 100 mm dia | 22 | Joints. | 1,020 ₹22,440 Lowest | 1,025 ₹22,550 |
| 2.05 | 125 mm dia | 20 | Joints. | 1,150 ₹23,000 Lowest | 1,160 ₹23,200 |
Tender Value
₹1.5 L
EMD Value
₹3,088
Closing Date
24 Apr 2026, 5:00 pmClosed
E.E. JSV Division Anni
Jal Shakti Division Anni
Spot welding of G.I. pipe 125 mm dia, 100 mm dia, 80 mm dia, 65 mm dia and 50 mm dia at various points
2026_HPIPH_134563_1
676-716 dated 17.04.2026
Open Tender
Civil Works
Item Rate
120 days
Nirmand
Please refer Tender documents.
8 documents required · 8 mandatory
₹350
₹3,088
12 May 2026
18 Apr 2026
25 Apr 2026
18 Apr 2026
24 Apr 2026
18 Apr 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Excavation in foundation and trenches (For pipes and pits) up to all depths and in all classification of each work such as pick work, jumper work, saturated soil including bailing or pumping out of water, blasting soft or hard rock or chiselling or wedging out of soft/ hard rock, where blasting is prohibited, in all lifts including trimming and dressing of sides, levelling of beds to correct grade including shoring, strutting, planking, timbering and dewatering where ever required. Stacking usable and unusable material/ soil separately and after laying, jointing and testing of pipes, returning the usable soil in 15cm layers by ramming and watering and then disposing of all surplus excavated soil/ unusable material as directed within all leads/ lifts including restoration of unmetalled surfaces to its original condition and including cost of diversion for traffic, night signal boards, fixing caution boards, crossing over trenches for access to houses, fencing etc. complete in all respect with in all leads and lifts as per direction of Engineer-in-Charge. Pick & Jumper work (For pits) | |||||
| 2Spot welding of G.I.Pipe of following dia pipe of the exisiting scheme including cutting. welding, alignining etc complete in all respect including testing. The welding electrodes shall be as per IS 814 of Advani Oerlikon/ L&T or ISI marked make. The rates also includes entire carriage of material, flushing, cleaning & hydraulic testing complete to the best satisfaction & direction of Engineer in charge with in all leads and lifts. | |||||
| 2.01 | 50 mm dia | - | Joints. | - | - |
| 2.02 | 65 mm dia | - | Joints. | - | - |
| 2.03 | 80 mm dia | - | Joints. | - | - |
| 2.04 | 100 mm dia | - | Joints. | - | - |
| 2.05 | 125 mm dia | - | Joints. | - | - |
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 3.22 MB
form6.pdf
Tender Documents • 0.37 MB
BOQ_199148.xls
BOQ • 0.34 MB
terms.pdf
Tender Documents • 0.44 MB
form8.pdf
Tender Documents • 1.26 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .