WBMAD/NDITA/96/2025-26/SL-01

Inspection of street light installation on steel tubular poles (11 Mtr.) and High Masts (16 Mtr.) every day, provided with skilled and semi skilled electricians (one for 1 PM to 9.30 PM every day/ night and another for 2 PM to 9 PM & 06.00 AM to 7.30 AM for assisting skilled electrician,including submission of record to the department/EIC, on the next working day as per prescribed format and as per direction of the EIC. i) Streel tubular poles (11 Mtr.) - 360 Nos ii)High Masts (16 Mtr.) - 6 Nos Total 366 nos. point for 365 days = 133590 Point

SUPPLYING OF FOLLOWING XLPE INSULATED ALUMINUM CONDUCTOR ARMORED CABLES OF 1.1KV GRADE AS PER IS 7098 (PART 1) 1988 Size: 16 sqm 4 core 40 mtr./span X 24 span As per enclosed Rate Analysis

Laying of one No. cable upto 35 Sqmm. In underground trench 460mm wide x 760mm average depth. With brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, levelling up and restoring surface duly rammed.

Supplying and drawing 1.1KV Single Core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necessary connection as required from terminal box at Bottom end to the respective LED fittings. i) 3 x 22/0.3(1.5 sqmm.) 30 mtr. for each pole X 120 poles

ii) 4 x 80/0.4 (16 Sqmm.) 4 mtr for each Feeder x 21 feeder

Finishing of the PVC insulated wire ends by socketing with pin/ring type coper sockets and insulated tapes etc. including supplying sockets tapes of size 2.5 sqmm. & 16 Sqmm (i) 2.5 sqmm

ii) 16 sqmm.

Supplying & Bakelite Sheet, 3mm thick 1296 Sq.inch/Feeder X 6 Feeders

Supply and fixing of fuse unit complete with base and bridge on existing Board and necessary connection, for the range of 63 Amps 415V.

Painting of steel tubular pole of lengths and no. of coats of paint, as given below with ready mixed paint/primer of approved make, and brand including preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint upto 9.0 Mtr. long Pole i) One coat of red lead/Zinc chromate priming

ii) 1st Coat of synthetic enamel paint over the primer.

iii) 2nd coat of synthetic enamel paint over the 1st coat.

Painting Block letters or digits within a circle/square as required, with "Black Japan" paint of approved make & brand, the size of letters and digits as given below. Size 50mm and upto 75mm

Supplying and fixing 240/415V MCB of Breaking Capacity 10KA & C characteristics on din rail of existing DBs and necessary connection. A) 10A (SP) Make: Legrand/Seimens /Schneider.

B) 32A (Four Pole) Make: Legrand/Seimens /Schneider.

Supplying Al.conductor PVC insulated and sheathed unarmored cable (1.1KVgrade) of size 16 Sqmm, 4 Core. Make: Gloster/Havells/Polycab 50mtr/Span X 6 Span

Daily attending of lighting installations, restoring of fault, disconnection/reconnection of live line, as and where basis for street lighting with 11 Mtr long steel tubular poles and 16 Mtr long High Masts including rising/lowering of flood lighting arrangement fitted at the top of the High Masts for checking/testing and fixing of luminaries etc. to be carried out manually/or motorised Gear/Pully arrangement provided with 01 (one) head of Semi Skilled electrician and 02 (two) heads of unskilled electricians those have gathered considerable knowledge for street lighting network with street poles and high Masts (they will be engaged from 1 PM to 9.30 PM everyday) and to be reported with concerned Work Asst/Officials of NDITA for proper monitoring, ON/OFF in time and quick restoration of the fault. i) Semi Skilled Electrician : 01 (one)

ii) Unskilled Electrician : 02 (two)

Add GST@18% on Sl. No. 1 to 39.2

Add labour cess @1% on Sl. No. 1 to 41