Construction of Nagarpalika Library at Viramgam, Dist. Ahmedabad (Second Attempt)

Description of Item Unit Total Amount

No. Or Less Rate In FIghure

Clearing and grubbing road land including uprooting rank

vegetation grass bushes,shrubs,sapling and trees girth up to

mm removal of stumps of trees cut earlier and disposal of

unserviceable materials (C) By mechanical means in area of light

Excavation for foundation for depth from up to 1.5 M. m

including sorting out and stacking of useful materials and

disposing off the excavated stuff up to 50 Meter lead.(B)

Dense & Hard Soil, etc. complete as per detailed & directed by EIC.

Excavation for foundation for depth from 1.5 m to 3.0 m

including sorting out and stacking of useful materials and

disposing off the excavated stuff up to 50 Meter lead.(C)

Hard Murrum, etc. complete as per detailed & directed by EIC.

Filling in plinth and foundation with sand under floors including

4 watering ramming, consolidating and dressing complete Cmt 57.00 460.19

layers of 20cm. thickness including watering, ramming and

5 consolidating etc. complete. (more than 10 ton) Cmt 669.00 289.06

Filling available excavated earth (excluding rock) in

trenches. plinth, sides of foundations etc. in layers not exceeding

6 20 cm. in depth consolidating each disposited layer by Cmt 805.00 130.39

ramming and watering.

Providing and filling rubbles including hand packing and filling

7 interstices with sand complete as directed by EIC. Cmt 1.00 1,064.80

Carring out plinth treatment to post construction / existing

structure by spraying chemical solution for termite control

treatment including labour and material consistent with I.S.I

specification. Using Chlordane and Chiorpurfiles 20 EC. As Per

6131_paret-II Concentration Weight one percent is recommended

8 i.e one liter 20 EC chemical emulsion with 19 liter give 1 % Smt. 304.00 105.95

concentration inclusive of one liter chemical emulsion application at

the rate of 5 Liter chemical/ Sqm of surface is recommended as

Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse

sand : 4- graded stone aggregates 20 mm nominal size) and curing

9 complete excluding cost of formwork in (A) Foundation and Plinth Cmt 164.00 3,697.91

GRADE SLAB (M200) : Providing and laying controlled cement

concrete M.200 Concrete with all lead, including all transportation,

pumping, pouring, curing of concrete etc complete including the

10 cost of formwork but excluding the cost of reinforcement for Cmt. 35.00 4,900.07

reinforced concrete work in M200 Grade Slab

Sr. Qty. May More Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. Or Less Rate In FIghure

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting with

vibrator curing centering & shuttering in true line and level etc, but

excluding the cost of reinforcement for RCC work in Foundations

footings, base of columns and Raft etc., for any type of cross

section area complete as directed by E. I. C.

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting with

vibrator curing centering & shuttering in true line and level etc, but

excluding the cost of reinforcement for RCC work in column up to

plinth lvl. etc., for any type of cross section area complete as

directed by E. I. C.

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting with

vibrator curing centering & shuttering in true line and level etc, but

excluding the cost of reinforcement for RCC work in TIE, GROUND,

& PLINTH BEAMS for any type of cross sectional area. etc., complete

as directed by E. I. C.

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting with

vibrator curing centering & shuttering in true line and level etc, but

excluding the cost of reinforcement for RCC work in (F) Wall

14 (Vertical and horizontal fins)., & (F1) Wall cap & coping up to G.F. Cmt. 16.00 7,663.38

level., etc. Complete, as per detailed & directed by Architect /

Consultant & and directed by EIC.

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting with

vibrator curing centering & shuttering in true line and level etc, but

excluding the cost of reinforcement for RCC work in (F) Wall

15 (Vertical and horizontal fins)., & (F1) Wall cap & coping For First Cmt. 4.00 7,703.57

Floor level., etc. Complete, as per detailed & directed by Architect /

Consultant & and directed by EIC.

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting with

vibrator curing centering & shuttering in true line and level etc, but

excluding the cost of reinforcement for RCC work in (F) Wall

16 (Vertical and horizontal fins) & (F1) Wall cap & coping For For Cmt. 0.20 7,743.87

Second Floor level., etc. Complete, as per detailed & directed by

Architect / Consultant & and directed by EIC.

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting with

vibrator curing centering & shuttering in true line and level etc, but

excluding the cost of reinforcement for RCC work in (D) For

Columns for any type of cross sectional area for G.F. Lvl. etc., for

any type of cross section area complete as directed by E. I. C.

Sr. Qty. May More Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. Or Less Rate In FIghure

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting with

vibrator curing centering & shuttering in true line and level etc, but

excluding the cost of reinforcement for RCC work in (D) For

Columns for any type of cross sectional area Work at First floor etc.,

for any type of cross section area complete as directed by E. I. C.

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting with

vibrator curing centering & shuttering in true line and level etc, but

excluding the cost of reinforcement for RCC work in (D) For

19 Columns for any type of cross sectional area Work at Second floor Cmt. 6.00 7,729.93

etc., for any type of cross section area complete as directed by E. I.

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting with

vibrator curing centering & shuttering in true line and level etc, but

excluding the cost of reinforcement for RCC work in LINTLE-BEAM,

LINTEL & SILL & COPING for all cross sectional area at G.F. Lvl. etc.,

complete as directed by E. I. C.

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting with

vibrator curing centering & shuttering in true line and level etc, but

excluding the cost of reinforcement for RCC work in LINTLE-BEAM,

LINTEL & SILL & COPING for all cross sectional area at F.F. Lvl. etc.,

complete as directed by E. I. C.

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting with

vibrator curing centering & shuttering in true line and level etc, but

excluding the cost of reinforcement for RCC work in LINTLE-BEAM,

LINTEL & SILL & COPING for all cross sectional area at S.F. Lvl. etc.,

complete as directed by E. I. C.

Providing and laying Controlled cement concrete M:25 and Curing

Complete for reinforced concrete Chhajjas up to all floor two level

including finishing the exposed surfaces with cement mortar 1:3 (1-

cement, 3 Fine sand) to give a smooth and even surface centering

and formwork and curing complete excluding cost of reinforcement.

etc., complete as directed by E. I. C.

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting with

vibrator curing centering & shuttering in true line and level etc, but

excluding the cost of reinforcement for RCC work in SLAB BEAMS for

Ground floor & Super structure, & for any type of cross sectional

area. etc., complete as directed by E. I. C.

Sr. Qty. May More Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. Or Less Rate In FIghure

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting with

vibrator curing centering & shuttering in true line and level etc, but

excluding the cost of reinforcement for RCC work in SLAB BEAMS at

First Floor & for any type of cross sectional area. etc., complete as

directed by E. I. C.

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting with

vibrator curing centering & shuttering in true line and level etc, but

excluding the cost of reinforcement for RCC work in SLAB BEAMS at

Second Floor to Terrace Floor & for any type of cross sectional area.

etc., complete as directed by E. I. C.

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting with

vibrator curing centering & shuttering in true line and level etc, but

excluding the cost of reinforcement for RCC work in Staircase with

steps / Kadi Tappa, waist slab and landing at any height and level as

directed etc., complete as directed by E. I. C.

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting with

vibrator curing centering & shuttering in true line and level etc, but

excluding the cost of reinforcement for RCC work at Plinth to

Ground FLOOR SLAB for all thickness/cross section etc. complete as

directed by E. I. C.

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting with

vibrator curing centering & shuttering in true line and level etc, but

29 excluding the cost of reinforcement for RCC work at FIRST FLOOR Cmt 31.00 6,658.22

SLAB for all thickness/cross section etc. as directed by E. I. C.

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting with

vibrator curing centering & shuttering in true line and level etc, but

30 excluding the cost of reinforcement for RCC work in SECOND FLOOR Cmt 10.00 6,698.42

SLAB for all thickness/cross section etc. complete as directed by E. I.

Providing TMT Bar FE 500D reinforcement for R.C.C. work including

31 bending, binding and placing in position complete upto ground Kg 33300.00 76.21

floor level

Providing TMT Bar FE 500D reinforcement for R.C.C. work including

32 bending, binding and placing in position complete upto First floor Kg 11341.00 77.21

Providing TMT Bar FE 500D reinforcement for R.C.C. work including

33 bending, binding and placing in position complete for Second floor Kg 3266.00 78.21

to terrace floor Lvl.

Brick work using common burnt clay building bricks having

crushing strength not less than 35 kg./Sq.Cm. in foundation and

34 plinth in Cement Mortar 1:6. (1- Cement : 6 -fine sand)(B) Cmt 85.00 4,021.02

Conventional

Sr. Qty. May More Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. Or Less Rate In FIghure

Brick work using common burnt clay building bricks having

crushing strength not less than 35 kg./Sq.Cm. at Ground floor Lvl.

35 in cement Mortar 1:6 (1-Cement :6-finesand) (B) Conventional For Cmt 60.00 4,295.99

Ground Floor etc. Complete.

Brick work using common burnt clay building bricks having

crushing strength not less than 35 kg./Sq.Cm. at First floor Lvl. in

36 cement Mortar 1:6 (1-Cement :6-finesand) (B) Conventional For Cmt 42.00 4,336.49

First Floor etc. Complete.

Brick work using common burnt clay building bricks having

crushing strength not less than 35 kg./Sq.Cm. at Second floor to

terrace floor Lvl. in cement Mortar 1:6 (1-Cement :6-finesand) (B)

37 Conventional For above First Floor to Terrace Floor etc. Complete, as Cmt 29.00 4,376.98

per detailed & directed by EIC.

Half brick masonry in common brunt clay building bricks having

crushing strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:4

38 (1- Cement : 4 -coarse sand ) (B) Conventional half brick masonry Smt 176.00 653.17

at Ground Floor level.(B) Conventional

Half brick masonry in common brunt clay building bricks having

crushing strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:4

39 (1- Cement : 4 -coarse sand ) (B) Conventional half brick masonry Smt 95.00 659.17

at First to Terrace Floor Lvl.(B) Conventional

Half brick masonry in common brunt clay building bricks having

crushing strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:4

40 (1- Cement : 4 -coarse sand ) (B) Conventional half brick masonry Smt 49.00 665.17

at Terrace Floor Lvl.(B) Conventional

Providing & Fixing chicken mesh jali at R.C.C. masonry joints at any

41 height with all labour & material, etc. Complete, as per detailed & Smt 262.00 314.41

directed by EIC.

Providing 15mm thick cement plaster in single coat on Rough

(Similar)side of single or half brick walls for interior plastering for

42 Ground floor level and finished even and smooth in (ii) Cement Smt 493.00 157.17

mortar 1:4 (1-cement :4-sand)

Providing 15mm thick cement plaster in single coat on Rough

(Similar)side of single or half brick walls for interior plastering for

43 First floor level and finished even and smooth in (ii) Cement mortar Smt 547.00 180.56

1:4 (1-cement :4-sand)

Providing 15mm thick cement plaster in single coat on Rough

(Similar)side of single or half brick walls for interior plastering at

44 Second Floor to Terrace floor level and finished even and smooth in Smt 133.00 203.95

(ii) Cement mortar 1:4 (1-cement :4-sand)

Providing 10mm thick cement plaster in single coat on

brick/concrete Ceiling for interior plastering for Ground Floor level

45 and finished even and smooth in (ii) Cement mortar 1:4 (1- cement Smt 297.00 140.62

Providing 10mm thick cement plaster in single coat on

brick/concrete Ceiling for interior plastering for First Floor level and

46 finished even and smooth in (ii) Cement mortar 1:4 (1- cement :4- Smt 255.00 164.01

Sr. Qty. May More Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. Or Less Rate In FIghure

Providing 10mm thick cement plaster in single coat on

brick/concrete Ceiling for interior plastering at Second Floor to

47 terrace floor Lvl. and finished even and smooth in (ii) Cement Smt 51.00 187.41

mortar 1:4 (1- cement :4-sand)

20mm thick sand faced/mala cement plaster on walls upto height

10 metres above ground level consisting of 12mm thick backing

48 coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick finishing coat Smt 734.00 300.66

of C.M. 1:1 (1-cement : 1-sand) etc. complete.

Providing 20mm thick double coat external cement plaster on brick/

concrete work for plastering comprising of base coat of 12mm thick

cement plaster in cement mortar (1 Cement:4 coarse sand) in rough

finishing and 8mm thick top coat of cement mortar 1:2 (1 Cement:

2 Coarse sand) finished rough / with Trovel including scaffolding

curing etc. complete.

Brick Tile cladding work with common burnt clay F.P.S. (non

modular) tile bricks of class designation 10 using tile adhesive of

approved brand including making Horizotal and vertical grooves of

50 8-10mm wide with grouting and coating complete as directed Smt 559.00 1,875.57

eingineer-in-charge in superstructure above plinth and upto floor

five level.

Add for plaster groove in plastered surface or moulding to R.C.C.

51 projections. Rmt 838.00 41.66

Providing & Laying Green Polished Kota Stone for flooring over

25mm (average) thick base of CM 1 : 6 (1 cement : 6 sand) Laid over

& jointed with neat grey cement slurry including filing the joint with

white / colour cement, complete in true line & level / slope, cleaning

& rubbing, & for wall cladding, risers of steps, Dado & pillars laid on

52 10mm thick cement mortar 1:3 (1-cement :3-coarse sand) & jointed Smt 509.00 1,340.27

with grey cement slurry, groove and molding as directed etc.

complete as per detailed by architect & directed by Engineer-In-

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm

(average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on

new surface or fixing on existing flooring by adhesive material

including dismentaling of existing flooring and jointed with color

cement slurry including finised with flush pointing & cleaning the

surface etc. complete for antiskit.

Providing and laying Vitrified glazed tiles 8 to 10 mm thick 24" x

24" or as specified in skirting risers of steps and dedo on 10mm

54 thick. cement plaster 1:3 (1-cement: 3-coarse sand) and jointed Smt 188.00 1,141.45

with white cement slurry as per the detailed by Architect & direction

of Engineer-in- Charge.

Sr. Qty. May More Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. Or Less Rate In FIghure

Providing and laying Ceramic tiles 6mm thick in flooring, treads of

steps and landing laid on a bed of 12mm thick Water proof cement

plaster with mortar 1:3 (1-cement : 3- coarse sand ) & Water

Proofing Chemical Agent and cement vata (10cm. x 10 cm. size)

quarter round in cement mortar 1:1 including neat cement

55 finishing, watering etc. complete finishing with flush pointing in Smt 19.00 1,181.75

white cement. (For UG tank flooring)

Providing and laying Ceramic tiles 6mm thick in skrting, risers of

steps and dedo on 10mm thick Water proof cement plaster with

mortar 1:3 (1-cement : 3- coarse sand ) & Water Proofing Chemical

56 Agent and finishing with flush pointing in white cement. (For UG Smt 58.00 1,216.95

Tank walls)

Providing and fixing 18 mm thick gang saw cut, mirror [Hi-Gloss]

polished at all exposed Surface, Pre-moulded and pre-polished,

machine cut Granite of any colour and shade, & finish, as per

detailed by architect / Consultantfor flooring, dado skirting,

cladding, steps and risers, kitchen platforms, vanity counters,

window sills , fascias and similar locations of required size,

approved shade, colour and texture laid over 20 mm thick mortar

1:4 (1 acid proof cement : 4 coarse sand). And In dado/skirting on

In dado/skirting on 12 mm thick mortar 1:4 (1 acid proof cement :

57 coarse sand), joints treated with white cement, mixed with matching Smt 134.00 3,365.77

pigment, epoxy touch ups, including Spacer tape 6.4 mm thick x

TO 6 mm as per detailed groove, rubbing, curing, moulding and

polishing to edges to give high gloss finish as per concept etc.

complete at all levels.

Providing and laying Rough Kota stone slab flooring over 20mm

(Average) thick base of cement mortar 1:6 (1-cement : 6- coarse

58 sand) or L.M. 1.1.5 laid over and jointed with grey cement slurry Smt 106.00 1,096.33

including rubbing and polishing etc. complete. (B) 30mm thick.

Providing and fixing sandwich type platform including supplying

and fixing granite stone 18 mm thick mirror polished stones in top

and side position and vertical strip at front over 25 mm thick

polished kota stone platform fixing in top and sides and

intermediates supports fixing with cement mortar and adhesive and

finishing including making recess for Kitchen/ Laboratory sink etc.

complete as approved and directed by Consultant / EIC.

Sr. Qty. May More Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. Or Less Rate In FIghure

Providing and laying broken chine mosaic flooring for terrace using

12 mm to 20 mm broken pieces of glazed tiles to be laid over

mortar 1:3 to plain or slope and to be tempered to bring mortar

60 creme out upto surface using white cement including rounding off Smt 297.00 747.29

junctions and extending them upto 15 cm along the wall,clearing

with water and oxalic acid etc. as directed.

Providing and laying cement concrete flooring 1:2:4 (1-cement:2-

coarsesand: 4-graded stone aggregate 20mm nominal size) laid in

61 one layer and finished with a floating coat of neat cement. (B) Smt 0.00 351.56

50mm thick.

Providing wood work in frames of Size 12.5 x 10 Cm. for doors,

windows, clerestory windows and other frames, wrought framed

and fixed in position with hold fast lugs or with dash fasteners of

required dia & length Incl. Providing and fixing 35 mm thick (or as

specified) ISI marked flush door shutters conforming to IS :

(Part I) decorative type, core of block board construction with frame

of 1st class hard wood, with 1mm. thk, ISI marked designed

laminate in any finish on both faces of shutters., slit openings with

bidding Patti & 6mm thk designed acid wash glass,. Stainless Steel

62 butt hinges [125x65x2.5mm. IS1281712] with necessary screws, Smt 49.00 7,276.95

using branded S.S. matt /glossy / platinum finished accessories,

Colour / polishing all bidding parts, and also incl. with all Material,

labour, tools, tolerance, scaffolding etc. complete as per concept

/direction and approved by Architect, and directed by Engineer-In-

Providing & Fixing Walnut anodized Aluminum Hi-Profile sections

(JINDAL-DOMAL Series OR Equivalent), hI-perfomance Sliding/

Openable window/door with Required thick toughened designer

glass of Saint Gobain or equielent, is used for Aluminum Hi-Profile

Section with necessary accessories and with additional shutter with

Stainless Steel Mosquito net. [In Opening Position always one of

Mosquito net shouter should be in Close Position], captive bead,

extremely difficult to remove once glazed, high performance

weather stripping, internal wedge gasket, Bottom, side and top

section including necessary filling up the gaps at junctions, with

required EPDM rubber/ etc. and ISI ebco make,"Lx. Premium"

Required Finish door fixture Accessories As per Architect Concept,

63 High security interlocking bead, Sheet membrane flashing , 2" over Smt 109.00 7,506.98

jamb flashing, New Blocking with new backer rod and sealant,

channel glide with runner, slide fold hinge when ever need of

sufficient capacity, with warranty, all types of material, labour,

transportation, tools tolerance and matching required level with

Flooring etc. complete as per Architect concept and as per detailed

by Architect / consultant & Directed by EIC.

Sr. Qty. May More Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. Or Less Rate In FIghure

Providing and fixing standared extruded of alluminium section of

size 63mm x 38.10mm x 1.2mm @ Wt. 0.643 Kg/mt with colour

64 anodized alluminium frame for ventilation with 5 mm thick frosted Smt 3.00 1,175.56

glass as details etc complete for Ventilation

Providing and fixing hydraulic door closer of approved size and

65 make as directed engineer in charge. all lift, level and leads. Each 8.00 646.40

Providing & Fixing M.S. grills of required pattern to wooden frames

of windows, RCC or as specified in drawings etc. with M.S. flats at

66 required spacing & frame around, square or round bars with round Kg 3914.00 101.17

headed bolts & nuts or by screws (A) Plain Grill, as per detailed &

directed by EIC.

Providing, supplying, fixing, fabricating, erecting, aligning the

structural steel like pivot ,tubular 'T', 'I" section, angle, plate, beam,

channel section, Bar , hollow box or Z purloins, Round or Square

Pipes, of approved make, for built up purloins, roof trusses,

columns, side runners, tie beams, sag rods, base plates gusset

plates, cap plates, bearing bracing, gantry girders, rails, require

support, pipes, including all welded or bolted steel structures of

various types with approved I.S.I. mark electrodes, bolts, anchor

bolts including cost of thread, Anchor plate cleats etc. in RCC or

masonry work, including cutting, bending, welding ,fixing,

supplying , Fabricating Decorative fevisted section or any structured

member required to complete the job for Bridge, Trusses, Canopy,

67 doors, Frame, Railing, Entrance gate, pergola, Decorative hanging Kg 1558.00 127.95

light , New window, parking shed or space frame or any other

required specified area as shown on drawing and detailed

specification or as per design incl. three coats of approved brand

primer and two coats of paints, necessary scaffolding, tools

tolerance etc. complete as directed by Engineer In Charge. (payment

will be made for weight of metal used in the work)

Finishing wall with Weather proof exterior emulsion paint on wall

surface (two coats) to give an required shape even shade after

68 thoroughly brushing the surface to remove all dirt, and remains of Smt 974.00 114.53

loose powdered materials.etc complete.

Applying two coats of Birla or Asian acrylic lappy ( putty) & two

coats of primer at Wall painting (two coats) with plastic emulsion

paint of approved brand & manufacture on undecorated wall

surfaces to give an even shade including thoroughly brushing the

surface free from mortar droppings & other foreign matter & sand

papered smooth, as per detailed & directed by EIC.

Applying two coats of Birla or Asian acrylic lappy ( putty) & two

coats of primer at Ceiling painting (Two coats) with plastic emulsion

paint of approved brand and manufacture on undecorated Ceiling

surface to give an even shade including thoroughly brushing the

surface free from mortar droppings and other foreign matter and

sand papered smooth, as per detailed & directed by EIC.

Sr. Qty. May More Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. Or Less Rate In FIghure

Painting two coats (including priming coat) on new steel and other

metal surface with enamel paint, brushing, interior to give an even

71 shade including cleaning the surface an even shade including Smt 402.00 122.49

cleanicn the surface of all dirt, dust and other foreign matter.

Providing and fixing roof panel shall be made out of 0.5 mm thick

pre coated GI sheet . The Precoated sheet shall be of minimum

mpa steel grade confirming to IS 14246:1995 and shall have zinc

coating of minimum 120 gsm as per IS:277:1992 , 5-7 microns

epoxy primer on both side of the sheet and polyester top coat 15-

18 micron. The PPGI Sheet shall have plastic protective guard film of

72 minimum 25 microns to avoid scratches during transportation. The Smt 10.00 858.67

ridge shall be fixed to the steel members by pop rivet or self

drilling/self stitching fastners @ maximum 450 mm c/c along

length of capping/flashing etc complete .

SS RAILING : Providing and fixing stainless steel (Grade 304) railing

Horizontal top pipe of 50mm dia., verticle Sq pipe 32X32 mm

mm c/c and 16 mm Dia. 3 Nos. Horizontal Pipe equval Spacing

Hollow Pipes, channels, plates etc., including welding, grinding,

buffing, polishing and making curvature (wherever required) and

fitting the same with necessary stainless steel nuts, Plates and bolts

complete, i/c fixing the railing with necessary accessories &

stainless steel dash fasteners, stainless steel bolts etc., of required

73 size, on the top of the floor or the side of waist slab with suitable Rmt 57.00 3,766.09

arrangement as per approval of Engineer-in charge, (for payment

purpose only weight of stainless steel members shall be considered

including fixing accessories such as nuts, bolts, fasteners etc.). as

per Drawing and Approve by Engineer In Charge

SS RAILING (HAND RAIL) : Providing & Fixing Stainless steel

grade pipe railing Horizontal 50 mm dia. 1 Nos. and Supprt pipe

from wall 16mm Dia. at everymax 0.90mtr C/C including welding,

grinding, buffing, polishing and making curvature (wherever

required) and fitting the same with necessary stainless steel nuts,

Plates and bolts complete, i/c fixing the railing with necessary

74 accessories & stainless steel dash fasteners, stainless steel bolts Rmt 54.00 1,405.26

etc., fixed on Concrete or brick work . Rate including of all

materials.labour, fixing & polishing etc. comp. as per Drawing and

Approve by Engineer In Charge

Sr. Qty. May More Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. Or Less Rate In FIghure

Providing and fixing retro Reflective Hi Intensity Micro Prismatic

Grade Board using 2mm Aluminum / 4mm ACP, angle iron 75 x

x 6mm. Descaling and degreasing the board as per requirement

using epoxy reflactive process by screen painting as directed etc.

complete including transporting and fixing in C.C. 1:2:4 with

necessary excavation curing etc. complete as per I.R.C. 67-2012

75 design. A warranty for 7 years for the Retro reflective sheeting from Smt. 5.00 7,610.66

original manufacturer & a certified copy of 3 year outdoor exposure

test report from third party test lab for the product offered shall be

submitted by contractor. (B)Class B Type-4(MDR/ODR) retro

reflective sheeting

Water proofing-Providing and applying primer + 2 coats of Single

component,

high solids, cold applied liquid polyurethane elastomer

waterproof membrane over uniform surface of slab. Apply

2 coats at dosage of 1.5 kgs per sq.m to achieve the

required minimum DFT of 1.5mm. It should have

following properties :-

1. Total Solids % 95 ± 5%

2. Specific Gravity 1.30 ±

76 3. Elongation % ≥ 700% Smt 297.00 979.14

4. Dosage 1.2 - 1.5 kg/m2 in two coats

5. Tack Free Time 24 - 48 hrs

6. Tensile Strength N/mm² ≥

7. Low Temperature Crack Bridging No crack

8. DFT 1.2 - 1.5 mm on smooth, non- absorbent surface

9. Shore Hardness 40 ±

10. Conformance Conforms to ASTM C

Providing and fixing pre-cast Rubber Dye / steel Dye inter locking

concrete block 60mm thick with grade of concrete M300 pnumatic

compressed / vibrated mechanically and as per approved design

Confirming to IS 15658 : 2006 including 35 mm Sand layer for

levelling and filling the joint with sand in proper line and level as

per guidlines of IRC SP 63-2018 etc. Complete

Providing and fixing pre-cast concrete kerb stone of gray cement

based concrete block 30cm length, 30cm height and 15cm thick of

M200 grade concret as per approved design and including

78 excavation for fixing in proper line and level, filling the joint with Rmt 55.00 380.19

C:M 1:3 (1 cement:3 fine sand) etc complete.

Sr. Qty. May More Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. Or Less Rate In FIghure

TRIMIX CEMENT CONCRETE ROAD WITH EXPANSTION JOINTS.: M20

Cement Concrete laid in required slope at concrete floor as directed

and specified using necessary steel form work with M.S. Channels

including forming construction & contraction joints 4 mm to 6mm

wide by cutting the floor up to ¼ th depth of thickness of the

concrete depth using mechanical saw and sealing the joint with poly

sulphide sealant up to full depth of cutting including providing &

fixing M.S. dowels bars with bitumen painted of full length as

shown in drawing as to form the bays not exceeding 6.0 m X 4.5 m

79 etc. complete as per directed by Architect or Engineer-In-Charge. Cmt 17.00 7,337.09

For all level and leads.(a) For RCC Road Note: Rates are Incl. cost of

Cement Concrete Pavement shall be 150mm. Thk. or as detailed and

rolling 2 times as per mentioned above and also all tools tolerance,

shuttering, channel, etc. complete as per detailed & Directed by

Architect & EIC.

Providing and laying Precast Lightweight concrete hollow core wall

with hollow core concrete unit of approved make & size of 120 mm

thick, 600 mm wide and 2400 mm / 2600 mm / 2850 mm /

mm / 3300 mm in legth made from of controlled cement concrete

80 M20 having cube compressive strength not less than 20 MPa Smt 198.00 850.42

jointing with high strength & tensile adhesion non-shrink

cementitious joint compound / P.U. Foam. (Plaster not required)

Providing & Laying & jointing in true line level 110mm dia U.P.V.C.

SWR type B pipe confirming to IS 13592-1992 with one end plain &

other end socket with rubbering & Fixing conforming to ISI 14735-

1999 of approved make for drain system pipe line, pipe shall be

jointed with each other with rubber lubricant, pipe shall be fixed on

wall using PVC clamps of the size 160mm dia x 210mm length x

196mm high at every 2000mm centre to centre or shall be

81 concealed in wall as directed necessary fittings such as bends, Rmt. 58.00 835.15

shoes, etc. incl. testing of pipe & joint & jointed with adhesive

solvent, cement incl. cost of all material etc. complete as per

detailed, directed & approved by the consultant / EIC.

Drilling 200/215mm dia bore in over burden rocky or loose

collapsible/ bolder strata including lowering and fixing of 175mm

82 nominal dia UPVC Pipes up to required depth and further drilling of Mts. 150.00 418.14

165 mm dia bore hole in rocky strata by DTH Rig including fitting of

bore plug.

Providing / Supplying of 175mm nominal dia Plain casing UPVC Pipe

"CS-Type" at store of site of standard length with necessary

couplers, cement solvent, joint along with required cement solvent

including freight/Insurance/Octroi/ Taxes etc. complete detailed

83 specifications and tests shall be conforming to IS 12818 / 1992 Mts. 150.00 915.06

with latest amendment.

Sr. Qty. May More Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. Or Less Rate In FIghure

Lowering of Submersible pump set complete with required nos and

size of Column pipe ( GI / HDPE pipe) erected by means of proper

chain pulley block & pipe wrenches after checking of threads of

84 each pipe with coupling to take the load of the pump set and pipe Job 1.00 2,828.00

assembly filled up with water with trail testing, wiring GEB test

Single phase borewell submersible pump motor set

85 MOC: Casing: CI-FG260, Impeller: Bronze & Shaft: SS:410 with SET 1.00 21,526.13

control panel Cat Q-2.5

Flat PVC cable size 4.0 sq.mm

HDPE pipe - 40 mm dia.

Monobloc pump 3 phase 400/440 volt, 50 Hz AC Supply &

RPM as per IS 9079 at departmental stores with following MOC:

88 Casing: CI-FG260, Impeller: Bronze & Shaft: SS:410, 7.5Hp 24 m Nos 1.00 24,240.00

Control panel- DOL / Star Delta starter suitable for local & remote

pump control application consisting of MPCB, overload relay and

contactors as per Type II coordination including digital voltmeter,

protective relays & control accessories.

Providing laying and jointing in true line and level 75mm dia.

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the wall with

the help of clamp at every two metre C/C or shall be concealed as

directed including necessary fittings etc. including testing of pipe

and joints and fixing the same with adhesive solvent, including cost

of all materials.

Providing laying and jointing in true line and level 15mm dia.

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the wall with

the help of clamp at every two metre C/C or shall be concealed as

directed including necessary fittings etc. including testing of pipe

and joints and fixing the same with adhesive solvent, including cost

of all materials.

Providing laying and jointing in true line and level 25mm dia.

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the wall with

the help of clamp at every two metre C/C or shall be concealed as

directed including necessary fittings etc. including testing of pipe

and joints and fixing the same with adhesive solvent, including cost

of all materials.

Providing laying and jointing in true line and level 40mm dia.

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the wall with

the help of clamp at every two metre C/C or shall be concealed as

directed including necessary fittings etc. including testing of pipe

and joints and fixing the same with adhesive solvent, including cost

of all materials.

Sr. Qty. May More Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. Or Less Rate In FIghure

Providing laying and jointing in true line and level 50mm dia.

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the wall with

the help of clamp at every two metre C/C or shall be concealed as

directed including necessary fittings etc. including testing of pipe

and joints and fixing the same with adhesive solvent, including cost

of all materials.

Providing & Fixing gun metal check or no return full way wheel valve

95 etc. complete as per the instruction of EIC. (C) 25 mm. Dia Each 10.00 420.63

Providing & Fixing gun metal check or no return full way wheel valve

96 etc. complete as per the instruction of EIC. (E) 40 mm. Dia Each 10.00 663.43

Providing and fixing screw down bib taps of following size.(A) Brass

97 screw down bib tap polished bright. (i) 15mm dia. Each 8.00 214.81

Providing and fixing brass screw down stop tap.(B) 20mm dia.

Providing erecting and fixing double coated ISI water tank of

99 required capacity each with all necessary fittings and connection Liter 8000.00 3.95

etc. complete on terrace

Providing & Fixing PVC SWR Nahni trap IS 14735 for drain- 100mm

diameter with 150 mm X 150mm S.S.jali for floor or nahni trap of

the following nominal diameter of self cleansing design with C.I

100 screed down or hinged grating including the cost of cutting & Each 14.00 571.08

making good the walls, as per detailed, directed & approved by the

Providing and fixing S.W. gully trap with C.I. grating brick masonry

chamber and water tight C.I. cover with frame of 300mm x 300mm

101 size (inside) with standard weight.(i) Square mouth traps. (A) Each 8.00 1,292.19

100mm x 100mm size P type.

Constructing brick masonry chamber for underground C.I.

Inspection chamber & bends with bricks having crushing strength

not less than 35Kg. Cm2 in C.M. 1:5 C.I. cover with frame (Light

duty) 455mm x 610mm internal dimensions, total weight of cover

with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) & Wt. of

frame 15Kg. ) (R.C.C. top slab with 1:2:4 mix (1-cement :2- coarse

sand :4-graded stone aggregate 20mm size) foundation concrete

102 1:5:10 inside plaster 15mm thick with cement mortar 1:3 finished Each 6.00 2,932.93

smooth with a floating coat of neat cement on walls & bed concrete

for (i) Inside dimensions 455mmx 610mm & 450mm deep for

single pipe line. etc. complete as per detailed, directed & approved

by the consultant / EIC.

Sr. Qty. May More Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. Or Less Rate In FIghure

Constructing brick masonry manhole with R.c.c. top slab in 1:2:4

mix ( 1 cement : 2 coarse sand :4 grade stone aggregate 20mm size

) foundation concrete 1:3:6 mix ( 1 cement : 3 coarse sand :6 brick

bats 40 mm size ) inside plaster 15mm thick with CM 1:5 ( 1 cement

: 5 Coarse sand ) finished with a floating coat of neat cement &

making channels in cement 1:2:4 mix ( 1 cement : 2 coarse sand :4

stone aggregate 20mm nominal size ) finished smooth complete

including curing & testing… ( I ) inside 900mm x 1200 mm & 1.5 m

deep including R.c.c. cover with frame size 560 mm diameter ( A )

103 with 230mm thick walls of brick masonry using brick having Each 6.00 19,330.46

crushing strength not less then 35 kg/sqcm in CM 1 : 5 ( 1 cement :

5 coarse sand ), (2) B type depth 1.50 Meter for 150mm diameter

sewer.. etc. complete as per detailed, directed & approved by the

consultant / EIC.

Providing Septic Tank of 5.00 mt x 3.00 mt x2.00 mt size for

Sewerage including excavation with any strata up to four meter

depth,PCC in Bottom Slab 1:3:6,Brick Work in cement mortar 1:5,

RCC M200 Slab on Top And bottom, required filling for Tank

104 including making Required line for water inlet, precast RCC M.200 Each 1.00 1,32,026.19

Frame & cover etc.as directed by engineer in charge. etc complete,

septic tank as per detailed drawing.

Providing & Laying & jointing in true line level U.P.V.C. SWR type B

pipe confirming to IS 13592-1992 with one end plain & other end

socket with rubbering & Fixing conforming to ISI 14735-1999 of

approved make for drain system pipe line, pipe shall be jointed with

each other with rubber lubricant, pipe shall be fixed on wall using

PVC clamps of the size 160mm dia x 210mm length x 196mm high

at every 2000mm centre to centre or shall be concealed in wall as

directed necessary fittings such as bends, shoes, etc. incl. testing of

pipe & joint & jointed with adhesive solvent, cement incl. cost of all

material etc. complete as per detailed, directed & approved by the

consultant / EIC. (A) 160mm dia. etc. complete as per detailed,

directed & approved by the consultant / EIC.

Providing laying (to level or slopes) and jointing reinforced concrete

Light duty non-pressure pipes I.S. class NP2 of the following

106 internal diameter with collars and butt ends prepared for collar Rmt. 40.00 665.48

joints including testing of joints complete.(D) 300mm

Providing soak pit of 2.5 Mtr. Internal dia. and 5 mtr Depth internal

clear dimention including the cost of excavation, P.C.C. 1:4:8 and

filling brickbats with dry masonry work, Honeycomb masonary

work, M:20 RCC. SLab incl. form work including FE-500

107 Reinforcemnt, M.S.cover, C.I. Pipe & cowl vent, vatas in C.M. 1:3 Each 1.00 36,360.00

with finishing curing etc. complete as directed.. etc. complete as per

detailed, directed & approved by the consultant / EIC.

Sr. Qty. May More Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. Or Less Rate In FIghure

Providing & Fixing white colour, Vitreous china, under / Over

Counter wash basin with single hole for pillar type with Cl or MS

brackets painted white including cutting holes, ranking bolts for

Fixing & marking good the same, including Fixing C.P. Brass waste

coupling 32mm dia & Bottal trap & 15mm dia pillar tap, Bottle Trap,

as approved, capstan head C.P. screwed down high pressure with

screw shank & back nuts & rubber plugs, 15mm dia brass stop cock

108 (50/75mm p.v.c. Drain connection pipe, Water Connection Pipe of Each 4.00 2,841.43

required Size, & testing the same for leak proof, etc. with all

material & labours to complete this job in all respected manners,

etc. complete as per detailed & approved by the consultant &

directed by EIC.

Providing and fixing wash down water closet (European type,Wall

hung W.C. Pan) with integral P or S trap including jointing the trap

with soil pipe in Cement Mortar 1:1 (1 - Cement : 1 - Fine Sand)

with plastic seat and cover for wash down water closer with C.P.

brass hinges, C.P. brass toilet paper holder, Jet Spray, Metropole

109 flush valve Incl. Connection and rubber buffers. (A) Vitreous China., Each 4.00 7,001.62

etc. complete as per detailed & approved by the consultant &

directed by EIC.

Providing and fixing water closet squatting Pan including trap and

foot rest (Indian type W.C. Pan) size 580mm (Earthwork, bed

110 concrete to be measured and paid for separately) (A) Vitreous Each 1.00 1,365.00

China.(I) Long pattern = White colour

Providing and fixing Urinal or approved quality including conecting

the Urinal with waste pipe , tap etc. complete.(A) White earthenware

111 flat back or corner type size 430mm x 260mm x 350mm. Each 2.00 1,036.27

Providing & Fixing C.P. brass towel rail Approved Make complete

with C.P. Brass brackets fixed to wooden plugs with C.P. Brass

screws,, etc. complete as per detailed, directed & approved by the

consultant / EIC. (B) 600mm x 20 mm size, etc. with all material &

labours to complete this job in all respected manners, etc. complete

as per detailed & approved by the consultant & directed by EIC.

Providing & Fixing 600mm x 450mm beveled edge mirror of

superior glass mounted on 6mm thick A.C. sheet or plywood sheet

& Fixing to wooden plugs with C.P. brass screws & washers, etc.

with all material & labours to complete this job in all respected

manners, etc. complete as per detailed & approved by the

consultant & directed by EIC.

Sr. Qty. May More Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. Or Less Rate In FIghure

Providing & Fixing handicap toilet set with Wall-mounted European

Closet & wash basin & all handicap requirement with dual flush

tank, seat & lead (heavy duty) including C.I. Brackets, C.P. brass

hinges, M.S. / C.I. painted brackets, Waste Coupling, 32mm size

bottle trap etc. all Internal fittings complete with grab rails, swin

type grab bar etc. rubber buffers, C.P nuts, bolts etc making holes

in walls & floors, & finishing for ready to use. The rate includes all

necessary connection charges as per product detail to the

114 satisfaction of Architect / engr. in-charge where required & the final Each 1.00 40,425.96

handing over etc. complete as per specifications, drawings & as

directed by the Engineer-in-charge. The scope includes Providing

and fixing all the necessary fittings of approved brand and as per

directed by Architect/EIC.

Providing & Fixing pillar tap, screw down high pressure with screws,

115 shanks & back nuts. (i) 15mm dia. Each 4.00 308.73

Providing & Fixing brass screw down stop tap. (A) 15mm dia.

Providing and fixing Kitchen / Laboratary sink with C.I. or M.S.

117 brackets, painted white including cutting holes in walls and making Each 0.00 2,280.27

good the same but excluding fittings.

Providing and Fixing Pipe Hanger on Ceilling for Dutile type Ceilling

118 Piping Work as Per Directed By Engineer In Charge Each 10.00 707.00

Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing

drain pipe etc. and repairing the hole after insertion of drain pipe

etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand :

graded stone aggregate 20 mm nominal size), including finishing

complete so as to make it leak proof.

Point wiring in Copper (Modular) Point wiring for Light / Bell with

2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of ISI

marked 1.1 KV grade FRLS PVC insulated multistrand copper wires,

in following type of pipe to be erected concealed in/ on surface on

wall/ceiling complete with 6A Modular type switch / bell push &

accessories and earth continuity of following type, erected on PVC /

Metallic box, single mounting base frame covered with

120 textured/metallic front plate modules erected on / in wall / ceiling Pt. 53.00 485.81

as per pipe erected, with necessary Lamp holder/ceiling rose /

H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete Cat. III

Sr. Qty. May More Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. Or Less Rate In FIghure

Point wiring for secondary light point with 2-1.5 sq.mm &

earthwire of 1.5 sq.mm (green) both are of ISI marked 1.1 KV grade

FRLS PVC insulated multistrand copper wires, in following type of

pipe to be erected concealed in / flushed on wall/ceiling, complete

with earth continuity and necessary connection with primary light

with accessories erected on Metal / PVC box covered with 3 mm

thick PC(Polycarbonet) / Acrylic sheet for open / concealed wiring.

with necessary Lamp holder / ceiling rose / H.D.Connector as

Note:- Maximum up to 6 mtrs length, excess will be considered as

Mains for Secondary Point. (f) with medium class Rigid PVC pipe

and accessories erected concealed in wall/ceiling complete Cat. III

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(Green) both are of .ISI marked 1.1 KV Grade FRLS PVC insulated

multistrand copper wires, in following type of pipe to be erected

concealed in / flushed on wall/ceiling complete with 6A Modular

type switch and hum free EME four or more step type electronic fan

regulator with separately mounted and accessories with earth

continuity of following type erected on PVC / Metallic box, single

mounting base frame covered with textured/metallic front plate

modules erected on / in wall / ceiling as per pipe erected. with

necessary ceiling rose / H.D.Connector as directed

(f) with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete Cat-III

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated

multistrand copper wires, in following type of to be erected

concealed in / on surface of wall / ceiling complete with Modular

type switch & 5 pin Plug erected on PVC / Metallic box covered with

appropriate front plate modules erected on / in wall / ceiling as per

123 pipe erected with following type of accessories. Pt. 40.00 510.05

[I] For 6A Plug with 2-1.5 sq.mm Cu. Wire

(f) with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete Cat-III

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated

multistrand copper wires, in following type of to be erected

concealed in / on surface of wall / ceiling complete with Modular

type switch & 5 pin Plug erected on PVC / Metallic box covered with

appropriate front plate modules erected on / in wall / ceiling as per

124 pipe erected with following type of accessories. Pt. 3.00 745.38

[II] For 16A Plug with 2-2.5 sq.mm Cu. Wire

(f) with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete (FRLS) CAT III

Sr. Qty. May More Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. Or Less Rate In FIghure

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated

multistrand copper wires, in following type of to be erected

concealed in / on surface of wall / ceiling complete with Modular

type switch & 5 pin Plug erected on PVC / Metallic box covered with

appropriate front plate modules erected on / in wall / ceiling as per

125 pipe erected with following type of accessories. Pt. 2.00 915.06

[III] For 16A Plug with 2-4 sq.mm Cu. Wire

(f) with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete (FRLS) CAT III

Point wiring for Looped Plug with 6A Modular type switch & 5 pin

socket erected on PVC / Metallic box, single mounting base frame

covered with textured / metallic front plate modules erected on /

in wall / ceiling with following type accessories.

Single mounting base-frame & Textured / Metallic front plates.

Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm

& earth wire of 1.5 sq.mm (green) both are of .ISI marked 1.1 KV

grade FRLS PVC insulated multistrand copper wires, in following

type of pipe to be erected concealed in / flushed on wall/ceiling

,complete with 6A Modular type switches and following type of

accessories erected on PVC / Metallic box, single mounting base

frame covered with textured / metallic front plate modules erected

127 on / in wall / ceiling as per pipe erected. with necessary Pt. 2.00 603.98

batten/angle holder or ceiling rose or H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete Cat-III

Providing following type of Modular Type Accessories mounted with

pvc / metallic box, single mounting base frame covered with

textured / metallic front plate , modules erected with necessary

128 connection. As desired by Engineer In charge Ea. 20.00 25.25

(7) Blank Plate Single Cat-III

Decorative call bell Ting-tong box type 250 volts complete erected

Providing following type of Modular Type Accessories mounted with

PVC / metallic/Wooden box, single mounting base frame covered

with textured / metallic/white front plate , modules erected with

130 necessary connections as per site situation directed by Engineer In Ea. 11.00 160.59

(8) Computer RJ-45 socket cat - III

Providing and erecting ISI mark Medium class RIGID PVC PIPES of

following size complete to be erected on/in wall or ceiling erected

131 with necessary PVC fittings & Junction boxes fixed with adhesive Mtr. 450.00 33.33

solution & Clamps with following dia of pipes, in approved manner

as directed b) 25 mm

Sr. Qty. May More Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. Or Less Rate In FIghure

Providing and erecting ISI mark Medium class RIGID PVC PIPES of

following size complete to be erected on/in wall or ceiling erected

132 with necessary PVC fittings & Junction boxes fixed with adhesive Mtr. 20.00 67.67

solution & Clamps with following dia of pipes, in approved manner

as directed d) 40 mm

Providing & erecting PVC Corrugated Flexible Conduit with required

133 nos. of coupling, PVC bushes, Check-nuts etc. complete of Mtr. 200.00 21.21

following sizes. (2) 25 mm

(A) Supplying and laying UPVC cable trunking system comprising

unplasticised polyvinyl, chloride rigid material with ignition free &

134 flame proof confirming BS .All necessary accessories and measuring Mtr. 70.00 277.75

of following sizes. (1) 75 mm x 50 mm trunking

(A) Supplying and laying UPVC cable trunking system comprising

unplasticised polyvinyl, chloride rigid material with ignition free &

135 flame proof confirming BS .All necessary accessories and measuring Mtr. 300.00 188.87

of following sizes. (3) 50 mm x 50 mm trunking

Mains & Wires

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded

Copper conductor wire in following type of pipe to be erected

concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper

conductor FRLS PVC insulated stranded wire of green colour for

136 earth continuity of following size (general wiring + in street light) Mtr. 1650.00 62.62

(a) with medium class Rigid PVC pipe and accessories

(a) 2 wire 1.5 sq. mm

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded

Copper conductor wire in following type of pipe to be erected

concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper

conductor FRLS PVC insulated stranded wire of green colour for

137 earth continuity of following size (general wiring + in street light) Mtr. 700.00 82.82

(a) with medium class Rigid PVC pipe and accessories

(b) 2 wire 2.5 sq. mm (FRLS)

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded

Copper conductor wire in following type of pipe to be erected in /

on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC

insulated stranded wire of green colour for earth continuity of

following size (FRLS) (a) with medium class Rigid PVC pipe and

accessories (a) 2 wire 4 sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand Aluminium conductor for 1.1 KV. to be laid on wall

139 with necessary clamps or in existing trench / pipe of following size Mtr. 10.00 284.82

(C) 3 1/2 core 50 Sq. mm ( 25 Sq.1/2 mm core)

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand Copper conductor for 1.1 KV. to be laid on wall with

140 necessary clamps or in existing trench / pipe at road crossing or Mtr. 190.00 287.85

floor of following size of cable. (B) 3 core 4 Sq. mm

Sr. Qty. May More Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. Or Less Rate In FIghure

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand / Solid Copper conductor for 1.1 KV. to be laid on

141 wall with necessary clamps or in existing trench / pipe at road Mtr. 15.00 364.61

crossing or floor of following size of cables. (B) 4 core 4 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand / Solid Copper conductor for 1.1 KV. to be laid on

142 wall with necessary clamps or in existing trench / pipe at road Mtr. 305.00 510.05

crossing or floor of following size of cables. (C) 4 core 6 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand Copper conductor for 1.1 KV. to be laid on wall with

143 necessary clamps or in existing trench / pipe at road crossing or Mtr. 155.00 676.70

floor of following size of cables. (A) 4 core 10 Sq. mm

Supplying and erecting Flexible PVC insulated multi strand multi

core 1.1 kv grade ISI marked copper wires of following size to be

144 erected as directed.(e) 1.50 Sq.mm 3 core round PVC sheathed Mtr. 250.00 46.46

Providing and, fixing heavy duty flange type brass cable gland with

rubber ring for PVC insulated armoured cable complete with out

145 going tails, insulating tape etc for following size of cables. Ea. 6.00 33.33

(A) 2 to 4 core 2.5 / 4 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with

rubber ring for PVC insulated armoured cable complete with out

146 going tails, insulating tape etc for following size of cables. Ea. 3.00 38.38

(B) 2 to 4 core 6 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with

rubber ring for PVC insulated armoured cable complete with out

147 going tails, insulating tape etc for following size of cables. Ea. 2.00 38.38

(C) 2 to 4 core 10 Sq. mm

Providing and, fixing heavy duty flange type brass double

compression type cable gland with rubber ring for PVC insulated

148 armoured cable complete with out going tails, insulating tape etc Ea. 2.00 75.75

for following size of cables. (B) 3 & 1/2 core 35/50 Sq. mm

Solder less crimping type Aluminium lugs conforming to IS suitable

for cable of following size evenly crimped with high pressure tool &

149 connected to switchgear terminals with brass/cadmium plated nut Ea. 2.00 15.15

bolts in an approved manner. (C) 16/25 Sq.mm.

Solder less crimping type Aluminium lugs conforming to IS suitable

for cable of following size evenly crimped with high pressure tool &

150 connected to switchgear terminals with brass/cadmium plated nut Ea. 6.00 20.20

bolts in an approved manner. (D) 35/50 Sq.mm.

Sr. Qty. May More Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. Or Less Rate In FIghure

Solder less crimping type Copper lugs conforming to IS suitable for

cable of following size evenly crimped with high pressure tool &

151 connected to switchgear terminals with brass/cadmium plated nut Ea. 36.00 8.08

bolts in an approved manner. (A) 1.5/2.5 to 6 Sq.mm

Solder less crimping type Copper lugs conforming to IS suitable for

cable of following size evenly crimped with high pressure tool &

152 connected to switchgear terminals with brass/cadmium plated nut Ea. 8.00 10.10

bolts in an approved manner. (B) 10 Sq.mm

Making trench in soft soil of suitable width of 90 cms deep for

laying cable or locating the fault all over the run and backfilling the

153 same and making the surface as normal ground. Mtr. 190.00 55.55

Providing & laying approved make Double walled corrugated pipes

(DWC) of polyethylene(conforming to IS 14930 II )with necessary

connecting accessories of same material at required depth for

laying of cable. below ground / road surface for enclosing cable

and back filling the same to make ground as per original. (A)50 mm

Providing & laying approved make Double walled corrugated pipes

(DWC) of polyethylene(conforming to IS 14930 II )with necessary

connecting accessories of same material at required depth for

laying of cable. below ground / road surface for enclosing cable

and back filling the same to make ground as per original. (C)90 mm

Providing and erecting Approved make Four pole moulded case

circuit breaker having breaking capacity ICU of 25 KA. at

V,having normal current rating up to 25 A to 100A. with Fixed

thermal & magnetic release suitable to work on A.C. supply 50 c/s.

with all internal connections, spreader tinned copper & complete

erected in existing 16 G.M.S. housing. ICS=100% of ICU only

providing and erecting Miniature circuit breaker single pole 6A to

25A suitable to operate on 240 V A.C. system and having breaking

157 capacity 10 KA to be erected in existing box. confirming to IS Ea. 93.00 112.11

8828/1996 with ISI Mark - Cat III

Providing & erecting 415 V MCB Four Pole for Motor & Inductive

Load (C Curve) having 10KA breaking capacity & confirms to IS

158 :8828 in existing box having following capacity (b)40 Amp. Ea. 4.00 668.62

Providing & erecting 415 V MCB three Pole for Motor & Inductive

Load (C Curve) having 10KA breaking capacity & confirms to IS

159 :8828 in existing box having following capacity (a) 6 to 32 Amp. Ea. 2.00 587.82

Providing & erecting 415 V MCB three Pole for Motor & Inductive

Load (C Curve) having 10KA breaking capacity & confirms to IS

160 :8828 in existing box having following capacity (b)40 Amp. Ea. 7.00 647.41

Sr. Qty. May More Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. Or Less Rate In FIghure

Providing and erecting Sheet Steel powder coated MCB distribution

board - flush / surface mounted fitted with busbar, neutral link,

earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 &

without MCB to house appropriate nos. of MCBs.(The DBs should be

161 used of same company of MCB to be used) suitable for (A) single Ea. 2.00 1,152.41

phase incoming and horizontal single phase outgoing (b) sheet steel

double door (IP-43) (iii)8 way

Providing and erecting Sheet Steel powder coated MCB distribution

board - flush / surface mounted fitted with busbar, neutral link,

earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 &

without MCB to house appropriate nos. of MCBs.(The DBs should be

used of same company of MCB to be used) suitable for (B) three

162 phase incoming and single phase horizontal type outgoing Per Ea. 4.00 2,913.85

phase isolation type (PPI) (b) sheet steel double door (ii)6 way

Providing and erecting Sheet Steel powder coated Vertical MCB

distribution board (VTPN) - flush / surface mounted double door

(IP54) fitted with copper insulated busbar, isolated neutral bar, earth

bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 &

163 suitable for 63/100 AMP TPN MCCB + RCCB as incomer and three Ea. 0.00 8,402.19

phase outgoing as per following .(The DBs should be used of same

company of MCB to be used) (C)8 way outgoing

Providing and erecting Sheet Steel powder coated Vertical MCB

distribution board (VTPN) - flush / surface mounted double door

(IP54) fitted with insulated copper busbar, isolated neutral link,

earth bar and DIN rail, confirming to IS 13032 and BS 5486-1986,IP-

54 suitable for 63/100 AMP TPN MCCB + RCCB as incomer and

164 three phase outgoing as per following .(The DBs should be used of Ea. 1.00 18,663.60

same company of MCB to be used)

(D)12 way outgoing

providing and erecting Approved make RCCBs conforming to IS:

12640 and having sensitivity of 30 mA and Short Circuit withstand

capacity of 10 KA and suitable for operation on single phase

V,50Hz. having characteristic of quick action & tripping with all

165 advance feature & do not incorporate any electronic component. for Ea. 8.00 1,969.50

following Max. rating erected as directed (i) 25 Amps.DP Cat. III

Supplying & erecting approved make IP 55 grade Company

fabricated Timer Panel of following capacity for switch On-Off

street lights on time scheduling basis made from 16G CRCA sheet

duly epoxy power painted inside and outside with hinged doors and

locking arrangement consisting of suitable size of 4 Pole MCB and

166 pole contactor (cat-III)with analog time switch, auto manual switch Ea. 1.00 12,399.77

of same make and suitable input and output Bakelite terminals and

with door earthing approved by Engineer in charge.(A) 32 Amp

Sr. Qty. May More Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. Or Less Rate In FIghure

providing and erecting Approved make RCCBs conforming to IS:

12640 and having sensitivity of 30 mA and Short Circuit withstand

capacity of 10 KA and suitable for operation on single phase

V,50Hz. having characteristic of quick action & tripping with all

167 advance feature & do not incorporate any electronic component. for Ea. 6.00 2,235.13

following Max. rating erected as directed (ii) 40Amps. DP Cat. III

Supplying and erecting LED indoor fittings with LEDs of wattage

Watt to 0.5 Watt assembled on single MCPCB, with housing used as

a heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/ aluminium die cast powder coated and high U.V. &

corrosion resistance with diffuser with company mark/name 160V

to 270V, Power Factor more than 0.95, THD < 15%,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED

168 LED driver efficiency > 85 % Nos. 10.00 295.93

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

between the ranges shown.) (iii) 18-20 Watts, Surge - 2KV,IP-20,

conventional 4 feet Cat-lll

Supplying and erecting LED indoor fittings with LEDs of wattage

Watt to 0.5 Watt assembled on single MCPCB, with housing used as

a heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/aluminium pressure die cast powder coated and high

U.V. & corrosion resistance with diffuser housed in aluminium

casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

169 ( fitting required LM-79 & LM-80 Certificates)(NOTE: Below Nos. 11.00 220.18

description have shown ranges of Wattage capacity of LED

between the ranges shown.) (A) Circular shaped Surface/Recessed

Mount Downlight with provision for spring loaded mounting clips

complete.IP20 (i) 9 watts,Surge-2 KV Cat-lll

Sr. Qty. May More Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. Or Less Rate In FIghure

Supplying and erecting LED indoor fittings with LEDs of wattage

Watt to 0.5 Watt assembled on single MCPCB, with housing used as

a heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/aluminium pressure die cast powder coated and high

U.V. & corrosion resistance with diffuser housed in aluminium

casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

170 ( fitting required LM-79 & LM-80 Certificates)(NOTE: Below Nos. 29.00 427.23

description have shown ranges of Wattage capacity of LED

between the ranges shown.) (A) Circular shaped Surface/Recessed

Mount Downlight with provision for spring loaded mounting clips

complete.IP20 (ii) 11 watts, Surge-2 KV Cat-lll

Supplying and erecting LED indoor fittings with LEDs of wattage

Watt to 0.5 Watt assembled on single MCPCB, with housing used as

a heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/aluminium pressure die cast powder coated and high

U.V. & corrosion resistance with diffuser housed in aluminium

casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

171 ( fitting required LM-79 & LM-80 Certificates)(NOTE: Below Nos. 87.00 758.51

description have shown ranges of Wattage capacity of LED

between the ranges shown.) (A) Circular shaped Surface/Recessed

Mount Downlight with provision for spring loaded mounting clips

complete.IP20 (iv) 24 watts, Surge-2 KV Cat-lll

Supplying and erecting LED street light / Flood light fittings with

High power White LEDs wattage of 3 Watt and above assembled on

single MCPCB, efficiency more than 130 lm/w and corrosion free

High pressure die cast aluminium housing with smooth finish

powder coated and heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses with company mark/name engraved or

embossed 160 to 270 V,Power Factor more than 0.95, THD < 10 %,

CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy>

100 lumens/watt . LED driver efficiency > 85 %.( fittings required

172 LM-79 & LM-80 certificates)(NOTE: Below description have shown Nos. 10.00 2,201.80

ranges of Wattage capacity of LED fittings.The Engineer incharge

Street Light (IP-65), Surge protection -4KV integral and ,Light must

have 440VAC line supply with over-voltage protection. (iii) 36 watts

Sr. Qty. May More Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. Or Less Rate In FIghure

Providing and erecting PVC body surface or pendent mounting LED

Bulk type 9 watt Lighting Fitting with electronic driver. And lumen

output from luminaire 720lm , input voltage range 90-300VAC

173 50Hz cool white(3000 to 6500k), inbuilt driver, -20degC to Nos. 5.00 787.80

+60degC working temperature, AL frame with Beam Angle 120deg

Supplying & erecting Galvanized M.S pipe post “B” class 88.9 mm

O.D 4 mtr. Long duly painted with two coats of aluminium paint

174 complete with metallic base plate of 300 mm x 300 mm x 4mm Nos. 10.00 3,225.94

thick for using as a compound light pole with approx. weight 32 Kg.

Providing and erecting street light pole bracket comprising main B

Class MS pipe of 4.2 cm/require outside dia. complete with suitable

B Class M.S. sleeve tubing of approx. 45cms.length and suitable for

76.5 mm / 80mm. / require size pole top having sufficient fasteners

for fixing the brackets and having spread of 1 mtr. length with

suitable rise as per site condition & suitable welded stiffener reducer

175 and nipple with check nut complete painted with one coat of Red Nos. 10.00 561.56

oxide / PU base primer and two coats of Aluminium / PU paint.

paint with following nos of arms. [A] Single Arm bracket 1 Mtr

Providing & erecting approved make street light / wall mounting

junction box compression moulded from SMC (thermoset plastic)

vertical sliding cover having locking with square head stud loop in /

loop out in built terminal suitable for four core cable, waterproof of

I.P. 54 protected with clamp or bolt nut & earth bolt of following

size. (B) 250mm x 194mm x 99 mm

Providing 1:2:4 cement concrete foundation & 70 % PCC from

bottom including excavation for the pole of size 45 x 45 x 100 cm.

Deep in below ground level with plinth of 45 cm x 45 cm (or 45 cm

177 dia x 45 cm) high upper ground level with necessary curing and Nos. 10.00 809.01

finishing in approved manner. ( for 4 & 6 mtr pole)

Providing & erecting Approved make Power Saving 50 Watt Ceiling

Fan with double ball bearing ISI mark with Condenser 230 volt A.C.

50 Hz 1200 mm sweep complete having 3blades with aluminium

178 blades with , canopy & 30 cm. down rod erected with Nos. 26.00 1,948.29

earthing.(Make shall be approved by Engineer in charge)

Supplying & erecting fan hook box of 10 mm M.S. round bar

bounded to the RCC bars up to 50mm length each side and pierced

179 through a 16 Gauge M.S. box / Heavy Duty PVC box complete Nos. 26.00 108.07

erected concealed in Ceiling with necessary finishing.

Providing 2.5mm.thick laminated acrylic sheet to cover the fan hook

180 or Fan box. Nos. 26.00 18.18

Supplying & erecting approved make low noise decorative exhaust

181 fan having square frame ABS body with inbuilt lowers & square Nos. 9.00 1,366.53

frame. 250mm with 1350 RPM Cat.II

Sr. Qty. May More Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. Or Less Rate In FIghure

Providing and erecting required size HOT deep Galvanised iron strip

182 for earthing of H.T. , OCB/ ACB/ Transformer LT panel board, Kg. 100.00 77.77

Motors etc. using proper clamp.

Providing and erecting required size Copper strip for earthing of

183 H.T. OCB / ACB/ Transformer, LT panel board, Motors etc. using Kg. 50.00 794.87

copper clamp.

Providing and erecting HOT deep Galvanised iron strip wire 8 to

184 SWG.Using for DB earthing wire 8 to 16 SWG. Kg. 50.00 77.77

Supplying & erecting in earthpit of minimum bore dia. 225mm size

approved make Safe Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of corrosion free hot dipped

G.I.Pipes having Outer pipe dia of 80 mm having 80-200 Micron

galvanising, Inner pipe dia of 40 mm having 200-250 Micron

galvanising, connection terminal dia of 14 mm with constant

ohmic value surrounded by highly conductive compound with high

charge dissipation suitable for following type of applications with

chamber and heavy duty cover (A)(approved make OEM has to

submit test certificate including value of earth resistance of

installation duly stamped and signed by agency and officer Incharge

has to ensure the value of earthing resistane mentioned in test

Certificate) & having back filling compound of (B) Inner chemical

(CCM Compound)- Resistivity:- 0.2 ohm / meter testing as per IEC

185 62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar Ea. 3.00 7,095.25

content:- <2%(C) Back fill Compound :- Earthing compound should

be capable to retain moisture for long time Necessary test report

must be submitted by Agency. [B] For Electrical installation up to

KV located in other than normal soil i.e. Soft Rock, Marshy

-Length of Pipe : 2 mtr

-Back filling Compound :1 no. Bag of 25 Kg.

Sr. Qty. May More Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. Or Less Rate In FIghure

Supplying & erecting in earthpit of minimum bore dia. 225mm size

approved make Safe Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of corrosion free hot dipped

G.I.Pipes having Outer pipe dia of 80 mm having 80-200 Micron

galvanising, Inner pipe dia of 40 mm having 200-250 Micron

galvanising, connection terminal dia of 14 mm with constant

ohmic value surrounded by highly conductive compound with high

charge dissipation suitable for following type of applications with

chamber and heavy duty cover (A)(approved make OEM has to

submit test certificate including value of earth resistance of

installation duly stamped and signed by agency and officer Incharge

has to ensure the value of earthing resistane mentioned in test

Certificate) & having back filling compound of (B) Inner chemical

(CCM Compound)- Resistivity:- 0.2 ohm / meter testing as per IEC

62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar

186 content:- <2%(C) Back fill Compound :- Earthing compound should Ea. 1.00 10,593.89

be capable to retain moisture for long time Necessary test report

must be submitted by Agency. [C] For Electrical Installation covering

Transformer Neutrals, Lightning arrester Earthing, A.C.Plant &

Sensitive Computer System(like Automation, SCADA)i.e.

independent Earthing located in other than normal soil i.e.

Soft Rock, Marshy Soil etc..

-Length of Pipe : 3 Mtrs.

-Back filling Compound :2 nos Bags of 25 Kg.

Supplying & erecting approved make LAN cable of following size in

187 existing pipe as per direction. [C] CAT - 6 RMT 1190.00 47.47

Supplying and erecting approved make online Un-interruptible

Power Supply system comprising flat cum-boost charger with IGBT

base rectifier & Inverter & sealed maintenance free SMF batteries.

The charger having operating capacity for input 160-270V AC &

inverter having output 230V,50 Hz Ac with 0.8 load power factor

with battery, over/under voltage output with over load & short

188 circuit protection equipment. The system housed in CRC sheet duly Nos. 1.00 82,941.20

powder coated paint with following power backup.with MS painted

batteries stand, 10% Overload capacity for momentary load. (C)

KVA with 1Hr Backup

Providing and erecting water cooler having storage capacity 80Ltr. &

cooling capacity 40 Ltr.per hour @ an ambient temp of 45˚ C. The

outlet temp. of the water should drop by 15˚ C within a hour, The

water cooler should be comprising of hermetically sealed

compressor, fan motor, condensing unit, water tank surrounded by

189 evaporating coil, thermostats, relay etc. complete with necessary Ea. 1.00 49,559.69

inlet & outlet connection. The body of water cooler will be made

from Stainless Steel. ◦

Sr. Qty. May More Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. Or Less Rate In FIghure

Supplying & erecting 5 stage single reverse osmosis water

purification system with M.S. powder coated frame, prefilter

housing with 'O' ring presediment filter GAC filter, carbon filter

suitable buster DC pump capacity 80 psi, mention with 40 psi inline

190 type post carbon filter auto low & high pressure switches with Ea. 1.00 29,187.99

following size of storage tank & LPH capacity & erected as directed

[C] 50 Ltr / Hr with 150 psi 2 nos booster pump

Providing Water proof straight Joint in PVC insulated flat flexible

copper cable by using insulating material, water proofing material,

191 & making the joint complete. (A) Up to 10Sq. mm Ea. 10.00 189.88

SITC OF DOME TYPE CAMERA - 4MP IPCP-UNC-DA41L3C-D-Q

CPPLUS MAKE AS PER SPECIFICATIONS : 1/2.9” 4MP PS CMOS Image

Sensor (0.8758 centimeters) Max. 4MP (2688 × 1520)@1-25/30fps/

(2560 × 1440)@1-25/30 Instastream, H.265, H.264, H.264H,

H.264B, MJPEG Support Triple stream WDR (120dB), Day/Night(ICR),

192 3D NR, AWB, AGC, BLC, HLC, Digital watermarking3.6mm fixed Lens Nos 13.00 4,156.15

Support Built-in Mic IR Range of 30 Mtr., IP67, PoE complete with

rj45 connector crimping, PVC back box

SITC OF BULLET TYPE CAMERA - 4MP IPCP-UNC-TC41L5C-VMD-LQ

CPPLUS MAKE AS PER SPECIFICATIONS : 1/2.7" 4MP PS CMOS Image

Sensor (0.9407 Centimeters) Max. 4MP (2688 × 1520)@1-

25/30fps/ (2560 × 1440)@1-25/30 Instastream, H.265, H.264,

H.264H, H.264B, MJPEG Support Triple stream WDR (120dB),

193 Day/Night(ICR), 3D NR, AWB, AGC, BLC, HLC, Digital Nos 6.00 8,080.00

watermarking3.6mm fixed Lens Support Built-in Mic IR Range of

Mtr., IP67, PoE complete with rj45 connector crimping, PVC back

SITC OF 32 CHANNEL NVR - CP-UNR-4K4322-V4 - 2 SATA - CP

PLUS MAKE - 32 Ch. 4K Network Video Recorder AS PER

SPECIFICATIONS : Up to 32 channel IP camera input Max. decoding

capability: 8 × 1080p@30 fps, 2 × 8 MP@30 fps Smart

Instastream/H.265/H.264 /MJPEG Max. 160/128/60 Mbps

incoming/recording/outgoing bandwidth Support 2 SATA HDDs up

194 to 20TB, 2 (1 front USB 2.0 port, 1 rear USB 2.0 port) HDMI / VGA Nos 1.00 18,180.00

simultaneous video output Support Multi-brand network cameras

ONVIF Version 2.4 conformance Mobile Software: iCMOB, gCMOB

CMS Software: KVMS, KVMS Pro Lite

Supply Installation Testing & Commissioning of 4TB Surveillance

195 Harddisk Nos 1.00 13,352.20

Sr. Qty. May More Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. Or Less Rate In FIghure

SITC OF 16PORT POE NETWORK SWITCH - SG1218MPE TPLINK AS

PER SPECIFICATIONS : 16× PoE+ gigabit RJ45 ports, 2× combo

gigabit SFP slots.

PoE power budget is up to 250 W, making it ideal for small to

medium business surveillance systems. Port Priority is able to

guarantee the quality of sensitive application like video monitor. PoE

196 Auto Recovery automatically reboots your dropped or unresponsive Nos 3.00 15,150.00

PoE-powered devices.

Intelligent power management protects the switch from overload.

QoS ensures smooth traffic for latency sensitive applications. IGMP

Snooping optimizes multimedia traffic delivery, such as IPTV.

SITC of Dual Band Wireless Cable Router, Wi-Fi Speed Up to

Mbps/5 GHz + 300 Mbps/2.4 GHz, Supports Parental Control, Guest

197 Wi-Fi, VPN - TP-Link Archer C50 AC1200 or equivalent Nos 2.00 3,030.00

SITC OF 43" LED monitor / TV - NEXTVIEW MODEL NO. Nv2fh43s9

SITC OF 15U NETWORK RACK - Power Strip with necessory sockets,

199 mounting trays, exhaust fan complete with accessoreis - 600 X Nos 1.00 9,595.00

600MM approx. size -- Elirix make

Supplying & erecting Philips / Ahuja / CKS make PA Ceiling speaker

input Power:8 Watt RMS Power Taps:8/4/2W on 100 V

200 Freq.Responce:60-15,000Hz, SPL (1w/1m):92db,Dim./Wt: ø 227 X Nos 20.00 2,222.00

H77mm/0.78kg, Model no.CS-6081T

Supplying & erecting Philips/ Ahuja / CKS make Amplifier having

following specification:

Power Output :250W (RMS) (300W Max.), inputs : 6 Misc. & 2 Aux.,

frequency Response :50-1500HZ I3db, Tone, Controls :Cut & Boost

type, LED Meter : 5 LED Arrays, The amplifier suitable to operate

201 240V A.C.& 24volt D.C. (Battery) with automatic changeover from Nos 1.00 22,725.00

AC to Battery operation, duly protected by wrong Battery Polarity

connections.

Sr. Qty. May More Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. Or Less Rate In FIghure

Supplying & erecting Mixing Console having channels, Audio mixer

with. Echo facility for live performance, Auditorium & stadiums,

having following features & facilities. (a)input Channels :- Each

channel has separate

6.25mm size balanced phone jack for mike & line for balanced &

unbalanced signals (b)Individual gain control for sating optimum

level for minimum noise (c)BASS, MID & TREBLE ‘ controls Separately

for each input channel (d)ECHO control for each channel (e)PAN

control for echo channel for left or right output (f) AUX Control : To

control , level of the channel in final mix to AUX sound output

(g)Channel ON/OFF switch (h)ECHO Section :- ECHO, reverb &

Chorus effect can be added to all input channel by different setting

of Delay, Reverb & Level control (i)Tape section (j)Aux. send & return

For sending Pre-feeder output of channel for monitoring or adding

a special effect unit (k)Mono / Stereo output controls (m) Head

phone output for monitoring purpose.

Technical specification:

(a)Power Requirement -AC220-24OV 50 Hz DC 24 Volts (b)MIC

202 Output Impedance/gain -2 K Ohms/ 62 dB (c)Line Output Nos 2.00 38,632.50

Balance/42 dB —- 20 K ohms (d) Impedance / Gain :- 10Kohms

unbalance / 42 dB (e)frequency Response - 30 Hz- 20 KHz L / R

Line Output ( + 0, -1 dB ) (f)Equalization Bass/ - + / - 12 dB at

100Hz Mid / Treble 2 KHz / 10 KHz (g) Outputs, Line Output Line

Output Low : -10 dB / -2 dBM , Line Output High : 0 dBM / +17

dBM (775 mv / 5.5 V ) (h) S/N ratio Line Output Level : > 70 dB (0

dB, 0.775V) The Console shall be mounted on standard Rack,

The channel of following numbers. (A) 14 Channel Audio Mixer with

Supplying and erecting Philips / Ahuja / CKS make Weather & Dust

resistant sound column with Aluminium case & Aluminium mesh

taps / impedance having frequency response 150-20000 Hz with

following specifications (b) With 2 speakers having power handling

203 capacity of 23W(MAX) & 15 W (RMS), each speaker have impedance Nos 2.00 5,050.00

of respectively 670 ohms/ 15W, 1 K.ohms/

10W, 2K.ohms / 5W & 4 K. ohms / 2.5W

Supplying and erecting Boss/ Philips / Ahuja / CKS make Weather &

Dust resistant ceiling/ wall mounted sound speaker with decorative

case & mesh grille with foam layer under grill, rotary- switch for

20000 Hz with following specifications (b) With 2 speakers having

204 power handling capacity of 23W(MAX) & 15 W (RMS), each speaker Nos 4.00 7,575.00

have impedance of respectively 670 ohms/ 15W, 1 K.ohms/ 10W,

2K.ohms / 5W & 4 K. ohms / 2.5W

Sr. Qty. May More Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. Or Less Rate In FIghure

Gooseneck Condenser Microphone with Base Ahuja Model No. GM-

205 605, GMB-6C or equivalent in Bosch /Shure etc. Nos 1.00 11,110.00

206 SPEAKER WIRE Mtr 500.00 85.85

Providing and erecting Inverter based approved make split air-

conditioning unit consisting of condensing unit with variable speed

fan motor, inverter type hermetically sealed rotary compressor with

accessories etc. duly connected separately erected evaporating unit

and blower motor with its accessories by means of extra supplied

proper insulated copper tubing,drain PVC pipes suitable for ( cost

207 includes Eco Friendly green gas charging and 15A plug top & Each 2.00 56,353.96

Remote Control & MS Stand) with necessary core cutting. (1)For

ISEER Range (KWH/KWH)(3.1 to 3.99) (C) for 1.7 to 2 ton capacity -

Premium Cat.

Liaisoning work for additional load for requirement, electrical power

connection charges and inspector approval for power(to be paid to

208 concern electrical power supplier company) Lot 1.00 50,500.00

Conventional type Smoke detector having following specifications :

Dual LED’s for 360 visibility. Advanced detection and

communication protocol. Easy installation and maintenance.

Sleek low -profile housing design.Regular 100mm Base. EN-54

Standard. Operating Voltage : 10 ~ 28V DC. O O Operating

209 Temperature : 0 C to 37.8 C. Relative Humidity : 10% to 90% Nos 18.00 1,146.35

Reset Voltage : less than 1V. Stand by Current : 85 Micro Amps.

Start Up Time : 30 Seconds.

Cycle time : 28 - 35 Seconds. Alarm Current : 60 mA (Max.). Remote

Output : 15mA maximum open collector. Smoke Sensitivity : 0.10 to

0.16 dB/m. Thermal

Conventional Rating

type Fire :

Alarm C(135

Panel F). complete

having Followingwith Junction :

specifications

CE Approved. 16 X 2 Dot Matrix LCD Display. Standby battery

backup with built in charging. Switch Mode Power Supply. Tactile

eypad for easy panel operation. System ON indication. Low Battery

visual warning with audible ton. Fire / Fault status in unambiguous

colored LED indication. 2 programmable relays for fire,supervisory

and fault. All zones accept smoke detectors and any normally open

contact device. Any Zone can be configured as alarm or supervisory.

Zone wise isolation and one man walk test facility. Programmable

Aux Outputs. Lamp test & Drill test facility. 100 All Events log with

RTC. Date / Time / Password configuration. Programmable auto

210 silence facility. Zone wise sounder / contact optional). TCP-IP / Nos 1.00 9,595.00

GSM facility (optional). 120 / 230VAC + 10% -15%, 60 / 50 Hz, 50W

Operating Temperature 0 – 49° C / 32 – 120° F. Storage

Temperature 0 – 60° C Relative Humidity 93 ± 2% RH (non-

condensing) at 32 ± 2° C / 90 ± 3° F Charging voltage Charging

current 28 V ± 5% 350mA (max) - RAVEL Make cat no. RE-102R

SITC of Hooter / Sounder as per following specifications : Operating

Voltage : 24V DC Operating Current : 40mA Sound Level : 85dB@1m

Operating Temperature : 0 – 49° C / 32-120° F. Sounder Type :

211 Piezo Electric Type Tone Type : Fire Engine Siren Material : ABS Nos 3.00 949.40

Plastic Colour : Red Dimensions : 96 H mm X 76 L mm X 28 D mm

Back Box : 95 H mm X 75 L mm X 58 D mm Mounting Type : Surface

/ Flush Mount complete with Back Box - RAVEL make cat no.

Sr. Qty. May More Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. Or Less Rate In FIghure

SITC of Manual Call Point as per following Specifications : Operating

Voltage : 24VDC Operating Current : 30mA Colour : Green / Yellow

212 / Red Material : Plastic IP Rating : IP-50 Size : 86 X 86 X 50 mm - Nos 3.00 808.00

RAVEL make Cat no. RE716 MR

Supplying, Installation, Testing and commissioning of Jockey Pump

10.8M3/hour @70M Head.Horizontal Centrifugal End Suction. with

M.S.fabricated common base plate, coupling, coupling guard,

213 foundation bolts etc. for motor and details pump specificaion follow No. 1.00 1,19,041.95

as per specification as mentioned in tender volume..

Providing, fixing, testing & commissioning of Pressure Switches for

automation of fire pumps. Pressure switches shall be double pole

single throw type suitable for 3 phase supply with diaphragm.

214 Aluminum Enclosure with IP 66 protection follow as per Nos. 2.00 2,400.47

specification as mentioned in tender volume..

Supplying, Installation, Testing and commissioning of C.I.Butterfly

valve conforming to I.S:13095 class PN 16 rating with Fittings,

215 Flanges, Nutbolts, Washers, Gaskets etc. follow as per specification Nos. 2.00 10,090.94

as mentioned in tender volume..

of size: 150mm dia.

Supplying, Installation, Testing and commissioning of C.I.Butterfly

valve conforming to I.S:13095 class PN 16 rating with Fittings,

216 Flanges, Nutbolts, Washers, Gaskets etc. follow as per specification Nos. 2.00 6,107.98

as mentioned in tender volume..

of size: 100mm dia.

Supplying, Installation, Testing and commissioning of C.I.Ball type

Foot valve conforming to I.S:13095 class PN 16rating with Fittings,

Flanges, Nutbolts, Washers, Gaskets etc. follow as per specification

217 as mentioned in tender volume.. Nos. 2.00 18,533.30

of size: 150mm dia.

Providing, fixing, testing and commissioning of C.I. Dual plate type

218 Non-Return Valve class PN 16 rating with fittings, flanges, nutbolts, Nos. 2.00 11,041.19

washers, gaskets etc.of sizes: 150mm dia

Providing, fixing, testing and commissioning of Above Ground MS.

ERW Black C Class Heavyduty pipes as per IS: 1239 (upto 150 mm

dia.) and IS: 3589 (upto 200 mm dia. And above) including cutting,

screwing, welding etc. and providing all fittings like flanges, bends,

tees, elbows, reducers, clamps, hangers etc. with painting of one

219 coat of primer and 2 or more coats of synthetic enamel paint of Meter 10.00 2,391.95

approved make / shade complete as per specification. 150mm dia

Providing, fixing, testing and commissioning of Above Ground MS.

ERW Black C Class Heavyduty pipes as per IS: 1239 (upto 150 mm

dia.) and IS: 3589 (upto 200 mm dia. And above) including cutting,

screwing, welding etc. and providing all fittings like flanges, bends,

tees, elbows, reducers, clamps, hangers etc. with painting of one

220 coat of primer and 2 or more coats of synthetic enamel paint of Meter 10.00 1,744.20

approved make / shade complete as per specification. 100mm dia.

Sr. Qty. May More Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. Or Less Rate In FIghure

Providing, fixing, testing and commissioning of Under Ground M.S.

ERW Black C Class Heavyduty pipes as per IS: 1239 (upto 150 mm

dia.) and IS: 3589 (upto 200 mm dia. And above) with IWL/pypecoat,

4mm thickness wrapping and coating and providing all fittings like

221 Meter 30.00 3,265.73

flanges, tees, elbow, fasteners with all follow as per specification as

mentioned in tender volume.. 150mm dia

Providing, fixing, testing and commissioning of RRL Fire delivery

hose 63 mm Dia in 15 mtrs length with ISI MARKS is 636 type ‘A’

Fitted with Stainless Steel male & female coupling ISI Mark IS :903

222 duly binned with copper wire winding follow as per specification as Nos. 4.00 6,502.28

mentioned in tender volume..

Providing, fixing, testing and commissioning of weatherproof

standard fire Hose Cabinet wall mounting type 18 Gauge. (750 x

600 x 250) having Double Opening with M.S. fabricated stand,

223 necessary lock & key arrangement follow as per specification as Nos. 2.00 6,189.79

mentioned in tender volume..

Providing, fixing, testing and commissioning of CI Two way Fire

Brigade Inlet as per IS: 904 having 63 mm dia inlet with 100 mm dia

Butterfly valve blank cap and chain with necessary fittings, flanges,

224 nutbolts etc. (For System filling & Tank Filling) follow as per No. 1.00 7,043.13

specification as mentioned in tender volume..

Providing, fixing, testing and commissioning of Wall mounting Fix

type First aid Fire Hose Reel with 30 Mtrs Rubber Hose 25mm Dia IS

225 : 444 Type II fitted wit SS Shutt off Nozzle follow as per specification Nos. 2.00 10,877.20

as mentioned in tender volume..

Providing & Installation of ABC Stored Pressure Type Fire

Extinguisher 6 Kgs. capacity bearing ISI Mark for Fighting ABC Class

226 of Fire. The Extinguisher will be Manufactured Strictly as per BIS: Nos. 5.00 2,355.72

15683:2006 bearing ISI. Mark follow as per specification as

mentioned in tender volume..

Providing & fixing of Co2 type Fire Extinguisher 4.5Kgs. Capacity,

made from the brand new seamless cylinder, as per IS: 7285 and

CCE approval, fitted with a Discharge hose and horn and wheel type

227 valve with initial Charge as per IS: 15683:2006 specification, bearing Nos. 5.00 5,456.63

ISI Mark follow as per specification as mentioned in tender volume..

Providing & fixing Modular type ABC Dry Powder Fire extinguishers

5 litre capacity Fire Extinguishers. The Extinguisher will be

228 Manufactured Strictly as per BIS: 15683:2006 bearing ISI. Mark Nos. 5.00 4,447.03

follow as per specification as mentioned in tender volume..

Providing, fixing, testing and commissioning of On -Off Switch

229 follow as per specification as mentioned in tender volume.. Nos. 2.00 408.65

Providing, fixing, testing and commissioning of Manual Call Point

follow as per specification as mentioned in tender volume..

Sr. Qty. May More Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. Or Less Rate In FIghure

Providing, fixing, testing and commissioning of Hooter follow as per

specification as mentioned in tender volume..

Providing, fixing, testing and commissioning of below Auto Glow

Signages follow as per specification as mentioned in tender

232 volume.. Emergency Exit 4” X 12” Nos. 4.00 233.17

Providing, fixing, testing and commissioning of below Auto Glow

Signages follow as per specification as mentioned in tender

233 volume.. Fire Fighting Equipements .8” X 12” Nos. 4.00 406.24

Providing, fixing, testing and commissioning of below Auto Glow

Signages follow as per specification as mentioned in tender

234 volume.. Fire Extinguisher 4” X 12” Nos. 2.00 233.17

APPROVAL FIRE SYSTEM FROM LOCAL FIRE AUTHORITY

Getting of Fire Fighting System Approval from local fire authority

with all other charges and documentations for getting No Objection

Certificate.(as per GMB Approved rate)

Providing & fixing laminate finish partition up to false ceiling ht

(thickness of partition is 82 mm or as specified in drawing) having

12 mm thick marina plywood IS 710 grade both side on aluminum

framing of gauge 16. Aluminum framing size for vertical &

horizontal support is 50 mm x 25 mm. Grid of aluminum framing

is 600 mm x 600 mm. All exposed surfaces finished with 1 mm

thick Laminate of approved shade complete with mat finish.

Necessary framing to be erected above false ceiling. No extra cost

to be paid for the same. Before installation, make hole/face plate for

conduit pipes of electrical / networking cables with open able stud

from partition Including all materials and labor etc. Make necessary

236 grooves as per shown in drawing. Using of 12 mm thick clear glass Sqm 4.00 6,495.31

with proper crystal edges & with suggested frosted films on glass.

All joints are covered with teakwood beading Patti finished with

polish matching with laminate. Including door of same design if

required Complete with all necessary hardware & adhesives as per

details given in drawing and as per instructions of

Architect/consultant/Engineer In charge. Contractor has to provide

all necessary cut outs (race ways.) for Electrical works & no extra

payment shall be made for it.

Sr. Qty. May More Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. Or Less Rate In FIghure

Providing and fixing eco-friendly light weight calcium silicate false

ceiling tiles having Tegular edge & 15 mm Thick Densified edges on

the Tile Periphery for Extra Strength The Light weight calcium

silicate ceiling tiles shall have , light reflection 85% noncombustible

as per B.S. 476 part IV, 100% humidity resistance and also having

thermal conductivity0.043° w/m KC.for the best thermal Insulation .

The Light weight calcium Silicate tile shall be of approved texture

Fine fissured/ Spintone/Cosmos having NRC value of 0.5 & Globe

having NRC value of 0.75 NRC or equivalent of size 595 X 595 mm

to be laid on true horizontal level suspended inter locking metal

grid of hot dipped galvanized steel sections (galvanizing @120

grams per sqm at joints to get required length and size of

24X38mm made from 0.30 mm thick (minimum) sheet, 1200mm

centre to centre, and centre to centre to form agrid of

1200X600mm and secondary thick (Minimum) sheet to be

interlocked at middle of the 1200X600mm panel to form grid of

size 600X600mm resting on periphery walls/partitions on a

perimeter wall angle pre-coated steel of size (24X24X3000mm

made of 0.40mm thick (minimum) sheet with the help of rawl plugs

at 450mm centre to centre with 25mm long dry wall screws @

230mm interval and laying 15mm thick Densified edges light weight

calcium silicate ceiling tiles of approved texture (Fine

Fissured/Cosmos/Spintone) in the grid

Providing & fixing work station / table having ht of 750 mm Top,

with MS Pipe Structure of Frame as per Architect/ Engineer Design

table is also made up of 19mm Thick. Top of Table is 19mm thk ply

with laminate Finish Per Requirement and All internal & external

Joints finished with teakwood beading Patti. Common or front Part

of Table is Sectationized with MS Perforated Sheet. All exposed and

internal surfaces covered with Laminate Finish of approved shade &

Complete as per detail drawings & as instructed by

238 Architect/consultant/ Engineer In charge. Complete with all Sqm 42.00 24,075.36

necessary hardware like nails, ss screws, table chain, Key board trey,

TDS channel, adhesives etc. Contractor has to provide all necessary

cut outs for Electrical works & no extra payment shall be made for

Sr. Qty. May More Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. Or Less Rate In FIghure

Providing & fixing office table / staff table having ht of 750 mm

Top, with 19mm thk plywood or MS pipe Structure as per

table is also made up of 19mm Thick. Top of Table is 19mm thk ply

with laminate Finish Per Requirement and All internal & external

Joints finished with teakwood beading Patti. Item includes fixing of

drawers and keyboard tray and storage with shutters under table as

per drawing. With grooves shown as per drawing. All exposed and

internal surfaces covered with Laminate Finish of approved shade &

239 Complete as per detail drawings & as instructed by Sqm 8.00 28,933.49

Architect/consultant/ Engineer In charge. Complete with all

necessary hardware like nails, ss screws, table chain, TDS channel,

adhesives etc. Contractor has to provide all necessary cut outs for

Electrical works & no extra payment shall be made for it. All ply

should follow IS

Open Storage Rack (Laminate FINISH)

Providing & fixing Any ht storage having depth of

350mm/450mm/600 mm, having skirting of 75 mm, including

vertical supports & horizontal shelves shown as per drawing made

by 19 mm thick Marin ply, Open Front Side for Selves with using

mm thick Marin ply for framing. All complete with proper teakwood

beading and Teakwood molding as per design. Back ply is 12 mm

Marin ply. All exposed are covered with 1 mm thick Laminate &

internal surfaces are covered with 1 mm thick laminate. External &

240 internal joints covered with beading Patti complete with polish Sqm 60.00 10,135.53

finish. With grooves shown as per drawing. All complete with proper

hardware like, S.S. Screws, MS Nails, Magnets, cable manager SS

304 etc. All Details as per shown in detail drawings & as per

instructions of architect/consultant / in charge engineer

Storage with Shutter (Laminate FINISH)

Providing & fixing Any Height storage having Any size of having

depth of 350mm/450mm/600 mm, having skirting of 75 mm, with

proper locks. includinf of vertical supports & horizontal shelves

shown as per drawing made by 19 mm thick Marin ply, having

shutters of 19 mm thick ply or Clear Glass with using 12 mm thick

Marin ply for framing. All complete with proper teakwood beading.

and Teakwood molding as per design. Back ply is 12 mm Marin ply.

All exposed are covered with 1 mm thick Laminate & internal

surfaces are covered with 1 mm thick laminate. External & internal

241 joints covered with beading Patti complete with Polish finish. With Sqm 41.00 13,517.58

grooves shown as per drawing All complete with proper hardware

like locks, S.S. Screws, MS Nails, Magnets, table chains, cable

manager SS 304 Handles of 250 mm and 100 mm dia etc. All

Details as per shown in detail drawings & as per instructions of

architect/consultant / in charge engineer

Sr. Qty. May More Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. Or Less Rate In FIghure

Notice Board / Pin Board

Supplying of Notice Board of 3'x 3' (or as specified) with all Fixing

242 Arrangement complete as per drawing and Directed by Engineer In Nos 4.00 7,259.38

Charge etc complete.

Providing and fixing News paper stand size 650 x 820 x 1200 or

required height made out of 18 mm wtr.prf. [MR Grade] ply with

mm. thk inner laminate for top including back panel with shelves

for magazine and news paper as shown in drawing, all expose joints

243 finish with teakwood beadsing patti with polish finish and provision Nos 2.00 12,901.20

of openable top for news paper storage complete as per detailed

drawings and Engineer-In Charge and Architect

Supplying and providing reading chairs with PP arms with soft PU

pads, Seat and back upholstered with cushioned and MS powder

coated frame and cantilever legs. Overall dimension 590 L x 600 W

x 915 H (Or as specified) complete as directed by architect and

product as per given specification. Complete as per architectural

design and concept and approved by Architect & Client.

Supplying and providing High Back Mesh office Chair As per

specification below:

-Metal frame seat made of Mesh fabric upholstery (foam base)

-Adjustable Head rest

-Fixed Arm rest

-Knee tilt mechanism

245 -360 swivel motion/ 100mm stroke gas Nos 1.00 10,738.07

-Nylon Star base

-Pushback mechanism & Comfy seating.

-Complete as per architectural design and concept and approved by

Architect & Client.

Supplying and providing Mid Back Mesh office Chair As per

specification below:

-Metal frame seat made of Mesh fabric upholstery (foam base)

-Center tilt mechanism

-100mm class 4 gas lift

246 -PP Fixed Arm rest Nos 8.00 5,024.65

-Nylon Star base/Twin wheel nylons casters

-Complete as per architectural design and concept and approved by

Architect & Client.

Supplying and providing dust bin made of 100% virgin plastic with

247 paddle. Capacity-10 to 15 Ltr. Nos 5.00 557.52

Supplying and providing dust bin made of 100% virgin plastic with

248 paddle. Capacity-120 L Nos 3.00 1,568.03

Sr. Qty. May More Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. Or Less Rate In FIghure

Blinds : Providing and fixing as per approved make manual roller

blinds with Soltis fabric & spring drive system with steel ball

chain/one touch with speed control action roller blind with end

brackets with head ail, components, bottom bar.Color-Alu with

manual operation and warranty etc as per manufacturer’s

specifications. Fabric to be as per approved sample. All the work

complete as per the detailed drawing and instruction of

Architect/EIC. Soltis-99-Color-Alu fabric: 39% Polyester/61% PVC

with Aluminum Backing. Weight:290 g/sqm, Thickness:0.32 mm,

Openness Factor:3%, Visible Light Transmission (N-N): 2%-4%, Solar

reflection (white) 65%, Internal Solar Factor (gtot): 0.35 - 0.48,

Tensile Strength (Warp/Weft):160/170daN/5cm,Tearing

249 Strength(Warp/Weft):11/13daN, Fungi static Treatment: Degree 0, Sqm 115.00 1,962.94

Excellent (EN ISO 846-A) Fire Retardancy:B-s2,d0/EN 13501-1. All

complete as per approval of designer & instruction of Project

Manager. (The mode of Measurement: The size of the blind will be

measured from end to end bracket (Left to Right bracket) & height

will be measured from top of the pelmet till the bottom of the

bottom bar

Providing and fixing Godess Saraswati idol (Material- Fibre) 5 ft tall,

with proportionately base dimenstion as per approved design by

250 client and complete as per instruction of engineer-in charge and Nos 1.00 1,50,995.00

consultant.

Providing and fixing Wall art/Photoframes of size 2ftx2ft with

wooden frame of size 2in x 1in consisting 6mm thick ply in back

251 with digital vinyl printing and 5mm thick glass on top if required. Nos 30.00 2,439.15

Providing & fixing 75' UHD 4K Smart LED TV, Screen Resolution

3840 x 2160 pixels with HDR TypeHDR 10+ complete as per

Providing and fixing PCs with configuration of Core I5 12th Gen,

8Gb RAM DDR4, 256 GB SSD +1TB HDD, WIN.11 HOME MS OFFICE

253 2021 STUDENT, Full HD display of 21 to 23.8' with keyboard and Nos 8.00 59,748.35

Providing and fixing Automatic Duplex laser printer with 30 pages

254 per minute print speed, 8 mb memory, Large 250 sheet paper tray Nos 1.00 15,157.58

with USB connectivity.

Supplying and providing xerox machine- -20PPM Copy / Print

255 /Color Scan / Duplex DADF /Single Nos 1.00 58,075.00

Providing and fixing Directional and Informative Signages-

Providing and fixing in position informational signage made of

3mm thick high grade cast acrylic sheet of approved brand and

color, it shall featurecomputerized vinyl lettering. Work includes

256 laser cutting of the acrylic sheet to the required size and shape and Sqm 2.25 9,175.85

mount on wall with SS Spacer studs as per drawing and directed by

Architect.

Sr. Qty. May More Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. Or Less Rate In FIghure

Providing and Fixing Library Name in Gujarati Letter SS304 1mm

257 thick letter 1.5" depth 10" Height with Duco color & fitting as per Nos 1.00 52,520.00

direction of Architect & EIC.

Total Amount Rs. =

Total Amount Rs. =

I/We am/are willing to carry out the work @............ % above/below percent ( should be

written in figures & Words) of the estimated rates mentoined above . Amount of my/our

tender work out as under .

Estimated amount put to tender Estimated amount put to tender

Deduct:……………………...….% below Add……………………..……..% above

IN words IN words

(Please strike out whichever is not applicable.)

The Contractor shall exhibit a board with detailed specification and details of work as directed

1 by the Engineer-In-Charge for which no extra payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills

In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.:

PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C.

items where there is a change as per actual mix design the cost of difference of cement consumption

have been deducted from the rate of original item at the rate of input rate mentioned in all the tender.

Sr. Qty. May More Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. Or Less Rate In FIghure

Signature of Contractor with Seal Signature of Contracting Authority with Seal