SE/SIL/CRF/16-17/RTL

Amount

Earthwork in excavation for foundation trenches of walls,retaining footings of column, steps,septic tank etc.....(A) upto a depth of 2.00m below the existing ground level,in Ordinary Soil,.. as per specification and approved estimate.

Providing brick soling in foundation and under floor with stone/ best quality picked jhama brick......(a) Brick on flat soling etc as per specification and approved estimate.

Providing brick soling in foundation and under floor with stone/ best quality picked jhama brick......(a) Brick on flat soling etc as per specification and approved estimate. Additional Amount for Bricks

Plain cement Concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, wall etc as per sprcification and approved estimate. (a) In prop.1:3:6

Supplying fitting and fixing in position reinforcement bars conforming to relevant ISI Code for RCC Work/RB walling etc (b) TMT Bar (i) TATA/SAIL Bar as per specification and approved estimate

Supplying fitting and fixing in position reinforcement bars conforming to relevant ISI Code for RCC Work/RB walling etc (c)ISI approved-MS Rod as per specification and approved estimate

Providing and laying 25mm thick DPC with cement concrete in prop 1:1.5:3 with graded stone aggregate etc as per specification and approved estimate

Providing formwork of ordinary timber planking so as to give a rough finish including centering, shuttering, etc as per specification and approved estimate 3.1.1.1 Foundation, footing, bases of columns,pile cap,etc...... (i) Using 38mm thick plank

3.1.1.2 sides of tie beams, plinth beams,grade beams etc as per specification and approved estimate. (i) Using 38mm thick plank

Earth/ sand filling in plinth layer not more than 150mm thick including carriage, watering,ramming,etc as per specification and approved estimate.

Providing and laying plain/reinforced cement concrete works in prop 1:1.5:3 as per approved estimate and technical specification (a) In substructure upto plinth level .

Providing and laying plain/reinforced cement concrete as per approved estimate and technical specification (a) In superstructure from plinth level upto 1st floor level .

Brickwork in cement mortar with first`class brick including racking out joints etc as per specification and approved estimate (a)In prop 1:4 Plinth wall

Brickwork in cement mortar with first`class brick including racking out joints etc as per specification and approved estimate (a)In prop 1:4 Plinth wall Additional Amount for Bricks

65mm thick cement concrete floor consisting of 50mm under layer of cement concrete in prop 1:3:6 and 15mm thick wearing layer etc as per specification and approved estimate.

122mm thick first class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure (i) In prop1:4 Wall of ground floor and Deduct for Door and Windows

122mm thick first class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure (i) In prop1:4 Wall of ground floor and Deduct for Door and Windows Additional Amount for Bricks

15mm thick cement plaster in single coat on rough side of single or half brick wall for interior plastering upto 1st floor level etc as per specification and approved estimate

10mm thick cement plaster in single coat on fair side of single or half brick wall for interior plastering upto 1st floor level etc as per specification and approved estimate In prop1:4

Providing surface preparation for walls, ceiling etc using average 1.50mm thick Plaster of paris etc as per specification and approved estimate.

Wall painting (two coats) with acrylic emulsion paint approved brand and manufacturer etc as per specification and approved estimate

Providing wood work in frame (chowkhat) of doors, windows, clerestory.etc as per specification and approved estimate

Providing fitting and fixing full panelled doors/windows including oxidized M.S. Butt hinges

Providing plinth protection 50mm thick to cement concrete 1:3:6 with coarse aggregate of 20mm nominal size including finishing etc as per specification and approved estimate

Providing fitting and fixing 40mmx48mm wood reinforced PVC Chowkhats fixed to the columns/stiffeners/walls as per specification and approved estimate

Providing fitting and fixing PVC Door shutters of Duroplast DPS3720 make made from extruded PVC stiles..... as per specification and approved estimate

Providing fitting and fixing MS grill of required pattern for windows/clerestorywindows etc as per specification and approved estimate

Providing fitting and fixing anodised alluminium windows and ventilators of standard section etc as per specification and approved estimate

Providing polished ceramic wall tiles of approved quality, size, shape etc as per specification and approved estimate

Providing ceramic tiles of approved quality, size, shape etc as per specification and approved estimate on floors,skirtings,treads,risers etc

Providing VITRIFIED floor tiles of approved quality, size, shape etc as per specification and approved estimate

The 12.5mm thick square edge Fulltone/Sundance/Cratone/ textured Gypboard panels etc as per specification and approved estimate.

Providing fitting hoisting and fixing of roof trusses fabricated using any one or combination of (i) Square (ii) Rectangular Hollow section of specifications (a) Using TATA make RHS/SHS of grade 310

Providing fitting hoisting and fixing of roof trusses fabricated using any one or combination of (i) Square (ii) Rectangular Hollow section of specifications (a) Using TATA make RHS/SHS of grade 310. Difference of Cost as compared to Market Price.

Providing colour coated DURASHINE/TATA BLUESCOPE Zinc-Aluminium profile sheet. Etc as per specification and approved estimate

Providing colour coated DURASHINE/TATA BLUESCOPE Zinc-Aluminium profile sheet. Etc as per specification and approved estimate Difference of cost as compared to Market Price

Providing fitting and fixing vitreous WC Squatting pan with all fittings as per approved estimate and technical specification.

Providing fitting and fixing Vitreous China Dual Flush/Floor Mounted Coupled/Extended WC etc as per specification and approved estimate

Providing fitting and fixing Vitreous China flat back type lipped front urinal basin etc as per specification and approved estimate

Providing vitreous China wash basin with CI/MS bracket, C.P. Brass chain with plug etc as per specification and approved estimate

Supplying fitting and fixing Mono layer UV Stabilised PP-R pipes, etc as per specification and approved estimate.

Supplying fitting and fixing CP bib cock 15mm dia of approved brand as directed and specified

Supplying fitting and fixing stop cock of approved brand of size as mentioned below and directed and specified (iv) 32 mm dia

Clearance of service septic tank and removing the night soil and debris etc as per approved estimate and technical specification

Providing &Laying ICBP having thickness 80mm as peo technical specification.

Electric Works Provision. Wiring for light/fan/point with 1.5 sq mm P.V.C insulated unsheathed copper conductor 1100volts as approved by the Deptt. Short point upto 3.00m length

Wiring for light/fan/point with 1.5 sq mm P.V.C insulated unsheathed copper conductor 1100volts as approved by the Deptt. Medium point upto 6.00m length.

Wiring for light/fan/point with 1.5 sq mm P.V.C insulated unsheathed copper conductor 1100volts as approved by the Deptt. Long point upto 10.00m length.

Wiringfor 5/6 pin 16 Amps power plug with 4sqmm P.V.C. Insulated single core unsheathed Industrial cable FR conforming to IS-694:1990 with flexible bright annealed electrolytic copper conductor for voltage grade upto 1100 volts......Long point up to 10.00m length.

Wiring for drawing sub main line with PVC insulated single core unsheathed industrial cable copper conductor for voltage grade upto 1100volts With 2x2.5 sqmm+ earth continuity with 1x1.5 sqmm in flat 19mm ISI marked casing "n" capping system.

Wiring for drawing sub main line with PVC insulated single core unsheathed industrial cable copper conductor for voltage grade upto 1100volts With 2x4 sqmm+ earth continuity with 1x2.5 sqmm in flat 19mm ISI marked casing "n" capping system.

Wiring for 5 pin 6 amp plug with 1.5sq mm P.V.C. insulated single core unsheathed industrial cable copperincluding providing & fixing 5 pin 6 amp socket outlet and 6 amp flush type switch earthing.....on same board of light and fan.

Supplying with fitting and fixing of batten holder including 11W CFL lamp and connection as required.

Supplying with fitting and fixing sheet steel powder painted dust & vermin proof double door surface mounting SPN MCB DB as reqd. Complete as directed by the Deptt.

Supplying with fitting and fixing MCCB incoming and MCB outgoing sheet steel, phosphatised,powder painted double door IP-43 surface mounting vertical TPN MCB DB incorporated with bas-bar upto 250A.........as approved, specified and directed by the Deptt.

Supplying with fitting and fixing single pole 10KA 240/415 V 50 Hz MCB..... As directed by the Deptt. 6 to 32 A

Supplying with fitting and fixing single pole 10KA 240/415 V 50 Hz MCB..... As directed by the Deptt. 40 A

Supplying with fitting and fixing panel mountain open execution 25KA 415 V 50 Hz 4P MCCB ....... As directed by the Deptt.63 A.

Supply installation and testing og G.E. Plate earth station with 600mmx600mmx6mm heavy duty G.I. Earth plate with necessary 40 mm dia G.I. Watering pipe........as specified by the Deptt.

Extra for using salt (5K and Charcoal 96K in G.I./ Copper plate Earth Station pit to provide low impedence ground in location of high soil resistivity... As specifird by thr Deptt.

Supplying and laying of 6 SWG G.I. Earth from Electrode to electrical switch gears or electrical machineries ...as approved , specified and directed by the Deptt.

Supplying including fitting and fixing of A.C.,Ceiling fan complete with all accessories as directed by the Deptt.

Supplying including fitting and fixing of A.C., Exhaust fan in the existing hole on the wall.... as directed by the Deptt.(27.2.1.3) High Speed 225 mm sweep (ORIENT make), Trans Air 225 mm sweep (Crompton make ), Ventil Air DX 250 mm sweep Louver type (Havells make).

Supplying including fitting and fixing of A.C Wall fan in the wall of following sweeps with making necessary connection.... as directed by the Deptt.(27.4.1.5) Swing platina with plastic blade,400mm sweep .

Supplying fitting and fixing of ceiling fan regulator including connection etc complete as required (27.6.2) Electronic type.

Supplying and laying of following size PVC/ XLPE insulated and PVC sheathed 1.1 KV G solid Aluminium conductor....as approved by the Deptt....(Nicco/Havells/ RPG/CCI/Polycab/ Gloster/ Fionlex make)

Supplying and laying of Solid Aluminium conductor upto 10 sq mm balance stranded conductor, XLPE insulated, cores laid up,PVC tape inner sheathed, Armour.....as approved by the Deptt....(Nicco/Havells/ RPG/CGI/Polycab/ Gloster/ Fionlex make)(32.5.3.1) 25.00 sqmm 3 &1/2 Core U.G. cable in 40 mm dia medium duty G/I. pipe.

Supplying, installation,testing and Commission of the following indoor Decorative recessed typed mirror optics down lighter luminaries complete...as directed by thre Deptt

Supplying including , installation,connection cable, as approved by the Deptt with 2x 2.5 sqmm copper FR CABLE, testing and commissioning og street light/FLOODLIGHT on existing pole/structure including lamp,drivetr,ballast as requiredollowing indoor Decorative recessed typed mirror optics down lighter luminaries complete...as directed by thre Deptt