Construction of Room and Barbed wire fencing

Earth work in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH, including Overhead charges and Contractors Profit @ 13.615%

Plain Cement Concrete corresponding to M7.5 grade as per IS 456 equivalent to (1:4:8) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 40mm size HBG metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including sales & other taxes on all materials, all operational, incidental, and labour charges such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete for finished item of work for Foundations and Flooring Bed (APSS No. 402), including Over Head Charges, Contractor Profit @ 13.615% but excluding seigniorages charge and GST.

Providing plain cement concrete M 15 grade in open foundations using 40, 20 & 10mm size Graded hard granite machine crushed stone aggregate, mechanically mixed, placed in position and compacted by vibration including curing for 14 days complete up to G.L. as per drawings and technical specifications Clause 802, 803, 1202 & 1203 MORD including all overheads and contractor's profit @13.615% but excluding GST and Seigniorage charges.for bed concrete

Providing and fixing 1.80 metre long RCC fencing posts with 6 mm bar bibs as per design in plate No. 22/2/2. (earth work & concrete to be paid for separately), including Overhead charges and Contractors Profit @ 13.615%

Supplying and fixing galvanised steel barbed wire (IS : 278-1962/1978 Type I) weighing 9.38 Kg per 100 metres (min.), Straining and fixing to any type of standard, rails, straining bolts, including securing with and provision of galvanised mild steel wire, stapples or steel pins, etc., as directed (Posts and struts of wood, concrete, steel, etc.) and straining bolts shall be paid for separately), including Overhead charges and Contractors Profit @ 13.615%

Supplying and fixing hot dipped galvanised iron chain link mesh 8 guage (4.0mm) as per IS: 2721-1979: 3"X3" (76mmX76mm)-8 gauge Straining and fixing to any type of standard, rails, straining bolts, including securing with and provision of galvanised mild steel wire, stapples or steel pins, etc., as directed (Posts and struts of wood, concrete, steel, etc.) and straining bolts shall be paid for separately), including Overhead charges and Contractors Profit @ 13.615%

RCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, but excluding centering, shuttering, including Overhead charges and Contractors Profit @ 13.615% - For Footings

RCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, but excluding centering, shuttering, including Overhead charges and Contractors Profit @ 13.615% - For Columns

RCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, but excluding centering, shuttering, including Overhead charges and Contractors Profit @ 13.615% - For Plinth Beam

RCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, but excluding centering, shuttering, including Overhead charges and Contractors Profit @ 13.615% - For Roof Slab (125 mm thick)

Fly Ash Brick masonry work in CM(1:6) prop (Cement : Sand) in superstructure with fly ash cement / lime solid blocks of size 290mm x 225mm x 140mm from approved source having minimum crushing strength of 50 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, overheads and contrctor profit etc., complete for finished item of work. (APSS No. 501 & 504), including Overhead charges and Contractors Profit @ 13.615%

Plastering 12mm thick in two coats with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water, etc., to site, cost of seigniorage charges and all other taxes on all materials, and operational, incidental charges and all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves etc. as directed by Engineer-in-charge, complete for finished item of work (APSS No. 901 & 904) for internal even faces of walls, including Overhead charges and Contractors Profit @ 13.615%

Painting two coats with acrylic based oil bound washable Distemper of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for compound wall finished item of work, but excluding conveyance charges of materials, including Overhead charges and Contractors Profit @ 13.615%

Supplying and fixing of MS.Iron Doors and windows with M.S.angles and M.S.Flates including cost and conveyances of all materials, cutting,welding,grinding and labour charges etc.complete, including Overhead charges and Contractors Profit @ 13.615%

Supply and fixing of M.S. iron grills gate with M.S. angle and M.S. Flates alround frame 40x10 mm and 10x10mm vertical & horizontal square rods including cost and conveyances of all materials, cutting ,welding ,grinding and labour charges etc.,complete, including Overhead charges and Contractors Profit @ 13.615%

Providing high yield strength deformed (HYSD) steel bars (Fe 415 grade as per IS 1786-1985) of 8mm to 36mm diameters, cutting, bending, to required sizes and shapes placing in position with cover blocks of approved size and binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of bars from approved sources to site of work, including cost and conveyance of binding wire, cover blocks and all operational, incidental, and labour charges such as cutting, bending, placing in position, tying etc., and sales & other taxes,on cost of all materials complete for finished item of work (APSS No.126) in all floors, including Overhead charges and Contractors Profit @ 13.615%

Drilling of Bore well by down the hole hammer drilling to a finished dia of 112/165 mm dia in all formations suitable for down the hole hammer drilling such as medium hard rock formation to hard rock formation, all consolidated formation etc. and drilling in over burden to dia not less than 200 mm etc and reaming the bore well to suit insertion of suitable casing pipe etc., including insertion of casing pipe with couplings, caps any other relevant materials upto required depth as directed by the department including transportation of drilling rigs and supporting vehicle and including bore development (Flushing of Bore Well at an average pressure of 150 PSI) conducting yield test, consumables charges, Crew charges required in fixation of pipe assembly completely done to the satisfaction of the department and including all labour charges but excluding all taxes, the cost of casing pipe, couplings, cap etc., The entire work should be carried out as per IS -2800 Part I & II 1979 and amended from time to time.Drilling of Bore well with DTH Rig per RM, including Overhead charges and Contractors Profit @ 13.615% - upto 90 mts (As per SSR 2025-26, P. No. 116)

Drilling of Bore well by down the hole hammer drilling to a finished dia of 112/165 mm dia in all formations suitable for down the hole hammer drilling such as medium hard rock formation to hard rock formation, all consolidated formation etc. and drilling in over burden to dia not less than 200 mm etc and reaming the bore well to suit insertion of suitable casing pipe etc., including insertion of casing pipe with couplings, caps any other relevant materials upto required depth as directed by the department including transportation of drilling rigs and supporting vehicle and including bore development (Flushing of Bore Well at an average pressure of 150 PSI) conducting yield test, consumables charges, Crew charges required in fixation of pipe assembly completely done to the satisfaction of the department and including all labour charges but excluding all taxes, the cost of casing pipe, couplings, cap etc., The entire work should be carried out as per IS -2800 Part I & II 1979 and amended from time to time.Drilling of Bore well with DTH Rig per RM, including Overhead charges and Contractors Profit @ 13.615% - upto 150 mts (As per SSR 2025-26, P. No. 116)

Cost and supply of 180mm dia 6kg/cm2 including cost and conveyence of all material and labour charges etc Complete

Supply and Transportation of 7.50 HP 12-16 Stage 5star rated submersible motor pumpset, confirming to IS 8034 and motor confirming to IS 9283 with waterproof winding, pump shall be suitable for various delivery head and discharge with stainless steel shaft motor suitable for working on 240V ± 10%, single phase 50 Hz AC supply, etc complete for 4" Bore well. Makes: As per list of recommended brands as category I.(MAT-03660), including Overhead charges and Contractors Profit @ 13.615%

Fabrication , transportation and supply of wall mounted control panel board of size 600x600x250mm made of 18 SWG CRCA sheet steel enclosure, 14 SWG mounting plate for cable entry fabricated , painted with two coats of Red oxide primer and two coats of Grey paint, lock and key arrangements two side lovures with weld mesh inside etc., complete consisting of the following equipment with all internal wiring using L&T / Finolex copper FRLS cables of suitable size and capacity and cable clamp etc complete for 3 phase motor pump sets. (1) Voltmeter ; 0-500 V 96x96mm size - 1No Makes: L&T / C&S / SALZAR / HPL/ AEI / Meco / Rishab (2) 0 to 20 Amps / 0- 50 Amps Ammeter (96x96mm size) - 1No. L&T / C&S / SALZAR / HPL/ AEI / Meco / Rishab (3) Single phase preventor of suitable range - 1No.Makes: L&T / Minilec / Powertec. 32 A TP, 10KA MCB. Makes: Legrand / Schneider capacitor Makes: L&T / Siemens / Schneider / Epcos/Havells. (4) 32 A TP, 10KA MCB. - 1No (5) Indication lamps (R-Y-B) with switch control - 1set (6) Voltmeter & Ammeter selector switch - 2 Nos of Supply and fixing of ISI Mark suitable capacitor up to 15.00HP to 20.00HP-(MAT-03713), including Overhead charges and Contractors Profit @ 13.615%

Cost and Supply of 3core 4sqmm flat copper cable wire - As per SSR Rate ,ELEC-5.4.17, MAT-02796

Manufacture, supply, & delivery of 50mm dia GI B-Class Pipes and transportationanywhere in Andhra Pradesh, excluding GST - As per SSR-25-26,P-877

Cost and supply of 180mm dia PVC Bore Cover including cost and conveyence of all material and labour charges etc complete (As per SSR-25-26, P.No.116)