Repairing Work of Aganwadi at Various Villages of Ta. Kalol Dist. Panchamahal (2025-26) (Package No-37 ) [Total 10 No Aaganwadi Repairing Work] (Second Attempt)

Name Of Work :- Repairing Work of Aganwadi at Various Villages of Ta. Kalol Dist. Panchamahal (2025-26) (Package

No-37 ) [Total 10 No Aaganwadi Repairing Work]

Taluka : Kalol District : Godhra

1 Mahadev Ni Muvadi, Ta. Kalol

2 Delol-1 Village, Ta. Kalol

3 Kanod-3 Village, Ta. Kalol

4 Ambala-1 Village, Ta. Kalol

5 Aeral Makhol Village, Ta.Kalol

6 Navagam Village, Ta. Kalol

7 Bakrol-4 Village, Ta. Kalol

8 Kalol-9 Village, Ta. Kalol

9 Medapur-2 Village, Ta. Kalol

10 Rinichhiya-1 Village, Ta. Kalol

Bill of Quantities

Item of work Quantities Rate in Amount

Unit Figures in

1 Dismentling doors, windows, ventilators etc. (wood or steel) shutters including 10.00 No. 182.94

chowkhats architraves, holdfasts and other attachment etc. complete and stacking

them within all lead and lift.(i) Not exceeding 3 Sq.M. in area.

2 Dismentling wood work, wrought framed and fixed in frames trusses including 1.07 Cum 1711.65

stacking the materials with all lead and lift.

3 Dismentling steel work including distempering and stacking the materials with all 83.70 Kg 3.67

4 Demolition of Brick work and stone masonry including stacking of serviceable 1.61 Cum 536.09

materilas and disposal of unserviceable materials with all lead and lift.(ii) In

5 Demolition including stacking of serviceable materials and disposal of 8.03 Cum 1030.81

unserviceable materials with all lead and lift. (i) R.C.C. work

6 Dismentaling tiled of stone floors laid in mortar including stacking of serviceable 428.41 SQM 46.77

materilas and disposal of unserviceable materials with all lead and lift.

7 Demolition of terrace including stacking of serviceable materilas and disposal of 509.14 SQM 62.21

unserviceable materials with all lead and lift.(i) Brick tile covering.

8 Removing dry oil bound distemper by a washing and scraping and sand papering 1940.02 SQM 10.99

the wall surface smooth including necessary repair to scratches complete.

9 Scraping oil paint from steel and other metal surface and making thesurface even 33.36 SQM 49.32

(with Hand Scraping.)

10 Providing and laying cement concrete work 1:2:4 (1- Cement : 2- Coarse sand : 4- 8.39 Cum 4099.59

graded stone aggregates 20 mm nominal size) and curing complete excluding

cost of formwork and reinforcement for reinforced concrete work in (A)

Foundations, footings, Base or columns and Mass concrete

11 Providing and laying controlled c.c.M.200 & curing complete including the cost 5.77 Cum 6309.47

of form work but excluding the cost of reinforcement for reinforced concrete

work in Slabs,landing,cantilevers upto floor two level for G.F.

12 Providing and laying controlled cement concrete M.200 and curing complete 2.26 Cum 6216.55

Including the cost of formwork but excluding the cost of reinforcement for

reinforced concrete work in (C) Slabs,landing,shelves,Balconies Lintels,

Beams, Girders and Cantilever upto floor two level. (For Beam)

13 Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, 686.00 Kg 76.21

binding and placing in position complete upto floor two level

14 Half brick masonary in Common Burnt Clay building bricks having crushing 7.20 Cum 651.67

strength not less than 35 kg/sq.cm in super structure above plinth level upto floor

two level in cement mortar 1:4 GF ( 1 cement : 4 fine sand) (B) Conventional.

1. Sch B Aganwadi Repairing @ Various Village Ta.kalol Page

Item of work Quantities Rate in Amount

Unit Figures in

15 Filling in foundation and plinth with murrum or selected soil in layers of 20cm. 13.36 Cum 273.96

thickness including watering, ramming andconsolidating etc. complete.

16 P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) base of 279.24 SQM 1334.64

cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on existing

flooring by adhesive material including dismentaling of existing flooring and

jointed with color cement slurry including finised with flush pointing & cleaning

the surface etc. complete for light shade

17 P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) base of 16.31 SQM 1397.83

cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on

existing flooring by adhesive material including dismentaling of existing flooring

and jointed with color cement slurry including finised with flush pointing &

cleaning the surface etc. complete for antiskit

18 Providing and laying polished Kota stone slab flooring over 20mm(Average) 87.05 SQM 1043.53

thick base of cement mortar 1:6 (1-cement : 6-coarse sand)or L.M. 1.1.5 laid over

and jointed with grey cement slurry including grubbing and polishing etc.

complete. (B) 30 mm thick

19 Providing and laying Marbo Grenite tiles 8 to 10 mm thick , 24'' x 24'' in skrting 66.31 SQM 1141.45

risers of steps and dedo on 10mm thick cement plaster 1:3 (1-cement : 3-coarse

sand) and jointed with white cement slurry.

20 Brick work using Common burnt clay building bricks having crushing strength 0.48 Cum 4289.33

not less than 35 kg/sq.cm in Super Structure above plinth level and up to floor

Two Level in cement mortar 1:6 ( 1 cement : 6 fine sand ) (B) Conventional.

21 Providing and laying broken chine mosaic flooring for terrace using 12 509.14 SQM 747.29

mm to 20 mm broken pieces of glazed tiles to be laid over cement mortar 1:3 to

plain or slope and to be tempered to bring mortar creme out upto surface

using white cement including rounding off junctions and extending them upto

cm along the wall,clearing with water and oxalic acid etc. as directed.

22 Providing 15mm thick cement plaster in single coat on Rough (Similar)side of 26.61 SQM 167.03

single or half brick walls for interior plastering upto floor two level and finished

even and smooth in (ii) Cement mortar 1:4 (1-cement :4-sand) (Interior Plaster)

23 Providing 15 mm thick cement plaster in single coat on brick/concrete walls for 53.10 SQM 191.85

interior plastering upto floor two level and finished even and smooth in (i)Cement

mortar 1:4 (1-cement:4-sand) (ceiling Plaster)

24 20mm thick sand faced cement plaster on walls upto height 10 metres above 17.04 SQM 329.29

ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-cement : 3-

sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-sand) etc.

25 Applying two coats of putty & two coats of primer ofapproved brand and 53.10 SQM 42.67

manufacture on new wall surface togive an even shade including thoroughly

brushing thesurface free from mortar dropping and other foreignmatter and sand

papered smooth.( For ceiling)

26 Wall painting (two coats) with plastic emulsion paint of approved brand and 694.78 SQM 78.90

manufacture on undecorated wallsurface to give an even shade including

throughly brushingthe surface free from mortar droppings and other foreignmatter

and sand papered smooth.(Interior Wall Paint)

27 Wall painting two coats with plastic emulsion paint of approved brand and 293.65 SQM 80.98

manufacture on wall surfaces to give an even shade including throughly brushing

the surface free from mortar droppings and other foreign matter and sand papered

smooth on ceiling.(ceiling Paint)

28 Finishing wall with weather proof exterior emulsion paint on wall surface (two 951.58 SQM 114.53

coats) to give an requiredshape even shade after thoroughly brushing the

surfaceto remove all dirt, and remains of loose powderedmaterials.etc complete

(Exterior Wall Paint)

1. Sch B Aganwadi Repairing @ Various Village Ta.kalol Page

Item of work Quantities Rate in Amount

Unit Figures in

29 Finishing wall with water proofing cement paint of on wall surfaces(Two coats) to 788.64 SQM 58.08

give an approved brand and manufacture and of required shape even shade after

thoroughly brushing the surface to remove all dirt and remains of loose powered

materials as damp proof coat.(as Damp Proof)

30 Labour Work for dismantling and removal ofexisting doors and/or windows, 37.00 Each 711.04

including frames,shutters, hardware, and fittings, without causingdamage to the

components or surroundingstructure. It also includes proper storage,protection,

and subsequent reinstallation at thesame or designated location after

necessaryrepair, alignment, and servicing of the component

31 Labour Work for Laying And Spraying of water proofing material. 7.00 DAY 773.66

32 Water proofing materials silicon base Water repellent compound. 30.24 Liters 209.71

33 Repairing and altering Existing steel /MS window, shutter and door by welding 115.66 Kg 132.31

and replacing old member including all hardware , material and Labour as per

directed by enginner incharge.

34 Providing GI Mosquito Mesh For Vent. 22.08 SQM 109.08

35 Painting one coats (excluding priming coat) on previously painted steel and other 35.03 SQM 55.21

metal surface with enamel paint, brushing to give an evenshade including

cleaning the surface of all dirt, dust and other foreign matter.

36 Providing, Erecting , and Fixing Fabrication Door, Window made from 255.99 Kg 143.42

anticorossive MS Sections of various size i.e. L Angle -30x30x3 Frame & Door

Edge 25x25x3mm , 2mm thk plate, etc as per detailed design and specified

drawing including all hardware, accessories and fixtures (i.e Aldrope, Hinges,

Nakucha, Stoppers etc) and FInish With one coat Primer and Two coat of Oil

Paint Complete as per directed by engineer incharge.

37 Providing and fixing window having extruded aluminum colour anodized section 3.52 SQM 3328.96

frame main outer size 95mm x 24mm x 1.17mm (of Jindal section no.2459 @ Wt.

0.738 Kg/mt), horizontal three track member size 92mm x 31.75mm x 1.30mm

(of Jindal section no. 8688, @ Wt. 1.07 Kg/mt), vertical member of size 92mm

31.75mm x 1.50mm (of Jindal section no. 8933 @ Wt. 1.06 Kg/mt) with sliding

shutters of horizontal member size 40mm x 18mm x 1.29mm (of Jindal Section

No. 8947 @ Wt. of 0.456 Kg/mt), vertical member of size 40mm x 18mm x

mm (of Jindal section no: 8949 @ Wt. of 0.456 kg / mt) with 5 mm th transparent

bronze colour tinted float glass with powder coated aluminum fittings and fixtures

and transparent silicon sealant glass fixing Including Granite Frame as per details

38 Providing and fixing M.S. grills of required pattern to wooden frames of windows 153.25 Kg 154.62

etc. with M.S. flats at required spacings and frame alround, square or round bars

with round headed bolts and nuts or by screws. (B) ORNAMENTAL GRILL

39 Providing and fixing Louverd type ventilators with powder coated aluminum 0.72 SQM 13732.97

fittings and fixtures and Blur glass fixing to Adjustable louverds and black

granite frame as per details and executed as per directed by Engineer Incharge.

40 Wall painting for special type of Artwork (BALA painting) , Painting , Alphabets 216.79 SQM 317.14

and Child education regarding Educational Painting of washable Acric paint of

semi gloss or satin finish and adhere to guidelines set by the Ministry of Women

& Child Development including all , material and Labour as per directed by

enginner incharge.

41 Providing erecting and fixing double coated ISI water tank of required capacity 1500.00 Liters 3.95

each with all necessary fittings and connection etc. completeon terrace

42 Providing and fixing ball cock of approved quality as directed.(A) Copper 1.00 No. 132.89

metal(i) 25 mm dia.

1. Sch B Aganwadi Repairing @ Various Village Ta.kalol Page

Item of work Quantities Rate in Amount

Unit Figures in

43 Providing sock pit of 5.00 Cu.M. Volume including excavating andfilling 1.00 No. 3163.49

brickbats with dry masonry work at top for 45cm. heightincluding covering the

top with stone including providing vatas in C.M.1:3 with finishing curing etc.

complete as directed.

Rs. Sixteen Lac Fifty One Thousand Four Hundred Ten And Twenty Five N.P. Only

Credit from Dismentalling will be Deducted From respective 1st R.A. Bill Of Contractor's. -30387.50

I / We am / are willing to carryout the work at ………..% above/Below percent (………………………. Percent above/Below)

(Should be written in figure and words) of the estimated rates mentioned above. Amount of my / our tender worked out as

Estimated amount put to tender Rs: ……………. Estimated amount put to tender Rs: …………...

Deduct……% below Rs: …………………………. Add……% above Rs: ………………………….…

(Please strike out which ever is not applicable.)

1 The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which no extra

payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills

4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement

Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the cost of

difference of cement consumption have been deducted from the rate of original item at the rate of input rate mentioned in all the tender.

5 Credit of Dismentalled /Reuse materils amounting of Rs. -30387.5 Must be fully recovered from respective 1st R.A. Bill Of Contractor's.

Quantities rate and wordings of items are as per estimate and calculation in the Sch. - B are airthmatically checked.

Above all items of "Schedule-B" with Item Description, Unit, Rate & Amount have verified by me and found

Sr.Divisional Account Officer Deputy Executive Engineer

Panchayat (R & B) Division Panchayat (R & B) Sub Division

Signaturre of contractor Executive Engineer

with seal Panchayat (R & B) Division

1. Sch B Aganwadi Repairing @ Various Village Ta.kalol Page