PROVN OF INTEGRATED WAREHOUSE AT ARMY AVN BASE AND OTHER SANCTIONED WORK AT MISSAMARI UNDER GE MISSAMAR

Amount

Surface dressing in soft loose soil n exc 15 cm deep and getting out, complete all as specified and directed.

Excavating in trenches n.exe. 1.5 m width and n.exe. 1.5 m in depth for foundation in soft/loose soil & getting out, complete all as specified and directed.

Excavating in trenches exe. 1.5 m width and exc 1.50 m but not exe. 3.00 m in depth for foundation in soft/loose soil & getting out, complete all as specified and directed.

Returning filling in, including spreading, levelling, watering & well ramming in layers not exc 25 cm, complete all as specified and directed.

Removing excavated material n exc 50 m & depositing where directed at a level n exc 1.5 m, complete all as specified and directed.

M&L cement concrete with PCC type D2 1:4:8 using 40mm graded aggregate as in foundation, complete all as specified and directed.

M&L for M25 RCC design mix using 20 mm graded aggrete for raft foundation footing ,bases of columns, plinth beams & mass concrete, complete all as specified and directed.

M&L for M25 RCC design mix using 20 mm graded aggrete for columns, pillars,posts and struts, complete all as specified and directed.

M&L for M25 RCC design mix using 20 mm graded aggrete for beams, cantilevers,slab, roof beam , chajja, lintels over 1.5 m span, etc, complete all as specified and directed.

M&L for precast reinforced cement concrete cover slab Type B1 (1:2:4) ( using 20mm graded aggregate) as in drain cover, manhole cover, etc, complete all as specified and directed.

M & L for TMT reinforcement 10 mm dia and over cut to length bent to shape including cranking, hooking etcbinding with mild steel wire not less than 0.90 mm dia (annealed) complete all as specified and directed.

S & F mild steel TMT bar 5 mm dia and over upto and including 10mm dia in strrups as in including cutting, bending and binding with mild steel not less than 0.9 mm dia (annealed) complete all as specified and directed.

Use and waste form work for foundation footing , bases of columns &plinth beams similar work vertical or batter, complete all as specified and directed.

Use and waste form work for side of pillars, posts, columns & similar works vertical or batter, complete all as specified and directed.

Use and waste form work to side & soffits of floor or roof beams, slab, lintels & similar works,complete all as specified and directed.

M&L for brick work with burnt old size bricks built in cement mortar 1:6 straight or curved on plan exceeding 6mtr mean radius and , complete all as specified and directed.

M&L for 40 mm thick Damp proof course to horizontal or vertical surfaces including necessary form work in cement concrete 1:2:4 type B-0 (Using 12.5 mm graded stone aggregate) mixed with WPC ( Note : WPC shall be measured & paid separately )

M&L rendering 15mm thick on other than fair faces of brick or concrete Surfaces in cement mortar 1:6 finished even and smooth, complete all as specified and directed.

M&L rendering 15mm thick on other than fair faces of brick or concrete Surfaces in cement mortar 1:6 finished even and smooth without using extra cement, complete all as specified and directed.

M&L for 20mm thick plaster on fair faces of brick work or concrete surface in cm (1:4) with wpc @2% by weight face of conc work to wall surface and the surface is finished even and smooth without using extra cement, complete all as specified and directed.

Supply only integral Water Proofing Compound

M&L for rendering 5 mm thick on ceiling or concrete Surfaces in cement mortar 1:3 finished even and smooth, complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C2 using 40mm graded aggregate as in plinth course, complete all as specified and directed.

M&L Sand filling under floors or in foundations including watering and conosoldiation, complete all as specified and directed.

M&L for brocken stone or boulders of hardcore of gauge n exc 63 mm deposited, spread and levelled in layers n exc 15 cm thick watered and rammed to a true surface, complete all as specified and directed.

M&L for 100mm thick PCC type D2 1:4:8 using (40mm gradded aggregate) as in sub base, complete all as specified and directed.

M&L for Pre-polished Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry with grey cement and pigment in floors including 20 mm thick screed bed in CM 1:4 complete all as specified and as directed.

M&L for Machine cut kota stone slab flooring 20-25mm thick over 20 mm thick screed bed in C:M 1:6, laid and jointed with grey cement slurry mixed with pigment to match the mixed with pigment to match the shade of the slab including rubbing and polishing , complete all as specified and directed.

M&L for Machine cut kota stone slab as in skirting 20-25mm thick over 15 mm thick backing coat in C:M 1:6, laid and jointed with grey cement slurry mixed with pigment to match the mixed with pigment to match the shade of the slab including rubbing and polishing , complete all as specified and directed.

S&F facroty made Second class hard wood kiln seasoned and chemically pressure treated plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints.

S&F 35 mm thick factory made second class hard wood, kiln seasoned and chemically pressure treated plain framed, panelled shutter (Two panel) with lock rail and panel of 9 mm BWP Commercial ply or 12 mm veneered particle board with commercial face veneers on both faces or 10 mm bison panel.

S&F for anodised Aluminium two track sliding window and ventiletor frame made up 62 mm /29.5 mm 1.5 mm thick aluminium section & shutter made up 38 mm / 20 mm/1.5 mm thick without sash bar alum section including all necessary joining cleats,hold fast ,rubber gasket anodised snap beading,anodised alumn fittings,suitable alumn handle and locking arrangment etc as directed.

S&F 4 mm thick Sheet glass, ordinary quality and glazing with aluminium beads in squares exceeding 0.50 Sqm in each pane, complete all as specified and directed.

S&F framed work such as grills, gratings, etc with ends of bars shouldered and/or revited, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work confirming to Fe.290. Gde-E-165

S&F 150mm long aluminium anodised barrel tower bolts of extruded section

S&F aluminium alloy 250mm anodised sliding door bolts with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast - aluminium alloy and fixed.

S&F 100mm MS butt hinges medium weight

S&F aluminium handle cast type anodised 150mm size

M&L three coat of white wash on ceiling surface including preparation of new surface complete all as specified and directed.

M&L for applying a coat of 1mm thick wall care putty over plaster surface to prepare the surface even and smooth as per manufacture instruction, complete all as specified and as directed.

M&L for preparation of new plastered wall surface applying two coat of oil bound distemper on wall all as complete all as specified and directed.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.

M&L for brushing neat cement slurry with 03 Kg of cement per Sqm

M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 . (Internal water proof compound measured seperately)

M&L 25 mm thick cement concrete PCC Type B0 1:2:4 using 12.5 mm graded aggregate.

M&L APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application including coating the surface with water based bituminous primer blow bitumen of 85/25 or 90/15 at 1.2 Kg/Sqm both at bottom and top of the membrance and finally finished with one coat of bitumenous aluminium paint at 100 gm per sqm complete all as specified.

M&L for preparation of new wooden surfaces and applying two coats of synthetic enamel paint over a coat of primer of any description, not otherwise described, over 10cm width or girth, complete all as specified and directed.

M&L Painting two coats of synthetic enamel paint over a coat of red oxide primer to new steel Surfaces of any description, not otherwise described, over 10cm width or girth complete all as specified and directed.

M & L for Point wiring with 1.5 Sq mm copper conductor single core FRLSH PVC insulated unsheathed 1100 Volts multistranded drawn through and including rigid PVC Concealed conduit and its accessories of suitable size, high grade ISI marked in walls /roof and PVC boxes of suitable size including fixing/grouting sunken/ surface as per site requirement for mounting the switches / sockets/ regulators etc including running up of 1.5 Sq mm copper conductor FRLSH PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly complete all as specified and directed for One light point controlled by one, one way switch 5 Amps

All as per Item No 49, but One ceiling fan / exhaust fan point controlled by one , one way switch and regulator

All as per Item No 49, but One 3 point 5 Amps socket outlets point controlled by one switch on the same board

All as per Item No 49, but One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board

All as per Item No 49, but but for one light point controlled by one, two way switch 5 Amps

All as per Item No 49 above, but with two run of 2.5 sqmm multi stranded Single core copper conductor 1100 volts grade FRLSH PVC insulated sheathed cable with one run of FRLSH PVC 2.5 Sqmm multi standard insulated sheathed copper wire as earth continuity conductor along with wiring and connecting to the common earth dolly on independent board.

S & F Switch piano flush type single pole one way 5 Amp, 230 Volts , complete all as specified and directed.

S & F Modular switch piano single pole flush type, two way, 6 amps, 230 volts, complete all as specified and directed.

S & F Socket outlet 2 in 1, 3 pin, 5 Amps , complete all as specified and directed.

S & F Switch socket combination flush type multipurpose 2/3 pin 5 Amps two in one , 230 volts , complete all as specified and directed.

S&F Switch socket combination 2 in 1 3 pin, 15 Amp flush type universal, complete all as specified and directed.

S&F ceilling rose three terminal surface bakelite type AC 50 Hz 230 Volt of size 65x50mm ,complete all as specified and directed.

S & F ceiling fan regulator step type, flush type heavy duty suitable to work on 230 Volt AC supply , complete all as specified and directed.

S & F Lamp holder with insulated body, with back plate suitable for batten fittings, complete all as specified and directed.

S & F LED ADORE 10 W B22 CDL 5 STAR LAMP with B 22 base capacity 1200 lumen complete all as specified.Make : Havells, Cat No: LHLDEUEBML8Z010 or equivalent in CG or Surya.

S & F sheet metal enclosure MCB DB TPN 4 way with 200 amps rated bus bar 415 volts double door with magnetic locking system complete including removal of old unsv sheet metal enclosure all as specified Model:-DBTPE004DD Make -L&T/Schneider/Indo asian/Legrand

S & F MCB TPN 415 volts suitable for fixing in MCB DB of capacity 63 amps complete all as specified and directed.Model:-BB40630C Make -L&T/Schneider/Indo asian/Legrand

S & F MCB SP, 240 volts, 6-32A Amps 50 Hz ,confirms to IS/IEC 60898 Breaking Capacity of 10 kA, C-curve, complete all as specified and directed. Make -L&T,Model No-BB10060C,BB10100C,BB10160C and equivalent in Schinder/ Legrand.

S & F wall mounted LED 18 watts ,Batten type T 8 light fitting, 230 volts with extruded aluminium heat sink provided for efficient heat dissipation and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including Ultra bright LED polycarbonate (T8) tube (Single side connection) 4' x 18 watts with G13 lamp holder complete all as directed by Engineer-in-Charge.Model -REGALBATTENT8UPTO1X18WDSBSWH For Batten Fitting and Model-PHOTONULTRAE2.01213T8SSTL18WLED865SPC For T8 Tubelight ,Make Havells, or equivalent in CG, Surya, all as specifed and directed.

S & F Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 security light fitting luminaire with high power LEDs as light source and PC Cover having TOP opening seperate driver compartment with IP 66 Protection and impact resistance of IK07 with electronic driver of capacity 15 watts with pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting and GI pipe bracket made out of GI pipe medium grade 32 mm dia 1.5 mtr long bend to required shape complete all as directed by Engineer-in-Charge. Make- Havells,Model No - ENDURAPEARLSL15WLED757SASYTOPCMP Or Equivalent in CG and Surya all as specified and directed.

M & L sand cushioning in trenches for cable protection with coarse sand laid dry in trenches with uniform thickness including consolidation complete all as directed.

Supply & Laying well burnt brick , locally available best quality (sub class "B" bricks ) laid in trences perpendicular to UG Cable protection complete all as specified.

Supply & Laying LT heavy duty UG Cable of size 25 Sqmm 3.5 Core laid in trences /floor/on wall/service connection PVC Insulated, sheathing and armd 1100 Volts grade with aluminium conductor including connection to the main switch/cut out MCB/MCCB with necessary lugs after cutting to required length complete all as specified and directed. Make :- Polycab and equivalent in Havells and KEI

S & F GI Tubing light grade of size 50mm dia in protection of cable at road crossing /hard standing/pole protection fixed with clam as per site requirement etc, complete all as specified and directed.

Supply and fixing 5 star rated BLDC ceiling fans AC 230 Volts single phase 1200 mm sweep complete with all accessories including MS Hook, Nuts, Bolts and washer for hanging arrangement complete all as specified and directed. Make: Usha ,Model- TECHNO AIR 5 Star /HAVELLS/Crompton

Boring holes horizontally under Road without damaging the surface of Road of any type (minimum 1.0 METRE below the Road Surface with the help of GI Tubing not exc. 40mm bore (dia) for passing of UG Cable, complete all as specified and as directed. NOTE: GI Pipe laid will be measured and paid separately under relevant Item.

Earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground to a depth not less than 2.25 mtrs below ground level with top edge of earth plate not less than 1.5 mtrs below normal ground level connected to GI earth wire 4 mm dia drawn through and including GI protection pipe of light grade 15 mm bore by means of bolts, nuts, check nuts and washers including excavation earth work provisioning of PCC chamber made of PCC 1:3:6 RCC cover funnel with wiremesh 20mm dia watering pipe Medium grade, GI protection pipe 20mm dia bore all as specified in Electrical Plate No.3 of SSR Part I.

Supply Laying and Fix 3 layered (outer green coloured UV stabalized , middle black coloured UV stabalized, and inner most layer white coloured with antimicrobial property) fusion welded PP-R ( Polypropyelene random copolymer) Pipes 63 mm dia outer dia ISI marked and fittings including plain PPR Fittings and brass threaded PPR fittings and cramping , cutting and making good to the damages of grade PN -16 SDR 7.4 including laid in trenches or surface , fixing on wall with clamps at 1.00m spacing including testing of joints complete all as specified and as directed. Make:- SFMC or equivalent make of PRINC/FINOLEX/WET FLOW. Note - Excavation shall be measured and paid separately

Supply Laying and Fix 3 layered (outer green coloured UV stabalized , middle black coloured UV stabalized, and inner most layer white coloured with antimicrobial property) fusion welded PP-R ( Polypropyelene random copolymer) Pipes 50 mm dia outer dia ISI marked and fittings including plain PPR Fittings and brass threaded PPR fittings and cramping , cutting and making good to the damages of grade PN -16 SDR 7.4 including laid in trenches or surface , fixing on wall with clamps at 1.00m spacing including testing of joints complete all as specified and as directed. Make:- SFMC or equivalent make of PRINC/FINOLEX/WET FLOW. Note - Excavation shall be measured and paid separately

Supply Laying and Fix 3 layered (outer green coloured UV stabalized , middle black coloured UV stabalized, and inner most layer white coloured with antimicrobial property) fusion welded PP-R ( Polypropyelene random copolymer) Pipes 40 mm dia outer dia ISI marked and fittings including plain PPR Fittings and brass threaded PPR fittings and cramping , cutting and making good to the damages of grade PN -16 SDR 7.4 including laid in trenches or surface , fixing on wall with clamps at 1.00m spacing including testing of joints complete all as specified and as directed. Make:- SFMC or equivalent make of PRINC/FINOLEX/WET FLOW. Note - Excavation shall be measured and paid separately

Supply Laying and Fix 3 layered (outer green coloured UV stabalized , middle black coloured UV stabalized, and inner most layer white coloured with antimicrobial property) fusion welded PP-R ( Polypropyelene random copolymer) Pipes 32 mm dia outer dia ISI marked and fittings including plain PPR Fittings and brass threaded PPR fittings and cramping , cutting and making good to the damages of grade PN -16 SDR 7.4 including laid in trenches or surface , fixing on wall with clamps at 1.00m spacing including testing of joints complete all as specified and as directed. Make:- SFMC or equivalent make of PRINC/FINOLEX/WET FLOW. Note - Excavation shall be measured and paid separately

Supply Laying and Fix 3 layered (outer green coloured UV stabalized , middle black coloured UV stabalized, and inner most layer white coloured with antimicrobial property) fusion welded PP-R ( Polypropyelene random copolymer) Pipes 25 mm dia outer dia ISI marked and fittings including plain PPR Fittings and brass threaded PPR fittings and cramping , cutting and making good to the damages of grade PN -16 SDR 7.4 including laid in trenches or surface , fixing on wall with clamps at 1.00m spacing including testing of joints complete all as specified and as directed. Make:- SFMC or equivalent make of PRINC/FINOLEX/WET FLOW. Note - Excavation shall be measured and paid separately

S&F PP-R Gate valve (Brass insert) 3 layered (outer green coloured UV stabalized , middle black coloured UV stabalized, and inner most layer white coloured with antimicrobial property ) fusion welded PP-R ( Polypropyelene random copolymer) gate valve brass 63 mm Outer dia light weight ISI marked as per pre requirement of the site with handle screwed both ends for PP-R Pipes or for unions fixed of grade PN-25 , SDR-7.4 complete all as specified and as directed.Make:- SFMC or equivalent make of PRINC/FINOLEX/WET FLOW.

S&F PP-R Gate valve (Brass insert) 3 layered (outer green coloured UV stabalized , middle black coloured UV stabalized, and inner most layer white coloured with antimicrobial property ) fusion welded PP-R ( Polypropyelene random copolymer) gate valve brass 50 mm Outer dia light weight ISI marked as per pre requirement of the site with handle screwed both ends for PP-R Pipes or for unions fixed of grade PN-25 , SDR-7.4 complete all as specified and as directed.Make:- SFMC or equivalent make of PRINC/FINOLEX/WET FLOW.

S&F PP-R Gate valve (Brass insert) 3 layered (outer green coloured UV stabalized , middle black coloured UV stabalized, and inner most layer white coloured with antimicrobial property ) fusion welded PP-R ( Polypropyelene random copolymer) gate valve brass 40 mm Outer dia light weight ISI marked as per pre requirement of the site with handle screwed both ends for PP-R Pipes or for unions fixed of grade PN-25 , SDR-7.4 complete all as specified and as directed.Make:- SFMC or equivalent make of PRINC/FINOLEX/WET FLOW.

S&F PP-R Gate valve (Brass insert) 3 layered (outer green coloured UV stabalized , middle black coloured UV stabalized, and inner most layer white coloured with antimicrobial property ) fusion welded PP-R ( Polypropyelene random copolymer) gate valve brass 25 mm Outer dia light weight ISI marked as per pre requirement of the site with handle screwed both ends for PP-R Pipes or for unions fixed of grade PN-25 , SDR-7.4 complete all as specified and as directed.Make:- SFMC or equivalent make of PRINC/FINOLEX/WET FLOW.

M&L For making connections of PP-R distribution branch with PPR Main of outer dia of pipes 25 mm to 63 mm size by providing and fixing tee including cutting and making fusion joint etc complete all as specified and as directed by Engr-in-charge.

M & L PVC float valve of size 25 mm including fittings like tank nipple , reduser etc and complete fitting of 1000 ltr pvc water tank complete all as specified and as directed by Engr-in-charge.

M & L PVC float valve of size 40 mm including fittings like tank nipple , reduser etc and complete fitting of 1000 ltr pvc water tank complete all as specified and as directed by Engr-in-charge.

M&L Construction Brick Masonry Valve Pit of size 600x600x600 mm (Internal Dimension) one Brick thick Wall in Cement Mortar 1:4 on 100mm thick PCC 1:4:8 (40mm graded aggre-gate) in Foundation, Rendering 15mm thick internally and externally upto 150mm below GL, providing 3.0mm thick MS Sheet Valve Pit Cover, welded with 40x5mm Flat Iron Frame alround including provision of Hinges, Handle with Locking Arrangement and 40x40 x6mm Angle Iron Frame fixed on top of Valve Pit by means of holdfast 150 mm long, embedd in PCC 1:2:4 (20mm graded aggregate) Block of size 230x200x100 mm, applying two coats of Anti-corrosive Paint to all exposed Steel Surfaces over a coat of red oxide zinc chrome Primer after preparation of Surfaces and necessary Earth Work in Soft/ Loose Soil including demolition of unserviceable Valve Pit, complete all as specified and as directed.

Boring holes horizontally under Road without damaging the surface of Road (minimum 1.0 METRE below the Road Surface with the help of GI Tubing not exc. 150 mm bore (dia) for passing of pipes, complete all as specified and as directed.

S & F Tubes, ' Medium Grade ' galvanised, 50 mm bore Make:- JINDAL or equivalent make of TATA/HINDUSTAN/NEZONE.

Supply Rotational moulded polyethylene drinking water storage tanks of capacity 5000 ltr of 3 layers (cylindrical vertical with closed top) including necessary/ suitable PPC foundation of adiquet size for placing of water storage tank Make:- Sintex or equivalent make of poylcan/Rotex.

Supply and fixing Gun-metal, globe or gate valves,with iron wheelhead, screwed both ends of 50 mm bore dia,complete all as specified and as directed by Engr-in charge.

Supply & laying incl replacement of LT UG XLPE sheathed PVC insulated, screened PVC bedded, Galvanised Steel Strip of Wire armoured Electric Power Cable heavy duty with stranded Aluminium Conductor 1100 Volt grade, cross-sectional area 10 Sqmm 2 Core, laid in trenches/surface of Wall/in GI Pipe along with Pole for connec-tion to OH Lines including Brass Cable Glands Mild Steel Flat Iron Clamps, etc. and Testing, complete all as specified and as directed.Make Havells , Polycab and KEI NOTE : Earthwork, Sand Cushioning, Bricks, GI Pipe, etc. will be measured and paid under relevant Items.

S & F MCB SPN 230 volts suitable for fixing on MCB DB of capacity 40 Amps complete all as specified. Make : Model No : BB20400C of L&T or equvalent in Schneider/Indo asian/Legrand

S & F centrifugal pump set 3 HP capacity 3 phase, 415 V having suction of 65 mm dia and delivery of dia 50 mm including MS shed made up MS and CGI sheet of suitable size and diamentions for protection of external environment including PCC foundation for pump set complete all as specified. Make : Model No KDS 325 of Kirloskar or equvalent in Crompton/Havells.

RC Madan

BEE KAAY TRADERS

Markson