fabrication, dismantling of base plate and making of pump body short piece for installation of 4000GPM Pump-2 Nos.1000GPM Pump and 2400 GPM Pump of OCP NPC(ii)fabrication of cover box of Transformer 500KVA for protection of 11KV incoming and outgoing

3000 GPM Pump motor base plate set dismantling(4 head x 2 shift)(H/SK-1*954+SK-1*868+S/SK2*739)

2400 GPM Pump motor with base plate installation (4 head *2 shift)(SK-1*868,SK*739)

Making of pump body short piece(6 head *2 shift)H/SK-1*954,SK*868+4* 739

Cost of DA

Cost of Oxygen

Cost of electrode

(B) 2400 GPM Pump motor base plate set dismantling & installation of 4000 GPM pump motor set with base plate)2400 GPM Pump motor base plate set dismantling(4 head *2 shift)(H/SK-1*954+SK-1 868+S/SK-2*734

4000GPM Pump motor with base plate installation with modification of base plate(4 head *2 shift)SK-1*868+S/SK-3*734

Making of pump body short piece(4 head *2 shift)SK-1*868,S/SK*734

Cost of DA

Cost of Oxygen

Cost of electrode

(C ) 2000GPM Pump motor base plate set dismantling & installation of 1000GPM pump motor set with base plate(2000GPM Pump-motor base plate set dismantling(4 head * 2 shift(h/SK-1*954+SK-1 868+S/SK-2*734

1000 GPM Pump motor with base plate installation(6 head * 2 shift)(H/SK-1*954+SK*868,4*734

Making of pump body short piece (6 head *2 shift(H/SK-1*954+SK-868+4*734

Cost of DA

Cost of Oxygen

Cost of electrode

(D ) 4000GPM Pump motor base plate set dismantling & installation of 4000GPM pump motor set with base plate(taken from Mudidih Colleiry)(4000GPM Pump-motor base plate set dismantling(4 head * 2 shift(H/SK-1*954+SK-1* 868+ S/SK-2*734

Modification of base plate (4 head *3 shift)(H/SK-1*954+SK-3*868

4000 GPM Pump motor with base plate installation (6 head *2 shift)(H/SK-1*954+SK-1*868+4*734

Cost of DA

Cost of Oxygen

Cost of electrode

(2 )A.Fabrication of cover box for incoming & out going connection of Transformer at CHP(Collectin iron materials like 2'' angle 3.15mm M.S Sheet from different side of NPC(03 head x02 shift)(SK-1*868+S/SK-2*739)

Strainghtening of same 2'' angle and 3.15 mm sheet by hambring(03 head x 02 shift)(H/SK-954+SK-2*868

Fabrication Frame Structure Rectangle box type by 2'' angle 48''*12''*12''(03 head *03 shift)(H/SK-954+SK-2*868)

3.15 m sheet cutting as per above Rectangle box type frame and maching holes for cable nut & bolt(03 head *03 shift)(H/SK-954+SK-2*868)

Fitting same sheets with frame /structure all six side by bed fitting and painting with primer paint(03 head *03 shift)(H/SK-954+SK-2*868

Cost of DA Oxygen

Cost of electrode

Cost of Nut and bolt

(B) Fabrication of plate for 11KV Switch)Straightening same sheet and cutting 12''*30'' size 6 nos.& making hole(04 head *02 shift)(H/SK--954+SK-3*868

Cost of DA+ Oxygen

Cost of Nut and bolt

Fitting same sheet(03 head*02 shift)(H/SK-954+SK-2*868)

(3 )Fabrication of Different Pump Spare for multistage Pump 600GPM 150/160M ASBNC)(Bronze materials for casting of neck ring -8N,Neck Bush-8N Balance Valve-2N and Seating-2N& bearing 4 sets of PV-II pump

Hard Coke

Silicon Cr Cromlink,Graphite power,new link

GM/BRZ Rough Moulding,Casting Charges High Skilled

GM/BRZ Rough Moulding,Casting Charges Skilled

GM/BRZ Rough Moulding,Casting Charges S/Skilled

Machining,turning & hole making charges H/Skilled

Machining,turning & hole making charges Skilled

Machining,turning & hole making charges S/Skilled

Chipping, Griding & finishing charges H/Skilled

Chipping, Griding & finishing charges Skilled

Pattern Making Charges-4 Type

Total impact of GST for the purpose of CTC