M/o Road (M/o Footpath and Central Verge on internal/external Road in Sector-22, 23, 24,33, 33A, 34, 35, 52, 53, 54, 57, 58, 59, 60, 61, 66, 67, 68, 70, 71, 121 and 123) Noida.

Laying at or near ground level old kerb stones of all types in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement : 3 coarse sand), including making joints with or without grooves (thickness of joints, except at sharp curve, shall not be more than 5 mm), including making drainage opening wherever required etc. complete as per direction of Engineer-in-charge. (Length of finished kerb edging shall be measured for payment). (Old kerb stones shall be supplied by the department free of cost)

Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge.

Laying old cement cocrete interlocking paver blocks of any design/shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineerin- charge. (Old CC paver blocks shall be supplied by the department free of cost).

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), Including maklng joints with or w1thout grooves (thickness of Jolnts except at sharp curve shall not to more than Smm), Including making drainage opening wherever required complete etc. as per direction of Engineer-In-charge (length of finished kerb edglng shall be measured for payment). (Precast C.C. kerb stone shall be approved Uy Engineer-In-charge).

Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge..

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)

12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand )

Neat cement punning

Painting with synthetic enamel paint for approved brand and manufacture to given an even shade : Two or more coats on new work over and under coat of suitable shade with ordinary paint of approved brand and manufacture.

Painting with synthetic enamel paint for approved brand and manufacture to given an even shade : Two or more coats on new work over and under coat of suitable shade with ordinary paint of approved brand and manufacture.