Providing Internal Electrification inside the Publication Unit and the surrounding area of SCERT at Kunjaban Agartala Tripura West

Wiring for light / fan / exhaust fan / call bell point with 2 x1.5 sq. mm pvc insulated Copper conductor cable (FR) in pvc casing and capping complete with 6/10 amps modular type switch, cover plate, surface modular switch board including connection etc as required:-

Short Point :-

Medium Point :-

Long Point :-

Wiring for 2 way controlling light point with 3 x1.5 sq. mm pvc insulated Copper conductor cable (FR) in pvc casing and capping complete with 6/10 amps modular type 2 way switch, cover plate, surface modular switch board including connection etc as required:-

Long Point :-

Wiring for circuit /Sub-main with following sizes PVC insulated copper conductor cable (FR) in PVC casing and capping etc. as required.

2 X 1.5 sq mm:-

2 X 2.5 sq mm:-

2 X 4 sq mm:-

4 X 10 sq mm

Wiring for Circuit/Sub-main with the following sizes of PVC insulated Copper conductor cable (FR) in existing PVC casing capping/ conduit in recess/surface including connection etc. as required:-

1 X 1.5 sq mm:-

1 X 2.5 sq mm:-

Supplying and fixing of the following PVC cassing capping with all accessories etc. as required.

Supplying and fixing of the following electrical accessories i/c necessary conn. etc. as reqd.

Electronic 5 step fan regulator

Ceiling rose

Ding Dong call bell

32 amps DP kit kat switch

Supplying and fixing of the following sizes wooden switch boards with 3mm thick bakelite cover etc. as required.

254mm x 300mm (10" X 12") :-

Supplying and fixing of the following sizes PVC switch boards with cover etc. as required.

75mm x 75mm (3" X 3") :-

Supplying and fixing of the following sizes GI (in recess) and plastic (on surface) modular switch boards etc. as required.

8 module plastic switch board:-

12 module plastic switch board:-

Supplying and fixing of the following sizes modular type cover plates for GI/plastic modular switch boards etc. as required.

8 module :-

12 module :-

Supplying and fixing of the following modular accessories including necessary connection etc. as required.

6/10 amps two way SP switch (1M) :-

3 pin 6/10 amps socket outlet (2M):-

3/6 pin 25 amps socket outlet (2M):-

5 step fan regulator (2M):-

20/25 amps single phase motor starter switch (2M):-

Supplying and fixing of following outdoor LED luminaries in powder coated Aluminium die cast housing complete with precise street Optic Lens with heat resistant tempered glass/diffuser protection with IP66 and IK10 impact resistance including necessary connection etc. as required (with 50000 burning hours, THD ≤10% and minimum lumen output of 120lm/watt with LM79 report from NABL accrediated lab):-

100 watt LED street light fixture with integral driver and secondary lens,10kV external & 6kV internal SPD):-:-

Supplying and fixing of following outdoor LED luminaries in powder coated die cast housing complete with heat resistant tempered glass/diffuser including necessary connection etc. as required (50000 burning hours and minimum lumen output of 100 lm/watt):-

60 watt LED flood light fixture with integral driver and secondary lens (IP 66):-

Supplying and fixing of following LED Tubes, retrofit bulbs/lamps for LED luminaries including necessary connection etc. as required:-

9 watt LED retrofit lamp with polycarbonate body and aluminium heatsink :-

Supplying and installation of Bus bar chamber of the following ratings and sizes made of steel sheet enclosure with all accessories including necessary connection etc. as required:-

63 amps 415 volts four strip Copper busbar chamber 4 ways of size (330mmx280mmx100mm):-

Supplying and installation of Switch disconnector fuse unit (main switch) of the following ratings with all accessories including necessary connection etc. as required:-

63 amps 415 volts TPN main switch (rewireable):-

Supplying and installation of fuse unit kitkat/HRC/HBC of the following ratings in existing main switch/panel board including necessary connection etc as required:-

63 amps kitkat porcelain fuse unit with base(rewireable):-

Supplying and installation of powder coated steel sheet enclosure (MCB DB) suitable for 240/415 volts MCB/Isolator/ RCCB (SP/SPN/DP/TP/TPN/FP) complete with necessary bus bar, neutral link, din rail, earth bar etc i/c connection as required.

2 way SPN MCB DB (single door):-

4 way SPN MCB DB (single door):-

(2+4) / 6 way SPN MCB DB (double door):-

(2+6) / 8 way SPN MCB DB (double door):-

(2+10) / 12 way SPN MCB DB (double door):-

Supplying & installation of 10 KA breaking capacity, B/C curve MCB of following ratings in the existing MCB DB including connection as required:-

6 to 32 amps SP MCB:-

Supplying & installation of isolators of following ratings in the existing MCB DB including connection etc as required:-

40 amps DP isolator:-

Supplying and laying of the following sizes XLPE insulated PVC sheathed aluminium conductor armoured cable with necessary connection etc as required

3 core 4 Sq mm

Supplying and fixing of thermoplastic cable junction box with connectors suitable for following sizes cable : -

1.5 sqmm - 4 sqmm Cable:-

Supplying and fixing of Copper terminal ends (LUGS) - long barrel of following sizes: -

Supplying & fixing of G.I. pipe (medium gauge) bracket fabricated at suitable angle for fixing of outdoor light on wall/ RCC base with necessary MS clamp, nut, bolt etc as required:-

40 mm dia

Supplying and fixing of MS frame made of (25mm x 25mm x 5mm) MS angle with necessary support by (40mm x 6mm) MS flat and 12 mm thick marine plywood on top, grouted on wall with 4 nos legs (25mmx25mmx5mm MS angle 20 cm long) finished with red oxide and 2 coat synthetic enamel paint including necessary cc work, mending the damages & painting etc as required:-

Dismentling charges of existing old materials which are unserviceable along with cutting down of existing ceiling fans downrod. (Lum sum):

Please Enable Macros to View BoQ information