Special repairs to Bidg No P-9 (Toilet block of 26) at Mily station Calicut under AGE (I) Cannanore.

Amount

Taking down cement or cement lime plaster on brick/stone walls or in ceiling surfaces incl racking out joints hacking for key scrubbing down with water etc and removing rubbish outside MD land all as specified and directed.

M&L for rendering 15mm thick in cement mortar (1:6) on stone masonry surfaces, finished even and smooth without using extra cement all as specified and directed .

M&L for rendering 15mm thick in cement mortar (1:4) on stone masonry surfaces, finished even and smooth without using extra cement all as specified and directed .

Demolition of tiles of any description or thickness in floors, aprons etc laid and pointed in any mortar and removing debris outside MD land all as directed.

M&L for coloured joint free non-skid ceramic tiles, 7 to 8mm thick, area of each tile exceeding 0.06 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured / white cement to match laid over and including 15mm thick screed bed or bedding layer in cement mortar (1:4) all as specified and directed.

M&L for coloured joint free glazed ceramic tiles exceeding 0.06 Sqm but not exceeding 0.15 Sqm, as in skirting / dado, set and jointed in neat cement slurry and pointed in coloured / white cement to match laid over and including 10 mm thick backing on stone/brick masonry surfaces in cement mortar (1:4) all as specified and directed.

Taking down chowkats with shutters n exc. 1.5 Sqm each (without taking off shutters from the frame) all as directed.

Taking down chowkats with shutters exc. 1.5 Sqm but n.exc 4 Sqm each (without taking off shutters from the frame) all as directed.

S & F Powder coated (minimum thickness of powder coating 50 micron) aluminium frame for doors, windows, ventilators, with one or more rebates including joining cleat for fixing etc complete all as specified.

S & F Powder coated (minimum thickness of powder coating 50 micron) aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, anodized aluminium fitting such as peg stays 150 mm long (1 No) hinges type B-21, 100mm long (2 No) suitable handle (1 No) complete all as specified and as per the directions of Engineer-in-Charge.

S&F 4mm thick plain sheet glass, ordinary quality and glazing with oil putty in squares not exc 0.50 Sqm in each pane all as specified and directed.

S&F aluminium anodised sliding door bolts 250mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed

S&F stainless steel butt hinges medium weight; 100mm size as per IS 21817 fixed with stainless steel screws all as specified.

S&F 200mm long aluminum anodized barrel tower bolts of extruded section fixed with stainless steel screws all as specified.

S&F extruded aluminum alloy anodized handle fabricated type 150mm size all as specified.

M&L solid PVC door frame of sizes 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, all as specified and directed.

S&F factory made solid PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain coloured PVC “C” channel having a PVC sheet strip of 20mm width stock inside with solvent cement for stiles and plain colour PVC sheet for top rails, lock rails and bottom rails on either side and as gap insert for top rail & bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour of PVC sheet fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement etc. Details as peer specification and drawings and all as directed.

M&L complete removal of existing old treatment from wall surfaces by scapping down and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489-2004, alkali and fungal resistance , dirt resistance interior paint of approved shade with silicon additives @ 1.43 litre per 10 sqm over a coat of primer @ 0.90 litre per 10sqm all as specified and directed.

M&L applying two coats of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489-2004, alkali and fungal resistance , dirt resistance interior paint of approved shade with silicon additives @ 1.43 litre per 10 sqm over a coat of primer @ 0.90 litre per 10sqm all as specified and directed.

M&L complete removal of existing old treatment from wall surfaces by scapping down and preparation of surfaces even and smooth and applying two or more coats of first quality acrylic smooth exterior paint @ 1.67 litre per 10 sqm over a coat of exterior primer @ 2.20kg per 10sqm all as specified and directed.

M&L for preparation of newly plastered wall surfaces even and smooth and applying two or more coats of first quality acrylic smooth exterior paint @ 1.67 litre per 10 sqm over a coat of exterior primer @ 2.20kg per 10sqm all as specified and directed.

S&F 500 litres capacity rotational moulded polthylene water storage tanks(cylindrical vertical with closed top) of make Sintex/Polycon/Plasto hoisted and fixed in position including taking down unserviceable water tank all as specified in SSR Part I,2009 and directed.

S&F in repairs ball brass valves, high pressure, with polyethylene float and fly nut complete, screwed for iron pipe or brass ferrule of 25 mm bore dia all as specified and directed.

Taking up or down steel tubing and connecting including cleaning for removing to store of sizes upto 20mm bore all as directed.

Dismantling and breaking up drain pipes 75/100mm bore (cast iron) set in cement mortar any dia of pipes and removing debris outside MD land all as directed.

M&L PVC (SWR) pipe type 'B' 110mm bore single socketed with solvent cement joints laid in trenches or in floors all as specified and directed.

M&L PVC (SWR) pipe type 'B' 75mm bore single socketed with solvent cement joints laid in trenches or in floors all as specified and directed.

S&F 75 mm bore, PVC (SWR) bends with access door all as specified and directed

S&F 110 mm bore, PVC (SWR) bends with access door all as specified and directed

S&F 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal all as specified and directed

S&F in repair PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement all as specified and directed.

M&L for 75mm diameter PVC (SWR) floor trap, plain with grating including jointing with solvent cement all as specified and directed.

S&F for 15mm bore UPVC pipes of pressure rating 10 kgf / cm2, fixed complete to walls, ceilings or in floors etc. all as specified and directed.

S&F for 20mm bore UPVC pipes of pressure rating 10 kgf / cm2, fixed to wall/ceiling or on floor all as specified and directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings steps, cills, sunshades, shelves, lintels, etc; and cutting chases for concealed water tubing or concealed water tubing, etc; and making good, cutting exc. 10cm but not exc. 20cm girth in brick walls all as specified and directed.

S&F Vitreous China 1st quality Wash down water closet pan, white or ivory (excluding flushing cistern and flush type) pedestal pan and trap including connection to drain (or outgoing pipe) and to flushing pipe, anti syphonage pipe, etc complete including plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminized hinging device as fixed in repairs all as specified and directed.

S&F Vitreous China squatting pan “Orissa” pattern, of size 580 x 440 mm white, with integral foot rests, (excluding flushing cistern and flush pipe), including provision of lime concrete bedding, connection to trap and to flushing pipe, anti-syphonage pipe, etc and joint between flushing pipe and socket of WC pan, complete and making good to the floor all as specified and directed.

S&F in repairs PVC valveless, syphonic action type flushing cistern low level, 10 Litre capacity, white, with inlet, ball valve, float and handle including low or high density PVC flush pipe all as specified and directed.

S&F in repair Vitreous China Wash basin, white, flat back, size 630 x 450 mm, including CI brackets, (but excl. pillar tap) cutting for and pinning in ends of brackets or erecting stand etc complete all as specified and directed.

S&F 15mm pillar taps, fancy type, cast copper alloy with capstan heads, chromium plated , screwed down high pressure ,with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe and fixed all as specified and directed.

S&F 32mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed all as specified and directed.

Supply and fix PVC connecton 60cm long with PTMT nuts for flush tank, wash basin, etc. all as specified and directed

S&F in repairs bib tap 15mm dia, chromium plated, fancy type, cast copper alloy, screwed down, screwed for iron pipe or ferrule and complete all as directed.

S&F in repairs stop cock 15mm bore cast copper alloy, chromium plated, screwed both ends for iron pipe or for unions and screwed down, high pressure with long shank & cup complete all as specified and directed

S&F in repairs stop cock 15mm bore cast copper alloy, chromium plated, concealed type, screwed both ends for iron pipe or for unions and screwed down, high pressure with long shank & cup complete all as specified and directed

S&F in repairs stop cock 20mm bore cast copper alloy, screwed both ends for iron pipe or for unions and screwed down, high pressure with long shank & cup complete all as specified and directed

S & F in repairs brass chromium plated shower rose 125 mm dia suitable to 15mm bore pipe complete all as specified and as directed.

M & L PTMT Shower arm 15 mm size , 195 mm long with bend of 45 degree with flange, any colour (mininmum weight 40gms) complete all as specified and as directed.

S&F tubular towel rail brass, chromium plated, D type, 60cm long between flanges fixed to wall with wooden plugs with chromium plated brass screws all as specified and directed.

S&F mild steel chromium plated Health faucet (ABS body), suitable for 15mm dia pipe with flexible LDPE pipe with jet of 1.25m long on one end and socket joint of 15 mm dia on other end including ABS wall hook complete all as specified and directed.

S & F in repairs brass chromium plated soap dish, any pattern, fixed to wall with wooden plugs and chromium plated brass screws all as specified and directed.

Taking down carefully copper/aluminium point wiring of light, fan, socket or power complete, including fittings such as switches, ceiling roses, pendants, regulators, sockets etc. and making good disturbed surfaces of walls, floor ceiling etc. all as directed

M&L Point wiring complete with 1.5 Sq mm single core PVC insulated unsheathed copper conductor FRLSH cable multi stranded 1100 Volt grade drawn through and including non metallic rigid PVC conduit concealed to wall and fixed to ceiling/roof etc with necessary fixing accessories such as bend elbow socket etc with fixing material including terminal box made out of 1.22mm thick MS sheet concealed in wall covered with bakalite/plastic laminated sheet top cover of 3mm thick cadmium plated screws with cup washer including 1.5Sqmm single core PVC insulated un sheathed copper conductor FRLS cable multi stranded 1100Volt grade as earth continuity conductor green in colour connected to common earth dolly complete all as specified and as directed for One light/fan/bell point controlled by one switch. Note : (a) wiring shall be done by using colour code ie. Red, Yellow, Blue and earth wire shall be green colour. (b) quoted rate included cutting chases for fixing conduit.

All as per item No. 54 on here in before but for one 3 pin 15 amp socket on independent board with 2.5Sqmm unsheathed PVC insulated copper conductor FRLS cable including 2.5 Sqmm PVC insulated copper cable for earth continuity conductor complete all as specified.

Taking down old unservicaeble submain wiring any size cable including conduit , batten etc and making good disturbed surfaces of walls, floor ceiling etc. all as directed

S & F switch piano flush type, single pole, one way, 5 Amps, 240 volt including connecting up electrically complete all as specified and as directed.

S & F PVC ceiling rose round shape, three terminals, polycarbonate, isolated body including connecting up electrically all as specified and as directed.

S & F switch piano flush type, single pole, one way, 15 Amps, 240 volt including connecting up electrically complete all as specified and as directed.

S & F socket 5pin 5/15 Amps, multipurpose, flush type, non-interlocking type, including connecting up electrically complete all as specified and directed.

Taking down unserviceable fluorescent tube light fittings and fixing only LED light fittings with extruded polycarbonate, heat sink, environmental friendly, energy efficient ready to use pack of 4 feet 20 W, LED batten, 6500K, of cat part No LDO0103031 INTENSO LXS LED of Havells or techno equivalent in CG or Bajaj and including connecting up with twin core twisted copper flexible conductor cable of sutibale size all as directed.

Taking down unserviceable fluorescent tube light fittings and fixing only LED light fittings with extruded polycarbonate, heat sink, environmental friendly, energy efficient ready to use pack of 2 feet 10 W, LED batten, 6500K, of cat part No LDO0103025 INTENSO LXS LED batten of Havells or techno equivalent in CG or Bajaj and including connecting up with twin core twisted copper flexible conductor cable of sutibale size all as directed.

M&L for sub main wiring with two runs of single core 6 Sq mm copper conductor FRLS cable, ISI marked, PVC insulated, unsheathed multistanded, 1100 V grade drawn through and including non metallic rigid PVC conduit 25mm dia, ISI marked with all accessories such as bend,elbow,socket,tee saddles etc fixed concealed to wall / fixed to ceiling, including cutting chases etc including 6 Sq mm single core copper conductor FRLS cable PVC insulated, unsheathed multistranded 1100 V grade as earth continuity conductor connected to common earth dolly complete all as specified and directed. Note :- (i) 3 runs of 6 Sq mm copper cable and one run of PVC conduit will be measured as one length. (ii) wiring shall be done by using colour code ie. Red, Yellow, Blue and earth wire shall be green colour.

S & F MCB SPN, 230 Volt, 40 to 63Amps, B series, breaking capacity 10KA including electrically connecting up using wiring lugs all as specified and directed.

S & F MCB SP, 240 Volt, 6 to 32Amps B series breaking capacity 10KA including electrically connecting up using wiring lugs all as specified and directed.

S & F sheet metal powder coated enclosure factory made for MCB DB, SPN 8 way with 200 Amps bus bar, 240 Volt, double door type, conform to IS 13032-1991 fixed/flushed on wall including electrically connecting up and taking down old unserviceable DB complete all as specified and directed.

S & F light fitting bulk head type ABS body suitable for and including CF lamp and choke 10 Watt and connecting up electrically complete all as specified and directed.

M&L for Earthing complete with using GI earth plate electrode 600x600x6 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 mtr below normal ground level and earth plate surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness off 15 cm all around the plate with using 4 mm dia GI Wire as earth lead moulded and retreived to earth plate at one end and connected to main switch / control board at another end with and including 15 mm dia GI light grade from upper end of earth plate upto external face of the wall of the building including 20 mm dia bore GI pipe light grade as water pipe from chamber to upper edge of the plate GI funnel with wire mess fixed on water pipe and provison of PCC 1:2:4 type B-1 (Using 20 mm Dia graded stone aggregate) duly reinforced with mild steel round bar 6 mm dia @ 150 mm c/c both ways with 10 mm dia mild steel bars as in lifting handle with and including necessarry excavation and earth work including laying the pipe concealed in floor / wall allas per plate NO-3 of SSR Part-I complete all as specified and directed and testing on completiopn (Note:- If the desired resistance is not found earthing shall be redone by the contractor at no extra cost to Govt).

Supply and fix 25W LED Street Light luminaire, 6500K made up of pressure Die Cast aluminum housing with black epoxy polyester powder coating for long life, IP66 for Optical Compartment covered with heat resistant toughened glass for safety and Control Gear Compartment, multiple LEDs to get sufficient light output, Integral type, 150V to 270V. Driver shall be of isolated type with Constant Current Constant Voltage topology to ensure optimum driving of LEDs. Make : Havells of cat No ENDURACITYLINER NEO SL25W LED or TECHNOCOMMERCIALLY equivalent of Bajaj/ Crompton and electrically connecting up including taking down old unserviceable light all as directed

Supply and fixing brackets for street light fitting made of 50 mm bore GI pipe medium grade 1.5m long bend to shape and fixed with flat iron clamps 25x 4mm thick, two Nos nuts, bolts inclding taking down U/s brackets complete all as specified and as directed.

JESWIN BUILDERS

NKS INFRATECH