Repairing of SLR and DILR Office at Valsad Dist:-Valsad

Name of work :-

Repairing of SLR and DILR Office at Valsad Dist:-Valsad

Bill of Quantities

(A) Percentage Rate Tender (Up to INR 50 Cr. )

Memorandum showing items of work to be carried out

Item Item of work Quantity Unit In figure Amount

1 Dismentaling of sheet roofing including ridges, Hips,Valleys, 105.00 Sqmt 53.45

Gutters etc. stacking of serviceable materilas and disposal of

unserviceable materials with all lead and lift.(ii) PVC sheet roofing.

2 Dismentaling tiled of stone floors laid in mortar including stacking 10.00 Sqmt 48.21

of serviceable materilas and disposal of unserviceable materials

with all lead and lift.

3 Applying general insecticide pest control treatment to 105.00 Sqmt 89.28

floor,cupboards etc including labour materials etc.complete.using

lmidacloprid 30.5 Scas per IS 6313 part -III ( 0.075% concentration

by mass ) is recommended 10.5ml chemical diluted with 5 liter of

water application 0.5 liter chemical / Sqm of surface is

recommended as per I.S.

4 Providing & fixing Wall Cupboard of size 0.90 x 3.00 x 0.60 mt. 4.00 Sqmt 7395.22

made of 19 mm thick allproof plywood which BWR confirming to IS

710 of green or century make, designs & grooves as directed by

architectural drawings including two drawers size of 0.45 x 0.55 x

0.15 mt, two shutter size of 0.45 x 3.00 mt and 19mm thick

allproof plywood which BWR confirming to IS 710 of green or

century make self fixing at horizontal and vertical support and

lamination of 1.0 mm thick in single or double shade of green,

broom or equivalent make of plain or texture finish as directed on

all visible face including on teak wood batten patti and 0.80 mm

white lamination on all non visible faces & remaining faces.

Telescopic sliding channel made of Hettich or equivalent, S.S.

sliding rail made or equivalent, S.S. Decorative handle, S.S.stopper,

S.S.pipe, good quality lock with necessary fixtures & fasteners of

standard make as per detail drawing and image also including all

labours as approved by engineer-in-charge etc. complete.

5 Providing and fixing Roller blinds of made out of imported fabric 24.00 Sqmt 3440.06

including channels ropes runners, weights etc as per design and

installed as per with proper fixing as directed by engineer in charge

6 Providing & Supplying Executive Table having size of 4.40 mm X 20.00 Sqmt 8851.64

900 mm X750mm (Height) with Top 12mm toughened glass in

required size including three drawers and 1350 mm X 400 mm

X550mm (Height)Side Rack with three shutter storage cabinet.

teakwood leg support and 1 mm lamination in single or double

shade & colour as directed on all visible face and 0.80 mm white

lamination on all non visible faces Hettich make telescopic sliding

channel, Enox make S.S. sliding rail, S.S. Decorative handle, Ebco

make Keyboard tray with necessary fixtures & fasteners of

standard make as per detail drawing and image also including all

labours as approved by engineer-in-charge etc. complete.

2 Dismentaling tiled of stone floors laid in mortar including stacking 10.00 Sqmt 48.21

of serviceable materilas and disposal of unserviceable materials

with all lead and lift.

3 Applying general insecticide pest control treatment to 105.00 Sqmt 89.28

floor,cupboards etc including labour materials etc.complete.using

lmidacloprid 30.5 Scas per IS 6313 part -III ( 0.075% concentration

by mass ) is recommended 10.5ml chemical diluted with 5 liter of

water application 0.5 liter chemical / Sqm of surface is

recommended as per I.S.

4 Providing & fixing Wall Cupboard of size 0.90 x 3.00 x 0.60 mt. 4.00 Sqmt 7395.22

made of 19 mm thick allproof plywood which BWR confirming to IS

710 of green or century make, designs & grooves as directed by

architectural drawings including two drawers size of 0.45 x 0.55 x

0.15 mt, two shutter size of 0.45 x 3.00 mt and 19mm thick

allproof plywood which BWR confirming to IS 710 of green or

century make self fixing at horizontal and vertical support and

lamination of 1.0 mm thick in single or double shade of green,

broom or equivalent make of plain or texture finish as directed on

all visible face including on teak wood batten patti and 0.80 mm

white lamination on all non visible faces & remaining faces.

Telescopic sliding channel made of Hettich or equivalent, S.S.

sliding rail made or equivalent, S.S. Decorative handle, S.S.stopper,

S.S.pipe, good quality lock with necessary fixtures & fasteners of

standard make as per detail drawing and image also including all

labours as approved by engineer-in-charge etc. complete.

7 Providing & Supplying Office Table having size of 3.35 mm X 900 16.00 Sqmt 10134.34

mm X750mm (Height) with Top 12mm toughened glass in required

size including three drawers and 1350 mm X 400 mm X550mm

(Height)Side Rack with three shutter storage cabinet. teakwood

leg support and 1 mm lamination in single or double shade &

colour as directed on all visible face and 0.80 mm white lamination

on all non visible faces Hettich make telescopic sliding channel,

Enox make S.S. sliding rail, S.S. Decorative handle, Ebco make

Keyboard tray with necessary fixtures & fasteners of standard

make as per detail drawing and image also including all labours as

approved by engineer-in-charge etc. complete.

8 Providing & fixing for making partition (including 12 mm Glass & 76.00 Sqmt 4054.14

Glass door with Floor Spring) having 12 mm thick Marin plywood

both side of aluminum framing. Aluminum framing size for vertical

& horizontal support is 50mm X 50mm (5.50gm/cmt) made by

aluminium jindal section of 16guage having grid of 600mm X

600mm and all exposed surfaces finished with 1.00 mm thick

laminate of approved shade without any air gap and grooving as

per design. Before installation, make hole /face plate for conduit

pipes of electical/networking cables with open able stud from

partition including all materials and labor etc. Make necessary

grooves as per shown in drawing. All bottom ends are covered

with Ghana teak bidding patti finished with laminate complete

with all necessary hardware & adhesives as per details given in

drawing and as per instructions of Engineer in charge. Contractor

has to provide all necessary cut outs ( race ways .) for electical

works & no extra payment shall be made for it.

2 Dismentaling tiled of stone floors laid in mortar including stacking 10.00 Sqmt 48.21

of serviceable materilas and disposal of unserviceable materials

with all lead and lift.

3 Applying general insecticide pest control treatment to 105.00 Sqmt 89.28

floor,cupboards etc including labour materials etc.complete.using

lmidacloprid 30.5 Scas per IS 6313 part -III ( 0.075% concentration

by mass ) is recommended 10.5ml chemical diluted with 5 liter of

water application 0.5 liter chemical / Sqm of surface is

recommended as per I.S.

4 Providing & fixing Wall Cupboard of size 0.90 x 3.00 x 0.60 mt. 4.00 Sqmt 7395.22

made of 19 mm thick allproof plywood which BWR confirming to IS

710 of green or century make, designs & grooves as directed by

architectural drawings including two drawers size of 0.45 x 0.55 x

0.15 mt, two shutter size of 0.45 x 3.00 mt and 19mm thick

allproof plywood which BWR confirming to IS 710 of green or

century make self fixing at horizontal and vertical support and

lamination of 1.0 mm thick in single or double shade of green,

broom or equivalent make of plain or texture finish as directed on

all visible face including on teak wood batten patti and 0.80 mm

white lamination on all non visible faces & remaining faces.

Telescopic sliding channel made of Hettich or equivalent, S.S.

sliding rail made or equivalent, S.S. Decorative handle, S.S.stopper,

S.S.pipe, good quality lock with necessary fixtures & fasteners of

standard make as per detail drawing and image also including all

labours as approved by engineer-in-charge etc. complete.

9 Chair for HOD 10.00 Nos 11615.00

Providing & Supplying Medium Back Executive Revolning Chair of

HOF, Alto, Nilkamal or equivalent company make office chair of

make size with medium back (25 mm thick U foam inside) on Mild

steel crome plated base anti tilt mechanisum frame High quality

product, Tilt mechanism with tiltlocking , moulded foam seat &

back penumatic height Adjustment Upholstered in high quality

leather Swivel Mechanisum & Twin wheel casters with , Great

finish, Dimensions in mm seat Height 470mm to 550mm Width

26'inch & depth 23'inch height 17'inch , decorative wooden with

dunlop sheet arms - its lowest height is 36 inches and heighest is

41 inches Product, Made from strong sturdy material and colour as

per suggested by Engineer in Charge or image. Chair should

confirm ANSI BIFMA Standards.

2 Dismentaling tiled of stone floors laid in mortar including stacking 10.00 Sqmt 48.21

of serviceable materilas and disposal of unserviceable materials

with all lead and lift.

3 Applying general insecticide pest control treatment to 105.00 Sqmt 89.28

floor,cupboards etc including labour materials etc.complete.using

lmidacloprid 30.5 Scas per IS 6313 part -III ( 0.075% concentration

by mass ) is recommended 10.5ml chemical diluted with 5 liter of

water application 0.5 liter chemical / Sqm of surface is

recommended as per I.S.

4 Providing & fixing Wall Cupboard of size 0.90 x 3.00 x 0.60 mt. 4.00 Sqmt 7395.22

made of 19 mm thick allproof plywood which BWR confirming to IS

710 of green or century make, designs & grooves as directed by

architectural drawings including two drawers size of 0.45 x 0.55 x

0.15 mt, two shutter size of 0.45 x 3.00 mt and 19mm thick

allproof plywood which BWR confirming to IS 710 of green or

century make self fixing at horizontal and vertical support and

lamination of 1.0 mm thick in single or double shade of green,

broom or equivalent make of plain or texture finish as directed on

all visible face including on teak wood batten patti and 0.80 mm

white lamination on all non visible faces & remaining faces.

Telescopic sliding channel made of Hettich or equivalent, S.S.

sliding rail made or equivalent, S.S. Decorative handle, S.S.stopper,

S.S.pipe, good quality lock with necessary fixtures & fasteners of

standard make as per detail drawing and image also including all

labours as approved by engineer-in-charge etc. complete.

10 Providing and fixing eco-friendly light weight calcium silicate false 154.00 Sqmt 1648.96

ceiling tiles having Tegular edge & 15 mm Thick Densified edges on

the Tile Periphery for Extra Strength The Light weight calcium

silicate ceiling tiles shall have, light reflection 85% non-

combustible as per B.S. 476 part IV, 100% humidity resistance and

also having thermal conductivity0.043° w/m KC.for the best

thermal Insulation. The Light weight calcium Silicate tile shall be of

approved texture Fine fissured/ Spintone/ Cosmos having NRC

value of 0.5 & Globe having NRC value of 0.75 NRC or equivalent of

size 595 X 595 mm to be laid on true horizontal level suspended

inter locking metal grid of hot dipped galvanized steel sections

(galvanizing @120 grams per sqm including both side) consisting

of main ‘T’ runner suitably spaced at joints to get required length

and size of 24 X 38mm made from 0.30 mm thick (minimum)

sheet, 1200mm centre to centre, and cross ‘T’ of size 24 X 28mm

made out of 0.33mm (Minimum) sheet spaced 1200mm along

spaced between main 'T' at 600mm centre to centre to form agrid

of 1200x600mm and size 24x48mm made of 0.30mm thick

(Minimum) sheet to be interlocked at middle of the 1200x600mm

panel to form grid of size 600x600mm resting on periphery

walls/partitions on a perimeter wall angle pre-coated steel of size

(24x24x3000mm made of 0.40mm thick (minimum) sheet with the

help of rawl plugs at 450mm centre to centre with 25mm long dry

wall screws @ 230mm interval and laying 15mm thick densified

edges light weight calcium silicate ceiling tiles of approved texture

(Fine fissured/Cosmos/ Spintone) in the grid including

2 Dismentaling tiled of stone floors laid in mortar including stacking 10.00 Sqmt 48.21

of serviceable materilas and disposal of unserviceable materials

with all lead and lift.

3 Applying general insecticide pest control treatment to 105.00 Sqmt 89.28

floor,cupboards etc including labour materials etc.complete.using

lmidacloprid 30.5 Scas per IS 6313 part -III ( 0.075% concentration

by mass ) is recommended 10.5ml chemical diluted with 5 liter of

water application 0.5 liter chemical / Sqm of surface is

recommended as per I.S.

4 Providing & fixing Wall Cupboard of size 0.90 x 3.00 x 0.60 mt. 4.00 Sqmt 7395.22

made of 19 mm thick allproof plywood which BWR confirming to IS

710 of green or century make, designs & grooves as directed by

architectural drawings including two drawers size of 0.45 x 0.55 x

0.15 mt, two shutter size of 0.45 x 3.00 mt and 19mm thick

allproof plywood which BWR confirming to IS 710 of green or

century make self fixing at horizontal and vertical support and

lamination of 1.0 mm thick in single or double shade of green,

broom or equivalent make of plain or texture finish as directed on

all visible face including on teak wood batten patti and 0.80 mm

white lamination on all non visible faces & remaining faces.

Telescopic sliding channel made of Hettich or equivalent, S.S.

sliding rail made or equivalent, S.S. Decorative handle, S.S.stopper,

S.S.pipe, good quality lock with necessary fixtures & fasteners of

standard make as per detail drawing and image also including all

labours as approved by engineer-in-charge etc. complete.

11 Wall Punning : Providing and applying Plasto XP Gypsum Plaster 179.00 Sqmt 238.36

(USG Boral) or equivalent make, minimum 12 mm thick in wall and

minimum 6mm thick in ceiling, including all labours, tools, tackels,

scafollding, surface preparation, mixing of material, transportation

(lead & lift) applying in position, levelling, finishing, cleaning etc.

complete to satisfaction of Engineer in charge. The rate also

include making of Grooves above skirting, Dedo Tiles and around

window and door jambs etc. (cost of bonding agent to the ceiling

or RCC surfaces is to be included in the item) item shall be used as

per instruction of engineer in charge.

12 Constructing Sandwitch Platform of 18 mm thick Polished Black 6.00 Sqmt 2740.13

Granite at top and 25 mm thick Kota stone slab one side polished

at bottom with cementing Materials / adhsives including makeing

necessary grooves in walls with Vertical sandwich two Kotastone

25 mm support every 60 cm centre to centre or as required

including all labour material of approved quality incl. full

moulded round front edge granite strip of one side polished and

jointed with grey cement slurry including rubbing and polishing

etc. complete for all floors

13 Providing and fixing kitchen platform trolley having three drawers 4.00 Sqmt 10222.21

of SS (IS 304) of required size like thali, katleri, perforated,

partition, cupsosar type in kitchen platform having drawer front

side by using 19mm thick all proof plywood of ISI quality all side

mm thick laminated & PVC Beading on Periphery etc. as directed.

The size of SS (IS 304) basket of size 4" to 18" for thali, dish, katleri,

perforated, partition, cupsosar type as directed including

necessary S.S. fittings, handles, nobs, telescopic channels, etc. as

2 Dismentaling tiled of stone floors laid in mortar including stacking 10.00 Sqmt 48.21

of serviceable materilas and disposal of unserviceable materials

with all lead and lift.

3 Applying general insecticide pest control treatment to 105.00 Sqmt 89.28

floor,cupboards etc including labour materials etc.complete.using

lmidacloprid 30.5 Scas per IS 6313 part -III ( 0.075% concentration

by mass ) is recommended 10.5ml chemical diluted with 5 liter of

water application 0.5 liter chemical / Sqm of surface is

recommended as per I.S.

4 Providing & fixing Wall Cupboard of size 0.90 x 3.00 x 0.60 mt. 4.00 Sqmt 7395.22

made of 19 mm thick allproof plywood which BWR confirming to IS

710 of green or century make, designs & grooves as directed by

architectural drawings including two drawers size of 0.45 x 0.55 x

0.15 mt, two shutter size of 0.45 x 3.00 mt and 19mm thick

allproof plywood which BWR confirming to IS 710 of green or

century make self fixing at horizontal and vertical support and

lamination of 1.0 mm thick in single or double shade of green,

broom or equivalent make of plain or texture finish as directed on

all visible face including on teak wood batten patti and 0.80 mm

white lamination on all non visible faces & remaining faces.

Telescopic sliding channel made of Hettich or equivalent, S.S.

sliding rail made or equivalent, S.S. Decorative handle, S.S.stopper,

S.S.pipe, good quality lock with necessary fixtures & fasteners of

standard make as per detail drawing and image also including all

labours as approved by engineer-in-charge etc. complete.

14 Wall painting (Two coats) with plastic emulsion paint of approved 233.00 Sqmt 80.35

brand and manufacture on undecorated wall surface to give an

even shade including throughly brushing the surface free from

mortar droppings and other foreign matter and sand papered

15 Wall painting (Two coats) with plastic emulsion paint of approved 105.00 Sqmt 85.76

brand and manufacture on undecorated ceiling surface to give an

even shade including throughly brushing the surface free from

mortar droppings and other foreign matter and sand papered

16 Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse 1.00 Cumt 3683.34

sand : 4- graded stone aggregates 20 mm nominal size) and curing

complete excluding cost of formwork in (A) Foundation and Plinth

17 P & L 60x60 cm. Matt Finished Ceramic Tiles 6 mm thick in flooring 10.00 Sqmt 917.25

treads of steps and landing laid on a bed of 12 mm thick cement

mortar 1:3(1-cement:3-coarse sand)finishing with flush pointing in

colour cement slurry etc. complete. Colour and Shade approved

by Engineer-In-Charge

18 P & L 30x60 cm. Glazed Tiles 6 mm thick in skirting risers of steps 35.00 Sqmt 1073.90

and dedo on 10 mm thick cement plaster 1:3 (1-cement:3coarse

sand) and jointed with colour cement slurry

19 Brick work using common burnt clay building bricks crushing 3.00 Cumt 1114.09

strength not less than 35 Kg/Sq.cm. in super structure in cement

mortar 1:6 (1cement : 6 fine sand) (B) Conventional For First Floor

20 Providing 15mm thick cement plaster in single coat on Rough 54.00 Sqmt 213.10

(Similar) side of single or half birck walls / concrete wall for interior

plastering and finished even and smooth in C M 1:4 (1 cement :

coarse sand) with floting coat of neat cement slurry etc. comp. For

2 Dismentaling tiled of stone floors laid in mortar including stacking 10.00 Sqmt 48.21

of serviceable materilas and disposal of unserviceable materials

with all lead and lift.

3 Applying general insecticide pest control treatment to 105.00 Sqmt 89.28

floor,cupboards etc including labour materials etc.complete.using

lmidacloprid 30.5 Scas per IS 6313 part -III ( 0.075% concentration

by mass ) is recommended 10.5ml chemical diluted with 5 liter of

water application 0.5 liter chemical / Sqm of surface is

recommended as per I.S.

4 Providing & fixing Wall Cupboard of size 0.90 x 3.00 x 0.60 mt. 4.00 Sqmt 7395.22

made of 19 mm thick allproof plywood which BWR confirming to IS

710 of green or century make, designs & grooves as directed by

architectural drawings including two drawers size of 0.45 x 0.55 x

0.15 mt, two shutter size of 0.45 x 3.00 mt and 19mm thick

allproof plywood which BWR confirming to IS 710 of green or

century make self fixing at horizontal and vertical support and

lamination of 1.0 mm thick in single or double shade of green,

broom or equivalent make of plain or texture finish as directed on

all visible face including on teak wood batten patti and 0.80 mm

white lamination on all non visible faces & remaining faces.

Telescopic sliding channel made of Hettich or equivalent, S.S.

sliding rail made or equivalent, S.S. Decorative handle, S.S.stopper,

S.S.pipe, good quality lock with necessary fixtures & fasteners of

standard make as per detail drawing and image also including all

labours as approved by engineer-in-charge etc. complete.

21 Providing and fixing FRP frame size 100 x 50 mm and 28 mm thick 2.00 Sqmt 2377.76

FRP depress panel Single shutter having extra reinforcement on

sides & edges in Gel coat finish.The core of the shutter & frame is

to be filed up with injected fire retradat grade polyurethene foam

done in situ along with embeded wooden pieces for stiffening &

also taking hinges & fintures.The whole FRP frame & shutter is to

be waterproof, weatherproof ,termite proof & resistance to mild

acid/alkali.Rates are to be inclusive of S.S hinges with necessary

screws & alluminum fixtures & fastenings & fartener sleeve.Colour

and Shade approved by Engineer-In-Charge. FRP Door

22 Providing laying and jointing in true line and level 40mm dia. 10.00 Rmt 148.12

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the wall

with the help of MS Z clamp at every two metre C/C or shall be

concelled as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

23 Providing laying and jointing in true line and level 25mm dia. 5.00 Rmt 91.84

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the wall

with the help of MS Z clamp at every two metre C/C or shall be

concelled as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

2 Dismentaling tiled of stone floors laid in mortar including stacking 10.00 Sqmt 48.21

of serviceable materilas and disposal of unserviceable materials

with all lead and lift.

3 Applying general insecticide pest control treatment to 105.00 Sqmt 89.28

floor,cupboards etc including labour materials etc.complete.using

lmidacloprid 30.5 Scas per IS 6313 part -III ( 0.075% concentration

by mass ) is recommended 10.5ml chemical diluted with 5 liter of

water application 0.5 liter chemical / Sqm of surface is

recommended as per I.S.

4 Providing & fixing Wall Cupboard of size 0.90 x 3.00 x 0.60 mt. 4.00 Sqmt 7395.22

made of 19 mm thick allproof plywood which BWR confirming to IS

710 of green or century make, designs & grooves as directed by

architectural drawings including two drawers size of 0.45 x 0.55 x

0.15 mt, two shutter size of 0.45 x 3.00 mt and 19mm thick

allproof plywood which BWR confirming to IS 710 of green or

century make self fixing at horizontal and vertical support and

lamination of 1.0 mm thick in single or double shade of green,

broom or equivalent make of plain or texture finish as directed on

all visible face including on teak wood batten patti and 0.80 mm

white lamination on all non visible faces & remaining faces.

Telescopic sliding channel made of Hettich or equivalent, S.S.

sliding rail made or equivalent, S.S. Decorative handle, S.S.stopper,

S.S.pipe, good quality lock with necessary fixtures & fasteners of

standard make as per detail drawing and image also including all

labours as approved by engineer-in-charge etc. complete.

24 Providing laying and jointing in true line and level 15mm dia. 5.00 Rmt 72.65

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the wall

with the help of MS Z clamp at every two metre C/C or shall be

concelled as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

25 Providing, laying and jointing in true line and level 110 diametre 5.00 Rmt 836.73

U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain

and other end socketed with rubber ring, & fittings conforming to

ISI 14735-1999 of approved make for drainage system pipe line,

pipe shall be jointed with each other with rubber lubricant, pipe

shall be fixed on wall using of Special type on Clamping system

made out From Z Clamps with nut/bolt wall Clips etc. of the size

110 mm diametre x 149 mm length x 145 mm heigh at every

mm center to center or shall be concealed in walls as directed

including necessary fittings such as bends, shoes etc. including

testing of pipes and joints and jointed with adhesive solvent

cement including cost of all materials.

26 Providing, laying and jointing in true line and level 75 mm dia. 5.00 Rmt 698.92

UPVC SWRType B pipe conforming to IS 13592-1992 with one end

plain and other end socketed with rubbering and fitting

conforming to ISI 14735-1999 of approved make for drainage

system pipe line, pipe shall be jointed with each other with rubber

lubricant, pipe shall be fixed on wall using of PVC clamp at every

2000 mm c/c or shall be conceled in walss as directed including

necessary fittings such as bends, shoes etc. including testing of

pipes and joints and jointed with adhesive solvent cement

including cost of all materials.

2 Dismentaling tiled of stone floors laid in mortar including stacking 10.00 Sqmt 48.21

of serviceable materilas and disposal of unserviceable materials

with all lead and lift.

3 Applying general insecticide pest control treatment to 105.00 Sqmt 89.28

floor,cupboards etc including labour materials etc.complete.using

lmidacloprid 30.5 Scas per IS 6313 part -III ( 0.075% concentration

by mass ) is recommended 10.5ml chemical diluted with 5 liter of

water application 0.5 liter chemical / Sqm of surface is

recommended as per I.S.

4 Providing & fixing Wall Cupboard of size 0.90 x 3.00 x 0.60 mt. 4.00 Sqmt 7395.22

made of 19 mm thick allproof plywood which BWR confirming to IS

710 of green or century make, designs & grooves as directed by

architectural drawings including two drawers size of 0.45 x 0.55 x

0.15 mt, two shutter size of 0.45 x 3.00 mt and 19mm thick

allproof plywood which BWR confirming to IS 710 of green or

century make self fixing at horizontal and vertical support and

lamination of 1.0 mm thick in single or double shade of green,

broom or equivalent make of plain or texture finish as directed on

all visible face including on teak wood batten patti and 0.80 mm

white lamination on all non visible faces & remaining faces.

Telescopic sliding channel made of Hettich or equivalent, S.S.

sliding rail made or equivalent, S.S. Decorative handle, S.S.stopper,

S.S.pipe, good quality lock with necessary fixtures & fasteners of

standard make as per detail drawing and image also including all

labours as approved by engineer-in-charge etc. complete.

27 Providing and fixing MS Z clamp on Wall or celling for Pipe Fitting 10.00 No 70.70

including all type necessary fittings and accessories etc. completed

as per directed engineer in charge.

28 Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 2.00 No 571.08

mm diameter with jali of the following nominal diameter of self

cleansing design with C.I scread down or hinged grating including

the cost of cutting and making good the walls.

29 Providing and fixing wash down water closet dual flushing system 1.00 No 4189.48

type (European type W C pan) with integral P and S trap including

jointing the trap with soil pipe in cement mortar 1:1 (1 cement five

sand) including providing and fixing plastic seat cover for wash

down WC with CP brass hinges and rubber buffers back plastic seat

and including providing and fixing PVC flushing tank with a pair of

C I or MS bracket with complete fitting such as lead valve siphon

15 mm dia brass ball valve with polythene float CP brass handle

unions and couplings for connection with inlet out let and over

flow pipes 40 mm dia porcelain enameled flush bend including

cutting holes in walls and making good the same connection the

flush bend with cistern and closet vitreous china.

30 Providing and fixing brass screw down stop tap.(A) 15mm dia. 1.00 No 205.83

31 Providing and fixing brass screw down stop tap.(C) 25mm dia. 1.00 No 220.82

32 Providing and fixing washbasin with single hole for pillar tap with 1.00 No 1506.45

C.I. or M.S. brackets painted white including sutting holes and

making good the same but excluding fittings.(A) Vitreous China:(ii)

Flat Back washbasin 550 mm x v 400mm size. (i) In white colour.

33 Providing and fixing C.P. brass waste for washbasin or sink. (A) 1.00 No 67.91

2 Dismentaling tiled of stone floors laid in mortar including stacking 10.00 Sqmt 48.21

of serviceable materilas and disposal of unserviceable materials

with all lead and lift.

3 Applying general insecticide pest control treatment to 105.00 Sqmt 89.28

floor,cupboards etc including labour materials etc.complete.using

lmidacloprid 30.5 Scas per IS 6313 part -III ( 0.075% concentration

by mass ) is recommended 10.5ml chemical diluted with 5 liter of

water application 0.5 liter chemical / Sqm of surface is

recommended as per I.S.

4 Providing & fixing Wall Cupboard of size 0.90 x 3.00 x 0.60 mt. 4.00 Sqmt 7395.22

made of 19 mm thick allproof plywood which BWR confirming to IS

710 of green or century make, designs & grooves as directed by

architectural drawings including two drawers size of 0.45 x 0.55 x

0.15 mt, two shutter size of 0.45 x 3.00 mt and 19mm thick

allproof plywood which BWR confirming to IS 710 of green or

century make self fixing at horizontal and vertical support and

lamination of 1.0 mm thick in single or double shade of green,

broom or equivalent make of plain or texture finish as directed on

all visible face including on teak wood batten patti and 0.80 mm

white lamination on all non visible faces & remaining faces.

Telescopic sliding channel made of Hettich or equivalent, S.S.

sliding rail made or equivalent, S.S. Decorative handle, S.S.stopper,

S.S.pipe, good quality lock with necessary fixtures & fasteners of

standard make as per detail drawing and image also including all

labours as approved by engineer-in-charge etc. complete.

34 Providing and fixing M.I. fisher union for washbasin or sink. (A) 1.00 No 78.75

35 Providing and fixing 600mm x 450mm bevelled edge mirrror of 1.00 No 833.73

superior glass mounted on 6mm thick A.C. sheet or plywood sheet

and fixing to wooden pluge with C.P. brass screws and washers.

36 Providing and fixing C.P. brass towel rail comlete with C.P. brass 1.00 No 603.19

brackets fixed to wooden plugs with C.P. brass scews (B) 600mm x

37 Providing and fixing screw down bib taps of following size.(A) Brass 1.00 No 186.83

screw down bib tap polished bright. (i) 15mm dia.

38 Providing and fixing pillar tap, capstan head, screw down high 1.00 No 308.73

pressure with screws, shanks and back nuts. (i) 15mm dia.

Rupees Thirteen Lakh(s) Sixty Two Thousand Eight Hundred And Paise Fifty One Only

I/We am/are willing to carry out the work at………% above/below percent(Should be written in figures and

words) of the estimated rate mentioned above. Amount of my /our tender works out as under.

Estimated amount put to tender 1362800.51 Estimated amount put to

Deduct :………% below Add :………% Above

In words : In words :

1 The Credit Value of Dismentalled Materials of Amount Rs.2780.00 (Rupees Two Thousand

Seven Hundred Eighty Only) shall be recovered from the 1st Running Bill of the Contractor.

2 Dismentaling tiled of stone floors laid in mortar including stacking 10.00 Sqmt 48.21

of serviceable materilas and disposal of unserviceable materials

with all lead and lift.

3 Applying general insecticide pest control treatment to 105.00 Sqmt 89.28

floor,cupboards etc including labour materials etc.complete.using

lmidacloprid 30.5 Scas per IS 6313 part -III ( 0.075% concentration

by mass ) is recommended 10.5ml chemical diluted with 5 liter of

water application 0.5 liter chemical / Sqm of surface is

recommended as per I.S.

4 Providing & fixing Wall Cupboard of size 0.90 x 3.00 x 0.60 mt. 4.00 Sqmt 7395.22

made of 19 mm thick allproof plywood which BWR confirming to IS

710 of green or century make, designs & grooves as directed by

architectural drawings including two drawers size of 0.45 x 0.55 x

0.15 mt, two shutter size of 0.45 x 3.00 mt and 19mm thick

allproof plywood which BWR confirming to IS 710 of green or

century make self fixing at horizontal and vertical support and

lamination of 1.0 mm thick in single or double shade of green,

broom or equivalent make of plain or texture finish as directed on

all visible face including on teak wood batten patti and 0.80 mm

white lamination on all non visible faces & remaining faces.

Telescopic sliding channel made of Hettich or equivalent, S.S.

sliding rail made or equivalent, S.S. Decorative handle, S.S.stopper,

S.S.pipe, good quality lock with necessary fixtures & fasteners of

standard make as per detail drawing and image also including all

labours as approved by engineer-in-charge etc. complete.

2 The Contractor shall exhibit a board with detailed specification and details of work as directed

by the Engineer-In-Charge for which no extra payment shall be made.

3 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

4 GST and Income tax TDS will be deducted at a source while making payments of bills

5 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt.

G.R.: PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore

in R.C.C. items where there is a change as per actual mix design the cost of difference of

cement consumption have been deducted from the rate of original item at the rate of input

rate mentioned in all the tender.

6 GST will be paid extra as per Govt. amendment.

Deputy Executive Engineer

Signature of Bidder Valsad (R&B) Sub-Division

Executive Engineer

Valsad (R&B) Division,