Construction of HP.PWD Rest House under Jaisinghpur Sub Division

Amount

Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead and as per the direction of the Engineer-In-Charge . The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Dismantling wood work. Wrought framed and fixed in frames other frames and trusses of span upto 10 metres and height between ridge and floor level stacking the serviceable materials and disposal of un-serviceable materials with in 20 metres lead Sectional area average 40 sq.cm. Or over and as per the direction of the Engineer-In-Charge . The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Demolishing cement concrete manually/ by mechanical means Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix including disposal of material within 50 metres lead as per direction of Engineer - in - charge.The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government

Excavation in foundation and trenches in all heights and depths and in all kinds of soil including saturated soils comprising of pick work, jumper work, pick jumper work, blasting work both in soft and hard rock, chiseling / wedging out of rock (Where blasting is prohibited) or any other mixed variety of soil including shoring, strutting, de-watering and pumping or bailing out water (surface and sub soil water) up to any heights / depths or any quantum of water including slush which may arise during de-watering, removal of slush and stacking the serviceable and un-serviceable material clear from the edges of excavation and then returning the stacked soil in 15cm (fifteen centimeter) layers where required into plinth and side of foundation etcetera, consolidating each deposited layer by ramming & watering and then disposing of all surplus un-serviceable excavated earth as directed within all leads and lifts, by head-load, mechanical transportation or by any other mode of transportation with all cost of labours, machineries and disposed of material to be neatly dressed and leveled as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Stone filling with hard stone of approved quality dry hand packed tightly under floor. as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm (three point fifteen millimeter) thick welded with angle iron frame 30 X 30 X 5 mm (thirty into thirty into five millimeter) so as to give a fair finish including centering, shuttering, strutting and propping etcetera with wooden battens and ballies, in all heights of propping and centering below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Foundation, footings basis of columns etcetera and mass concrete as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm (three point fifteen millimeter) thick welded with angle iron frame 30 X 30 X 5 mm (thirty into thirty into five millimeter) so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies, in all heights of propping and centering below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Flat surfaces such as soffits of suspended floors, roofs, landings and the like floor etcetera upto any thickness as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm (three point fifteen millimeter) thick welded with angle iron frame 30 X 30 X 5 mm (thirty into thirty into five millimeter) so as to give a fair finish including centering, shuttering, strutting and propping etcetera with wooden battens and ballies, in all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Beams, cantilever, girders and lintels. Sides and soffits of beams, beam haunchings, cantilevers, bressumers and lintels upto all depth and in all heights from floor as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm (three point fifteen millimeter) thick welded with angle iron frame 30 X 30 X 5 mm (thirty into thirty into five millimeter) so as to give a fair finish including centering, shuttering, strutting and propping etcetera with wooden battens and ballies, in all heights of propping and centering below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Columns, pillars, posts and struts square rectangular or polygonal in plan as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated plain cement concrete 1:4:8 (one cement is to four sand is to eight graded crushed stone aggregate 40 mm (forty millimeter) nominal size) and curing complete excluding the cost of form work in foundation and plinth as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and laying mechanically mixed cement concrete 1:6:12 (one cement isto six sand isto twelve graded stone agreegate 40mm (forty millimetre) nominal size) and curing complete excluding cost of form work in foundation and plinth as per specification approved drawing , design, as per the entire satsifaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 (M-twenty) design mix to obtained the minimum compressive strength of 20N /mm2 (Twenty newton per square millimeter) with cement contents not less than 330 kgs (three hundred thirty kilogram) per cubic metre to give an even smooth surface mechanically mixed and vibrated including curing complete excluding cost of form work and reinforcement for reinforced concrete work in Foundation footings, bases of columns and the like and mass concrete as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and laying cement concrete work of gradProviding and laying cement concrete work of grade M-20 (M-twenty) design mix to obtained the minimum compressive strength of 20N /mm2 (Twenty newton per square millimeter) with cement contents not less than 330 kgs (three hundred thirty kilogram) per cubic metre to give an even smooth surface mechanically mixed and vibrated including curing complete excluding cost of form work and reinforcement for reinforced concrete work in Foundation footings, bases of columns and the like and mass concrete as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 (M- M-Twenty ) design mix to obtained the minimum compressive strength of 25N /mm2 (Twenty five Newton per square millimeter) with cement contents not less than 360 kgs (three hundred sixty kilogram) per cubic metre to give an even smooth surface mechanically mixed and vibrated including curing complete excluding cost of form work and reinforcement for reinforced concrete work in columns ,pillars, post, struts and the like and mass concrete up to all floor level, as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing Tor steel reinforcement of TATA / TISCO/SAIL for RCC work including bending, binding and placing in position complete up to all floor levels with cost of binding wire including carriage of material within all leads, lifts and other incidental and as per the direction of the Engineer-In-Charge .The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Random rubble masonry coursed with hard stones of approved quality in foundation and plinth including raking out joints in cement mortar 1:6 (one cement isto six sand) including levelling up with cement concrete 1:6:12 (one cement isto six sand isto twelve graded stone aggrigate 20 mm nominal size) upto plinth level as per specification approved drawing , design, as per the entire satsifaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Brick work with common burnt clay F.P.S. (Non Modular) bricks of class designation 7.50 in cement mortar 1:6 (one cement isto six sand) in foundation and plinth as per PWD specification. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and laying Damp Proof Course with 100mm (one hundred millimeters) thick cement concrete 1:2:4 (one cement: two sand: four graded crushed stone aggregate 12.5mm (Twelve decimal five millimeters nominal size) and curing complete, as required at site as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Applying a coat of hot bitumen (mexphalt 80/100 (Eighty/Hundred)/VG-10 using 1.70 Kgs. (one decimal seven zero Kilogram) per square metre On Damp Proof Course after cleaning the surface with a piece of cloth lightly soaked in kerosene oil complete as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing 35 mm thick flush door shutters interior grade, commercial type, core of black-board construction with frame of first class hard wood and well matched commercial ply veneering with vertical grains of cross bands and face veneers on both faces of shutters.including black enamelled M.S. butt hinges complete as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing wood work in frames of doors,windows,clerestory,windows and other frames wrought,framed and fixed in position 2nd class deodar wood and applying a coat of approved steel primer after pretreatment of the surface as directed by the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals . The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing steel glazed doors, windows and ventilators of standard rolled steel sections joints mitred and welded with 16 x3.15 mm (Sixteen into three decimal one five millimeter) iron lugs 10 cm (Ten centimetres) long embedded in cement - concrete blocks 15cm x 10cm x 10 cm (fifteen into ten into ten centimetres) size of 1:3:6 (one cement : three sand: 6 stone aggregate ) 20mm (twenty millimeter) nominal size or with wooden plugs and screws rawl plugs and screws or with fixing clips or bolts and nuts as required and iron fitting including providing and fixing of glass panes with glazing clips and special metal sash putty of approved make complete including applying a priming coat of red lead paints as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing 4.00 mm (four millimetre) thick glass panes glass panes with putty and glazing clips in steel doors, windows, clerestory windows ,all complete as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing M.S.( Mild Steel) plain grills of required pattern in window frames etcetera with M.S.Flats,20x5mm ( twenty into five millimeter) and 8 x 8 mm ( eight into eight millimeter) solid square or round bars, fixing to frames with round headed bolts and nuts or by screws or welding as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing aluminium oxidised Hydraulic door closer with necessary screws etcetera complete as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

White glazed tiles 6 mm (six milimetre) thick in skirting of IS quality 30x30cm (Thirty into Thirty centimetres) of NITCO/Somany tiles or its equivalent in risers of steps and dado 12 mm( twelve millimetre) thick cement mortar 1:3 (1 cement :3 sand) and jointed with cement slurry to all floor level as per specifications, approved drawing , design or as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and laying Duro stone vetrified tiles (300x300mmx10mm) in grey/coloured Nitco/ Kajaria/orient/bell/johnson or of approved shade in flooring, treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1 cement : 3 sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Kota stone slab flooring 20 mm(average) thick base of cement mortor 1:4 (1 cement :4 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab. including rubbing and polishing complete. as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing anodized aluminum sliding door bolt anodized transparent or dyed to required colour and shade with bolts nuts and screws etcetera complete 300 X 16 mm (three hundred into sixteen millimeter) size as per specifications, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing aluminium tower bolts (barrel type) anodized transparent or dyed to required shade and colour with screws etcetera complete as per specifications, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

200 X 10 mm (two hundred fifty into ten millimeter) size

150 X 10 mm (one hundred fifty into ten millimeter) size

Providing and fixing aluminum handles anodized transparent or dyed to required colour and shade with necessary screws etcetera complete as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

125 mm (one hundred twenty five millimeter) size

100 mm (one hundred millimeter) size

Providing and fixing aluminium anodized transparent or dyed to required shade and colour hooks and eyes with necessary screws etcetera complete 250 mm (two hundred fifty millimeter) size as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing 150mm (oneHundred fifty millimetre) diameter on wall face P.V.C. (D-plast) rain water pipes 2.2mm ( Two decimal Two millimeter) thick of supreme/Finolex/Prince/ Relpipe/Reliance having working pressure not less than 4/6 kgs /cm2 (Four /Six kilogram) per square centimeter including filling the joints with approved adhesive complete as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing on wall face P.V.C. accessories for rain water pipes 2.2mm ( Two decimal Two millimeter) thick of supreme/Finolex/Prince/ Relpipe/Reliance having working pressure not less than 4/6 kgs /cm2 (Four /Six kilogram) per square centimeter including filling the joints with approved adhesive complete as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

100mm Plain bend

100mm Shoe

Providing and fixing 100mm (One hundred milimetre) dia metre M. S. holder bat clamps of approved design to PVC pipes embedded in and including cement concrete block 10cmx10cmx10cm (Ten centimeter into Ten centimeter into Ten centimeter) of 1:2:4 (One cement is to Two Sand is to Four graded crushed stone aggregate 20mm (Twenty milimetre) nominal size and cost of cutting holes and making good the wall etc. as per specification approved drawing , design, as per the entire satsifaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Providing and fixing moulded hand rail of M.S. hollow pipe 50mm dia welded in straight lenght over M.S. flat at top of vertical balusters including one coat of red oxide priming coat complete (M.S. flat & balusters of railings shall be mesaured & paid separetely as per specification approved drawing , design, as per the entire satsifaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

6mm (Six millimeter) thick cement plasters in ceiling with cement mortar 1:3 (One cement: Three sand) for all heights as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

15 mm (Fifteen millimeter) thick cement plaster in single coat on rough side of brick/concretes/ stone walls for interior plastering up to all floor levels including arises, internal angles, chamfers and rounded angles not exceeding 80mm (Eighty millimeter) in girth and finished even and smooth with cement mortar 1:6 (One cement is to six sand) as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

15 mm (Fifteen millimeter) thick cement plaster in single coat on fair side of brick/concretes/ stone walls for interior plastering up to all floor levels including arises, internal angles, chamfers and rounded angles not exceeding 80mm (Eighty millimeter) in girth and finished even and smooth with cement mortar 1:6 (1 cement : 6 sand) as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing polythene aluminum polythene (P.E.) A.E P.E composite pressure pipe U.V. stabilized with carbon block confirming to I.S. 15450-2004 Flow guard/ Kitec for water supply including clamps at one metre spacing, cutting, fixing and making good the walls etcetera; but excluding the cost of fittings (Internal work) pipes exposed on wall including filling the joints with approved adhesive complete and entire carriage of material with in all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

1216 (16 mm O.D.) pipe

1620 (20 mm O.D.) pipe

Providing and fixingPE-AL-PE-Composite end seal compression fittings of Kitec as per IS:15450-2004 for cold water supply tees,elbows,reducers,connectors,couplers and clamps with jointing testing and fitting complete including cutting and making good the wall etcetera and entire carriage of material with in all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Equal tees (1216)

Equal Elbow (1216)

Equal Elbow (1620)

Female Elbow (1620x15 mm thread)

Male thread Connector 1216x15 mm thread

Male thread Connector 1620x15 mm thread

Female thread Connector 1216x15 mm thread

Making connection of glavanised mild steel distribution branch with galvanised mild steel main 20mm to 40mm nominal bore by providing and fixing tee including cutting and threading the pipe complete and entire carriage of material with in all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing in trenches P.V.C Supreme/ Kishan/Astral or equivalent pipe class "A" soil waste and ventilating pipe fixing with approved adhesive mixure complete 8/4 mm thick of Supreme and entire carriage of material with in all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

110mm nominal bore/diameter.

75mm nominal bore/diameter

Providing and fixing PVC clamps for PVC pipes fitting with steel screws and rawls plugs etctera complete. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

110mm nominal bore/diameters.

75mm nominal bore/diameters

Providing and fixing P.V.C accessories Supreme/ prince/ Finolex for Sewerage pipe conforming to IS No. 14735-99 P.V.C. Plain bend includingcarriage of material with in all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

110mm nominal bore/diameter.

75mm nominal bore/diameter

Providing and fixing P.V.C of Supreme/ prince/Finolex tees medium including fixing with approved adhesive etcetra complete The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

110mm nominal bore/diameters.

75mm nominal bore/diameters

Providing and fixing PVC heal rest Supreme/ prince/ Finolex including fitting the joints with approved adhesive mixure complete The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government..

110mm nominal bore/diameters.

75mm nominal bore/diameters

Providing and fixing P.V.C. coller of Supreme/prince/ Finolex including fixing with approved adhesive etcetra.complete The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

110mm nominal bore/diameter

75mm nominal bore/diameter

Providing and fixing P.V.C. cowl of Supreme/ prince/ Finolex including fixing with approved adhesive etcetra complete The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

110mm nominal bore/diameter

75mm nominal bore/diameter

Providing and fixing 100mm (One hundred millimeter) nominal size/diameter P.V.C. floor trap of Supreme/ prince/ Finolex ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floor etcetra complete including within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing European sheet No 20041 of Cera / Hindware / ESSESS/Jaguar vitreous china water closet (European type with integral P or S trap including jointing the trap with soil pipe in cement motar of approved adhesive (sheet cover and jet spray to be measured and paid for separately) as per approved specification and entire satisfaction of Engineer in charge. he rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixingP.V.C.10.00 litres PVC china low level flushing cistern of cera/Hindware/ESSESS/Jauuar with a pair of C.I or mild steel brackets, complete with fittings such as lead valve less syphon 15mm nominal size bras, ball valve with polythene float, C,P brass handle, unions and couplings for connections with inlet, outlet and over flow pipes 40mm dia C.P flush band including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet as per approved specification and entire satisfaction of Engineer in charge. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing 110mm size PVC 'P ' or ' S ' trap for water closet (squatting pan) including jointing the trap with the pan and soil pipe with adhesive The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing in position with clamp 32mm nominal internal diameter PVC flushof supreme/ESSESS/ Jindal / for low level flushing cistern includings connecting the flush pipe with cistern and cleset and making good the walls and floors. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing vitreous china pedestal of Cera / Hindware/jaguar for wash basin complete recessed at the back for the receiption of pipe and fittings. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing 32mm nominal size diameter rubber plug for wash basin (Heavy duty ). The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing 32mm diameters M.I. union for wash basin or sink Jal/Jaguar/ESSESS including necessary fittings. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing 32mm diameters P.V.C. waste pipe Supreme/finolex/prince waste pipe for wash basin or sink including brass check nut The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing 100mm diametres C.P. Grating of Jal/Jaguar /ESS-ESS (Heavy duty makes ISI marked ) for gully / floor or Nahni trap including fitting in all respect The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing flat back 600x450mm beveled edge mirror or superior glass of Atul/Modi Gaurd mounted on 6mm thick A.C. sheet or ply wood sheet and fixed to wooden plugs with C.P. brass screws and washers etcetra complete. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing C.P.(chromium plated) brass towel rail having size 600x20 mm of Jal/Jaguar ESSESS complete withC.P. brass brackets fixed to wooden plugs with C.P. brass screws etcetra complete. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing 600x120mm glass shelf (Heavy duty makes ISI marked IS No. 8931 & 8934) with C.P. brass brackets and guard rail complete fixed to wooden plugs with C.P. brass screws etcetra complete. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing C.P. Brass Toilet paper holder of Jal/Jaguar / Kingston/Pasko/Sieko (Heavy duty make ISI including fitting complete in all respect) The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing chromium plated jet pressure of Jal/Jaguar / ESSESS .The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing 15mm diameter chromium plate PTMT push cock tap of Jal/Jaguar / ESS ESS with necessary fittings including entire carriage of material with in all leads and lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing 15mm nominal bore fancy bib tap chromium plated ISI marked IS No. 8934 of Jal/Jaguar /ESSESS with necessary fittings including entire carriage of material with in all leads and lifts .The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing 15mm diameter C.P.(Chromium plated) brass stop cock of Jal/Jaguar / ESSESS with fitting complete. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing 15mm dia C.P. brass pillar tap with capstan head of Jal/Jaguar / ESS ESS with fitting complete in all respect .The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing brass full way valve with wheel of Jal/Jaguar/ESSESS with necessary fitting including entire carriage of material with in all leads and lifts and other incidentals.The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

15mm nominal bore

Providing and fixing 15mm nominal bore PVC connection pipe with brass union 45cm length, with necessary fittings. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing PVC water Storage tank (Sintex) tripple layer 1000 litres net capacity ISI marked with G.I. inlet and outlet connection, 15mm nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting upto any height above ground level including carriage of material with in all leads , lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and laying to level or slopes PVC pipe for sewerage line of diametre 150 mm overall pipe 8 mm thick of supreme/Finolex/Prince and jointing with approved adhesive complete .The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and laying cement concrete 1:5:10(One cement: five sand: ten graded crushed stone aggregate 40mm (Forty millimeters) nominal; size for bedding for 150 mm (one hundred fifty millimeter) diameter P.V.C. pipe including necessary form work and curing complete, as per specifications, approved drawing , design or as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Painting two coats (excluding priming coat) on new steel and other metal surfaces with enamel paint of Asian/ Nerolac brushing to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matters with enamel paint of approval shade as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil,grease,dirt and other foreign matters sand papering and knotting as required with ready mixed paint of Asian / Nerolac brushing wood pink primer as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Painting two coats(excluding priming coat) on new wood and wood based surface with ready mixed enamel paint of Asian / Nerolac brushing to give an even shade including cleaning the surface of dirt, dust and other foreign matters sand papering and Knotting with enamel paint other than white complete as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar dropping, dust, loose material and other foreign matters, sand papered smooth to give final matt finish to the surface complete. as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Painting on G.S. sheet with synthetic enamel paint ofacrylic/ synthetic /washable distemper of Asian/Nerolac of approved shade and manufacture of required colour to give an even shadeNew work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution complete The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Distempering (two coats) with acrylic/ synthetic /washable distemper of Asian/Nerolac of approved shade manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Finishing wall with water proofing cement paint of approved brand (Apex ultima of asian paint, Nerolac paint) of required shade on un-decorated wall surfaces(two coats) to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer- in-charge. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

ASHISH DOGRA