Himachal

Active

Works

Civil Works - Roads

Annual Surfacing on Ghanahatti Kalihatti Arki Road km .0/00 to 8/060

Public Works Department

Dhami | Shimla, Himachal Pradesh

Amount: ₹61.2 LCloses: 3 Oct 20266d left

Timeline

Published26 Sept 2026
Closes3 Oct 2026
Bid Opening5 Oct 2026

Tender Value

₹61.2 L

EMD Value

₹1.2 L

Closing Date

3 Oct 2026, 5:00 pm6d left

Tender Inviting Organisation

Name

Executive Engineer

Address

Shimla Rural Division Dhami

Work Description

Providing and Laying 25 mm thick Bituminous Concrete along with P/L of Hot applied thermo plastic compound 2.50 mm thick for edge line in between km. 0/00 to 3/00 and 7/00 to 8/030)Under AMP 2026-27 Addl. Km.

Tender Information

Tender ID

2026_PWD_144408_1

Reference Number

No.SRDD-CTR-2026-27-13775-810 Dt.25.09.2026

Tender Type

Open Tender

Product Category

Civil Works - Roads

Form of Contract

Percentage

Period of Work

15 days

Location

Dhami

Source Website

Subscribe to view

Eligibility / Pre-Qualification

AS PER SBD

Documents Required

12 documents required · 12 mandatory

Fee/PreQual/Technical

RequiredCost Of Tender/The Earnest Money (Indicated In Schedule F) (.pdf)

RequiredContractors Registration (Refer General Rules No 20) (.pdf)

RequiredGST (General Rules No 24.4), PAN No. as per General Rules 1.2B(a)(i) and E.P.F. (General Rules 22 A) (.pdf)

RequiredWork Done as Per General Rule 26.2.b (.pdf)

RequiredWork In Hand in accordance with General Rule 24.5 strictly as per schedule F (.pdf)

RequiredList Of Machinery, Tool, Plant(Refer Schedule F With Reference To Clause 18 of GCC (.pdf)

RequiredForm No 8 (Refer General Rules No.24.8) (.pdf)

RequiredList Of Both Gazetted And Non-Gazetted Hppwd Employees Related To Him (General Rule No 14) (.pdf)

RequiredAffidavit That Information Furnished With The Bid Is Correct In All Respect as General Rule No 1.2B (.pdf)

RequiredThe Bidder have to upload the proof of possessing the HMP and Paver etc. (Clause 18 of GCC) (.pdf)

RequiredBidders email Id, Address and Contact No. etc. (.pdf)

Finance

RequiredBOQ (.xls)

Fee & Financial Details

Tender Fee Amount

₹2,000

EMD Fee Amount

₹1.2 L

Important Dates

Last Activity

26 Sept 2026

Published

26 Sept 2026

Bid Opening

5 Oct 2026

Download Starts

26 Sept 2026

Download Ends

3 Oct 2026

Submission Starts

26 Sept 2026

Bill of Quantities

PercentageBoQ_Ver4.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (3 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1	Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg. per sqm. On the prepared bituminous surface cleaned with hydraulic broom as per Technical Specification Clause 503, including entire carriage of materials upto all leads and lifts and as per the direction of Engineer in Charge	13,685.6	Sqm	30	₹4,10,568
2	Providing and laying bituminous concrete 25 mm (Twenty five millimetre ) thick with 100-120 (one hundred –one hundred twenty ) TPH batch type hot mix plant producing an average output of 75 ( seventy five ) tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 to 5.6 ( five point four to five point six ) per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 509 (five hundred nine ) complete in all respects including carriage of material upto all leads and lifts as per the direction of Engineer in Charge.	342.14	Cum	15,920.2	₹54,46,937.23
3	Providing and Laying of Hot applied Thermoplastic compound 2.50 mm thick including relectorising glass @ 250 grams per square mtr area. Thickness of 2.50 mm is exclusive of surface applied glass beads as per IRC 35. The finished surface to be level uniform and free from streaks and holes including entire carriage of materials upto all leads and lifts throughj all modes of transportation as per the direction of Engineer in Charge	403	Sqm	646.49	₹2,60,535.47

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 1.52 MB

Work Item Documents

BOQ_214752.xls

BOQ • 0.37 MB

GhanahattiKalihattiAMP.pdf

Tender Documents • 7.23 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg. per sqm. On the prepared bituminous surface cleaned with hydraulic broom as per Technical Specification Clause 503, including entire carriage of materials upto all leads and lifts and as per the direction of Engineer in Charge

13,685.6

Sqm

₹4,10,568

Providing and laying bituminous concrete 25 mm (Twenty five millimetre ) thick with 100-120 (one hundred –one hundred twenty ) TPH batch type hot mix plant producing an average output of 75 ( seventy five ) tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 to 5.6 ( five point four to five point six ) per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 509 (five hundred nine ) complete in all respects including carriage of material upto all leads and lifts as per the direction of Engineer in Charge.

342.14

Cum

15,920.2

₹54,46,937.23

Providing and Laying of Hot applied Thermoplastic compound 2.50 mm thick including relectorising glass @ 250 grams per square mtr area. Thickness of 2.50 mm is exclusive of surface applied glass beads as per IRC 35. The finished surface to be level uniform and free from streaks and holes including entire carriage of materials upto all leads and lifts throughj all modes of transportation as per the direction of Engineer in Charge

403

Sqm

646.49

₹2,60,535.47