Modification Reorganization of Existing office accommodation at NHIDCL Headquarters at 1st Floor, Tower A, World Trade Centre Nauroji Nagar, New Delhi-110029

S NO DESCRIPTION BoQ Amount

1.00 CIVIL WORKS 4,859,348.77

2.00 SANITARY/ PLUMBING WORKS 828,262.60

3.00 ELECTRICAL WORKS 493,813.00

6.00 WI-FI & LAN WORKS Passive Component 175,500.00

8.00 LIGHTING 312,500.00

9.00 FURNITURE 0.00

10.00 TOTAL COST 8,867,363.00

Digitally signed by MANISH

SCHEDULE OF QUANTITIES-CIVIL

S NO DSR/ MR DESCRIPTION UNIT QUANTITY RATE AMOUNT

1 FLOORING WORKS

Providing & Fixing Herring Boon of ENGINEERED WOODEN FLOORING Panel 1820x145 Total

thickness 12-15 mm Numbers of panels per pack 6 Nested Lengths Max. 1 plank out of 6

m2 per pack 1,583 m2 Kg per pack 11,99 kg Toplayer PEFC controlled sources EN 13489 ±

3 mm Core board PEFC controlled sources Spruce Backing layer PEFC controlled sources

Wood Veneer 2 mm Tongue and groove Length Uniclic Width Uniclic Multifit Domestic

use Conditions in each pack 33 years Uniclic - Multifit connection Lifetime Commercial

On request "Wood for Life" Edge Protect + Provides a warranty on build-up of residue dirt

along the edges due to maintenance over the years 5 years "Wood for Life" Surface &

Edge Protect + (lacquered products only) Provides a warranty on pollution of surface

structure and a warranty on build-up residue dirt along the edges due to maintenance

over the years 10 years Surface layer Wood species Oak Origin Europe Finishing UV cured

Oiled finish 2 layers UV cured Lacquer Anti-scratch top coat 5 - 7 layers Natural variance

Due to nature, visual surface can deviate from samples Surface treatments cf

catalogue/website Nature Marquant Vibrant General aspect of installed EN 13489

Lipping - difference in height (mm) ≤ 0,20 difference in width (mm) ≤ 0,20 cupping

lengthwise % ≤ 0,1 cupping in width % ≤ 0,2 Dimensional stability ISO 24339 Cupping short

side max % ≤ 0,30 Changes 30 - 85 % RH Cupping short side min % ≥ - 0,20 Open joints

short side (mm) ≤ 0,20 Open joints long side (mm) ≤ 0,30 Underfloor heating Suitable of

special installation instructions.or its equivalent

Dismantling of Brics & Tiles Of floor, Dismantling the Wooden/Gypsum Partition Removing

the Workstation From Outside the Cabin & Removing the Debris & Surplus Material From

Outside the Building Premises etc. complete and stacking within 50 metres lead :

M.R Of area beyond 3 sq. metres L.S 1 50000 50000

Providing and laying vitrified floor and wall tiles in different sizes (thickness to be specified

by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622,

of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1

11.41A cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting

the joints with white cement and matching pigments etc., complete.

1 Digitally signed by MANISH

S NO DSR/ MR DESCRIPTION UNIT QUANTITY RATE AMOUNT

Size of Tile 600 x 1200 mm

Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of

0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin

11.48 per kg), including filling / grouting and finishing complete as per direction of Engineer-in-

Supply of 100 mm Aluminium (Grade 6063) Skirting with 15 micron anodising In Natural

Finish. Thickness 1.30 to 1.50mm. Designed to conceal screws. Seamless finish. Complete

with Rubber/ PVC Jointers and Gasket.

TOTAL FLOORING WORKS 767330.00

2 FALSE CEILING WORKS

2 Digitally signed by MANISH

S NO DSR/ MR DESCRIPTION UNIT QUANTITY RATE AMOUNT

Providing and fixing false ceiling at all height including providing and fixing of frame work

made of special sections, power pressed from M.S. sheets and galvanized with zinc

coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats

of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre

to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long

with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of

required length with nuts & bolts of required size and other end of angle hanger fixed with

intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to

centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered

flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed

in a direction perpendicular to G.I. intermediate channel with connecting clips made out

of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter

channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the

perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre,

2.01 12.45 with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to

ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm

at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square

edges of the board with recommended jointing compound , jointing tapes , finishing with

jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats

of primer suitable for board, all as per manufacturer's specification and also including the

cost of making openings for light fittings, grills, diffusers, cutouts made with frame of

perimeter channels suitably fixed, all complete as per drawings, specification and

direction of the Engineer in Charge but excluding the cost of painting with

12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011

12.45.1 (Board with BIS certification marks) Sqm 100.00 1145.95 114595.00

3 Digitally signed by MANISH

S NO DSR/ MR DESCRIPTION UNIT QUANTITY RATE AMOUNT

Providing & Fixing of Fibre Glass Acoustical Suspended Ceiling System with 20/25mm thick Microlook 90

Edge Tiles with Silhouette 15mm face exposed grid. The tiles shall have smooth laminated visual with

Humidity Resistance (RH) of 95%, NRC 0.85 – 0.95 (Average value of Absorption Co-efficient readings

taken at 250 Hz, 500 Hz, 1000 Hz and 2000 Hz) as per ASTM C423 standard, Light Reflectance ≥88% as

per ASTM E-1477, Colour Pebble White, Fire Performance of Class 0/1 as per BS 476 Part 6/7 with

20/25mm Square Tegular/Microlook 90˚ edge and 8mm drop in module size of 300 x 1200mm. It shall be

suitable for Green Building application, with Recycled content of 85%. SUSPENSION: The tile shall be laid

on grid system with 15mm white flanges incorporating a 6mm central reveal in white/black colour with mitred

ends & “bird’s mouth” notches to provide mitred cruciform junctions colour global white. Grid shall have

double stroke rotary stitching on all T sections i.e. the Main Runner, 1200mm & 600mm Cross Tees with a

web height of 38mm (all sections). The deflection loading of the system shall be 7.9 kg/m2 (as per standard

installation layout mentioned below) and main beam tested as per ASTM C635 (Deflection limit less than

L/360) with a deflection loading of 9.5 kg/m. The end details of the cross tee shall be made of pre-hardened

steel clip fixed to the ends of the cross tee to provide double locking between “cross tee to cross tee” and

“cross tee to main beam”. All main beam to main beam and cross tee to cross tee connection shall have a

pull out strength of more than 100kg. The T Sections shall be made of 90 gsm as per IS 277 (2003) pre-

painted steel with baked polyester paint of 0T bending capability.

INSTALLATION: To comprise main runner spaced at 1200mm securely fixed to the structural soffit using

suspension system (specifications below) at 1200mm maximum. The First/Last suspension system at the

end of each main runner shall not be greater than 450mm from the adjacent wall along with the first and the

last main beam shall be at less than 600mm from the wall. Flush fitting 1200mm long cross tees to be

interlocked between main runners at 1200mm to form 1200 x 1200 mm module. Cut cross tees longer than

600mm require independent support. 1200 x 300mm module to be formed by fitting 1200mm long flush fitting

cross tees (with no mitre cut on cross tees) centrally between the 1200 mm cross tees(Miter cut at every 300

mm). Perimeter trim to be wall angles of size 3000x19x19mm, secured to walls using screws at 450mm

centre to centre maximum. Installation shall be carried out as per Manufacturer recommended procedure.

SUSPENSION SYSTEM accessories supplied by Manufacturer consisting of M6 Anchor Fasteners with

hanger hole, pre- straightened hanger wire of dia – 2.5 mm of 1.80 m length having a tensile strength of 344-

413 MPa and a minimum loading strength of 110 kgs. (Optionally, adjustable hook clips made of 0.7mm

thick Grade 1 C55 galvanized spring steel of dimension 100 x 20mm and 4 mm aquiline wire to be used for

level adjustment during installation purpose in main runners).

TOTAL FALSE CEILING WORKS 512395.00

3 WALL FINISHES WORKS

4 Digitally signed by MANISH

S NO DSR/ MR DESCRIPTION UNIT QUANTITY RATE AMOUNT

Supply and installation of Aluminium Framed Glass Partition for Access and Cabin System

for minimal frame, room dividing solutions. Single glazed mullion free demountable glass

partition using Toughened/ Laminated glass in proprietary natural anodised/ Black

aluminium sections ALT 50 of size 50mmx30mm with Concealed sealing (No visible

Gaskets/ Seals) with acoustic rating of Minimum 32 db with third party test certificate. The

profile will have Carpert Groove at the bottom on both sides for accomodating max.

8mm carpets. The Glass to be fixed with help of proprietary stability GRIPPER Clamp to

have a stable system. It should consists of intermediate slim junction profiles for Glass to

3.01 MR Glass vertical joints, 90 Degree L Junction and T Junction profiles suitably to be used as Sqm 35.00 5401.00 189035.00

per room configuration designs. No VISIBLE Clip Lines to provide clutter free view at both

side of section. The Glass to be offset mounted towards outer edge leading to minimum

aluminium frame on one side. Optional Profile Bottom Seal pair for additional accoustic.

Glass thickness-10 (LSG) shall be included in the product.

Supply and installation of Aluminium Framed Glass Door with 12 mm thick toughned glass

forBlack aluminium sections ALT 50 of size 50mmx30mm with floor spring Door Handle

lock Top & Bottom Pivot

Providing wood work in frames of doors, windows, clerestory windows and other frames,

wrought framed and fixed in position with hold fast lugs or with dash fasteners of required

9.1 dia & length (hold fast lugs or dash fastener shall be paid for separately).

9.1.1 Second class teak wood cu m 0.25 131576.95 32894.24

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-

decorative type, core of block board construction with frame of 1st class hard wood and

9.21 well matched commercial 3 ply veneering with vertical grains or cross bands and face

3.04 veneers on both faces of shutters:

9.21.1 35mm thick including ISI marked Stainless Steel butt hinges with necessary screws Sqm 5.00 2015.75 10078.75

Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all

3.05 9.23 edges of flush door shutters (over all area of door shutter to be measured). Sqm 5.00 401.40 2007.00

Providing 40x5mm flat iron hold fast 400mm long including fixing to frame with 10mm

diameter bolts, nuts and wooden plugs and embedding in cement concrete block

3.09 9.53 300x100x150 mm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm Each 6.00 194.35 1166.10

5 Digitally signed by MANISH

S NO DSR/ MR DESCRIPTION UNIT QUANTITY RATE AMOUNT

Providing and Fixing top and Bottom Strap of approved make and model all complete

3.10 MR as per the direction of Engineer-in-charge. Each 2.00 1010.00 2020.00

Providing and Fixing Dead lock Back set- 50 mm with Key Hole of approved make and

3.11 MR model all complete as per the direction of Engineer-in-charge. Each 2.00 851.00 1702.00

Providing and Fixing 60 mm SS Cylinder One side knob and one side regular key (3 key)

for wooden doors of approved make and model all complete as per the direction of

Engineer-in-charge.

Providing & Fixing Frosted Translucent, cast PVC, self-adhesive vinyl, special CRYSTAL-

effect film to reproduce Sand-blasting effect on glass with customised designs, thickness

of 2 mil (0.05mm) without adhesive & 3mil (0.8)with adhesive having minimum tensile

strength of 3.5 pound/inch at 73 F(0.6 kg/cm at 23 C). Adhesion after 24hrs of installation

should be 4 pounds/inch (0.7 kg/cm) on Acrylic, Glass Polycarbonate: MCS warranty of

3.15 MR 3yrs (if exposed to direct sunlight) to 15yrs (indoors) must be endorsed by 3M India Limited Sqm 30.00 2467.00 74010.00

Architectural Market Department. Contractors payment wouldn't be released until &

unless he/she produces orginal warranty certificate from the manufacturer.

Providing and fixing Channelled woodwork acoustic wall panel of width of

192/132/128mm with finishing of 15 mm thick Grooved wooden acoustic panel of size

2420 mm, Groove Size 3.2mm at an interval of 21mm/28 mm c/c as per acoustic design /

Architects’ approval, the wooden acoustic panels to be backed with black acoustic

fleece with NRC of 0.45 (NRC 0.8 with 50mm GW of 48kg/m3).the edge of panel shall be

Tounge and groov to be fixed with clips on aluminium profile designed specially fo the

3.16 MR panel. the panel will be mounted with the help of clips on Bollard Aluminium extruded Sqm 50.00 3858.00 192900.00

Keel. The grooved acoustic panel laminated in desired shade as per Engineer In charge /

6 Digitally signed by MANISH

S NO DSR/ MR DESCRIPTION UNIT QUANTITY RATE AMOUNT

Providing and fixing of 6 mm thick premium GRIHA rated Lacquered glass of approved

color by Architect/ Client / Customer, fixed with compatible neutral grade silicon on a

perfectly levelled 12mm thick water proof marine plywood / MDF / Mineral fibre board

which is mounted on RCC wall/any other structure. Lacquered glass must be made

industrially (using curtain coating process); opaque (if viewed against a support wall),

uniformly coated with PU lacquer (50 micron thick coating or more); panel to panel

colour consistency (measured by photo spectrometer); highly durable (passes hardness

test for minimum 220 oscillations); humidity resistance (conforms to BS EN 1036 1999 or

equivalent) ; environmentally friendly having Low VOC (no lead, no arsenic, no copper,

no formaldehyde), low VOC content <100g/l. Silicone used should not react with lacquer

coating (compatible neutral cure silicon)

Providing and fixing partition upto ceiling height consisting of G.I. frame and required

board, including providing and fixing of frame work made of special section power

pressed/ roll form G.I. sheet with zinc coating of 120 gms/sqm(both side inclusive),

consisting of floor and ceiling channel 50mm wide having equal flanges of 32 mm and

0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre

with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or

metal screws with nylon plugs and the studs 48mm wide having one flange of 34 mm and

other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling

channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and

nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable

anchor fastener or metal screws with nylon plugs at spacing of 450mm centre to centre,

and fixing of boards to both side of frame work by 25mm long dry wall screws on studs,

9.105 floor and ceiling channels at the spacing of 300mm centre to centre. The boards are to

be fixed to the frame work with joints staggered to avoid through cracks, M.S. fixing

3.19 channel of 99mm width (0.9mm thick having two flanges of 9.5mm each) to be provided

at the horizontal joints of two boards, fixed to the studs using metal to metal flat head

screws, including jointing and finishing to a flush finish with recommended jointing

compound, jointing tape, angle beads at corners (25 mm x 25 mm x 0.5 mm), joint

finisher and two coats of primer suitable for board as per manufacturer's specification

and direction of engineer in charge all complete.

75mm overall thickness partition with 12.5mm thick double skin fire rated Glass Reinforced

Gypsum (GRG) plaster board conforming to IS: 2095: part 3 (Board with BIS certification

7 Digitally signed by MANISH

S NO DSR/ MR DESCRIPTION UNIT QUANTITY RATE AMOUNT

Providing & fixing of straight Paneling for walls & Columns structures anchored in floor slab

& celling, cladded with Acrylic Solid Surface 12mm thick sheets straight fabricated on a

single face, finished in matte finish, pasted with industrial grade silicon on a robust

substrate. Substrate shall be with suitable MS box sections [Appx. 15 to 20 kg/ Sqm] as per

structural requirement & duly painted with anti-rust red oxide coating and covered with

12 mm thick water proof ply as per the design and dimensions approved. The proposal

3.20 MR includes the cost of preparing appropriate substrate surface over the civil structure Sqm 5.00 13363.00 66815.00

provided, along with material cost & installation / fixing on straight walls etc. FOR ALL

WALL CLADDING, TABLE TOPS ETC. COMPLETE

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class

6.13 designation 7.5 in superstructure above plinth level up to floor V level.

6.13.2 Cement mortar 1:4 (1 cement :4 coarse sand) Sqm 20.00 1018.05 20361.00

Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course

3.26 6.15 of half brick masonry. Sqm 20.00 86.45 1729.00

13.4 12 mm cement plaster of mix :

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to

3.28 13.26 prepare the surface even and smooth complete. Sqm 100.00 214.30 21430.00

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an

13.60 even shade :

13.60.1 Two or more coats on new work Sqm 250.00 137.85 34462.50

Providing and fixing plain lining with necessary screws/nuts & bolts/ nails, including a coat

of approved primer on one face, and fixed on wooden /steel frame work, complete as

per direction of Engineer-in-Charge

12mm thick commercial ply conforming to IS : 1328 BWR type

Providing and fixing plain lining with necessary screws/nuts & bolts/ nails, including a coat

of approved primer on one face, and fixed on wooden /steel frame work, complete as

3.31 MR per direction of Engineer-in-Charge

8 Digitally signed by MANISH

S NO DSR/ MR DESCRIPTION UNIT QUANTITY RATE AMOUNT

4mm thick MDF Board Sqm 150.00 600.00 90000.00

Providing and fixing metal system up to ceiling height, which includes frame work made

of special section power pressed/ roll form G.I. sheet with zinc coating of 120 GSM,

consisting of Boral U track 52mm wide having equal flanges of 30mm and 0.55mm thick

(Base metal thickness) fastened to the floor slab and ceiling soffit using rawl plugs with

screw at 600mm centers, with first & last fixing point at not greater than 50 mm from either

end. Boral C studs 50mm wide having one flange of 34mm, other flange 36mm, lip size 6

3.32 MR mm and 0.55mm thick installed perpendicularly within the flanges of floor and ceiling Sqm 200.00 955.12 191024.68

channels located directly opposite to each other at not more than 610mm centers.

Maintain 5 to 10mm gap between C Stud and web of U Track.

Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss

/ matt/ suede finish with high density protective surface layer and reverse side of

3.33 9.127 adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of Sqm 150.00 890.55 133582.50

approved quality.

Providing and fixing thermal insulation with Resin Bonded Fibre glass wool conforming to

IS: 8183 having density 24 kg/m3, 50 mm thick, wrapped in 200G Virgin Polythene Bags

3.34 12.57 fixed to wall with screw, rawel plug & washers and held in position by criss crossing GI wire Sqm 150.00 307.35 46102.50

etc. complete as per directions of Engineer-in-Charge.

Providing & supplying of fabric venetian Window Blinds as per the approved sample, consisting of 3" vane

size having head rail, rotator rail and bottom rail made of aluminium alloy 6063-T6 PER ASTM B221 - 85

extruded profile, powder coated and provided in standard natural white color. The rolling tube should be

made up of aluminium alloy from extruded profile of 34mm dia. The head rail dimensions should be of

suitable size according to the length of head rail and space available and finished with fabric cover matching

with the louver fabric. The cassette should conceal the working mechanism rotary-clutch. (White

polycarbonate spring tempered rotary clutch which raises), lower and tilts the blinds. White polycarbonate

limit assemblies control vane over-rotation, located on either side of individual blinds. The room darkening

MR fabric of Blind should be of anti-static polyester vanes which have facings between two sheer layers (50 mm Sqm 40.00 17085.00 683400.00

wide) to reduce glare. Sheer layers should be of white 100% knit polyester, the colors, textures and opacities

as approved. The fabric shall be made of spun- bonded 100% polyester fiber (having green guard

certification) treated with soil & dust repellent requiring minimum regular interval cleaning. GREEN GUARD

Gold certified for low-emitting products to maintain Indoor environment. Up to 80% ultraviolet protection with

vanes open and 90% with vanes closed. The shading to be operated by Easy rise mechanism with a

continuous cord loop operating system. All parts, components & hardware are in approved shade as per

direction of Engineer-incharge.

9 Digitally signed by MANISH

S NO DSR/ MR DESCRIPTION UNIT QUANTITY RATE AMOUNT

STRETCHED FABRIC CEILING With Box Design 18 mm Board with Laminate Boxing design A per

Director Cabin: Supply & installationof fabric false ceiling / wall formed out with TRANSLUCENT Printed

fabric coverings made out of polyester knitted fabric coated with Polyurethane (PU). The TRANSLUCENT

Printed fabric width of 2m, 3m, 4.1m &5.1m with weight of 200gm/m2, thickness of 0, 3 mm. The

appearance of fabric is matt, smooth and uniform with blanq color and light transmission of 50%. The tear

strength of fabric should be accordance to CH: 4,5daN; TR: 6,5 daN. The fire rating should be accordance

to B-S1, d0. The fabric should be humidity resistant and free of carcinogenic substances(CMR) or volatile

organic Compounds (VOC’s). At labeling in accordance with the French decree no. 2011- 321, Oeko-Tex

standard100 certified. Fabric should be installed with approved manufacturer guidelines. It comes with 10-

year manufacturer guarantee. The installation of TRANSLUCENT Printed fabric should be dry installation &

MR done at room temperature using CLIPSO PVC, ABS Grippers. Clipso ceiling base to be made of MS or Sqm 50.00 11500.00 575000.00

Wooden frame finishing to a flush finish of tapered and square edges in desired design as per architect

specification.Supply of LED Lights behind the Fabric Wall/ False ceiling in modules/ PCB with recommended

wattage as per manufacturer's standards to give an effect of ambient lighting. LED spacing / Pitch should be

atleast 73 -80mm with beam angle of 170 degree, Colour temperature shoud be as per design intent

3000K/4000K/6000K. Wattage of 8-10W/mtr. LED modules/ PCB should be positioned properly to provide

an even light flow, casting noshadows or dark spots. LED Driver Cost included.

TOTAL WALL FINISHING WORKS 3579623.77

GRAND TOTAL 4859348.77

GRAND TOTAL 4859348.77

10 Digitally signed by MANISH

SCHEDULE OF QUANTITIES - SANITARY & PLUMBING WORKS

S NO QUANTIT TOTAL

NO DESCRIPTION UNIT RATE

2021 Y AMOUNT

Supply, Installation, Testing and Commisioning of SINGLE LEVER

MR 1 CONCEALED BASIN MIXER (WALL MOUNTED) WITH SPOUT EACH 2 16080.00 32160.00

(COMPOSITE ONE PIECE BODY)

Supply, Installation, Testing and Commisioning of TABLE TOP BASIN,

Supply, Installation, Testing and Commisioing of suitable compatible

WASTE COUPLING 32MM- FULL THREAD- WITH CERAMIC CAP-

*130MM HEIGHT *65MM CERAMIC CAP

Supply, Installation, Testing and Commisioing of BOTTLE TRAP

MR 4 (WITH INTERNAL PARTITION) 32mm SIZE WITH 300mm & 190mm EACH 2 3284.00 6568.00

LONG WALL CONNECTION PIPES & WALL FLANGE

Supply, Installation, Testing and Commisiong of RIMLESS, BLIND

INSTALLATION WALL HUNG WC WITH UF SOFT CLOSE SLIM

MR 5 SEAT COVER, HINGES AND ACCESSORIES EACH 2 15087.00 30174.00

SET, SIZE: 375X520X400 MM

Supply, Installation, Testing and Commisiong of PNEUMATIC

MR 6 CONTROL PLATE EACH 2 6641.00 13282.00

Supply, Installation, Testing and Commisiong of ANGULAR STOP

MR 7 COCK WITH WALL FLANGE EACH 2 4823.00 9646.00

Supply, Installation, Testing and Commisiong of CONCEALED STOP

MR 8 COCK WITH ADJUSTABLE WITH WALL FLANGE 15mm EACH 2 4965.00 9930.00

Supply, Installation, Testing and Commisiong of HAND SHOWER

(HEALTH FAUCET) WITH 8mm DIA 1.2 METER LONG FLEXIBLE

AND WALL HOOK ALD-CHR-573 or equivalent

Digitally signed by MANISH

S NO QUANTIT TOTAL

NO DESCRIPTION UNIT RATE

2021 Y AMOUNT

Supply, Installation, Testing and Commisiong of PNEUMATIC SINGLE

PIECE SLIM CONCEALED CISTERN BODY WITH INSTALLATION

MR 10 KIT & “S-TYPE” DRAIN PIPE CONNECTION SET FOR WALL HUNG EACH 2 8044.00 16088.00

WC (WITHOUT FLUSH CONTROL PLATE)

Providing and fixing P.V.C. waste pipe for sink or wash basin including

17.28 11 P.V.C. waste fittings complete.

17.28.2 Flexible pipe

Providing and fixing mirror of superior glass (of approved quality)

complete with 6 mm thick hard board ground fixed to wooden cleats

17.31 12 with C.P. brass screws and washers complete. EACH 2 1411.15 2822.30

Providing and fixing C.P. brass angle valve for basin mixer and gyser

18.53 13 points of approved quality conforming to IS : 8931

18.53.1 15 mm nominal bore EACH 8 500.35 4002.80

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply, including all CPVC

18.8 14 plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m

Concealed jointing

including & fittings

cutting chases with

andone step CPVC

making solvent

18.8.1 15mm nominal outer dia pipes METRE 50 441.15 22057.50

18.8.2 20mm nominal outer dia pipes METRE 50 513.75 25687.50

Providing and fixing C.P. brass long body bib cock of approved quality

18.51 15 conforming to IS standards and weighing not less than 690 gms.

15 mm nominal bore 708.40 1416.80

Digitally signed by MANISH

S NO QUANTIT TOTAL

NO DESCRIPTION UNIT RATE

2021 Y AMOUNT

Providing, fixing, jointing and testing in position of ISI marked UV

stabilized UPVC pipes for soil, waste, and vent, Type-B as per IS :

13592 suitable for rubber ring joints, including all neccessary specials

and fittings (confirming to IS:14735) i.e. bends, tees, junctions (with or

without doors), reducers, WC connectors, couplers, expansion joints /

bellows, cowels, clamps, rubber rings, clean outs etc. fixing at wall/

ceiling/ floor level supported by clamp & hangers etc. in concealed /

inside duct / under floor & basement ceiling / external work etc.

including chase cutting as required, excavation and back filling in all

kind of soils, suspended from floor under false ceiling or embedding

the pipes laid under floors / building in 75 mm. alround 1:2:4 cement

concrete (1 cement : 2 coarse sand : 4 graded stone aggregate 20

mm nominal size) including cost of shuttering for proper completion of

the work, breaking and making good the walls and floors etc. after

pipes have been duly laid and tested. The rubber ring shall confirm to

The Pipes will be supported with threaded G I rods & U clamps with

nuts, washers etc on 50x50x5 mm slotted angle. The cost will include

all support arrangements. The work includes commissioning of all

pipes lines as per drawings and specifications and as directed by engg-

in-charge at site.

a 110 mm dia (Wall Thickness - 3.2 to 3.8 mm) METRE 40.00 536.00 21440.00

b 75 mm dia (Wall Thickness - 3.2 to 3.8 mm) METRE 25.00 416.00 10400.00

Providing, fixing, jointing and testing in position ISI marked (IS:4985)

UPVC pipes of min 6 Kg/ Sqcm rating with fitting for waste pipe from

fixtures to floor trap including reduces, enlarger, socket, couplers,

MR 17 bends, tees etc including fixing at wall/ ceiling level supported by

clamp & hangers etc. cutting holes in wall/ floors/ slabs and making

good the same with cement concrete 1:2:4 complete as required.

Providing & fixing UPVC Floor trap of self cleansing design with

stainless steel grating complete in all respects.

Digitally signed by MANISH

S NO QUANTIT TOTAL

NO DESCRIPTION UNIT RATE

MR 18 Y AMOUNT

Plain Floor Trap (4" Ht) with 50 / 75 outlet and with height raiser

Extra for providing & fixing 125 mm dia C.P. grating in place of C.I.

MR 19 grating over floor traps. EACH 6 726.00 4356.00

Providing & fixing of SS Floor Cleanout, round or square with rubber

seal and flat round cover with screws and other required fitting

MR complete as required. EACH 6 1001.00 6006.00

Providing and fixing stainless steel tray below sewage pipe of size

200x200x200 mm of grade SS304 including all accessories

Supply, Installation, Testing and Commissioning of 15 litre geyser

Supply, Installation, Testing and Commisiong of SOAP DISH HOLDER

Supply, Installation, Testing and Commisiong of TUMBLER HOLDER

Supply, Installation, Testing and Commisiong of TOWEL RACK

MR 25 600MM LONG WITH LOWER HANGER EACH 2 15653.00 31306.00

Supply, Installation, Testing and Commisiong of ROBE HOOK

26 Supply, Installation, Testing and Commisiong of TOILET ROLL

MR HOLDER WITH COVER EACH 2 4978.00 9956.00

Supply, Installation, Testing and Commisiong of TOWEL HOLDER

Digitally signed by MANISH

S NO QUANTIT TOTAL

NO DESCRIPTION UNIT RATE

2021 Y AMOUNT

Supply, Installation, Testing and Commisiong of

MR 28 Bamboo Tap Tap SS Finished Chrome LEVER Nos 2 55000.00 110000.00

CONCEALED DIVERTOR

SITC of automatic wastewater pump suitable for

disposal of wash basin wastewater complete with

automatic float/level switch, control panel, non-return

valve, isolation valve, flexible connector, delivery pipe,

all necessary pipe fittings, electrical cabling, supports,

clamps, testing and commissioning, complete in all

respects. The pump shall have a minimum capacity of

50 LPM for wash basin with minimum head of 8–10 m,

suitable motor of 0.5 HP/1.0 HP, 230 V, single phase, 50

Hz, IP-68 protection, thermal overload protection and

non-clog/vortex type impeller capable of handling

solids suitable for sewage application. The quoted rate

shall be inclusive of all materials, accessories,

installation, testing and commissioning required for

satisfactory automatic operation of the system,

complete as directed by the Engineer-in-Charge.

Digitally signed by MANISH

S NO QUANTIT TOTAL

NO DESCRIPTION UNIT RATE

2021 Y AMOUNT

SITC of automatic sewage pump suitable for disposal

of sewage from WC, complete with automatic

float/level switch, control panel, non-return valve,

isolation valve, flexible connector, delivery pipe, all

necessary pipe fittings, electrical cabling, supports,

clamps, testing and commissioning, complete in all

respects. The pump shall have a minimum capacity of

150 LPM for WC sewage, with minimum head of 8–10

30 m, suitable motor of 0.5 HP/1.0 HP, 230 V, single phase, Nos 2 90000.00 180000.00

50 Hz, IP-68 protection, thermal overload protection

and non-clog/vortex type impeller capable of

handling solids suitable for sewage application. The

quoted rate shall be inclusive of all materials,

accessories, installation, testing and commissioning

required for satisfactory automatic operation of the

system, complete as directed by the Engineer-in-

TOTAL 828262.60

Digitally signed by MANISH

SCHEDULE OF QUANTITIES - ELECTRICAL WORKS

DSR NO DESCRIPTION

S NO UNIT QUANTITY RATE TOTAL AMOUNT

S NO UNIT QUANTITY RATE TOTAL AMOUNT

A POINT WIRING

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5

sq.mm FRLS PVC insulated copper conductor single core cable in

surface / recessed medium class PVC conduit, with modular switch,

1.10 modular plate, suitable GI box and earthing the point with 1.5 sq.mm.

FRLS PVC insulated copper conductor single core cable etc as

Wiring for group controlled (looped) light point/ fan point/call bell point

(without independent switch etc.) with 1.5 sq.mm FRLS PVC insulated

1.55 copper conductor single core cable in surface / recessed PVC conduit,

A.2 and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper

conductor single core cable etc as required.

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated

copper conductor single core cable in surface/ recessed medium class

A.3 1.12 PVC conduit alongwith 1 No 4 sq. mm FRLS PVC insulated copper Metre 500 334.00 167000.00

conductor single core cable for loop earthing as required.

Supplying and fixing following modular switch/ socket on the existing

1.24 modular plate & switch box including connections but excluding

modular plate etc. as required.

1.24.4 3 pin 5/6 amp socket outlet Each 50 122.00 6100.00

1.24.5 6 pin 15/16 amp socket outlet Each 50 197.00 9850.00

Supplying and fixing following size/module, GI box along with Modular

base & cover plate on existing modular metal boxes etc. as required.

Digitally signed by MANISH

DSR NO DESCRIPTION

S NO UNIT QUANTITY RATE TOTAL AMOUNT

S NO UNIT QUANTITY RATE TOTAL AMOUNT

B SUBMAIN AND CONTROL WIRING

Wiring for circuit/ submain wiring alongwith earth wire with the following

sizes of FR PVC insulated copper conductor, single core cable in

1.14 surface/ recessed medium class PVC conduit as required

1.14.2 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire Metre 350 275.00 96250.00

1.14.3 2 X 4 sq. mm + 1 X 4 sq. mm earth wire Metre 100 334.00 33400.00

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid

copper conductor PE insulated, shielded with fine tinned copper braid

E.11 1.19 and protected with PVC sheath in the exisitng surface/recessed steel/ Meter 500 47.00 23500.00

PVC conduit as required

Supplying and fixing of following sizes medium class PVC conduit aong

1.21 with accessories in surface/ recess including cutting the wall and

E.12 making good the same incase of recessed conduit as required

Total of Electrical items 493813.00

Digitally signed by MANISH

1.0 VRF/VRV OUTDOOR UNIT Unit Quantity Rate DSR Amount

2025 Amount (A)

Supply, Installation, Testing & Commissioning of Modular type Variable Refrigerant Flow/Variable

Refrigerant Volume air cooled Outdoor units suitable for cooling /heating having 100%

hermetically sealed inverter type twin Rotary/Scroll Compressor(s),minimum two compressors

(with individual separate PCB) for above 14HP modules, microprocessor based Controller, top

discharge type condensing unit(s), with R-410-A Refrigerant or equivalent, vibration Isolators with

suitable foundation etc. complete as required. To have better efficiency condenser fan shall be

capable to operate at different speed with respect to load. The unit shall deliver the rated

capacity and in confirmation as per IS 18728:2024 and CPWD Specifications and work even at

50°C ambient temperature without tripping. The system shall be able to deliver 100% of the rated

capacity upto 39 Degree Celcius.The unit shall be suitable to work on 400V +/- 10%, 3 Phase, 50Hz

AC power supply and BMS compatible. The unit shall be filled with first charge of the refrigerant

and ready for use as required. The condenser should be coated with a hydrophilic film to prevent

water accumulation on the surface of the heat exchanger, enhance water dispersion, and

reduce the risk of degradation, thereby improving overall performance and durability. The Indian

Seasonal Energy Efficiency Ratio (ISEER) of the unit shall be as per Energy Conservation and

Sustainable Building Code (ECSBC) 2024 as below and complete as per CPWD specification,

connections, inter connections etc. as required. (For capacity <40 kWr ISEER 7.4, Capacity > 40

and <70 ISEER 7.5, Capacity > 70 ISEER 7.6 for Super ECSBC Building)

2.0 INDOOR UNIT

Supply, Installation, Testing and Commissioning of following minimum capacity 4 way

Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre- filter,

fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with

DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary supports,

31.4 vibration Isolation, Corded remote control etc., suitable for operation on single phase 230 V ±

10%, 50Hz AC supply, complete, as required. The Indoor units must shut down upon receiving

a singal from the BMS System/Fire Signals. The system shall be capable to adjust air flow as per

room requirement in auto mode. The cooling capacity of indoor unit will be at air inlet conditions

of 27 Degree C DB and 19 Degree C WB temperature. (Make will be same as of Outdoor)

REFRIGERANT PIPING

Digitally signed by MANISH

Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of

following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system,

complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing

including accessories, insulated with XPLE Class-O tubular insulation/with Class-O closed cell

elastometric nitrile rubber tubular sleeves sections of 19 mm thick insulation as given below for

Suction and Liquid lines, all accessories as per specifications etc. as required :

3 31.14.1 6.4 mm dia (OD) (Softdrawn) with tube thickness 1.2 mm with 19 mm thick insulation Rmt 75.00 256.00 19,200.00

3.2 31.14.2 9.5 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm Rmt 75.00 346.00 25,950.00

3.3 31.14.3 12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm Rmt 90.00 487.00 43,830.00

3.4 31.14.4 15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm Rmt 90.00 615.00 55,350.00

3.5 31.14.5 19 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm Rmt 45.00 739.00 33,255.00

3.8 31.14.8 28.58 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm Rmt 20.00 1,157.00 23,140.00

3.10 31.14.10 34.9 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm Rmt 25.00 1,286.00 32,150.00

3.13 31.13.1 Indoor Units (y-joint) Each 18 4535 81,630.00

5 CONDENSATE DRAIN UPVC PIPE

Supply, installation, testing and commissioning of uPVC Pipe, complete with fittings, supports, U

trap arrangement, Clean Plug with 6mm nitrile insulation and accessories as per specifications,

Wiring for circuit/ submain wiring along with earth wire

with the following sizes of FRLS/HFFR PVC insulated

copper conductor, single core cable in surface/

recessed medium class PVC conduit as required.

Total Amount 1,889,975.00

Total Amount 1,889,975.00

Digitally signed by MANISH

SCHEDULE OF QUANTIITES: AV SYSTEM

S.No.Item Description Item Description Qty Unit Rate Non DSR Amount

SITC of 55" smart 4K LED Display,Native Resolution 3840 x 2160, Brightness

Minimum 390cd/m2, Inputs HDMI-3,USB(3.0)-3,USB-(2,0)-2,OPS Slot-1,RGB-1,

LAN-1,SPDIF-1 or Higher, Output Audio-1( Audio out to connect additional

Speakers if required) , Built in Touch type IR spread /P Cap/Incell/Inglass,

Touch Accuracy ±1.5mm or less, Operating System Support Windows

7/8/10/Windows XP/Linux/Mac/Android (Windows XP/Linux/Mac Support

one point touch) , Multi touch point Min 20 Points or Higher, White Board

55" main LED ,Writing, Pen, Palm Eraser ,Save, Screen Capture, Storage, Tool Bar, Air Class

display etc , Android 9.0 or better , Internal Memory (32GB),(Hisi 811, Dual core

A73+Dual core A53), DDR(4GB), Wi-Fi, Power Indicator, or higher, Screen

Share/Mira cast to Connect TAB/Mobile, Web Browser , 100-240V~, 50/60Hz,

20W(10W x 2) or higher , ISO9001, ISO14001,ISO45001,

The display should be a smart screen and touch enabled alongwith

stylus/pen. The display should also have provision for OPS PC.

SITC of Premium High Speed Gold plated HDMI Cable 15 ft HDMI Cable, Up

to 4K @ 60 Hz (4096x2160), UHD @ 60 Hz (3840x2160) 8 bit color depth, max.

18.0 Gbps data rate, Material: Tinned copper, 28 AWG and also to comply

the detailed technical specifications as attached

Digitally signed by MANISH

SCHEDULE OF QUANTITIES - LIGHTING WORKS

S NO DSR/MR Description Image Unit QTY Rate AMOUNT

Supply, Installation, Testing and Commissioing of Recessed downlightwith HPE (High-

Performance Efficiency) with LED (Light Emitting Diode), system power: 12 W,

Luminous flux of luminaire 1320 lm, 110 LM/W system efficacy, Colour temperature

of 4000 K, Neutral white, CRI > 80, 230V constant current driver, 70% of luminous

flux after 50,000 operating hours; energy-efficient LEDs, direct light emission,

housing in die-cast aluminium, Polyester powder white coloured coat applied over a 5-

2 MR stage pre-treatment trim, prismatic diffuser for homogenous light distribution, ZHLS no 50 1890.00 94500.00

(ZERO HALOGEN LOW SMOKE) wiring, Electronic control gear,

Protection class II, IP 40, Ø = 175 mm, DA(Ø) = 160 mm, H = 59 mm

Supply, Installation, Testing and Commissioing of Pendant/Recessed luminaire with

LED (Light Emitting Diode), system power 28 W, luminous flux of luminaire 3080 lm,

110 LM/W system efficacy, direct light emission CRI>80, colour temperature of

4000K, Neutral white, 230V constant current driver, 70% of luminous flux after 50,000

operating hours, energy efficient LEDs, luminaire profile in aluminium, Plastic

moulded end caps, Polyester powder Aluminium white coloured coat applied over a

5- stage pre-treatment, high efficiency glare-free snap fit micro-prismatic diffuser for

homogeneous light distribution, ZHLS (Zero Halogen Low Smoke) internal wiring,

integral Electronic control gear, adjustable suspender,

Protection class I, IP 20, L = 1199 mm, B = 75 mm, H = 90 mm, PL max = 1500 mm

Supply, Installation, Testing and Commisioning of Recessed luminaire with LED

(Light Emitting Diode), system power: 28 W, luminous flux of 2800 lm, colour

temperature of 4000 K, Neutral white, 230 V constant current driver, 70% of luminous

flux after 50,000 operating hours, energy-efficient LEDs, CRI > 80, CRI > 80,

THD<5%, P.F>0.95, SDCM 3, direct light emission, Luminaire housing in Aluminium

Extrution, polyester white powder coat applied over a 5-stage pre-treatment, Opal

MR diffuser for glare-free uniform light, integral electronic control gear, no 40 3450.00 138000.00

Protection class I, IP40,

TOTAL 312500.00

1 Digitally signed by MANISH

S.No. Item Description Unit Qty Rate Amount

Supply, Fixing & Laying of CAT 6 UTP cable 23 AWG

(DSR solid copper

1 1.53.1 conductors for Connectivity of Hub room to End Metre 1500 57.00 85,500.00

) Point.High Speed

Gigabit Ethernet U/UTP

Supply , Installtion , Testing and Comissioning of I/O

port for CAT6 cable

2 termination at Work Station end. Keystone Unshielded Nos. 50 450.00 22,500.00

Supply , Installtion , Testing and Comissioning of I/O

port for CAT6 cable

3 termination at Work Station end Redantant . Keystone Nos. 50 450.00 22,500.00

Unshielded Outlet,

180DG C6, Yellow

Supply , Installtion , Testing and Comissioning of I/O

port for CAT6 cable

4 termination at Rack Side. Keystone Unshielded Outlet, Nos. 50 450.00 22,500.00

Supply , Installtion , Testing and Comissioning of I/O

port for CAT6 cable

5 termination at Rack Side end Redantant . Keystone Nos. 50 450.00 22,500.00

Unshielded Outlet,

180DG C6, Yellow

Digitally signed by MANISH