Notice Inviting e-Tender No.05/EE(R and B)/NKDA/2026-27 ( SL No.03) Restoration of damaged portion of street no 911 and 830 along with Surfacing of those using Premix carpet and Seal Coat at AA-III in New Town under NKDA.

Bituminous Road

Dismantling of flexible pavements Dismantling of flexible pavements and disposal of dismantled materials up to a lead of 1000 metres, stacking serviceable and unserviceable materials separately (Reference to MoRT&H's specification clause 202). By Mechanical Means. Bituminous courses

Wet Mix Macadm Providing, laying, spreading and compacting graded stone aggregate conforming to the grading of table 40013 revised vide table 2 of IRC : 109 (2015) to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density .The thickness of a single compacted layer shall not be less than 75 mm.(Reference to MoRT&H's specification 406.

Prime Coat Providing and applying primer coat with cationic bitumen emulsion SS1 grade conforming to IS:8887 on prepared porous granular surface including clearing of road surface and spraying primer using mechanical means (Reference to MORT&H's specification clause 502).

Tack Coat Providing and applying tack coat with Cationic bitumen emulsion (MS) complying with IS:8887 using emulsion pressure distribution the prepared bituminous/granular/cement concrete pavement surface cleaned with mechanical broom and high pressure air jet (Reference to MORT&H's specification clause 503).( For Bituminous surface )

Providing and laying Bituminoas Macadam using Mobile hot Mix Plant (Light Duty) and using aggregates of Grading-2 of Table-33 premixed with 75kg of bitumen per cum, transported to site laid over a reviously prepared surface at specified laying temperature to the required grade, level and alignment per spefeation to achierve the desired compatio meluding cost and cariage of stone materials ane btumen, hire charges of machinery and equipment. cos of fuel and lubricants and wages of operatiomal saff.lqualty conitrol complete as per diretion of Engineer in charge.

Seal Coat Type B Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using. Type B seal coats (Reference to MORT&H's specification clause 511).

Premix Surface Open - Graded Premix Surfacing, Providing, laying and rolling of open-gradedpremix surfacingof 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using viscosity grade bitumen of approved grade to required line, grade and level toserve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a smoothwheeled tandem or other approved type roller 8-10 tonne capacity, finished to required level and grades(Reference to MORT&H's specification clause 510).

Add @ GST 18 % ( Seial No. 02 to 08)