GE/SMB/T-57/2023-24 REPAIR TO BRICK WORK PLASTERING FLOORING PLUMBING AND SANITARY FITTINGS AND CONNECTED BR ITEMS OF CERTAIN BLDGS IN ZONE I AT MIL STN SAMBA

Amount

Brick work with sub class 'B' burnt old size bricks straight or curved on plan exc. 6 m mean radius bult in CM 1:6 including demolition of old brick works any type and removing u/s material from the work site to outside defence land, complete all as specified and as directed.

Brick work with sub class 'B' burnt old size bricks straight or curved on plan exc. 6 m mean radius bult in CM 1:6 but except bricks,including demolition of old brick works any type and removing u/s material from the work site to outside defence land, complete all as specified and as directed.

PCC 1:2:4 type B-1 (using 20 mm graded stone crushed aggregate) as in coping, bed blocks, junction of parapet wall, fixing of truss etc including preparation of surface and fair without using extra cement and formwork included the quoted rate,complete all as specified and directed.

Rendering 15mm thick in CM 1:4 on fair/unfair faces of brick work or concrete surfaces finished fair & even without using extra cement , complete all as specified and as directed by Engineer-in-charge.

15 mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:6 and finished even and fair without using extra cement, , complete all as specified and as directed by Engineer-in-charge.

Rendering 15mm thick in CM 1:4 on fair/unfair faces of brick work or concrete surfaces finished fair & even without using extra cement including taking down old cement plaster on any surface include raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and as directed by Engineer-in-charge.

15 mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:6 and finished even and fair without using extra cement, including taking down old cement plaster on any surface include raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and as directed by Engineer-in-charge.

Preparation of new plastered surfaces of walls & applying two coats of oil bound distemper including smoothing of plastered surface by applying wall care putty and one coat of primer complete all as specified.

Two coats of cement based paints including preparation to newly plastered surfaces of walls etc completed all as specified.

Preparation of old plastered surfaces of walls & applying two coats of oil bound distemper including smoothing of plastered surface by applying wall care putty and one coat of primer complete all as specified.

Two coats of cement based paints including preparation to old plastered surfaces of walls etc completed all as specified.

Non - skid / Anti skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including 15 mm thick screed bed in CM 1:4. Including Dismantling floor, hearth or wall tiling including cement mortar bedding, terrazo dado from wall surface (but not backing), removing serviceable tiles to store and rubbish off the premises. Complete all as specied and directed.

Description all as item No 12 above but as in vertical surfaces dado/skirting over and including a backing coat of CM 1:4, 10 mm thickIncluding Dismantling floor, hearth or wall tiling including cement mortar bedding, terrazo dado from wall surface (but not backing), removing serviceable tiles to store and rubbish off the premises. Complete all as specied and directed.

Glazed ceramic coloured tiles in vertical surface 300x450x7 mm thick, set and jointed in neat cement slurry and pointed white or colored cement to match the surface over and including 10 mm thick CM 1:4 all as specified. Including Dismantling floor, hearth or wall tiling including cement mortar bedding, terrazo dado from wall surface (but not backing), removing serviceable tiles to store and rubbish off the premises. Complete all as specied and directed.

5 mm thick rendering on fair faces of brick work or concrete surfaces ceilings in CM 1:3 and finished even and fair without using extra cement, including taking down old cement plaster on any surface include raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and as directed by Engineer-in-charge.

Rotational moulded polye- thylene water storage tanks of capacity 500 ltrs (cylindrical vertical with closed top) three layered hoisted and fixed in position including all necessary connections all as specified in SSR Part I & including dismentling old U/S tank, complete all as specified and as directed.

Rotational moulded polye- thylene water storage tanks of capacity 1000 ltrs (cylindrical vertical with closed top) three layerd hoisted and fixed in position including all necessary connections all as specified in SSR Part I & incl dismentling old U/S tank,complete all as specified and as directed.

20mm bore ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed in repair,complete all as specified and as directed. (minimum weight 210 gm)

Nipple suitable for HDPE water tank, minimum weight 45gms for 20 mm bore pie, including making connections, complete all as specified and directed.

20 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floor including all necessary fittings to join CPVC to GI pipes, FTA, MTA, Bends, Tee etc, including taking down/out old GI pipe with fittings,complete all as specified and directed. Note- Rates are inclusive of Brass T, Brass Elbow for sanitary / plumbing fittings where ever required as per site.

25 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floor including all necessary fittings to join CPVC to GI pipes, FTA, MTA, Bends, Tee etc, including taking down/out old GI pipe with fittings,complete all as specified and directed. Note- Rates are inclusive of Brass T, Brass Elbow for sanitary / plumbing fittings where ever required as per site.

15mm bore CP Bib taps, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed in repair, complete all as specified and directed.

15mm bore Bib taps standard of PTMT any colour high pressure screwed for iron pipe and fixed in repairs, minimum weight 90 gms, complete all as specified and directed.

15mm bore angle stop valve standard of PTMT any colour high pressure screwed for iron pipe and fixed in repairs, minimum weight 90 gms, complete all as specified and directed.

15mm bore angle valve with wall flange , cast copper alloy, chromium plated fancy type screwed for 15 mm iron pipe, fixed in repair,complete all as specified. Make:- Jainko,Essco, Parko.

15mm bore stop valve, cast copper alloy ,screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repair, complete all as specified and directed.

15mm bore pillar taps standard of PTMT any colour high pressure screwed for iron pipe and fixed in repairs, minimum weight 110 gms, complete all as specified and directed.

PVC connection 15 mm x 450 mm including brass check nut at both ends screwed for iron pipe of 15 mm bore.complete all as specified and directed.

Brass chromium plated shower rose with or without swivel joints, 125mm size, including fixing to steel pipe or union, fixed in repair, complete all as specified and directed.

RCC M-15, Nomial mix, Type B-1 1:2:4 using 20 mm graded crushed stone aggregate as in slabs supported on wall, beams and columns in floors, landings, balconies, canopies, deck slabs and in shelves and the like, including demolition of reinforced cement concrete of any discription on 1st to 2nd floors and removing the rubbish from the work site to out side defence premises, complete all as specified and directed.

Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, chajjjas, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) incl fair finished surface complete all as specified and directed.

Note:- The contract sum arrived after deduction of amount of Sch of credit as listed in tender Documents.

THAKUR BUILDERS AND CO

M/S VIJ CONSTRUCTION CO

M/s Sahib and Company

M/S RAJESH SHARMA & CO.

M/S BAWA TRADING CO