Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.4 LAccepted-AOC | L1 | Accepted-AOC Contractor being L1 | |
| 2 | L2₹32.8 L+₹1.3 L (4.14%)Rejected-Finance | L2 | Rejected-Finance Rejected contractor being L2. | |
| 3 | L3₹35.7 L+₹4.2 L (13.3%)Rejected-Finance JOGINDER NAGAR | AMRITSAR | PUNJAB | 143001 | L3 | Rejected-Finance Rejected Contractor Being L3. | |
| 4 | Not Admitted-Fee/PreQual/Technical | - | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification |
Tender Value
₹35.7 L
EMD Value
₹71,310
Closing Date
9 Mar 2023, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
EXECUTIVE ENGINEER JAL SHAKTI DIVISION GHUMARWIN
EXECUTIVE ENGINEER JAL SHAKTI DIVISION GHUMARWIN DISTRICT BILASPUR HIMACHAL PRADESH PINCODE 174021
SH Construction of over head storage tank 150000 Ltr Capacity of 20 mtrs staging height at Village Panol Under LWSS Panol Amarpur
2023_HPIPH_70249_1
GMR-BLP02-737(15256-95 Panol Amarpur Overhead)
Open Tender
Civil Works
Item Rate
365 days
PANOUL
Please refer Tender documents.
6 documents required · 6 mandatory
₹400
Yes
EXECUTIVE ENGINEER JAL SHAKTI DIVISION GHUAMRWIN
₹71,310
Yes
7 Nov 2023
4 Mar 2023
10 Mar 2023
4 Mar 2023
9 Mar 2023
4 Mar 2023
4 Mar 2023 - 9 Mar 2023
Amount
Excavation infoundation and trenches etc.(including pipes and pits upto all depths) in all kinds of soil such as pick work, jumper work, blasting and chiselling soft or hard rock where blasting is prohibited in all leads and lifts including trimming and dressing of sides, levelling of bed to correct grade stacking the excavated soil clear from the edge of excavation and returning the excavated soil after laying, jointing and testing of GI pipes in trenches in 15cm layers including consolidating each deposited layers by ramming and watering and then disposing of all surplus excavated soil as directed in all leads and lifts and soring strutting and trimming and dressing where ever required including restoration of un-metalled/metalled/paved surface to its original condition including cost of diversion for traffic night signals fixing caution board, crossing over trenches for access to houses and fencing etc. complete in all respect.
Providing and laying cement concrete 1:3:6 (1cement : 3 sand: 6 graded crushed stone aggregate and 40mm nominal size) and curing complete excluding the cost of form work in foundation and plinth in all leads and lifts.
Providing and laying cement concrete 1:1:5:3 (1cement: 5 sand: 3graded stone aggregate 40mm nominal size) and curing complete excluding the cost of form work in foundatioin and plinth in all leads and lifts.
Foundation footing bases of columns and the like mass concrete.
Walls any thickness but not less than 0.1 mtrs. thickness attached pillasters , plinths and string courses etc.from top of foundation level upto floor two level including all leads and lifts .
Floor two level to floor three level
Floor two level to floor three level
Floor three level to floor four level
Column ,pillars ,posts & struts upto floor two level
Floor two level to floor three level
Floor two level to floor four level
Floor three level to floor five level
Lintels, beams gorders bressumers & cantileversupto floor level.
Floor two level to floor three level
Floor three level to floor five level
Arches upto floor two level.
Floor two level to floor three level
Floor three level to floor four level
Suspended floor ,roofs,landings etc upto floor two level.
Floor two level to floor three level
Floor three level to floor four level
Providing form work with steel plates 3.15mm thick welded with angles iron in frame 30x30x5mm so as to give a fair finish including certring shuttering strutting and propping etc. with wooden battens and ballies height of propping and centring below supporting floor to ceiling not exceeding 4 mtrs and removal of the same for in-situ reinforced concrete & plain concrete work in all leads and lifts in:-
foundation,footing,bases of columns etc and mass concrete.
Flat surfaces such as soffits and suspended floors roofs landing and like floors etc. up to 200 mm in thickness
Vertical surface such as walls(any thickness) partitions and the like including attached pillasters buttresses, plinth and string courses and the like.
upto 4.00 mtrs for vertical surface of tank
columns ,pillars posts & struts.
Beyond 4.00mtrs
Beams ,cantilever,girders & lintels.sides & soffits of beams ,beam haunchings ,catilevers ,bressumers & lintels not exceeding 1.00 mtr depth in all from door.
Providing form work of oridinary timber plankings so as to give a rough finish including centring, shuttering, strutting & propping etc. height of propping & centring below supporting floors to ceiling not exceeding 4metres & removal of the same for insitu reinforced concrtete work & plain concrete work in:- Arches beyond 6.00 metres span.
Beyond to 6.00mtr height
Providing mild steel/tor steel reinforcement for RCC work including bending, binding and placing in position complete upto floor two level.
Providing RCC work smooth finishing of the exposed surface with cement mortar 1:3(1 cement : 3 sand) with in all leads and lifts.
Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on un-decorated walls surfaces (two coats to give an even shade after throughly finishsing the surface to remove all dirt and remains of loose powdered materials.
Providing & Fixing of Man hole cover (size 680X680) with M.S sheet 2.00 mm thick with hinges on MS. angle iron frame 32x32x3mm supporting with 25x5mm MS flat with base frame 40x40x5mm duly welded and fixed in RCC slab with anchor bolt 12mmx125mm i/c cost of welding charges,carriage fixing and applying priming coat and locking arrangement complete in all respect as per entired satisfiction of engineer in charge.
laying of 80mm GMS pipe confirming to following tables as per IS 6392-1971 (latest with upto date amendments)and welding of MS flanges with GI/ pipes M.C in requisite layers on both faces to make the joint leak proof. The welding of flanges should conform to IS 816-1969 with electrodes as per IS 814-1991 and required nos of nuts and bolts conforming to IS 1364 .The thickness of gasket sheet not less than 3.00 mm conforming to IS 2712-1998 .The work shall be done as per entire satisfaction of Engineer in charge within all leads and lifts.80mm
Steel work welded in built up section, trusses and framed work including hoisting fixing in position and applying a priming coat of red lead paint in grauting framed guard bars, ladders, railing bracket similar work.
Laying ,jointing and testing in trenches galvanised mild steel tube fittings of light grade screwed and socketted complete with tube fittings such as bends,tees,air valves, etc. of following dia complete as per direction and to the entire satisfaction of Engineer-in charge.(25mm)
Providing & fixing CI Sluice valve (with hand wheel) as per IS : 780-1984 class-I upto 300 mm dia.(i/c brass spindle & as per 2906-1984 class-II for dia.> 300 mm) uired shall be measured & paid for separatly)nuts,rubber insertion etc.,(the tail piece if req-complete with bolts. 80mm
Providing, & Fixing of GI bends of 80mm of required degree made from parent containing to relevant ISI code fully flanged with MS table -5 as per IS 6392-1971 (latest with upto date amendments) with plain end GMS pipe in requsite number of layers on both faes to make the joint leak proof (The cost of providing and laying of GI pipes pipes to be measured and paid for separately). The welding of flanges should conform to IS 816-1969 with electrodes as per IS 814-1991 and required number of nuts and bolts conforming to IS: 1364 including cost of gasket sheet nuts and bolts. The thickness of gasket sheet not less than 3.00mm conforming to IS 2712-1998. The work shall be done as per to the entire satisfaction of Engineer in charge i/c carriage within all leads and lifts. (80mm)
Providing plinth protection 50mm thick in cement concrete 1:3:6 1 cement :3 sand : 6 graded crushed stone aggregate 20mm nominal size ) including finishing of the top surface of concrete smooth in all leads & lifts.
Providing under layers for plinth protection 75mm thick (unconslidated) bed dry brick /stone aggregate 40mm nominal size well rammed & grouted with fine sand i/c preparation of ground complete in all respect within all leads & lifts.
Constructing chamber for sluice valve with 600x600 CI surface box 100mm top dia ,160mm bottom dia & 180mm deep (inside ) with chained lid RCC top 1:2:4 mix(1 cement) :2 sand :4 graded stone aggregate 20mm nominal size 100mm thick foundation Conc:1:5:10 mix (1 cement :5 sand :10 graded stone aggregate 40mm niminal size & inside plastering with cement mortor 1:3 (1 cement :3 sand) finished with a floating coat of neat cement i/c curing complete 600x600x750mm inside size with 150mm thick walls of RCC :2: (1 cement 2 sand 4 graded stone aggregate 20mm nominal size complte with form work & reinforcement with 6mm bars at not exceeding 150mm centres both ways.
Providing and fixing of below items required for OHSR complete
Lightening conductor
Water measurement gauge
Vent pipe i/c CI cowl complete
Flanged bell mouth a/w puddle collars
Expansion joints
Structural design and drawing
Soil testing report for bearing capacity of soil
Ambika Bhawani Constructions
BITTU RAM
stage.html
html • 0.05 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .