TOKEN NO. GE/K-67/2024-25 - PERIODICAL SERVICES AND MISC B/R REPAIR/ REPLACEMENT WORKS IN VARIOUS UNITS AT KAKSAR, CHHANIGUND, HARDAS AND APATI UNDER GE KARGIL

Amount

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M&L rendering 15mm thick cement plaster in cement mortar (1:4) finished even & fair without using extra cement on brick/concrete surfaces.

M&L rendering 15mm thick cement plaster in cement mortar (1:6) finished even & smooth without using extra cement on brick/concrete surfaces.

M&L for two coats of oil bound distemper on newly plastered surfaces of walls including preparation of surfaces.

M&L for two coats of cement based paint on newly plastered surfaces of walls including preparation of surfaces.

M&L for preparation of old plastered or unplastered surfaces of walls and applying one coat of cement base paint , complete all as specified and directed.

M&L for preparation of old plastered or unplastered surfaces of walls and applying two coats of cement base paint , complete all as specified and directed.

M&L for preparation of old surfaces (plastered or unplastered) of walls including cornices, pilasters etc including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying two coat of white wash on wall, complete, all as specified & as directed.

M&L for preparation of old surfaces (plastered or unplastered) of walls including cornices, pilasters etc including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying two coat of white wash on ceiling, complete, all as specified & directed.

M&L for preparation of old painted wooden based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel Paint, complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old painted steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint, complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old painted steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint, complete all as specified and directed by Engr-in-Charge.

M&L for preparation of existing old surface of chequered tile, interlocking tile etc and applying two coats of floor guard paint of specified tint using Roller/Brush complete all as specified and directed.

Dismantling of floor hearth and wall tiling including cement mortar bedding (but not backing) and removing serviceable like to store and rubbish off the premises, complete all as specified and directed by Engr-in-Charge.

M&L Non-skid coloured tiles, 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match over 15 mm thick screed bed or beddding layer of CM 1:4, complete all as specified and directed by Engr-in-Charge.

M&L Vitrified coloured/light tiles 600x600x10mm thick as in floors set and jointed in neat cement slurry and pointed in coloured cement to match over 15 mm thick screed bed or beddding layer of CM 1:4, topping layer finished even and rough.

M&L for Glazed ceramic coloured tiles of size 450x300x7 mm thick on vertical surface such as in dado/skirting/risers to steps etc set and jointed in neat cement slurry and pointed in white cement with pigment to match the shade of tiles laid over and including 10 mm thick rendering in CM (1:4), complete all as specified and directed by Engr-in-Charge.

Supply & fixing in repair one piece EWC with soft closing seat cover and fittings complete, 710 x 370 x 745 mm, modern curvy design with flushing efficiency 3.90/2.10 LPF complete, the shade of EWC to be approved by Engr in Charge, complete all as specified and directed.

Supply & fixing stainless steel squatting pan of pattern “long pan”, size 580 x 440 mm standard ivory with ‘P’ or ‘S” trap, front or back inlet and foot rests, any pattern (excluding flushing cistern and flush pipe).

Supply & fixing in repairs vitreous china wash basin white ,flat,flate back size 630x450 mm excluding taps,waste pipe,chain and plug and procelain stopper but including brackets complete all as specified and directed.

Supply & fixing in repairs 32mm dia PVC waste pipe for WHB, urinals etc complete all as specified and directed.

Supply & fixing in repair Pillar taps cast coper alloy,with capstan head 15mm bore screwd down high pressure with or without lettred 'hot' or 'cold' with long screwed shanks and fly nuts,screwed for iron pipe chromium plated fancy type.

Supply & fixing in repairs 15 mm dia bib tap standard of PTMT of any colour high pressure screwed for iron pipe and fixed complete all as specified and directed.

Supply & fixing in repair PVC connections 15 mm size with PTMT nuts of length 450 mm, complete all as specified and directed by Engr-in-Charge.

Supply & fixing in repair grating doom 125mm dia with or without hole.

Note : Deduction for amount of Rs. 3,710.00 as listed in Schedule 'A' Part-II (Schedule of Credit) shall be made while awarding of contract.

M/S MOHD FAROOQ (BID ID -3242214)

M/S JOHN VASSELLY (BID ID -3236929)

M/S BALI CONSTRUCTIONS (BID ID -3242449)

GAGAN ASSOCIATES (BID ID -3241722)

M/s Pall Constructions (BID ID -3242708)

M/S MOHD KHAN (BID ID -3242285)

MEDHI ALI GRONGPA (BID ID -3242906)

M/S LIAQAT ALI KHAN (BID ID -3242476)