Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹19.2 Cr
EMD Value
₹19.2 L
Closing Date
30 Aug 2024, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
NBCC Bhawan
NBCC Bhawan
Construction of International Guest House, Community Centre, Cafeteria, Dispensary, balance Horticulture and Landscaping work, External Development for college of Veterinary and Animal Science and college of Fisheries at RLBCAU at Datia.
NBCC/SBGDelhill/Datia/GuestHouse/2024/75Dated16082024~EWec576d60f427742135d0b107
NBCC/SBGDelhill/Datia/GuestHouse/2024/75Dated16082024
Open Tender-Domestic
Civil Works - Others
NBCC Bhawan
₹11,800
₹19.2 L
30 Aug 2024
16 Aug 2024
30 Aug 2024
16 Aug 2024
30 Aug 2024
GENERAL ABSTRACT OF COST
COST AS PER DSR 2023 AS PER MARKET RATE
S.NO. DESCRIPTION (RS.) (RS.) Total
INTERNATIONAL GUEST HOUSE
CANTEEN AND ACTIVITY HALL
Electrical works for International
Guest House, Canteen, Market
Complex and Dispensary
EXTERNAL DEVELOPMENT WORKS
Digitally signed by ARTI
NBCC INDIA LIMITED
NAME OF THE PROJECT: CONSTRUCTION OF PROPOSED NEW BUILDING BLOCKS (INTERNATIONAL GUEST
HOUSE, CANTEEN COMPLEX, MARKET AND BANK BUILDING, DISPENSARY AND EXTERNAL DEVELOPMENT
WORKS FOR RLBCAU, DATIA.
GENERAL ABSTRACT OF COST
DESCRIPTION COST AS PER DSR AS PER MARKET
2023 (RS.) RATE (RS.)
INTERNATIONAL GUEST HOUSE
1.0 CIVIL WORK MAIN BUILDING 552,45,015.69 20,94,769.80
2.0 INTERNAL PLUMBING WORKS
2.1 SANITARY FIXTURE 4,61,663.40 12,03,945.02
2.2 SOIL ,WASTE & VENT PIPES AND FITTINGS 9,52,237.83 76,910.52
2.4 RAIN WATER PIPING WORK 68,375.60 0.00
2.5 SEWERAGE & DRAINAGE 10,03,201.20 0.00
3.0 FIRE FIGHTING
3.1 SUB HEAD - A : PUMPS & EQUIPMENTS 1,30,457.34 0.00
SUB HEAD - B : PIPING HYDRANT & ACCESSORIES
DESCRIPTION COST AS PER DSR AS PER MARKET
2023 (RS.) RATE (RS.)
CANTEEN AND ACTIVITY HALL
1.0 CIVIL WORK MAIN BUILDING 452,08,422.74 0.00
2.0 INTERNAL PLUMBING WORKS
2.1 SANITARY FIXTURE 3,18,866.20 2,12,212.48
2.2 SOIL ,WASTE & VENT PIPES AND FITTINGS 3,24,682.24 20,270.13
2.4 RAIN WATER PIPING WORK 50,007.07 0.00
2.5 SEWERAGE & DRAINAGE 5,32,437.10 0.00
3.0 FIRE FIGHTING
3.1 SUB HEAD - A : PUMPS & EQUIPMENTS 1,11,058.50 0.00
SUB HEAD - B : PIPING HYDRANT & ACCESSORIES
Digitally signed by ARTI
DESCRIPTION COST AS PER DSR AS PER MARKET
2023 (RS.) RATE (RS.)
1.0 CIVIL WORK MAIN BUILDING 121,94,635.55 0.00
2.0 INTERNAL PLUMBING WORKS
2.1 SANITARY FIXTURE 87,528.35 64,693.35
2.2 SOIL ,WASTE & VENT PIPES AND FITTINGS 59,363.29 3,912.39
2.4 RAIN WATER PIPING WORK 17,924.40 0.00
2.5 SEWERAGE & DRAINAGE 2,73,697.55 0.00
3.0 FIRE FIGHTING
3.1 FIRE EXTINGUISHERS 0.00 1,17,794.28
DESCRIPTION COST AS PER DSR AS PER MARKET
2023 (RS.) RATE (RS.)
1.0 CIVIL WORK MAIN BUILDING 67,55,071.19 0.00
2.0 INTERNAL PLUMBING WORKS
2.1 SANITARY FIXTURE 83,089.50 66,770.50
2.2 SOIL ,WASTE & VENT PIPES AND FITTINGS 46,822.64 3,912.39
2.4 RAIN WATER PIPING WORK 17,924.40 0.00
2.5 SEWERAGE & DRAINAGE 2,97,856.70 0.00
3.0 FIRE FIGHTING
3.1 FIRE EXTINGUISHERS 0.00 67,646.56
Digitally signed by ARTI
DESCRIPTION COST AS PER DSR AS PER MARKET
2022 (RS.) RATE (RS.)
Electrical works for International Guest House, Canteen,
Market Complex and Dispensary
1.0 SUB HEAD-I:CIRCUIT CUM POINT WRING. 39,51,893.42 0.00
2.0 SUB HEAD-II - FITTINGS & FIXTURES. 5,81,948.34 22,79,184.00
3.0 SUB HEAD-III - DISTRIBUTION BOARDS. 5,86,233.44 0.00
SUB HEAD-IV - CABLE TRAYS , RACEWAY , JUNCTION
5.0 SUB HEAD-V - EARTHING. 5,44,781.76 0.00
7.0 SUB HEAD-VII: UPS SYSTEM. 0.00 10,01,821.00
8.0 SUB HEAD-VIII:- LT PANEL. 0.00 36,92,530.00
9.0 SUB HEAD-IX: SPLIT AC SYSTEM . 0.00 100,99,539.00
SUB HEAD-X:FIRE ALARM & DETECTION SYSTEM & PA
SUB HEAD-XI: I T ( ACTIVE & PASSIVE NETWORKING.).
12.0 SUB HEAD-XII:LIFT. 0.00 18,65,253.00
DESCRIPTION COST AS PER DSR AS PER MARKET
2023 (RS.) RATE (RS.)
EXTERNAL DEVELOPMENT WORKS
6.0 RAINWATER HARVESTING WORKS 9,30,615.86 0.00
7.0 GREASE SEPARATOR 10,86,338.04 0.00
Digitally signed by ARTI
NBCC (INDIA) LTD
NAME OF THE PROJECT: CONSTRUCTION OF PROPOSED NEW BUILDING BLOCKS (INTERNATIONAL GUEST HOUSE, CANTEEN COMPLEX,
MARKET AND BANK BUILDING, DISPENSARY AND EXTERNAL DEVELOPMENT WORKS FOR RLBCAU, DATIA.
ESTIMATE - INTERNATIONAL GUEST HOUSE (CIVIL ITEMS)
DSR 2023 DESCRIPTION Unit Qty Rounded Rate DSR Amount
1.0 CARRIAGE OF MATERIAL
1.1 By Mechanical Transport including loading,unloading and stacking
1.1.2 Carriage of earth
1.1.4 Carriage of excavated rock
2.6 Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over
areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including
getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by
Engineer-in-charge.
2.6.1 All kinds of soil cum 551.52 177.50 97,894.80
Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in
foundation over areas (exceeding 30cm in depth , 1.5 m in width or 10 sqm on plan),
2.7 including disposal of excavated earth, for all leads and lifts, disposed earth to be levelled
and neatly dressed.
2.8 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in
foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including
dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the
excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
2.25 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations
etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming cum 572.57 196.00 1,12,223.72
and watering, lead up to 50 m and lift upto 1.5 m.
Digitally signed by ARTI
DSR 2023 DESCRIPTION Unit Qty Rounded Rate DSR Amount
2.25(a) Excavating, supplying, stacking and filling of local earth (including royalty) by mechanical
transport upto a lead of 5km also including ramming and watering of the earth in layers not
exceeding 20 cm in foundation trenches, plinth, sides of foundation etc. complete for all
2.26 Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or
stacked materials.
2.26.1 All kinds of soil cum 13.83 126.80 1,753.64
2.26.2 Ordinary or hard rock cum 3.46 227.40 786.80
2.27 Supplying and filling in plinth with sand under floors, including watering, ramming,
consolidating and dressing complete.
2.34 Supplying chemical emulsion in sealed containers including delivery as specified.
2.34.1 Chlorpyriphos/Lindane Emulsifiable concentrate of 20%. Ltr. 103.04 234.75 24,188.64
2.35 Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite
2.35.2 Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25
litres per linear metre including drilling and plugging holes etc.: With Chlorpyriphos/ metre 170.91 53.45 9,135.14
Lindane E.C. 20% with 1% concentration
4.1 Providing and laying in position cement concrete of specified grade excluding the cost of
centering and shuttering - All work up to plinth level
4.1.8 1:4:8 (1 Cement : 4 coarse sand (zone-lll) derived from natural sources : 8 graded stone
aggregate 40 mm nominal size derived from natural sources)
4.3 Centering and shuttering including strutting, propping etc. and removal of form for all
4.3.1 Foundations, footings, bases of columns sqm 124.42 392.15 48,791.30
4.17 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand :
6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast
40 mm nominal size, well rammed and consolidated and grouted with fine sand, including Sqm 104.16 749.30 78,047.09
necessary excavation, levelling & dressing & finishing the top smooth.
5.1.2 Reinforced cement concrete work in beams, suspended floors, roofs having slope up to
15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and
spiral stair cases above plinth level up to floor five level, including the cost of centering, cum 29.18 9,045.75 2,63,954.99
shuttering, finishing and excluding reinforcement with 1:1.5:3 (1 cement: 1.5 coarse sand:
3 graded stone aggregate 20 mm nominal size).
Digitally signed by ARTI
DSR 2023 DESCRIPTION Unit Qty Rounded Rate DSR Amount
5.9 Centering and shuttering including strutting, propping etc. and removal of form for all
5.9.1 Foundations, footings, bases of columns etc. for mass concrete. sqm 248.64 392.15 97,504.18
5.9.2 Walls (any thickness) including attached pilasters, butteresses, plinth and string courses
5.9.3 Suspended floors, roofs, landings, balconies and access platform. sqm 1825.60 927.25 16,92,787.60
5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers. Sqm 1705.76 736.40 12,56,121.66
5.9.6 Columns, Pillars, Piers, Abutments, posts and Struts Sqm 795.20 961.30 7,64,425.76
5.9.7 Stairs, (excluding landings) except spiral-staircases. Sqm 62.98 764.95 48,176.55
5.9.16 Edges of slabs and breaks in floors and walls.
5.9.19 Weather shade, chajjas, corbels etc. including edges. sqm 66.86 951.10 63,590.55
5.22 Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position
and binding all complete upto plinth level
5.22.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. kg 27680.08 107.85 29,85,296.63
5.22 A Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in
position and binding all complete above plinth level.
5.22A.6 Thermo-Mechanically Treated bars of grade Fe-500 D or more. kg 59302.17 107.85 63,95,739.03
5.33 Providing and laying in position ready mixed or site batched design mix cement concrete
for reinforced cement concrete work; using coarse aggregate and fine aggregate derived
from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement,
admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of
concrete, to improve durability and workability without impairing strength; including
pumping of concrete to site of laying, curing, carriage
for all leads; but excluding the cost of centering, shuttering, finishing and
reinforcement as per direction of the engineer-in-charge, for the following grades of
Note: Extra cement up to 10% of the minimum specified cement content in design mix
shall be payable separately. In case the cement content in design mix is more than 110%
of the specified minimum cement content, the contractor shall have discretion to either re-
design the mix or bear the cost of extra cement.
5.33.1 All works upto plinth level
5.33.1.1 Concrete of M25 grade with minimum cement content of 330 kg /cum cum 212.80 9,504.75 20,22,610.80
5.33.1.2 Concrete of M30 grade with minimum cement content of 350 kg /cum cum 30.73 9,655.70 2,96,719.66
5.33.2 All works above plinth level upto floor V level
5.33.2.1 Concrete of M25 grade with minimum cement content of 330 kg /cum cum 422.82 9,860.40 41,69,174.33
Digitally signed by ARTI
DSR 2023 DESCRIPTION Unit Qty Rounded Rate DSR Amount
5.33.2.2 Concrete of M30 grade with minimum cement content of 350 kg /cum cum 67.20 10,011.35 6,72,762.72
5.30 Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.
5.35 Add for using extra cement in the items of design mix over and above the specified
cement content therein.
6.1 Brick work with common burnt clay F.P.S. (non modular) bricks of class
designation 7.5 in foundation and plinth in:
6.1.2 Cement mortar 1:6 (1 cement : 6 coarse sand) cum 31.96 7,132.25 2,27,946.71
6.4 Brick work with common burnt clay F.P.S. (non modular) bricks of class
designation 7.5 in superstructure above plinth level up to floor V level in
all shapes and sizes in:
6.4.2 Cement mortar 1:6 (1 cement: 6 coarse sand) cum 72.80 9,105.95 6,62,913.16
6.44 Brick edging 7cm wide 11.4 cm deep to plinth protection with common burnt clay F.P.S.
(non modular) bricks of class designation 7.5 including grouting with cement mortar 1:4 (1 Mtr 342.72 59.45 20,374.70
cement : 4 fine sand).
6.38 Providing and laying Autoclaved Aerated concrete(AAC) blocks masonry 100 mm/ 125
mm thick with Grade-1 AAC blocks of density 551 to 650 kg/cum conforming to 1S:2185
(Part 3) in super structure above plinth level up to floor V level in cement mortar 1:4 (1
cement : 4 coarse sand ). The rate includes providing and placing in position 2 Nos 6 mm
dia M.S. bars at every third course of masonry work.
6.47 Providing and laying Autoclaved Aerated concrete(AAC) blocks masonry with 150 mm to
300 mm thick with Grade-1 AAC blocks of density 551 to 650 kg/cum conforming to
IS:2185 (Part 3) in super structure above plinth level up to floor V level with RCC band at
sill level and lintel level with approved block laying polymer modified adhesive mortar all cum 276.39 8,333.65 23,03,337.52
complete as per direction of Engineer-in-Charge. (The payment of RCC band and
reinforcement shall be made for seperately).
Digitally signed by ARTI
DSR 2023 DESCRIPTION Unit Qty Rounded Rate DSR Amount
8.2 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and
prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and
similar locations of required size, approved shade, colour and texture laid over 20 mm
thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement,
mixed with matching pigment, epoxy touch ups, including rubbing, curing,
moulding and polishing of edges to give high gloss finish etc. complete at all levels.
8.2.2 Granite stone slab of colour black, Cherry/Ruby red
8.5 Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen
platform, vanity counter and similar location in marble/ Granite/ stone work, including
necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges
8.31 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness
to be specified by the manufacturer), of approved make, in all colours, shades except
burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting,
risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 sqm 97.44 1,267.95 1,23,549.05
coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in
white cement mixed with pigment of matching shade complete.
Digitally signed by ARTI
DSR 2023 DESCRIPTION Unit Qty Rounded Rate DSR Amount
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid
door/window/clerestory windows & desertory other Frames/Chowkhat
comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium
carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic
additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after
applying PVC solvent cement and screwed with full body threaded star headed SS screws
having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N
(Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of
26.86 elasticity 900 N/mm2 and resistance to spread of flame of Class A category with -
property of being termite/borer proof, water/moisture proof and fire retardant and
fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length
complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners
shall be paid for separately).
Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth
and width of profile shall be acceptable. Variation in profile dimensions on plus side shall
be acceptable but no extra payment on this account shall be made.
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid
plain flush door shutter of required size comprising of virgin polymer of K value 58-60
(Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice
husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms)
having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N
(Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity
26.87 850 N/mm2 and resistance to spread of flame of Class A category with property of
being termite/borer proof, water/moisture proof and fire retardant and fixing with
stainless steel butt hinges of required size with necessary full body threaded star
headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note:
stainless steel butt hinges and necessary S.S screws shall be paid separately)
Digitally signed by ARTI
DSR 2023 DESCRIPTION Unit Qty Rounded Rate DSR Amount
Providing and fixing bright finished brass tower bolts (barrel type) with
necessary screws etc. complete :
Providing and fixing chromium plated brass handles with necessary
screws etc. complete:
Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy
weight) with stainless steel screws etc. complete :
Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc.
complete : (copper oxidized as per IS: 1378)
Providing and fixing bright finished brass hanging type floor doo stopper with necessary
screws, etc. complete.
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of
approved quality) complete with 6 mm thick hard board ground fixed to wooden
cleats with C.P. brass screws and washers complete.
9.1 Providing wood work in frames of doors, windows, clerestory windows
and other frames, wrought framed and fixed in position with hold fast lugs
or with dash fasteners of required dia & length (hold fast lugs or dash
fastener shall be paid for separately).
9.1.1 Second class teak wood cum 4.02 1,42,949.70 5,74,657.79
9.12 Extra for providing frosted glass panes 4 mm thick instead of ordinary float glass panes 4
mm thick in doors, windows and clerestory window shutters. (Area of opening for glass sqm 19.76 176.40 3,485.66
panes excluding portion inside rebate shall be measured).
9.21 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part |!) non-
decorative type, core of block board construction with frame of 1st class hard wood and
well matched commercial 3 ply veneering with vertical grains or cross bands and face -
veneers on both
faces of shutters:
9.21.1 35 mm thick including ISI marked Stainless Steel butt hinges
with necessary screws
Digitally signed by ARTI
DSR 2023 DESCRIPTION Unit Qty Rounded Rate DSR Amount
9.23 Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all
edges of flush door shutters (over all area of door shutter to be measured). sqm 141.52 462.35 65,431.77
9.26 Extra for cutting rebate in flush door shutters (Total area of the shutter to be measured).
9.53 Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm
diameter bolts, nuts and wooden plugs and embedding in cement concrete block
30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm
9.74 Providing and fixing bright finished brass tower bolts (barrel type) with
necessary screws etc. complete :
9.82 Providing and fixing bright finished brass hanging type floor door stopper with necessary
screws, etc. complete.
9.84 Providing and fixing aluminium extruded section body tubular type universal hydraulic door
closer (having brand logo with ISI, IS: 3564, embossed on the body, door weight upto 36
Kg. to 80 Kg. and door width from 701 mm to 1000 mm), with double speed adjustment
with necessary accessories and screws etc. complete.
9.88 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers
and a pair of lever handles of approved quality with necessary screws etc. complete. Each 69.00 998.35 68,886.15
9.89 Providing and fixing chromium plated brass night latch of approved quality including
necessary screws etc. complete.
9.92 Providing and fixing chromium plated brass handles with necessary screws etc. complete:
9.117 Providing and fixing factory made uPVC door frame made of uPVC
extruded sections having an overall dimension as below (tolerance
+1mm), with wall thickness 2.0 mm (+ 0.2 mm), corners of the door
frame to be Jointed with galvanized brackets and stainless steel screws,
joints mitred and Plastic welded. The hinge side vertical of the frames
reinforced by galvanized M.S. tube of size 19 X 19 mm and 1 mm (+ 0.1
mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame
complete as per manufacturer’s specification and direction of Engineerin-
9.117.2 Extruded section profile size 42x50 mm metre 12.77 331.35 4,231.34
Digitally signed by ARTI
DSR 2023 DESCRIPTION Unit Qty Rounded Rate DSR Amount
9.118 Providing and fixing to existing door frames.
9.118.2 30 mm thick factory made Polyvinyl Chloride (PVC) door shutter made of styles and rails
of a uPVC hollow section of size 60x30 mm and wall thickness 2 mm (+ 0.2 mm), with
inbuilt decorative moulding edging on one side. The styles and rails mitred and joint at the
corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall
thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by
inserting galvanised M.S. tube of size 25x20 mm and 1 mm (+ 0.1 mm) wall thickness.
The lock rail made up of ‘H’ section, a uPVC hollow section
of size 100x30 mm and 2 mm (+ 0.2 mm) wall thickness fixed to the shutter styles by sqm 7.06 3,253.80 22,971.83
means of plastic/ galvanised M.S. ‘U’ cleats. The shutter frame filled with a uPVC
multichambered single panel of size not less than 620 mm, having over all thickness of 20
mm and 1 mm (+ 0.1 mm) wall thickness . The panels filled vertically and tie bar at two
places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and
washers, complete as per manufacturer’s specification and direction of Engineer-incharge.
9.121 Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of
cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to
receive shutter of 30 mm thickness. The laminate shall be moulded with
fire resistant grade unsaturated polyester resin and chopped mat. Door metre 6.17 570.95 3,522.76
frame laminate shall be 2 mm thick and shall be filled with suitable wooden
block in all the three legs. The frame shall be covered with fiber glass from
all sides. M.S. stay shall be provided at the bottom to steady the frame.
9.122 Providing and fixing to existing door frames.
9.122.2 30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and
wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm
thick FRP laminate all around, with suitable wooden blocks inside at required places for
fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used
as filler material throughout the hollow panel, casted monolithically with testing parameters sqm 2.88 4,488.95 12,928.18
of F.R.P. laminate conforming to table - 3 of IS: 14856, complete as per
direction of Engineer-in-charge.
Digitally signed by ARTI
DSR 2023 DESCRIPTION Unit Qty Rounded Rate DSR Amount
9.127 Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss /
matt / suede finish with high density protective surface layer and reverse side of adhesive
bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved
9.139 Providing and fixing panic bar / latch (Double point) fitted with a single body, Trim Latch &
Lock on back side of the Panic Latch of reputed brand and manufacture to be approved by each 4.00 8,366.15 33,464.60
the Engineer- in- charge, all complete.
9.147A Providing and fixing factory made uPVC glazed/wire mesh windows/ doors comprising of
lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required)
extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles
and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour
and design duly reinforced with galvanized mild steel section
made of required shape & size as per CPWD Specification, uPVC extruded glazing beads,
interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM
gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head,
comprising of matching polyamide PA6 grade sleeve for fixing frame
to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic
caps and necessary stainless steel screws etc. Profile of frame, sash &
mullion (if required) shall be mitred cut and fusion welded/mechanically
jointed duly sealed at all corners, including drilling of holes for fixing
hardware and drainage of water etc. After fixing frame the gap between
frame and adjacent finished wall shall be filled with weather proof silicon
sealant over backer rod of approved size and quality, all complete as
per approved drawing conforming to CPWD specification & direction of
Engineer-in-Charge. Section of steel reinforcement and cross sections
of uPVC profiles to be as per design approved by Engineer-in-Charge.
Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit
with / without high performance coatings as per design requirements and
conforming to IS: 3548 & IS: 16231 shall be paid separately.
Note:- Structural design proof checked from a Government
Engineering Institute, to be provided by the manufacturer for :
(i) Sites with basic wind speed > 45 m/sec as per IS 875 — Part 3
(ii) Sites with structure height more than 20m for all wind speeds
Digitally signed by ARTI
DSR 2023 DESCRIPTION Unit Qty Rounded Rate DSR Amount
9.147.A4 Three track three panels sliding window with two glazed & one wire mesh panels with
Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body.
9.147.A4.1 Using R2 series with frame (70 mm & above) x (40 mm & above) & both glazed and fly
screen sash (25 mm & above) x (50 mm & above) with zinc alloy (Zamak) powder coated sqm 129.02 10,993.55 14,18,387.82
touch locks with hook. (Height upto 1.2 metre).
9.149 Providing and fixing casement handle made of zinc alloyed (white powder coated) for
uPVC casement window with necessary screws etc. complete.
9.153 Providing and fixing steel (white power coated) crescent lock for uPVC
sliding window/ door with necessary screws etc. complete.
9.161 Providing and fixing fire resistant door frame of section 50 x 60 mm on horizontal side &
35 x 60 mm on vertical sides having built in rebate made out of 1.6 mm thick GI sheet (
Zinc coating not less than 120gm/ sqm) suitable for mounting 120 minutes Fire Rated
Glazed Door Shutters. The frame shall be filled with mineral wool Insulation having density
minimum 96Kg/cum. The frame will have a provision of G.I. anchor FAstners 14 nos ( 5
each on vertical style & 4 on horizontal style of size M10 x 80 ) suitable for fixing in the meter 19.15 2,202.90 42,185.54
opening along with factory made template for SS ball bearing hinges of Size 100x89x3mm
for fixing of fire rated glazed shutter . The frame shall be finished with a approved fire
resistant primer or powder coating of not less than 30 micron in desired shade as per the
directions of Engineer - in- Charge . (Cost of SS ball bearing hinges is excluded).
9.162 Providing and fixing 60 mm thick glazed fire resistant door shutters of 120 minutes fire
rating confirming to IS:3614 (Part II) or EN1634-1:1999, tested and certified as per
laboratory approved by Engineer-in-Charge, with suitable mounting on door frame,
consisting of vertical styles, top rail & side rail 60 mm x 60 mm wide and bottom rail of 110
mm x 60 mm made out of 1.6mm thick G.I. sheet (zinc coating not less than
120gm/sqm) duly filled mineral wool insulation having density minimum 96 kg/cum and sqm 10.58 12,017.90 1,27,149.38
fixing with necessary stainless steel ball bearing hinges of size 100x89x3mm of approved
make, including applying a coat of approved fire resistant primer or powder coating not
less than 30 micron etc all complete as per direction of Engineer-in-Charge (panelling to
be paid for seperately).
Digitally signed by ARTI
DSR 2023 DESCRIPTION Unit Qty Rounded Rate DSR Amount
9.164 Providing and fixing glazing in fire resistant door shutters, fixed panels & partitions etc.,
with G.I. beading made out of 1.6 mm thick G.I. sheet (zinc coating not less than 120
gm/m²) of size 20 x 33 mm screwed with M4 x 38 mm SS screws at distance 75 mm from
the edges and 150 mm c/c , including applying a coat of approved fire resistant primer/
powder coating of not less than 30 micron on G.I. beading, & special
ceramic tape of 5 x 20 mm size etc complete in all respect as per NBC
2016, IS 16231 (Part 3):2016 and as per direction of Engineer-in-charge
with glass of required thickness having 120 minutes of fire resistance
both integrity & radiation control (EW120) and minimum 20 minutes of sqm 2.12 43,677.65 92,596.62
insulation (EI20). The manufacturer have to give test report/certification
of fire glass and the glass should have the stamp showing the value of
E, EW & EI. The glass shall be tested in approved NABL accredited lab
or by any other accreditation body which operates in accordance with
ISO/IEC 17011 and accredits labs as per ISO/IEC 17025 for testing and
calibration scopes shall be eligible. The maximum glazing size shall
not be more than 1100x2200 mm (w x h) or 2.42 sqm.
10.2 Structural steel work riveted, bolted or welded in built up sections, trusses and framed
work, including cutting, hoisting, fixing in position and applying a priming coat of approved Kg. 2785.31 133.70 3,72,395.95
steel primer all complete:
10.25 Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in
position and applying a priming coat of approved steel primer using structural steel etc. as
10.25.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works kg 336.00 172.60 57,993.60
10.27 Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener of
10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head,
comprising of 10 mm dia polyamide PA 6 grade sleeve, including drilling of hole in frame ,
concrete/ masonry, etc. as per direction of Engineer-in-charge.
Digitally signed by ARTI
DSR 2023 DESCRIPTION Unit Qty Rounded Rate DSR Amount
10.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels,
plates etc., including welding, grinding, buffing, polishing and making curvature (wherever
required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c
fixing the railing with necessary accessories & stainless steel dash fasteners , stainless
steel bolts etc., of required size, on the top of the floor or the side of waist slab with kg 682.08 772.40 5,26,838.59
suitable arrangement as per approval of Engineer-incharge, (for payment purpose only
weight of stainless steel members shall be considered excluding fixing accessories such
as nuts, bolts, fasteners etc.).
10.29 Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S.
Flat 15x3 mm and nuts & bolts complete.
10.29.2 Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both
11.41A Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the
manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of
approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement
mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm
including grouting the joints with white cement and matching pigments etc. The tiles must
be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the
notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet
for placing the tiles gently and easily.
11.41A.1 Double charge vitrified tile polished finish of size
11.46 Providing and laying Vitrified tiles in different sizes (thickness to be specified by
manufacturer), with water absorption less than 0.08 % and conforming to |.S. 15622, of
approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of
cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/
sqm including grouting the joint with white cement & matching pigments etc.
Digitally signed by ARTI
DSR 2023 DESCRIPTION Unit Qty Rounded Rate DSR Amount
11.52 Providing and laying machine cut, mirror polished Marble stone flooring, in required design
(Simple geometrical, abstract etc.) and in patterns in combination with Italian marble
stones of different colours, shades and finished surface texture etc., in linear portions of
the building, all complete as per the architectural drawings, with 18 mm thick stone slab
laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand)
laid and jointed with white cement slurry @ 4.4 kg/sqm, including
pointing with white cement slurry admixed with pigment to match the marble shade,
including rubbing, curing and polishing etc. all complete as specified and as directed by
the Engineer-in-Charge.
11.52.1 18 mm thick Italian Marble stone slab, Perlato, Rosso verona, Fire Red or Dark
Emperadore etc.
11.56 Providing and laying Polished Granite stone flooring in required design and patterns, in
linear as well as curvilinear portions of the building all complete as per the architectural
drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar
1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white
cement slurry admixed with pigment of matching shade including rubbing , curing and
polishing etc. all complete as specified and as directed by the Engineer-in-Charge.
11.56.2 Polished Granite stone slab of all colour and texture except Black, Cherry/Ruby Red
12.21 Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone
aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : metre 183.81 305.15 56,089.62
3 fine sand) as per standard design : In 75x75mm deep chase
12.22 Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4
(1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C.
sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 each 19.00 298.25 5,666.75
coarse sand) and a coat of neat cement, rounding the edges and making and finishing the
outlet complete.
Digitally signed by ARTI
DSR 2023 DESCRIPTION Unit Qty Rounded Rate DSR Amount
12.45 Providing and fixing false ceiling at all height including providing and fixing of frame work
made of special sections, power pressed from M.S. sheets and galvanized with zinc
coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats
of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at
1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x
50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of
25x10x0.50 mm of required length with nuts & bolts of required size and other end of
hanger fixed with intermediate G.I. channels 45x15x0.9 mm running
at the spacing of 1200 mm centre to centre, to which the ceiling
section 0.5 mm thick bottom wedge of 80 mm with tapered flanges
of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre,
shall be fixed in a direction perpendicular to G.I. intermediate channel
with connecting clips made out of 2.64 mm dia x 230 mm long G.I.
wire at every junction, including fixing perimeter channels 0.5 mm
thick 27 mm high having flanges of 20 mm and 30 mm long, the
perimeter of ceiling fixed to wall/partition with the help of rawl plugs
at 450 mm centre, with 25mm long dry wall screws @ 230 mm
interval, including fixing of gypsum board to ceiling section and
perimeter channel with the help of dry wall screws of size 3.5 x 25
mm at 230 mm c/c, including jointing and finishing to a flush finish
of tapered and square edges of the board with recommended jointing
compound , jointing tapes , finishing with jointing compound in 3
layers covering upto 150 mm on both sides of joint and two coats of
primer suitable for board, all as per manufacturer's specification and
also including the cost of making openings for light fittings, grills,
diffusers, cutouts made with frame of perimeter channels suitably
fixed, all complete as per drawings, specification and direction of
the Engineer in Charge but excluding the cost of painting with :
12.45.3 12.5 mm thick tapered edge gypsum moisture resistant board Sqm 1237.60 1,529.10 18,92,414.16
Digitally signed by ARTI
DSR 2023 DESCRIPTION Unit Qty Rounded Rate DSR Amount
12.52 Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true
horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel
sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T"
runner with suitably spaced joints to get required length and of size 24x38 mm made from
0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of
size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between
main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross
"T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be
interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall
angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid
including, required cutting/making, opening for services like diffusers, grills, light fittings,
fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI
slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm
long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size
85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed
width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for
all heights as per specifications, drawings and as directed by
Engineer-in-charge.
12.52.2 GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595
mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100
gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and
having NRC (Noise Reduction Coefficient ) of 0.5, electro statically polyester powder
coated of thickness 60 microns (minimum), including factory painted after
bending and perforation and backed with a black Glass fiber
acoustical fleece.
13.1 12 mm cement plaster of mix :
13.11 18 mm cement plaster in two coats under layer 12 mm thick cement plaster
1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement
plaster 1:6 (1 cement : 6 fine sand).
Digitally signed by ARTI
DSR 2023 DESCRIPTION Unit Qty Rounded Rate DSR Amount
13.16 6 mm cement plaster of mix :
13.37 White washing with lime to give an even shade :New work (three or more coats) Sqm. 73.92 39.05 2,886.58
13.45 Finishing walls with textured exterior paint of required shade :
13.45.1 New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat
of exterior primer applied @ 2.20kg/10 sqm
13.80 Providing and applying white cement based putty of average thickness 1 mm, of approved
brand and manufacturer, over the plastered wall surface to prepare the surface even and sqm 3984.96 156.05 6,21,853.01
smooth complete.
13.83 Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile
Organic Compound ) content less than 50 grams/ litre of approved brand and
manufacture, including applying additional coats wherever required to achieve even shade
13.114 Melamine polishing on wood work (one or more coat). sqm 257.60 138.10 35,574.56
21.3 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions
etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings
and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid
in basic item):
21.3.2 With float glass panes of 5.5 mm thickness (weight not less than 12.50 kg/ sqm) sqm 141.93 1,505.25 2,13,640.13
21.8 Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by
providing weather silicon sealant over backer rod of approved quality as per architectural
drawings and direction of Engineer-in-charge
21.8.1 Upto 5 mm depth and 5 mm width metre 840.00 96.75 81,270.00
21.15 Providing and fixing aluminium casement windows fastener of required length for
aluminium windows with necessary screws etc. complete.
21.15.1 Anodized (AC 15) aluminium each 175.00 89.40 15,645.00
21.18 Providing and fixing 12 mm thick frameless toughened glass door shutter of approved
brand and manufacture, including providing and fixing top & bottom pivot & double action
hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing sqm 4.70 5,325.90 25,031.73
required door fittings, all complete as per direction of Engineer-incharge (Door handle,
lock and stopper etc.to be paid separately).
Digitally signed by ARTI
DSR 2023 DESCRIPTION Unit Qty Rounded Rate DSR Amount
22.3 Providing and laying water proofing treatment to vertical and horizontal surfaces of
depressed portions of W.C., kitchen and the like consisting of:
(i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound
conforming to IS 2645 in recommended proportions including rounding off junction of
vertical and horizontal surface.
(ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water
proofing compound in recommended proportion including rounding off junction of vertical
and horizontal surface.
(iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of
(iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be
100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm).
22.7 Providing and laying integral cement based water proofing treatment including preparation
of surface as required for treatment of roofs, balconies, terraces etc consisting of following
(a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water
proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the
RCC slab including adjoining walls upto 300 mm height including cleaning the surface
before treatment.
(b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size
with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing
compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick
layer of cement mortar of mix 1:5 (1 cement :5 coarse sand) admixed with water proofing
compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope
and treating similarly the
adjoining walls upto 300 mm height including rounding of junctions
of walls and slabs.
Digitally signed by ARTI
DSR 2023 DESCRIPTION Unit Qty Rounded Rate DSR Amount
c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/
sqm of cement admixed with water proofing compound conforming to IS : 2645 and
approved by Engineerin- charge.
(d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4
coarse sand) admixed with water proofing compound conforming to IS : 2645 and
approved by Engineerin- charge including laying glass fibre cloth of approved quality in top
layer of plaster and finally finishing the surface with trowel
with neat cement slurry and making pattern of 300x300 mm square 3 mm deep.
(e) The whole terrace so finished shall be flooded with water for a minimum period of two
weeks for curing and for final test. All above operations to be done in order
22.7.1 With average thickness of 120mm and minimum thickness at khurra as 65 mm. sqm 902.72 1,684.60 15,20,722.11
STRUCTURAL GLAZING:
Providing and supplying aluminium extruded tubular and other aluminium sections as per
the architectural drawings and approved shop drawings , the aluminium quality as per
grade 6063 T5 or T6 as per BS 1474,including super durable powder coating of 60-80
microns conforming to AAMA 2604 of required colour and shade as approved by the
Engineer-in-Charge. ( The item includes cost of material such as cleats, sleeves, screws
etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be
paid on this account). The weight of aluminium extruded section shall be taken for
purpose of payment.
Digitally signed by ARTI
DSR 2023 DESCRIPTION Unit Qty Rounded Rate DSR Amount
Designing, fabricating, testing, protection, installing and fixing in position semi (grid)
unitized system of structural glazing (with open joints) for linear as well as curvilinear
portions of the building for all heights and all levels, including:
(a) Structural analysis & design and preparation of shop drawings for the specified design
loads conforming to IS 875 part III (the system must passed the proof test at 1.5 times
design wind pressure without any failure), including functional design of the aluminum
sections for fixing glazing panels of various thicknesses, aluminium
cleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc.,
structural and weather silicone sealants, flashings, fire stop (barrier)-cum-smoke seals,
microwave cured EPDM gaskets for water tightness, pressure equalisation &
drainage and protection against fire hazard including:
b.) Fabricating and supplying serrated M.S. hot dip galvanised /
Aluminium alloy of 6005 T5 brackets of required sizes, sections
and profiles etc. to accommodate 3 Dimentional movement for
25.2 achieving perfect verticality and fixing structural glazing system Sqm 61.29 3,510.50 2,15,158.55
rigidly to the RCC/ masonry/structural steel framework of building
structure using stainless steel anchor fasteners/ bolts, nylon
seperator to prevent bimetallic contacts with nuts and washers
etc. of stainless steel grade 316, of the required capacity and in
required numbers.
c.) Providing and filling, two part pump filled, structural silicone
sealant and one part weather silicone sealant compatible with
the structural silicone sealant of required bite size in a clean
and controlled factory / work shop environment, including double
sided spacer tape, setting blocks and backer rod, all of approved
grade, brand and manufacture, as per the approved sealant
design, within and all around the perimeter for holding glass.
(d) Providing and fixing in position flashings of solid aluminium sheet
1 mm thick and of sizes, shapes and profiles, as required as per
the site conditions, to seal the gap between the building structure
Digitally signed by ARTI
DSR 2023 DESCRIPTION Unit Qty Rounded Rate DSR Amount
Providing, assembling and supplying vision glass panels (IGUs) comprising
of hermetically-sealed 6-12- 6 mm insulated glass (double glazed) vision panel units of
size and shape as required and specified, comprising of an outer heat strengthened float
glass 6mm thick, of approved colour and shade with reflective soft coating on surface
# 2 of approved colour and shade, an inner Heat strengthened clear float glass 6mm
thick, spacer tube 12mm wide, dessicants, including primary seal and secondary
seal (structural silicone sealant) etc. all complete for the required performances, as per
the Architectural drawings, as per the approved shop drawings, as specified and as
directed by the Engineer-in-Charge. The IGUs shall be assembled in the factory/
workshop of the glass processor.
(Payment for fixing of IGU Panels in the curtain glazing is included in cost of item No.
For payment, only the actual area of glass on face # 1 of the glass panels (excluding the
areas of the grooves and weather silicone sealant) provided and fixed in position, shall be
measured in sqm.
(i) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face # 2,
+ 12mm Airgap + 6mm Heat Strengthened clear Glass of approved make having
properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflection internal 10 to
15%, light reflection external 10 to 20 %, shading coefficient (0.25- 0.28) and U value
of 3.0 to 3.3 W/m2 degree K etc. The properties of performance glass shall be
decided by technical sanctioning authority as per the site requirement.
Extra for openable side / top hung vision glass panels (IGUs) including
providing and supplying at site all accessories and hardwares for the openable panels as
specified and of the approved make such as heavy duty stainless steel friction hinges, min
4 -point cremone locking sets with stainless steel plates, handles, buffers etc. including
necessary stainless steel screws/ fasteners, nuts, bolts, washers etc. all complete
as per the Architectural drawings, as per the approved shop drawings, as specified and
as directed by the Engineer- in-Charge.
Digitally signed by ARTI
DSR 2023 DESCRIPTION Unit Qty Rounded Rate DSR Amount
Providing, fabricating and supplying shadow box of required size and shape,
for fixing in the spandrel portion of the structural glazing, in linear as well as curvilinear
portions of the building by providing semi -rigid, inorganic, non- combustible fibre glass
wool insulation 50 mm thick, conforming to IS: 8183 and BS: 3958 Part 5. The insulation
layer shall have facing (factory bonded on surface # 1 of the fibre glass insulation layer), of
black non-woven fibre glass tissue of nominal thickness 0.5 mm and nominal mass not
less than 60 gm / sqm, made of randomly oriented glass fibres distributed in a binder by a
wet- lay process including fixing 1.5 mm thick solid aluminum sheet backing using, 6 mm
thick cement board including SS rivets, nuts, bolts, washers etc complete.
TOTAL OF SCHEDULE ITEM 552,45,015.69
NON-SCHEDULE ITEM
MR-1 Providing and fixing Glass Reinforced Concrete (G.R.C) Screens casted with 'Spray Mix'
concrete design in approved size, pattern, thickness of 50mm on the outer Border & 25-
30mm for Internal member or overall thickness of 40mm and shade. The Screens should
be made from ‘43 grade’ Portland Cement , White Quartz fine graded sieve Silica Sand,
Alkali Resistant Glass Fibre , Super Plasticizers , Polymers and U.V resistant Synthetic
inorganic pigments should be used for pigmentation. The Screens casting shall take place
with layering methodology using- Direct Power Spray machines. The GRC Screens
flexural strength average L.O.P should be above or equivalent to 6 N/mm² & M.O.R should sqm 139.27 10,380.00 14,45,622.60
be above or equivalent to 12 N/mm² for tests done on 28 days cured samples. The fixing
of Screens should be done using ‘Dry fixing’ method onto structural support members i.e.
R.C.C, Brick work MS Framework. MS Galvanized CLAMPS & PINS also if required
fasteners to be used. ALL CAST in SOCKET TO BE EPOXY PRIMER COATED. Vendor
shall submit shop drawings of same, the drawings to be duly approved from Engineer in
charge at site.
MR-2 Providing & fixing in position necessary Glass Door Fittings. The work shall be carried out
as per specifications, drawings and as per directions of the engineer-in-charge.
a.) Top Patch - Variable pivot point of 55 or 65mm -With SS 304 cover- Finish: SSS each 3.00 2,694.00 8,082.00
b.) Bottom Patch- Variable pivot point of 55 or 65mm- With SS 304 cover - Finish: SSS
c.) High security patch lock - Finish: SSS each 3.00 4,845.00 14,535.00
Digitally signed by ARTI
DSR 2023 DESCRIPTION Unit Qty Rounded Rate DSR Amount
d.) 32X457MM -D Type Pull Handle 325 back to back fixing for glass, wood and metal doors
in satin stainless steel. Length =457mm, 32mm dia, -Finish-SSS, 304 Grade; Center to each 3.00 3,580.00 10,740.00
Center - 305mm x 12mm Hole Dia.
MR-3 Providing and applying surface Stone textured finish with 100% natural granite & ceramic
protection coating of approved shade or approved equivalent make) comprising of water-
borne, penetrating, water repellent EM- primer & super durable water based acrylic silicon
resin clear and super durable dirt and dust resistant protection coat of FSI Clear coat,
which shall be highly water repellant, Anti-algae & anti-fungal in nature to external wall
surfaces. The coating shall also cover hairline cracks with application method which
includes one coat of El primer, one coat of Stoney, all in approved colour and texture. It
shall also include preparation of surface, appropriate primer coat etc. applied as per
manufacturer's & Engineer in charge instructions. Scaffolding and staging shall be
allowed as required. The finish shall be in natural colour/ non pigmented, water repellant,
resistant to ultra violet, alkali and condensate formation . All hairline cracks/ crazing shall
be covered & shall ensure good breathability for the substrate. Finished work would be
to the satisfaction of the Engineer in charge.
TOTAL OF NON-SCHEDULE ITEM 20,94,769.80
Digitally signed by ARTI
NAME OF THE PROJECT: CONSTRUCTION OF PROPOSED NEW BUILDING BLOCKS (INTERNATIONAL GUEST HOUSE, CANTEEN COMPLEX,
MARKET AND BANK BUILDING, DISPENSARY AND EXTERNAL DEVELOPMENT WORKS FOR RLBCAU, DATIA.
ESTIMATE - INTERNATIONAL GUEST HOUSE (PLUMBING ITEMS)
DSR -2023 DESCRIPTION OF ITEM
/NS ITEM DSR-2023 AMOUNT
No. RATE (RS.) (RS.)
SANITARY FIXTURE
17.4 Providing and fixing white vitreous china flat back or wall corner type lipped front
urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with
automatic flushing cistern with standard flush pipe and C.P. brass spreaders with
brass unions and G.I clamps complete, including painting of fittings and brackets,
cutting and making good the walls and floors wherever required
17.4.1 One urinal basin with 5 litre white P.V.C. automatic flushing cistern Each 1 6258.75 6258.75
17.4.2 Range of two urinal basin with 5 litre white P.V.C. automatic flushing cistern
8.1 Providing and fixing stone slab with table rubbed, edges rounded and polished, of
size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase
of appropriate width with chase cutter and embedding the stone in the chase
with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4
graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge
and finished smooth.
8.10.2 Granite Stone of approved shade Each 2 4051.85 8103.70
17.7A Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole
basin mixer of approved quality and make, including painting of fittings and
brackets, cutting and making good the walls wherever required:
White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single
hole basin mixer
Digitally signed by ARTI
17.10 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983
with C.I. brackets and stainless steel plug 40 mm,including painting of fittings and
brackets, cutting and making good the walls wherever required :
17.10.1 Kitchen sink with drain board
17.22A Providing and fixing CP Brass 32mm size Bottle Trap of
approved quality & make and as per the direction of Engineerin-
17.22 B Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make
as approved by Engineer in charge.
a) 15 mm nominal dia Each 24 6940.75 166578.00
17.31 Providing and fixing 600x450 mm beveled edge mirror of superior
glass (of approved quality) complete with 6 mm thick hard board
ground fixed to wooden cleats with C.P. brass screws and washers
17.34 Providing and fixing toilet paper holder :
18.21 Providing and fixing uplasticised PVC connection pipe with brass
18.21.1 30cm length
18.21.1.1 15mm nominal bore Each 77 85.00 6545.00
18.22 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet
18.49 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931
18.49.1 15mm nominal bore Each 4 506.80 2027.20
18.53 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of
approved quality conforming to IS:8931
18.53.1 15mm nominal bore Each 77 574.30 44221.10
Digitally signed by ARTI
18.53A Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of
approved make and quality as per direction of Engineer-in-charge.
SUB TOTAL( SANITARY FIXTURE) 461663.40
NS-1 Providing and fixing Wall Hung water closet with Half frame & Consealed
flushing cistren ,flush plate, along with all accessories , complete in all respect as Each 27 24973.33 674279.91
per the direction of Engineer-in-Charge.
NS-2 Providing and fixing C.P. brass 2 Way bib cock with Health Faucet ABS with Rubbit
Cleaning System 1.25 m Long SS Flexible Tube & ABS Wall Hook as per direction Each 27 3452.35 93213.33
of Engineer-in-charge.-
NS-3 Providing and fixing single lever sink mixer (wall mounted) complete in all respect
NS-4 Providing and fixing waste coupling 32 mm dia SS complete in all respect Each 29 363.90 10552.98
NS-5 Providing and fixing soap tumbler holder (Brass) complete in all respect Each 27 867.75 23429.30
NS-6 Providing and fixing ss towel rod complete in all respect Each 26 1026.37 26685.70
NS-7 Providing and fixing Stainless steel grating with frame for floor traps or drains of
required pattern complete in all respect
NS-8 Providing and fixing Flash touch-free infrared hand dryer complete in all respect
NS-9 Providing & Fixing of Grab bar size U-type 600X600 mm pipe O.D 32 mm ,
thiickness 2 mm of non slipping grip as per standard specification of use in
disabled toilet complete with brackets suitable for wall installation as per
approved sample complete in all respect.
NS-10 Providing & Fixing of Grab bar straight CP brass size 300 mm pipe O.D 32 mm ,
thiickness 2 mm of non slipping grip as per standard specification of use in
disabled toilet complete with brackets suitable for wall installation as per
approved sample complete in all respect.
NS-11 Providing & Fixing of Grab bar straight CP brass size 600 mm pipe O.D 32 mm ,
thiickness 2 mm of non slipping grip as per standard specification of use in
disabled toilet complete with brackets suitable for wall installation as per
approved sample complete in all respect.
SUB TOTAL( NS-SANITARY FIXTURE) 1203945.02
Digitally signed by ARTI
SOIL ,WASTE & VENT PIPES AND FITTINGS
17.35 Providing and fixing soil, waste and vent pipes :
17.35.1.3 Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside
17.35.2.3 Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside
17.37 Providing and fixing M.S. holder-bat clamps of approved design to
Sand Cast iron/cast iron (spun) pipe embedded in and including
cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2
coarse sand : 4 graded stone aggregate 20 mm nominal size),
including cost of cutting holes and making good the walls etc. :
17.38 Providing and fixing bend of required degree with access door, insertion rubber
washer 3 mm thick, bolts and nuts complete.
17.38.1.3 Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per
17.38.2.3 Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per
17.39 Providing and fixing plain bend of required degree
17.39.1.3 Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside
17.39.2.3 Hubless centrifugally cast (spun) iron pipe epoxy coated inside & outside
17.43 Providing and fixing single equal plain junction of required degree with access
door, insertion rubber washer 3 mm thick, bolts and nuts complete.
Digitally signed by ARTI
17.43.1.2 Sand cast iron S&S as per IS - 3989 Each 16 925.70 14811.20
17.44 Providing and fixing single equal plain junction of required degree :
17.44.1.3 Hubless centrifugally cast (spun) iron epoxy
coated inside & outside as per IS:159
17.56 Providing and fixing terminal guard :
17.56.1.3 Hubless centrifugally cast (spun) iron epoxy
coated inside & outside as per IS:15905
17.56.2.2 Sand Cast iron S&S as per IS-3989 Each 11 404.75 4452.25
17.57A Providing and fixing shielded coupling for Hubless centrifugally cast iron pipe
17.57A.1 100 mm dia
17.57A.1.1 SS 304 grade coupling with EPDM rubber gasket Each 96 432.05 41476.80
17.57A.2 75mm dia
17.57A.2.1 SS 304 grade coupling with EPDM rubber gasket Each 33 389.05 12838.65
17.59 Providing and fixing M.S. stays and clamps for sand cast iron/
centrifugally cast (spun) iron pipes of diameter :
17.60 Providing and fixing trap of self cleansing design with screwed down or hinged
grating with or without vent arm complete, including cost of cutting and making
good the walls and floors :
17.60.1 a) 100 mm inlet and 100 mm outlet
17.60.1.3 Hubless centrifugally cast (spun) iron epoxy
coated inside & outside as per IS:15905
17.60.2 b) 100 mm inlet and 75 mm outlet
17.60.2.3 Hubless centrifugally cast (spun) iron epoxy coated
inside & outside as per IS:15905
Digitally signed by ARTI
17.61 Cutting chases in brick masonry walls for following diameter sand cast iron/
centrifugally cast (spun) iron pipes and making good the same with cement
concrete 1:3:6 ( 1 cement : 3 coarse sand :6 graded stone aggregate 12.5 mm
nominal size), including necessary plaster and pointing in cement mortar 1:4 (1
cement : 4 coarse sand) :
SUB TOTAL( SOIL, WASTE & VENT PIPES) 952237.83
NS-12 Providing and fixing Clean out plug with clamp complete in all respect Each 16 814.75 13036.06
NS-13 Providing and fixing uPVC SCH-80 pipe for waste wash basin to Floor trap with
fittings complete in all respect
NS-14 Providing and fixing 100 x 75 x50 mm multy inlet (smart) floor trap hubless
including cost of cutting and making good the walls and floors :
NS-15 Providing and fixing Multy Inlet (100x50) hubless Pipe including cost of cutting
and making good the walls and floors :
SUB TOTAL NON SCHEDULED ( SOIL, WASTE & VENT PIPES) 76910.52
18.7 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,
having thermal stability for hot & cold water supply, including all
CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00
m spacing. This includes jointing of pipes & fittings
with one step CPVC solvent cement and testing of joints complete
as per direction of Engineer in Charge.
Internal work - Exposed on wall
18.7.2 20 mm nominal outer dia Pipes Mtr 12 335.00 4020.00
18.7.3 25 mm nominal outer dia Pipes Mtr 66 401.55 26502.30
18.7.4 32 mm nominal outer dia Pipes Mtr 85 518.75 44093.75
18.7.5 40 mm nominal outer dia Pipes Mtr 52 702.95 36553.40
18.7.6 50 mm nominal outer dia Pipes Mtr 22 934.15 20551.30
NS-16 Providing and fixing CPVC SCH-80 pipe (3/5 mtr) 65 mm nominal outer dia Pipes
Digitally signed by ARTI
18.8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,
having thermal stability for hot & cold water supply, including all
CPVC plain & brass threaded fittings, i/c fixing the pipe with clampsat 1.00 m
spacing. This includes jointing of pipes & fittings with onestep CPVC solvent
cement and the cost of cutting chases and making good the same including
testing of joints complete as per direction of Engineer in Charge.
Concealed work, including cutting chases and making good the walls etc.
18.8.1 15 mm nominal outer dia Pipes Mtr 31 497.80 15431.80
18.8.2 20 mm nominal outer dia Pipes Mtr 68 537.60 36556.80
18.8.3 25 mm nominal outer dia Pipes Mtr 58 627.25 36380.50
18.8.4 32 mm nominal outer dia Pipes Mtr 32 739.30 23657.60
18.10 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting
and making good the walls etc.
Internal work-Exposed on wall
18.10.4 32 mm dia nominal bore Mtr 15 667.00 10005.00
18.10.5 40 mm dia nominal bore Mtr 15 811.90 12178.50
18.12 Providing and fixing G.I. pipes complete with G.I. fittings including trenching and
18.12.4 32 mm dia nominal bore Mtr 118 540.30 63755.40
18.12.5 40 mm dia nominal bore Mtr 110 617.05 67875.50
18.12.6 50 mm dia nominal bore Mtr 20 762.15 15243.00
18.13 Making connection of G.I. distribution branch with G.I. main of following sizes by
providing and fixing tee, including cutting and threading the pipe etc. complete :
18.13.1 25 to 40 mm nominal bore Each 2 911.90 1823.80
18.17 Providing and fixing gun metal gate valve with C.I. wheel of approved
quality (screwed end) :
18.17.1 25mm nominal bore Each 7 622.40 4356.80
18.17.1 A 20 mm nominal bore Each 1 539.95 539.95
18.17.2 32mm nominal bore Each 10 689.60 6896.00
18.17.3 40mm nominal bore Each 4 826.10 3304.40
Digitally signed by ARTI
18.17.4 50mm nominal bore Each 2 1026.65 2053.30
18.17.5 65 mm nominal bore Each 1 1742.15 1742.15
18.18 Providing and fixing ball valve (brass) of approved quality, High or low pressure,
with plastic floats complete :
18.18.2 20 mm nominal bore Each 2 462.50 925.00
18.19 Providing and fixing gun metal non- return valve of approved quality
(screwed end) :
18.19.3 40 mm nominal bore
18.19.3.1 Horizontal Each 1 952.60 952.60
18.19.4 50 mm nominal bore
18.19.5 65 mm nominal bore
SUB TOTAL( WATER SUPPLY) 455513.43
NON SCHEDULED ( WATER SUPPLY )
NS-17 Providing & Fixing Stainless Steel Water Cooler Size L ,Number of faucets-
2,Cooling Capacity - 40 L/h ,Storage capacity-80 L ,Refrigerant - R-134a eco
friendly (Non CFC) USP- #High-quality stainless steel tank and components for
safe drinking water # Reliable reciprocating compressor for longer product life
#Accessories: Water inlet hosepipe and overflow pipes provided with the unit
#Specially designed float valves made of food-grade plastic #Adjustable pedestals
made of highly non-corrosive and strong material With Water Purifier RO 25
ltr/hour tank capacity 6 ltr
NS-18 Providing and fixing geyser (25 ltrs)complete in all respect Each 1 9940.27 9940.27
NS-19 Providing and fixing geyser (15 ltrs)complete in all respect Each 24 8882.79 213187.00
Digitally signed by ARTI
NS-20 Self-priming close-coupled centrifugal pumps with built-in ejector system,
coupled with a Asynchronous, squirrel cage rotor, IE2 efficiency class ,
enclosed construction in aluminum casing, external ventilation, Protection:
IP55. / 415 or 230 V / 50 Hz, Class 155 (F) insulation. Performances
according to EN 60034-1. ,Maximum ambient temperature: 40°C. , (- Single-
phase version: 220-240 V 50 Hz, 2 poles with built-in automatic reset
overload protection. Three-phase version: 220-240/380-415 V 50 Hz), with
SS body , SS 304 impeller & with fill & drain plug , with mechnical seal
complying to Mechanical seal with mounting dimensions according to
SUB TOTAL NON SCHEDULED ( WATER SUPPLY) 539363.55
RAIN WATER PIPING
12.44 Providing and fixing to the inlet mouth of rain water pipe cast iron
grating 15 cm diameter and weighing not less than 440 grams. Each 12 54.70 656.40
12.41 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes
conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS
: 5382, leaving 10 mm gap for thermal Expansion,(i) Single socketed pipes.
12.42 Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories
for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A,
including jointing with seal ring conforming toIS : 5382, leaving 10 mm gap for
thermal expansion.
12.42.1 Coupler
12.42.2 Single push fit Coupler
12.42.3 Single tee with door
Digitally signed by ARTI
12.42.6 Shoe (Plain)
12.43 Providing and fixing unplastisized PVC pipe clip approved design to unplastisized
PVC rain water pipes by meanes of 50x50x50 mm hard wood plugs,screwed with
M.S screws of required length,including cutting brick and fixing in cement morter
1:4(1 cement:4 coarse sand) and making good the wall etc complete.
SUB TOTAL( RAIN WATER PIPING) 68375.60
SEWERAGE & DRAINAGE
19.1 Providing,laying and jointing glazed stoneware pipes class SP-1 with stiff mixture
of cement mortar in the proportion of 1:1 (1 cement: 1 fine sand) including
testing of joints etc. complete :
19.2 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse
sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes
including bed concrete as per standard design :
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10
19.3 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes
including bed concrete as per standard design :
19.3.2 150 mm diameter S.W. pipe Mtr 140 743.10 104034.00
19.3.3 200 mm diameter S.W. pipe Mtr 122 873.50 106567.00
Digitally signed by ARTI
19.4 Providing and fixing square-mouth S.W. gully trap class SP-1
complete with C.I. grating brick masonry chamber with water tight
C.I. cover with frame of 300 x300 mm size (inside) the weight of
cover to be not less than 4.50 kg and frame to be not less than 2.70kg as per
standard design:
19.4.1 100x100mm size 'P' type
19.4.1.1 With common burnt clay F.P.S. (non modular)
bricks of class designation 7.5
19.6 Providing and laying non-pressure NP2 class (light duty) R.C.C.pipes with collars
jointed with stiff mixture of cement mortar in theproportion of 1:2 (1 cement : 2
fine sand) including testing of joints etc. complete :
19.7 Constructing brick masonry manhole in cement mortar 1:4 ( 1
cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1
cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size),
foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone
aggregate 40 mm nominal size), inside plastering 12 mm thick with cement
mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement
and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4
graded stone aggregate 20 mm nominal size) finished with a floating coat of neat
cement complete as per standard design :
19.7.1 Inside size 90x80 cm and 45 cm deep including C.I. coverwith frame (light duty)
455x610 mm internal dimensions,total weight of cover and frame to be not less
than 38 kg(weight of cover 23 kg and weight of frame 15 kg) :
19.7.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 14 12770.55 178787.70
19.8 Extra for depth for manholes :
19.8.1 Size 90x80 cm
19.8.1.1 With common burnt clay F .P .S. (non modular) Mtr 1 8825.40 8825.40
Digitally signed by ARTI
19.9 Constructing brick masonry circular type manhole 0.91 m internaldia at bottom
and 0.56m dia at top in cement mortar 1:4 (1 cement: 4 coarse sand), inside
cement plaster 12 mm thick with cementmortar 1:3 (1 cement : 3 coarse sand)
finished with a floating coatof neat cement, foundation concrete 1:3:6 mix (1
cement : 3 coarsesand : 6 graded stone aggregate 40 mm nominal size), and
makingnecessary channel in cement concrete 1:2:4 (1 cement : 2 coarsesand : 4
graded stone aggregate 20 mm nominal size) finishedwith a floating coat of neat
cement, all complete as per standard
19.9.1 0.91 m deep with S.F.R.C. cover and frame (heavy duty, HD-20 grade designation)
560 mm internal diameter conforming to I.S. 12592, total weight of cover and
frame to be not less than 182 kg., fixed in cement concrete 1:2:4 (1cement : 2
coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering,
shuttering all complete. (Excavation, foot rests and 12mm thick cement plaster at
the external surface shall be paid for separately) :
19.9.1.1 With common burnt clay F.P.S. (non modular)
bricks of class designation 7.5
19.16 Providing orange colour safety foot rest of minimum 6 mm thickplastic
encapsulated as per IS : 10910, on 12 mm dia steel barconforming to IS: 1786,
having minimum cross section as 23 mmx25mm and over all minimum length 263
mm and width as 165 mm withminimum 112 mm space between protruded legs
having 2 mm treadon top surface by ribbing or chequering besides necessary
andadequate anchoring projections on tail length on 138 mm as perstandard Each 58 553.70 32114.60
drawing and suitable to with stand the bend test and chemical resistance test as
per specifications and having manufacture's permanent identification mark to be
visible even after fixing, including fixing in manholes with 30x20x15 cm cement
concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm
nominal size) complete as per design.
Digitally signed by ARTI
19.21 Making connection of drain or sewer line with existing manhole
including breaking into and making good the walls, floors with cementconcrete
1:2:4 mix (1 cement : 2 coarse sand : 4 graded stoneaggregate 20 mm nominal
size) cement plastered on both sideswith cement mortar 1:3 (1 cement : 3 coarse
sand), finished with afloating coat of neat cement and making necessary channels
forthe drain etc. complete :
19.21.1 For pipes 100 to 250 mm diameter Each 1 810.45 810.45
Providing sand cast iron drop connection externally for 60 cm drop
from branch sewer line to main sewer manhole including inspectionand cleaning
eye with chain and lid, sand cast iron drop pipe andbend encased all-round with
cement concrete 1:5:10 (1 cement :5 fine sand : 10 graded stone aggregate 40
mm nominal size) withall centering and shuttering required, cutting holes in walls
19.22 andmaking good with brick work in cement mortar 1:4 (1 cement : 4coarse sand)
plastered with cement mortar 1:3 (1 cement : 3coarse sand) on inside of the
manhole wall, lead caulked jointsbetween sand cast iron pipes and fittings, stiff
cement mortar 1:1(1 cement : 1 fine sand) joints between sand cast iron tee
andS.W. pipe, making required channels complete as per standarddesign and
specifications :
19.22.2 150 mm dia sand cast iron drop connection Each 2 16577.80 33155.60
19.27 Constructing brick masonry road gully chamber 50x45x60 cm with bricks in
cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast
R.C.C. horizontal grating with frame complete as per standard design :
19.27.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
SUB TOTAL( SEWERAGE & DRAINAGE) 1003201.20
2.6 Earth work in excavation by mechanical means (Hydraulic excavator)/manual
means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on
plan) including getting out and disposal of excavated earth lead upto 50 m and lift
upto 1.5 m, as directed by Engineer-in-charge.
Digitally signed by ARTI
2.6.1 All kind of soil Cum 51 177.50 9059.32
2.25 Filling available excavated earth (excluding rock) in trenches, plinth, sides of
foundations etc. in layers not exceeding 20cm in depth, consolidating each
deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m
2.10 Excavating trenches of required width for pipes, cables, etc includingexcavation
for sockets, and dressing of sides, ramming of bottoms,depth upto 1.5 m,
including getting out the excavated soil, and thenreturning the soil as required, in
layers not exceeding 20 cm in depth,including consolidating each deposited layer
by ramming, watering,etc. and disposing of surplus excavated soil as directed,
within a leadof 50 m :
2.10.1 All kinds of soil
2.10.1.2 Pipes, cables etc. exceeding 80mm dia but not exceeding 300mm dia Mtr 456 352.15 160580.40
SUB TOTAL( EARTH WORK) 175033.48
Digitally signed by ARTI
NAME OF THE PROJECT: CONSTRUCTION OF PROPOSED NEW BUILDING BLOCKS (INTERNATIONAL GUEST HOUSE, CANTEEN COMPLEX,
MARKET AND BANK BUILDING, DISPENSARY AND EXTERNAL DEVELOPMENT WORKS FOR RLBCAU, DATIA.
ESTIMATE - INTERNATIONAL GUEST HOUSE (FIRE FIGHTING ITEMS)
Item Code AMOUNT
No. DSR RATE INCLUDING
DESCRIPTION OF ITEMS QTY UNIT DSR-2022
2022 E &M GST FACTOR MR DSR-2022(E&M) MR
(E&M)RATE (RS.)
SUB HEAD - A : PUMPS & EQUIPMENTS
18.4 Supplying , Installation , Testing and Commissioning of Electric Driven Terrace
Pump Suitable for Automatic operation and Consisting of Following Complete in
all Respect as Required ( Terrace Fire Pump )
a) Horizontal Type Multistage , Centrifugal Pump of Cast Iron Body and Bronze
Impeller with Stainless Steel Shaft Mechanical Seal Conforming to IS : 1520
b) Suitable HP Squirrel cage Induction motor , TEFC , synchronous speed 1500 RPM ,
Suitable for operation on 415 Volts 3 Phase 50 Hz AC Supply with IP 68 protection
for enclosure Horizontal Foot Mounted type with class F insulation Conforming to
IS : 325 with Energy Efficiency class IE-3
c) MS Fabricated Common Base Plate Coupling , Coupling Guard Foundation bolts
etc as Required
d) Suitable Cement Concrete Foundation duly Plastered with anti vibration Pads
The Head of the Pump is Selected in a manner so as to give a minimum 3.5
kg/sqcm pressure at the highest / farthest point
18.20 Supplying and Fixing Air Vessel made of 450 mm dia 8 mm thick ms sheet 2000
mm in height with air release valve on top and flanged connection to riser drain
arrangement with 25 mm dia gunmetal wheel valve with required accessories
pressure gauge and painting with synthetic enamel paint of approved shade as
TOTAL CARRIED TO SUMMARY SHEET FOR SUB HEAD A 1,30,457.34 -
PIPING, HYDRANT , AND ACCESSORIES SYSTEM
18.7 Providing Laying Testing and Commissioning of C class Heavy duty MS Pipe
Conforming to IS : 1239 / 3589 including Fittings like elbows , tees , flanges ,
tapers , nuts , bolts , gaskets etc in ground including welding excavation and
Providing cement concrete blocks as supports anticorrosive treatment with
coaltar / asphalts tape as per IS :10221 refilling the trench etc of following sizes
complete as required .
Digitally signed by ARTI
NAME OF THE PROJECT: CONSTRUCTION OF PROPOSED NEW BUILDING BLOCKS (INTERNATIONAL GUEST HOUSE, CANTEEN COMPLEX,
MARKET AND BANK BUILDING, DISPENSARY AND EXTERNAL DEVELOPMENT WORKS FOR RLBCAU, DATIA.
ESTIMATE - INTERNATIONAL GUEST HOUSE (FIRE FIGHTING ITEMS)
Item Code AMOUNT
No. DSR RATE INCLUDING
DESCRIPTION OF ITEMS QTY UNIT DSR-2022
2022 E &M GST FACTOR MR DSR-2022(E&M) MR
(E&M)RATE (RS.)
18.11 Supplying Fixing Testing and Commissioning of butterfly valve of PN 1.6 Rating
with Bronze Gunmetal Sheet duly ISI marked complete with nuts , bolts , washers
, gaskets conforming to IS : 13095 of following sizes as required .
18.12 Supplying, fixing, testing & commissioning of double flanged sluice valve of rating
PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked complete with
nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as
18.14 Providing Installation Testing and Commissioning of Non Return Valve of
following sizes conforming to IS : 5312 complete with rubber gasket , GI Bolts ,
Nuts , washers etc as required .
18.15 Providing Installation Testing and Commissioning of Stainless Steel Y Strainer
fabricated out of 1.6 mm thick stainless steel , Grade 304 , Sheet with 3 mm dia
holes with stainless steel flange .
18.9 Supplying and Fixing Single Headed Internal Hydrant Valve with instantaneous
gunmetal material coupling of 63 mm dia with cast iron wheel ISI marked
conforming to IS : 5290 ( Type A ) with blank Gunmetal material cap and chain as
18.9.1 Single Headed Gunmetal Material 4 Set 7,646.00 8,129.99 32,519.97
18.13 Supplying and Fixing orifice plate made out of 6 mm thick stainless steel ( Grade
304 ) with orifice of required size to be fitted between flange and landing valve of
external and internal hydrants to reduce pressure at the outlet to the level of 3.5
kg / sqcm complete as required . 4 Each 1,321.00 1,404.62 5,618.48
Digitally signed by ARTI
NAME OF THE PROJECT: CONSTRUCTION OF PROPOSED NEW BUILDING BLOCKS (INTERNATIONAL GUEST HOUSE, CANTEEN COMPLEX,
MARKET AND BANK BUILDING, DISPENSARY AND EXTERNAL DEVELOPMENT WORKS FOR RLBCAU, DATIA.
ESTIMATE - INTERNATIONAL GUEST HOUSE (FIRE FIGHTING ITEMS)
Item Code AMOUNT
No. DSR RATE INCLUDING
DESCRIPTION OF ITEMS QTY UNIT DSR-2022
2022 E &M GST FACTOR MR DSR-2022(E&M) MR
(E&M)RATE (RS.)
18.16 Supplying and Fixing 63 mm dia 15 m Long RRL Hose pipe with 63 mm dia male
and female coupling duly bound with GI wire , rivet etc . Conforming to IS : 636 (
Type A ) as Required .
18.17 Supplying and Fixing First aid hose reel with MS Construction Spray painted in
Post office red conforming to IS : 884 complete with the following as required
20 mm nominal internal dia water hose thermoplastic ( Textile Reinforced ) Type -
2 as per IS : 12585
20 mm nominal internal dia gunmetal globe valve and nozzle
Drum and Brackets for fixing the equipments on wall
Connections from Riser with 25 mm dia stop gunmetal valve and MS Pipe and
18.18 Supplying and Fixing 63 mm dia Gunmetal Short Branch Pipe with 20 mm nominal
internal diameter size nozzle conforming to IS : 903 suitable for instantaneous
connection to interconnect hose pipe coupling as required .
18.22 Providing and Fixing of Pressure Switch in MS Pipe Line including connection etc
NON-SCHEDULED ITEMS
NS-1 Providing and fixing of Fire Hose Cabinet size not less than 2.1 x 1.2 x 0.90 mtr
made out of M.S. sheet not less than 1.5 mm thick having central opening and 4
mm thick glazed glass doors (Two nos.) suitably marked on the outside 'with
the letters "FIRE HOSE" including necessary locking arrangement and painting in
PO red colour suitable to accommodate, internal hydrant valve, 2 nos 15 mtr
long Hose pipe, branch pipe, nozzle and fire man's axe. It shall be fixed inside the
FHC Cabinet Complete as required .
NS-2 Providing and fixing standard firemans axe with heavy rubber handle. 4 Each 1285.00 5,140.00
Digitally signed by ARTI
NAME OF THE PROJECT: CONSTRUCTION OF PROPOSED NEW BUILDING BLOCKS (INTERNATIONAL GUEST HOUSE, CANTEEN COMPLEX,
MARKET AND BANK BUILDING, DISPENSARY AND EXTERNAL DEVELOPMENT WORKS FOR RLBCAU, DATIA.
ESTIMATE - INTERNATIONAL GUEST HOUSE (FIRE FIGHTING ITEMS)
Item Code AMOUNT
No. DSR RATE INCLUDING
DESCRIPTION OF ITEMS QTY UNIT DSR-2022
2022 E &M GST FACTOR MR DSR-2022(E&M) MR
(E&M)RATE (RS.)
NS-3 Providing and fixing dial type pressure gauge with isolation cock and copper
pipe on main header Dial diameter 100 mm celebration 0-16 / sq. cm.
NS-4 Co2 type Fire Extinguisher 4.5 Kgs. Capacity, made from brand new seamless
cylinder, as per IS: 7285 and CCE approval, fitted with Discharge hose and horn
and wheel type valve with initial Charge as per IS: 15683:2018 specification,
bearing ISI Mark & EIL approved. 8 Each 9865.12 78,920.99
NS-5 ABC Stored Pressure type Fire Extinguisher 6 Kgs. capacity bearing ISI Mark for
Fighting ABC Class of Fire. The Extinguisher will be Manufactured Strictly as per
BIS: 15683:2018 bearing ISI. mark. MAP 40% a) In built NRV on valve to cross
check internal pressure.
b) Operating temperature marking on valve.
c) Automatic safety release valve.
d) Non Returnable Valve 8 3993.03 31,944.21
NS-6 Water Stored Pressure type Fire Extinguisher, 9 Litre’s capacity Fire
Extinguishers.The Extinguisher will be Manufactured Strictly as per BIS:
15683:2018 bearing ISI. mark. 8 Each 3640.70 29,125.60
TOTAL CARRIED TO SUMMARY SHEET FOR SUB HEAD B 5,26,657.81 2,63,124.76
Digitally signed by ARTI
NBCC (INDIA) LTD
NAME OF THE PROJECT: CONSTRUCTION OF PROPOSED NEW BUILDING BLOCKS (INTERNATIONAL GUEST HOUSE, CANTEEN COMPLEX,
MARKET AND BANK BUILDING, DISPENSARY AND EXTERNAL DEVELOPMENT WORKS FOR RLBCAU, DATIA.
ESTIMATE - CANTEEN AND ACTIVITY HALL (CIVIL ITEMS)
DESCRIPTION Unit Qty Rounded Rate DSR Amount
1.0 CARRIAGE OF MATERIAL
1.1 By Mechanical Transport including loading,unloading and stacking
1.1.2 Carriage of earth
1.1.4 Carriage of excavated rock
2.6 Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over
areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting
out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-
2.6.1 All kinds of soil cum 375.32 177.50 66,619.30
Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in
foundation over areas (exceeding 30cm in depth , 1.5 m in width or 10 sqm on plan),
2.7 including disposal of excavated earth, for all leads and lifts, disposed earth to be levelled
and neatly dressed.
2.8 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in
foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including
dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the
excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
2.25 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations
etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming cum 396.95 196.00 77,802.20
and watering, lead up to 50 m and lift upto 1.5 m.
Digitally signed by ARTI
DESCRIPTION Unit Qty Rounded Rate DSR Amount
2.25(a) Excavating, supplying, stacking and filling of local earth (including royalty) by mechanical
transport upto a lead of 5km also including ramming and watering of the earth in layers not
exceeding 20 cm in foundation trenches, plinth, sides of foundation etc. complete for all lift.
2.27 Sand filling in plinth including supply of necessary quantity of sand from any distance at site
of work and including watering dressing etc. required for proper completion of work. cum 82.80 2,123.75 1,75,846.50
2.34 Supplying chemical emulsion in sealed containers including delivery as specified.
2.34.1 Chlorpyriphos/Lindane Emulsifiable concentrate of 20%. Ltr. 77.05 234.75 18,087.49
2.35 Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite
2.35.2 Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25
litres per linear metre including drilling and plugging holes etc.: With Chlorpyriphos/ Lindane metre 127.65 53.45 6,822.89
E.C. 20% with 1% concentration
4.1 Providing and laying in position cement concrete of specified grade excluding the cost of
centering and shuttering - All work up to plinth level
4.1.8 1:4:8 (1 Cement : 4 coarse sand (zone-lll) derived from natural sources : 8 graded stone
aggregate 40 mm nominal size derived from natural sources)
4.17 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6
graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40
mm nominal size, well rammed and consolidated and grouted with fine sand, including Sqm 78.20 749.30 58,595.26
necessary excavation, levelling & dressing & finishing the top smooth.
5.3 Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15°
landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral
stair cases above plinth level up to floor five level, including the cost of centering, shuttering, cum 21.73 11,505.50 2,50,014.52
finishing and excluding reinforcement with 1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded
stone aggregate 20 mm nominal size).
5.9 Centering and shuttering including strutting, propping etc. and removal of form for all heights
5.9.1 Foundations, footings, bases of columns etc. for mass concrete. sqm 344.21 392.15 1,34,981.95
5.9.2 Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
5.9.3 Suspended floors, roofs, landings, balconies and access platform. sqm 954.50 927.25 8,85,060.13
Digitally signed by ARTI
DESCRIPTION Unit Qty Rounded Rate DSR Amount
5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers. Sqm 1340.90 736.40 9,87,438.76
5.9.6 Columns, Pillars, Piers, Abutments, posts and Struts Sqm 523.25 961.30 5,03,000.23
5.9.7 Stairs, (excluding landings) except spiral-staircases. Sqm 39.72 764.95 30,383.81
5.9.16 Edges of slabs and breaks in floors and walls.
5.9.19 Weather shade, chajjas, corbels etc. including edges. sqm 41.92 951.10 39,870.11
5.22 Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position
and binding all complete upto plinth level
5.22.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. kg 30909.17 107.85 33,33,553.98
5.22 A Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in
position and binding all complete above plinth level.
5.22A.6 Thermo-Mechanically Treated bars of grade Fe-500 D or more. kg 40966.87 107.85 44,18,276.93
5.33 Providing and laying in position ready mixed or site batched design mix cement concrete for
reinforced cement concrete work; using coarse aggregate and fine aggregate derived from
natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures
in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to
improve durability and workability without impairing strength; including pumping of concrete
to site of laying, curing, carriage
for all leads; but excluding the cost of centering, shuttering, finishing and
reinforcement as per direction of the engineer-in-charge, for the following grades of
Note: Extra cement up to 10% of the minimum specified cement content
in design mix shall be payable separately. In case the cement content in
design mix is more than 110% of the specified minimum cement content,
the contractor shall have discretion to either re-design the mix or bear the
cost of extra cement.
5.33.1 All works upto plinth level
5.33.1.1 Concrete of M25 grade with minimum cement content of 350 kg /cum cum 149.50 9,504.75 14,20,960.13
5.33.1.2 Concrete of M30 grade with minimum cement content of 350 kg /cum cum 16.10 9,655.70 1,55,456.77
5.33.2 All works above plinth level upto floor V level
5.33.2.1 Concrete of M25 grade with minimum cement content of 350 kg /cum cum 254.99 9,860.40 25,14,303.40
5.33.2.2 Concrete of M30 grade with minimum cement content of 350 kg /cum cum 70.21 10,011.35 7,02,896.88
5.30 Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.
5.35 Add for using extra cement in the items of design mix over and above the specified cement
content therein.
Digitally signed by ARTI
DESCRIPTION Unit Qty Rounded Rate DSR Amount
6.1 Brick work with common burnt clay F.P.S. (non modular) bricks of class
designation 7.5 in foundation and plinth in:
6.1.2 Cement mortar 1:6 (1 cement : 6 coarse sand) cum 21.92 7,132.25 1,56,338.92
6.4 Brick work with common burnt clay F.P.S. (non modular) bricks of class
designation 7.5 in superstructure above plinth level up to floor V level in
all shapes and sizes in:
6.4.2 Cement mortar 1:6 (1 cement: 6 coarse sand) cum 25.00 9,105.95 2,27,648.75
6.44 Brick edging 7cm wide 11.4 cm deep to plinth protection with common burnt clay F.P.S. (non
modular) bricks of class designation 7.5 including grouting with cement mortar 1:4 (1 cement Mtr 127.65 59.45 7,588.79
: 4 fine sand).
6.38 Providing and laying Autoclaved Aerated concrete(AAC) blocks masonry
100 mm/ 125 mm thick with Grade-1 AAC blocks of density 551 to 650
kg/cum conforming to 1S:2185 (Part 3) in super structure above plinth
level up to floor V level in cement mortar 1:4 (1 cement : 4 coarse sand ).
The rate includes providing and placing in position 2 Nos 6 mm dia M.S.
bars at every third course of masonry work.
6.47 Providing and laying Autoclaved Aerated concrete(AAC) blocks masonry with 150 mm to
300 mm thick with Grade-1 AAC blocks of density 551 to 650 kg/cum conforming to IS:2185
(Part 3) in super structure above plinth level up to floor V level with RCC band at sill level
and lintel level with approved block laying polymer modified adhesive mortar all complete as cum 224.00 8,333.65 18,66,737.60
per direction of Engineer-in-Charge. (The payment of RCC band and
reinforcement shall be made for seperately).
8.2 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and
prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and
similar locations of required size, approved shade, colour and texture laid over 20 mm thick
base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed
with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing
of edges to give high gloss finish etc. complete
8.3 Providing edge moulding to 18 mm thick marble stone counters, Vanities
etc., including machine polishing to edge to give high gloss finish etc.
complete as per design approved by Engineer-in-Charge.
Digitally signed by ARTI
DESCRIPTION Unit Qty Rounded Rate DSR Amount
8.5 Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen
platform, vanity counter and similar location in marble/ Granite/ stone work, including
necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid
door/window/clerestory windows & desertory other Frames/Chowkhat comprising
of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and
natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum
toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent
cement and screwed with full body threaded star headed SS screws having minimum frame
density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge),
minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and
26.86 resistance to spread of flame of Class A category with property of being termite/borer -
proof, water/moisture proof and fire retardant and fixed in position with M.S hold
fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-
In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately).
Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth
and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be
acceptable but no extra payment on this account shall be made.
Digitally signed by ARTI
DESCRIPTION Unit Qty Rounded Rate DSR Amount
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid
plain flush door shutter of required size comprising of virgin polymer of K value 58-60
(Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat
husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum
density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge),
26.87 minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and -
resistance to spread of flame of Class A category with property of being termite/borer
proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges
of required size with necessary full body threaded star headed counter sunk S.S screws,
all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and
necessary S.S screws shall be paid separately)
Providing and fixing bright finished brass tower bolts (barrel type) with
necessary screws etc. complete :
Providing and fixing chromium plated brass handles with necessary
screws etc. complete:
Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy
weight) with stainless steel screws etc. complete :
Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc.
complete : (copper oxidized as per IS: 1378)
Providing and fixing bright finished brass hanging type floor doo stopper with necessary
screws, etc. complete.
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of
approved quality) complete with 6 mm thick hard board ground fixed to wooden
cleats with C.P. brass screws and washers complete.
9.26 Extra for cutting rebate in flush door shutters (Total area of the shutter to be measured).
Digitally signed by ARTI
DESCRIPTION Unit Qty Rounded Rate DSR Amount
9.53 Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm
diameter bolts, nuts and wooden plugs and embedding in cement concrete block
30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal
9.84 Providing and fixing aluminium extruded section body tubular type universal hydraulic door
closer (having brand logo with ISI, IS: 3564, embossed on the body, door weight upto 36 Kg.
to 80 Kg. and door width from 701 mm to 1000 mm), with double speed adjustment with
necessary accessories and screws etc. complete.
9.101 Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic
coating not less than grade AC 10 as per IS :1868) transparent or dyed to required colour or -
shade with necessary screws etc. complete:
9.101.2 Twin rubber stopper Each 21.00 72.35 1,519.35
9.103 Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI marked, with
six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868)
aluminium lever handles of approved quality with necessary screws etc. complete.
9.119 Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness
of 5 mm, made out of extruded 5 mm rigid PVC foam sheet, mitred at corners and joined
with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame
profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket metre 30.29 492.70 14,923.88
weather seal to be provided through out the frame. The door frame to be fixed to the wall
using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and
direction of Engineerin- Charge.
Digitally signed by ARTI
DESCRIPTION Unit Qty Rounded Rate DSR Amount
9.120 Providing and fixing factory made panel PVC door shutter consisting of frame made out of
M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for
top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and
manufacture. M.S. frame covered with 5 mm thick heat moulded PVC ‘C’ channel of size 30
mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in
45 degree angle on both side forming styles and 5mm thick, 95 mm wide PVC sheet out of
which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form
top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20
mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be
provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be -
provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet
to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm)
thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent
cement dhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the
interior side of the ‘C’ Channel using PVC solvent adhesive etc. complete as per direction of
Engineer-in-charge, manufacturer’s specification & drawing.
9.120.1 30 mm thick plain PVC door shutters sqm 9.64 3,182.95 30,683.64
9.121 Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90
mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness.
The laminate shall be moulded with fire resistant grade unsaturated polyester resin and
chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable metre 7.25 570.95 4,139.39
wooden block in all the three legs. The frame shall be covered with fiber glass from all sides.
M.S. stay shall be provided at the bottom to steady the frame.
9.122 Providing and fixing to existing door frames. -
9.122.2 30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and
wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm
thick FRP laminate all around, with suitable wooden blocks inside at required places for
fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used
as filler material throughout the hollow panel, casted monolithically with testing parameters
of F.R.P. laminate conforming to table - 3 of IS: 14856, complete as per
direction of Engineer-in-charge.
Digitally signed by ARTI
DESCRIPTION Unit Qty Rounded Rate DSR Amount
9.127 Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss /
matt / suede finish with high density protective surface layer and reverse side of adhesive
bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved
9.139 Providing and fixing panic bar / latch (Double point) fitted with a single body, Trim Latch &
Lock on back side of the Panic Latch of reputed brand and manufacture to be approved by each 4.00 8,366.15 33,464.60
the Engineer- in- charge, all complete.
9.161 Providing and fixing fire resistant door frame of section 50 x 60 mm on horizontal side & 35 x
60 mm on vertical sides having built in rebate made out of 1.6 mm thick GI sheet ( Zinc
coating not less than 120gm/ sqm) suitable for mounting 120 minutes Fire Rated Glazed
Door Shutters. The frame shall be filled with mineral wool Insulation having density minimum
96Kg/cum. The frame will have a provision of G.I. anchor FAstners 14 nos ( 5 each on
vertical style & 4 on horizontal style of size M10 x 80 ) suitable for fixing in the opening along meter 21.74 2,202.90 47,891.05
with factory made template for SS ball bearing hinges of Size 100x89x3mm for fixing of fire
rated glazed shutter . The frame shall be finished with a approved fire resistant primer or
powder coating of not less than 30 micron in desired shade as per the directions of Engineer
- in- Charge . (Cost of SS ball bearing hinges is excluded).
9.162 Providing and fixing 60 mm thick glazed fire resistant door shutters of 120 minutes fire rating
confirming to IS:3614 (Part II) or EN1634-1:1999, tested and certified as per laboratory
approved by Engineer-in-Charge, with suitable mounting on door frame, consisting of vertical
styles, top rail & side rail 60 mm x 60 mm wide and bottom rail of 110 mm x 60 mm made
out of 1.6mm thick G.I. sheet (zinc coating not less than
120gm/sqm) duly filled mineral wool insulation having density minimum 96 kg/cum and fixing sqm 12.42 12,017.90 1,49,262.32
with necessary stainless steel ball bearing hinges of size 100x89x3mm of approved make,
including applying a coat of approved fire resistant primer or powder coating not less than 30
micron etc all complete as per direction of Engineer-in-Charge (panelling to be paid for
Digitally signed by ARTI
DESCRIPTION Unit Qty Rounded Rate DSR Amount
9.164 Providing and fixing glazing in fire resistant door shutters, fixed panels & partitions etc., with
G.I. beading made out of 1.6 mm thick G.I. sheet (zinc coating not less than 120 gm/m²) of
size 20 x 33 mm screwed with M4 x 38 mm SS screws at distance 75 mm from the edges
and 150 mm c/c , including applying a coat of approved fire resistant primer/ powder coating
of not less than 30 micron on G.I. beading, & special
ceramic tape of 5 x 20 mm size etc complete in all respect as per NBC
2016, IS 16231 (Part 3):2016 and as per direction of Engineer-in-charge
with glass of required thickness having 120 minutes of fire resistance
both integrity & radiation control (EW120) and minimum 20 minutes of sqm 2.48 43,677.65 1,08,320.57
insulation (EI20). The manufacturer have to give test report/certification
of fire glass and the glass should have the stamp showing the value of
E, EW & EI. The glass shall be tested in approved NABL accredited lab
or by any other accreditation body which operates in accordance with
ISO/IEC 17011 and accredits labs as per ISO/IEC 17025 for testing and
calibration scopes shall be eligible. The maximum glazing size shall
not be more than 1100x2200 mm (w x h) or 2.42 sqm.
9.170 Providing and fixing stainless steel fancy handle of approved make fixed with SS screws etc.
complete as per direction of Engineer-in-charge.
10.2 Structural steel work riveted, bolted or welded in built up sections, trusses and framed work,
including cutting, hoisting, fixing in position and applying a priming coat of approved steel Kg. 762.64 133.70 1,01,964.97
primer all complete:
10.5 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and
3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete,
including applying a priming coat of approved steel primer.
10.5.1 Using M.S. angels 40x40x6 mm for diagonal braces sqm 4.14 5,804.35 24,030.01
10.16 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc.,
including cutting, hoisting, fixing in position and applying a priming coat of approved steel
primer, including welding and bolted with special shaped washers etc. complete.
10.16.2 Hot finished seamless type tubes kg 30595.03 206.35 63,13,284.44
10.19 Providing and fixing mild steel round holding down bolts with nuts and washer plates
Digitally signed by ARTI
DESCRIPTION Unit Qty Rounded Rate DSR Amount
10.25 Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in
position and applying a priming coat of approved steel primer using structural steel etc. as
10.25.1 In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever
required, all complete
10.25.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works kg 82.80 172.60 14,291.28
10.27 Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener of
10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head,
comprising of 10 mm dia polyamide PA 6 grade sleeve, including drilling of hole in frame ,
concrete/ masonry, etc. as per direction of Engineer-in-charge.
10.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels,
plates etc., including welding, grinding, buffing, polishing and making curvature (wherever
required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c
fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel
bolts etc., of required size, on the top of the floor or the side of waist slab with suitable
arrangement as per approval of Engineer-incharge, (for payment purpose only weight of
stainless steel members shall be considered excluding fixing accessories such as nuts,
bolts, fasteners etc.).
10.29 Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat
15x3 mm and nuts & bolts complete.
10.29.2 Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both
11.26 Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey
cement slurry mixed with pigment to match the shade of the slab, including rubbing and
polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :
11.27 Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm
(average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement
slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing
Digitally signed by ARTI
DESCRIPTION Unit Qty Rounded Rate DSR Amount
11.41A Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the
manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of
approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement
mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including
grouting the joints with white cement and matching pigments etc. The tiles must be cut with
the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel,
plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the
tiles gently and easily.
11.41A.1 Double charge vitrified tile polished finish of size
11.46 Providing and laying Vitrified tiles in different sizes (thickness to be specified by
manufacturer), with water absorption less than 0.08 % and conforming to |.S. 15622, of
approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of
cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/
sqm including grouting the joint with white cement & matching pigments etc.
11.56 Providing and laying Polished Granite stone flooring in required design and patterns, in linear
as well as curvilinear portions of the building all complete as per the architectural drawings
with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1
cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement
slurry admixed with pigment of matching shade including rubbing , curing and polishing etc.
all complete as specified and as directed by the Engineer-in-Charge.
11.56.2 Polished Granite stone slab of all colour and texture except Black, Cherry/Ruby Red Sqm 185.12 3,071.05 5,68,512.78
12.1 Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer
coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or
with G.I. limpet washers filled with white lead, including a coat of approved steel primer and
two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/
vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including
cutting to size and shape wherever
12.1.2 0.80 mm thick with zinc coating not less than 275 gm/m? Sqm 920.00 1,257.55 11,56,946.00
Digitally signed by ARTI
DESCRIPTION Unit Qty Rounded Rate DSR Amount
12.21 Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone
aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 metre 140.42 305.15 42,849.16
fine sand) as per standard design : In 75x75mm deep chase
12.45 Providing and fixing false ceiling at all height including providing and fixing of frame work
made of special sections, power pressed from M.S. sheets and galvanized with zinc coating
of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25
mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at
1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x
50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of
25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle
hanger fixed with intermediate G.I. channels 45x15x0.9 mm running
at the spacing of 1200 mm centre to centre, to which the ceiling
section 0.5 mm thick bottom wedge of 80 mm with tapered flanges
of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre,
shall be fixed in a direction perpendicular to G.I. intermediate channel
with connecting clips made out of 2.64 mm dia x 230 mm long G.I.
wire at every junction, including fixing perimeter channels 0.5 mm
thick 27 mm high having flanges of 20 mm and 30 mm long, the
perimeter of ceiling fixed to wall/partition with the help of rawl plugs
at 450 mm centre, with 25mm long dry wall screws @ 230 mm
interval, including fixing of gypsum board to ceiling section and
perimeter channel with the help of dry wall screws of size 3.5 x 25
mm at 230 mm c/c, including jointing and finishing to a flush finish
of tapered and square edges of the board with recommended jointing
compound , jointing tapes , finishing with jointing compound in 3
layers covering upto 150 mm on both sides of joint and two coats of
primer suitable for board, all as per manufacturer's specification and
also including the cost of making openings for light fittings, grills,
diffusers, cutouts made with frame of perimeter channels suitably
fixed, all complete as per drawings, specification and direction of
the Engineer in Charge but excluding the cost of painting with :
12.45.3 12.5 mm thick tapered edge gypsum moisture resistant board Sqm 1127.00 1,529.10 17,23,295.70
Digitally signed by ARTI
DESCRIPTION Unit Qty Rounded Rate DSR Amount
12.50 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of
corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness
with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns
epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should
have protective guard film of 25 microns minimum to avoid scratches during transportation
and should be supplied in single length upto 12 metre or as desired by Engineerin- charge.
The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with
EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the
cost of purlins, rafters and trusses
12.51 Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05
%) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel
grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18
microns using self drilling/ self tapping screws complete :
12.51.6 Gutter (600 mm over all girth) Sqm 88.55 1,313.70 1,16,328.14
12.52 Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true
horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel
sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner
with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm
thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm
made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600
mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600
mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle
of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3
mm and laying false ceiling tiles of approved texture in the grid including, required
cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke
detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size
27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4
mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced
at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections
shall be pre-painted with polyester paint, all complete for all heights as per specifications,
drawings and as directed by
Engineer-in-charge.
Digitally signed by ARTI
DESCRIPTION Unit Qty Rounded Rate DSR Amount
12.52.2 GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm
and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm
(both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC
(Noise Reduction Coefficient ) of 0.5, electro statically polyester powder coated of thickness
60 microns (minimum), including factory painted after
bending and perforation and backed with a black Glass fiber
acoustical fleece.
13.1 12 mm cement plaster of mix :
13.11 18 mm cement plaster in two coats under layer 12 mm thick cement plaster
1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement
plaster 1:6 (1 cement : 6 fine sand).
13.16 6 mm cement plaster of mix :
13.37 White washing with lime to give an even shade :New work (three or more coats) Sqm. 10.35 39.05 404.17
13.45 Finishing walls with textured exterior paint of required shade :
13.45.1 New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of
exterior primer applied @ 2.20kg/10 sqm
13.48A Finishing walls with ready mixed Premium acrylic emulsion paint having VOC less than 50
gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance
exterior paint of required shade with silicon additives.
13.48A.1 New work (Two or more coats applied @ 1.43 litre/ 10 sqm over and including priming coat
of exterior primer applied @ 0.90 litre/10 sqm.
13.83 Wall painting with premium acrylic emulsion paint of interior grade, having
VOC (Volatile Organic Compound ) content less than 50 grams/ litre of
approved brand and manufacture, including applying additional coats
wherever required to achieve even shade and colour.
13.80 Providing and applying white cement based putty of average thickness 1 mm, of approved
brand and manufacturer, over the plastered wall surface to prepare the surface even and sqm 2745.05 156.05 4,28,365.05
smooth complete.
13.114 Melamine polishing on wood work (one or more coat). sqm 111.55 138.10 15,405.06
Digitally signed by ARTI
DESCRIPTION Unit Qty Rounded Rate DSR Amount
ALUMINIUM WORK:
21 Providing and fixing aluminium work for doors, windows, ventilators and partitions with
extruded built up standard tubular sections/ appropriate Z sections and other sections of
approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required
dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides
with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust
free, straight, mitred and jointed mechanically wherever required including cleat angle,
Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all
complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing,
paneling and dash fasteners to be paid for separately) :
21.1.1 For fixed portion
21.1.1.1 Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868,
Minimum anodic coating of grade AC 15)
21.1.2 For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and
making provision for fixing of fittings wherever required including the cost of
EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)
21.1.2.1 Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868,
Minimum anodic coating of grade AC 15)
21.3 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc.
with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the
directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic
21.3.2 With float glass panes of 5.5 mm thickness (weight not less than 12.50 kg/ sqm) sqm 121.94 1,505.25 1,83,550.19
21.8 Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing
weather silicon sealant over backer rod of approved quality as per architectural drawings and
direction of Engineer-in-charge
21.8.1 Upto 5 mm depth and 5 mm width metre 259.20 96.75 25,077.60
21.15 Providing and fixing aluminium casement windows fastener of required length for aluminium
windows with necessary screws etc. complete.
21.15.1 Anodized (AC 15) aluminium each 104.00 89.40 9,297.60
Digitally signed by ARTI
DESCRIPTION Unit Qty Rounded Rate DSR Amount
21.17 Providing and fixing anodised aluminium grill (anodised transparent or dyed to required
shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved
design/pattern, with approved standard section and fixed to the existing window frame with
C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to
proper opening size for fixing and operation of handles and fixing approved anodised
aluminium standard section around the opening, all complete as per requirement and
direction of Engineer-in-charge. (Only weight of grill to be measured for payment).
WATER PROOFING:
22.3 Providing and laying water proofing treatment to vertical and horizontal surfaces of
depressed portions of W.C., kitchen and the like consisting of:
(i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound
conforming to IS 2645 in recommended proportions including rounding off junction of vertical
and horizontal surface.
(ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water
proofing compound in recommended proportion including rounding off junction of vertical
and horizontal surface.
(iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area.
(iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be
100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm).
STRUCTURAL GLAZING:
Providing and supplying aluminium extruded tubular and other aluminium sections as per the
architectural drawings and approved shop drawings , the aluminium quality as per grade
6063 T5 or T6 as per BS 1474,including super durable powder coating of 60-80 microns
conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-
Charge. ( The item includes cost of material such as cleats, sleeves, screws etc. necessary
for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this
account). The weight of aluminium extruded section shall be taken for purpose of payment.
Digitally signed by ARTI
DESCRIPTION Unit Qty Rounded Rate DSR Amount
Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized
system of structural glazing (with open joints) for linear as well as curvilinear portions of the
building for all heights and all levels, including:
(a) Structural analysis & design and preparation of shop drawings for the specified design
loads conforming to IS 875 part III (the system must passed the proof test at 1.5 times
design wind pressure without any failure), including functional design of the aluminum
sections for fixing glazing panels of various thicknesses, aluminium
cleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc.,
structural and weather silicone sealants, flashings, fire stop (barrier)-cum-smoke seals,
microwave cured EPDM gaskets for water tightness, pressure equalisation &
drainage and protection against fire hazard including:
b.) Fabricating and supplying serrated M.S. hot dip galvanised /
Aluminium alloy of 6005 T5 brackets of required sizes, sections
and profiles etc. to accommodate 3 Dimentional movement for
25.2 achieving perfect verticality and fixing structural glazing system Sqm 46.91 3,510.50 1,64,677.56
rigidly to the RCC/ masonry/structural steel framework of building
structure using stainless steel anchor fasteners/ bolts, nylon
seperator to prevent bimetallic contacts with nuts and washers
etc. of stainless steel grade 316, of the required capacity and in
required numbers.
c.) Providing and filling, two part pump filled, structural silicone
sealant and one part weather silicone sealant compatible with
the structural silicone sealant of required bite size in a clean
and controlled factory / work shop environment, including double
sided spacer tape, setting blocks and backer rod, all of approved
grade, brand and manufacture, as per the approved sealant
design, within and all around the perimeter for holding glass.
(d) Providing and fixing in position flashings of solid aluminium sheet
1 mm thick and of sizes, shapes and profiles, as required as per
the site conditions, to seal the gap between the building structure
Digitally signed by ARTI
DESCRIPTION Unit Qty Rounded Rate DSR Amount
Providing, assembling and supplying vision glass panels (IGUs) comprising
of hermetically-sealed 6-12- 6 mm insulated glass (double glazed) vision panel units of size
and shape as required and specified, comprising of an outer heat strengthened float glass
6mm thick, of approved colour and shade with reflective soft coating on surface # 2 of
approved colour and shade, an inner Heat strengthened clear float glass 6mm thick,
spacer tube 12mm wide, dessicants, including primary seal and secondary seal
(structural silicone sealant) etc. all complete for the required performances, as per the
Architectural drawings, as per the approved shop drawings, as specified and as directed by
the Engineer-in-Charge. The IGUs shall be assembled in the factory/ workshop of the
glass processor.
(Payment for fixing of IGU Panels in the curtain glazing is included in cost of item No. 25.2)
25.3 For payment, only the actual area of glass on face # 1 of the glass panels (excluding the Sqm 46.91 3,718.70 1,74,444.22
areas of the grooves and weather silicone sealant) provided and fixed in position, shall be
measured in sqm.
(i) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face # 2, +
12mm Airgap + 6mm Heat Strengthened clear Glass of approved make having properties as
visible Light transmittance (VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light
reflection external 10 to 20 %, shading coefficient (0.25- 0.28) and U value of 3.0 to 3.3
W/m2 degree K etc. The properties of performance glass shall be decided by
technical sanctioning authority as per the site requirement.
Extra for openable side / top hung vision glass panels (IGUs) including
providing and supplying at site all accessories and hardwares for the openable panels as
specified and of the approved make such as heavy duty stainless steel friction hinges, min 4 -
point cremone locking sets with stainless steel plates, handles, buffers etc. including
necessary stainless steel screws/ fasteners, nuts, bolts, washers etc. all complete as
per the Architectural drawings, as per the approved shop drawings, as specified and as
directed by the Engineer- in-Charge.
Digitally signed by ARTI
DESCRIPTION Unit Qty Rounded Rate DSR Amount
Providing, fabricating and supplying shadow box of required size and shape,
for fixing in the spandrel portion of the structural glazing, in linear as well as curvilinear
portions of the building by providing semi -rigid, inorganic, non- combustible fibre glass wool
insulation 50 mm thick, conforming to IS: 8183 and BS: 3958 Part 5. The insulation layer
shall have facing (factory bonded on surface # 1 of the fibre glass insulation layer), of black
non-woven fibre glass tissue of nominal thickness 0.5 mm and nominal mass not less than
60 gm / sqm, made of randomly oriented glass fibres distributed in a binder by a wet- lay
process including fixing 1.5 mm thick solid aluminum sheet backing using, 6 mm thick
cement board including SS rivets, nuts, bolts, washers etc complete.
TOTAL OF SCHEDULE ITEM 452,08,422.74
Digitally signed by ARTI
NAME OF THE PROJECT: CONSTRUCTION OF PROPOSED NEW BUILDING BLOCKS (INTERNATIONAL GUEST HOUSE, CANTEEN
COMPLEX, MARKET AND BANK BUILDING, DISPENSARY AND EXTERNAL DEVELOPMENT WORKS FOR RLBCAU, DATIA.
ESTIMATE - CANTEEN AND ACTIVITY HALL(PLUMBING ITEMS)
DSR-2023 AMOUNT
/NS ITEM DESCRIPTION OF ITEM UNIT QUANTITY
RATE (RS.) (RS.)
SANITARY FIXTURE
17.2 Providing and fixing white vitreous china pedestal type water closet (European
type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern,
including flush pipe, with manually controlled device (handle lever), conforming to
IS : 7231, with all fittings and fixtures complete, including cutting and making
good the walls and floors wherever required.
17.2.1 W.C. pan with ISI marked white solid plastic seat and lid Each 12 6515.55 78186.60
17.4 Providing and fixing white vitreous china flat back or wall corner type lipped front
urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with
automatic flushing cistern with standard flush pipe and C.P. brass spreaders with
brass unions and G.I clamps complete, including painting of fittings and brackets,
cutting and making good the walls and floors wherever required
17.4.2 Range of two urinal basin with 5 litre white P.V.C. automatic flushing cistern Each 1 9612.40 9612.40
17.4.3 Range of three urinal basin with 10 litre white P.V.C. automatic flushing cistern
Digitally signed by ARTI
8.1 Providing and fixing stone slab with table rubbed, edges rounded and polished, of
size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase
of appropriate width with chase cutter and embedding the stone in the chase
with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4
graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge
and finished smooth.
8.10.2 Granite Stone of approved shade Each 6 4051.85 24311.10
17.7 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brasspillar taps, 32
mm C.P. brass waste of standard pattern, including painting of fittings and
brackets, cutting and making good the wallswherever require:
17.7.2 White Vitreous China Wash basin size 630x450 mm with
a single 15 mm C.P. brass pillar taps Each 25 2226.35 55658.75
17.10 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983
with C.I. brackets and stainless steel plug 40 mm,including painting of fittings and
brackets, cutting and making good the walls wherever required :
17.10.1 Kitchen sink with drain board
17.22A Providing and fixing CP Brass 32mm size Bottle Trap of
approved quality & make and as per the direction of Engineerin- Each 35 1034.80 36218.00
17.31 Providing and fixing 600x450 mm beveled edge mirror of superior
glass (of approved quality) complete with 6 mm thick hard board
ground fixed to wooden cleats with C.P. brass screws and washers
17.34 Providing and fixing toilet paper holder :
18.21 Providing and fixing uplasticised PVC connection pipe with brass
Digitally signed by ARTI
18.21.1 30cm length
18.21.1.1 15mm nominal bore Each 31 85.00 2635.00
18.49 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931
18.49.1 15mm nominal bore Each 2 506.80 1013.60
18.53 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of
approved quality conforming to IS:8931
18.53.1 15mm nominal bore Each 31 574.30 17803.30
18.53A Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of
approved make and quality as per direction of Engineer-in-charge. Each 23 74.80 1720.40
SUB TOTAL( SANITARY FIXTURE) 318866.20
NS-1 Providing and fixing C.P. brass 2 Way bib cock with Health Faucet ABS with Rubbit
Cleaning System 1.25 m Long SS Flexible Tube & ABS Wall Hook as per direction Each 12 3452.35 41428.15
of Engineer-in-charge.-
NS-2 Providing and fixing single lever sink mixer (wall mounted) complete in all respect
NS-3 Providing and fixing SS waste coupling 32 mm dia complete in all respect
NS-4 Providing and fixing soap tumbler holder (Brass) complete in all respect
NS-5 Providing and fixing ss towel rod complete in all respect Each 3 1026.37 3079.12
NS-6 Providing and fixing Stainless steel grating with frame for floor traps or drains of
required pattern complete in all respect Each 28 1089.27 30499.67
Digitally signed by ARTI
NS-7 Providing and fixing Flash touch-free infrared hand dryer complete in all respect
NS-8 Providing & Fixing of Grab bar size U-type 600X600 mm pipe O.D 32 mm ,
thiickness 2 mm of non slipping grip as per standard specification of use in
disabled toilet complete with brackets suitable for wall installation as per
approved sample complete in all respect.
NS-9 Providing & Fixing of Grab bar straight CP brass size 600 mm pipe O.D 32 mm ,
thiickness 2 mm of non slipping grip as per standard specification of use in
disabled toilet complete with brackets suitable for wall installation as per
approved sample complete in all respect.
SUB TOTAL( NS-SANITARY FIXTURE) 212212.48
SOIL ,WASTE & VENT PIPES AND FITTINGS
17.35 Providing and fixing soil, waste and vent pipes :
17.35.1.3 Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside
17.35.2.3 Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside
17.37 Providing and fixing M.S. holder-bat clamps of approved design to
Sand Cast iron/cast iron (spun) pipe embedded in and including
cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2
coarse sand : 4 graded stone aggregate 20 mm nominal size),
including cost of cutting holes and making good the walls etc. :
Digitally signed by ARTI
17.37.2 For 75mm dia pipe Each 6 360.00 2160.00
17.38 Providing and fixing bend of required degree with access door, insertion rubber
washer 3 mm thick, bolts and nuts complete.
17.38.1.3 Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per
17.39 Providing and fixing plain bend of required degree
17.39.1.3 Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside
17.39.2.3 Hubless centrifugally cast (spun) iron Each 5 252.50 1262.50
17.43 pipesepoxy
Providing coated
and fixinginside
plain junction of required degree with access
door, insertion rubber washer 3 mm thick, bolts and nuts complete.
17.43.1.2 Sand cast iron S&S as per IS - 3989
17.44 Providing and fixing single equal plain junction of required degree :
17.44.1.3 Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:159
17.56 Providing and fixing terminal guard :
Digitally signed by ARTI
17.56.1.3 Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per
17.56.2.2 Sand Cast iron S&S as per IS-3989 Each 2 404.75 809.50
17.57A Providing and fixing shielded coupling for Hubless centrifugally cast iron pipe
17.57A.1 100 mm dia
17.57A.1.1 SS 304 grade coupling with EPDM rubber gasket Each 66 432.05 28342.48
17.57A.2 75mm dia
17.57A.2.1 SS 304 grade coupling with EPDM rubber gasket
17.59 Providing and fixing M.S. stays and clamps for sand cast iron/ centrifugally cast
(spun) iron pipes of diameter :
17.60 Providing and fixing trap of self cleansing design with screwed down or hinged
grating with or without vent arm complete, including cost of cutting and making
good the walls and floors :
17.60.1 a) 100 mm inlet and 100 mm outlet
17.60.1.3 Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per
17.60.2 b) 100 mm inlet and 75 mm outlet
17.60.2.3 Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per
Digitally signed by ARTI
17.61 Cutting chases in brick masonry walls for following diameter sand cast iron/
centrifugally cast (spun) iron pipes and making good the same with cement
concrete 1:3:6 ( 1 cement : 3 coarse sand :6 graded stone aggregate 12.5 mm
nominal size), including necessary plaster and pointing in cement mortar 1:4 (1
cement : 4 coarse sand) :
SUB TOTAL( SOIL, WASTE & VENT PIPES) 324682.24
NS-10 Providing and fixing Clean out plug with clamp complete in all respect Each 8 814.75 6518.03
NS-11 Providing and fixing uPVC SCH-80 pipe for waste wash basin to Floor trap with
fittings complete in all respect
NS-12 Providing and fixing 100 x 75 x50 mm multy inlet (smart) floor trap hubless
including cost of cutting and making good the walls and floors :
NS-13 Providing and fixing Multy Inlet pipe (100x50) hubless Pipe including cost of
cutting and making good the walls and floors : Each 2 1800.16 3600.33
SUB TOTAL NON SCHEDULED ( SOIL, WASTE & VENT PIPES) 20270.13
18.7 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,
having thermal stability for hot & cold water supply, including all
CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00
m spacing. This includes jointing of pipes & fittings
with one step CPVC solvent cement and testing of joints complete
as per direction of Engineer in Charge.
Digitally signed by ARTI
Internal work - Exposed on wall
18.7.2 20 mm nominal outer dia Pipes Mtr 8 335.00 2680.00
18.7.3 25 mm nominal outer dia Pipes Mtr 24 401.55 9637.20
18.7.4 32 mm nominal outer dia Pipes Mtr 35 518.75 18156.25
18.7.5 40 mm nominal outer dia Pipes Mtr 33 702.95 23197.35
18.7.6 50 mm nominal outer dia Pipes Mtr 14 934.15 13078.10
18.8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,
having thermal stability for hot & cold water supply, including all
CPVC plain & brass threaded fittings, i/c fixing the pipe with clampsat 1.00 m
spacing. This includes jointing of pipes & fittings with onestep CPVC solvent
cement and the cost of cutting chases and making good the same including
testing of joints complete as per direction of Engineer in Charge.
Concealed work, including cutting chases and making good the walls etc.
18.8.1 15 mm nominal outer dia Pipes Mtr 17 497.80 8462.60
18.8.2 20 mm nominal outer dia Pipes Mtr 41 537.60 22041.60
18.8.3 25 mm nominal outer dia Pipes Mtr 39 627.25 24462.75
18.8.4 32 mm nominal outer dia Pipes Mtr 18 739.30 13307.40
18.10 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting
and making good the walls etc.
Internal work-Exposed on wall
18.10.4 32 mm dia nominal bore Mtr 16 667.00 10672.00
Digitally signed by ARTI
18.12 Providing and fixing G.I. pipes complete with G.I. fittings including trenching and
18.12.4 32 mm dia nominal bore Mtr 18 540.30 9725.40
18.13 Making connection of G.I. distribution branch with G.I. main of following sizes by
providing and fixing tee, including cutting and threading the pipe etc. complete :
18.13.1 25 to 40 mm nominal bore Each 1 911.90 911.90
18.17 Providing and fixing gun metal gate valve with C.I. wheel of approved
quality (screwed end) :
18.17.1 25mm nominal bore Each 2 622.40 1244.80
18.17.1 A 20 mm nominal bore Each 1 539.95 539.95
18.17.2 32mm nominal bore Each 6 689.60 4137.60
18.17.3 40mm nominal bore Each 2 826.10 1652.20
18.17.4 50mm nominal bore Each 1 1026.65 1026.65
18.18 Providing and fixing ball valve (brass) of approved quality, High or low pressure,
with plastic floats complete :
18.18.2 20 mm nominal bore Each 1 462.50 462.50
18.19 Providing and fixing gun metal non- return valve of approved quality
(screwed end) :
18.19.3 40 mm nominal bore
18.19.3.1 Horizontal Each 1 952.60 952.60
Digitally signed by ARTI
18.19.4 50 mm nominal bore
18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage
tank, IS : 12701 marked, with cover and suitable locking arrangement and making
necessary holes for inlet, outlet and overflow pipes but without fittings and the
base support for tank
SUB TOTAL( WATER SUPPLY) 222720.05
NON SCHEDULED ( WATER SUPPLY )
NS-14 Providing & Fixing Stainless Steel Water Cooler Size L ,Number of faucets-
2,Cooling Capacity - 40 L/h ,Storage capacity-80 L ,Refrigerant - R-134a eco
friendly (Non CFC) USP- #High-quality stainless steel tank and components for
safe drinking water # Reliable reciprocating compressor for longer product life
#Accessories: Water inlet hosepipe and overflow pipes provided with the unit Each 2 60268.36 120536.72
#Specially designed float valves made of food-grade plastic #Adjustable pedestals
made of highly non-corrosive and strong material With Water Purifier Kent RO 25
ltr/hour tank capacity 6 ltr
NS-15 Providing and fixing geyser (25 ltrs)complete in all respect
SUB TOTAL NON SCHEDULED ( WATER SUPPLY) 130476.99
RAIN WATER PIPING
12.44 Providing and fixing to the inlet mouth of rain water pipe cast iron
grating 15 cm diameter and weighing not less than 440 grams. Each 6 54.70 328.20
Digitally signed by ARTI
12.41 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes
conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS
: 5382, leaving 10 mm gap for thermal Expansion,(i) Single socketed pipes.
12.42 Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories
for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A,
including jointing with seal ring conforming toIS : 5382, leaving 10 mm gap for
thermal expansion.
12.42.1 Coupler
12.42.2 Single push fit Coupler
12.42.3 Single tee with door
12.42.6 Shoe (Plain)
Digitally signed by ARTI
12.43 Providing and fixing unplastisized PVC pipe clip approved design to unplastisized
PVC rain water pipes by meanes of 50x50x50 mm hard wood plugs,screwed with
M.S screws of required length,including cutting brick and fixing in cement morter
1:4(1 cement:4 coarse sand) and making good the wall etc complete.
SUB TOTAL( RAIN WATER PIPING) 50007.07
SEWERAGE & DRAINAGE
19.1 Providing,laying and jointing glazed stoneware pipes class SP-1 with stiff mixture
of cement mortar in the proportion of 1:1 (1 cement: 1 fine sand) including
testing of joints etc. complete :
19.2 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse
sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes
including bed concrete as per standard design :
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10
19.3 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes
including bed concrete as per standard design :
19.3.2 150 mm diameter S.W. pipe Mtr 90 743.10 66879.00
Digitally signed by ARTI
19.4 Providing and fixing square-mouth S.W. gully trap class SP-1
complete with C.I. grating brick masonry chamber with water tight
C.I. cover with frame of 300 x300 mm size (inside) the weight of
cover to be not less than 4.50 kg and frame to be not less than 2.70kg as per
standard design:
19.4.1 100x100mm size 'P' type
19.4.1.1 With common burnt clay F.P.S. (non modular)
bricks of class designation 7.5
19.6 Providing and laying non-pressure NP2 class (light duty) R.C.C.pipes with collars
jointed with stiff mixture of cement mortar in theproportion of 1:2 (1 cement : 2
fine sand) including testing of joints etc. complete :
19.7 Constructing brick masonry manhole in cement mortar 1:4 ( 1
cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1
cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size),
foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone
aggregate 40 mm nominal size), inside plastering 12 mm thick with cement
mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement
and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4
graded stone aggregate 20 mm nominal size) finished with a floating coat of neat
cement complete as per standard design :
19.7.1 Inside size 90x80 cm and 45 cm deep including C.I. coverwith frame (light duty)
455x610 mm internal dimensions,total weight of cover and frame to be not less
than 38 kg(weight of cover 23 kg and weight of frame 15 kg) :
19.7.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 7 12770.55 89393.85
Digitally signed by ARTI
19.8 Extra for depth for manholes :
19.8.1 Size 90x80 cm
19.8.1.1 With common burnt clay F .P .S. (non modular) Mtr 1 8825.40 8825.40
19.9 Constructing brick masonry circular type manhole 0.91 m internaldia at bottom
and 0.56m dia at top in cement mortar 1:4 (1 cement: 4 coarse sand), inside
cement plaster 12 mm thick with cementmortar 1:3 (1 cement : 3 coarse sand)
finished with a floating coatof neat cement, foundation concrete 1:3:6 mix (1
cement : 3 coarsesand : 6 graded stone aggregate 40 mm nominal size), and
makingnecessary channel in cement concrete 1:2:4 (1 cement : 2 coarsesand : 4
graded stone aggregate 20 mm nominal size) finishedwith a floating coat of neat
cement, all complete as per standard
19.9.1 0.91 m deep with S.F.R.C. cover and frame (heavy duty,
HD-20 grade designation) 560 mm internal diameter conforming
to I.S. 12592, total weight of cover and frame to be
not less than 182 kg., fixed in cement concrete 1:2:4 (1
cement : 2 coarse sand : 4 graded stone aggregate 20 mm
nominal size) including centering, shuttering all complete.
(Excavation, foot rests and 12mm thick cement plaster at
the external surface shall be paid for separately) :
19.9.1.1 With common burnt clay F.P.S. (non modular)
bricks of class designation 7.5
Digitally signed by ARTI
19.16 Providing orange colour safety foot rest of minimum 6 mm thickplastic
encapsulated as per IS : 10910, on 12 mm dia steel barconforming to IS: 1786,
having minimum cross section as 23 mmx25mm and over all minimum length 263
mm and width as 165 mm withminimum 112 mm space between protruded legs
having 2 mm treadon top surface by ribbing or chequering besides necessary
andadequate anchoring projections on tail length on 138 mm as perstandard
drawing and suitable to with stand the bend test and chemical resistance test as
per specifications and having manufacture's permanent identification mark to be
visible even after fixing, including fixing in manholes with 30x20x15 cm cement
concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm
nominal size) complete as per design.
19.21 Making connection of drain or sewer line with existing manhole
including breaking into and making good the walls, floors with cementconcrete
1:2:4 mix (1 cement : 2 coarse sand : 4 graded stoneaggregate 20 mm nominal
size) cement plastered on both sideswith cement mortar 1:3 (1 cement : 3 coarse
sand), finished with afloating coat of neat cement and making necessary channels
forthe drain etc. complete :
19.21.1 For pipes 100 to 250 mm diameter Each 1 810.45 810.45
Providing sand cast iron drop connection externally for 60 cm drop
from branch sewer line to main sewer manhole including inspectionand cleaning
eye with chain and lid, sand cast iron drop pipe andbend encased all-round with
cement concrete 1:5:10 (1 cement :5 fine sand : 10 graded stone aggregate 40
mm nominal size) withall centering and shuttering required, cutting holes in walls
19.22 andmaking good with brick work in cement mortar 1:4 (1 cement : 4coarse sand)
plastered with cement mortar 1:3 (1 cement : 3coarse sand) on inside of the
manhole wall, lead caulked jointsbetween sand cast iron pipes and fittings, stiff
cement mortar 1:1(1 cement : 1 fine sand) joints between sand cast iron tee
andS.W. pipe, making required channels complete as per standarddesign and
specifications :
Digitally signed by ARTI
19.22.2 150 mm dia sand cast iron drop connection Each 3 16577.80 49733.40
19.27 Constructing brick masonry road gully chamber 50x45x60 cm with bricks in
cement mortar 1:4 (1 cement : 4 coarse sand) including
500x450 mm pre-cast R.C.C. horizontal grating with frame complete
as per standard design :
19.27.1 With common burnt clay F.P.S. (non modular) bricks of class
designation 7.5
SUB TOTAL( SEWERAGE & DRAINAGE) 532437.10
2.6 Earth work in excavation by mechanical means (Hydraulic excavator)/manual
means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on
plan) including getting out and disposal of excavated earth lead upto 50 m and lift
upto 1.5 m, as directed by Engineer-in-charge.
2.6.1 All kind of soil Cum 28 177.50 4884.66
2.25 Filling available excavated earth (excluding rock) in trenches, plinth, sides of
foundations etc. in layers not exceeding 20cm in depth, consolidating each Cum 15 196.00 2892.88
deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m
2.10 Excavating trenches of required width for pipes, cables, etc includingexcavation
for sockets, and dressing of sides, ramming of bottoms,depth upto 1.5 m,
including getting out the excavated soil, and thenreturning the soil as required, in
layers not exceeding 20 cm in depth,including consolidating each deposited layer
by ramming, watering,etc. and disposing of surplus excavated soil as directed,
within a leadof 50 m :
2.10.1 All kinds of soil
Digitally signed by ARTI
2.10.1.2 Pipes, cables etc. exceeding 80mm dia but not exceeding 300mm dia Mtr 252 352.15 88741.80
SUB TOTAL( EARTH WORK)
Digitally signed by ARTI
NAME OF THE PROJECT: CONSTRUCTION OF PROPOSED NEW BUILDING BLOCKS (INTERNATIONAL GUEST HOUSE, CANTEEN COMPLEX,
MARKET AND BANK BUILDING, DISPENSARY AND EXTERNAL DEVELOPMENT WORKS FOR RLBCAU, DATIA.
ESTIMATE - CANTEEN AND ACTIVITY HALL (FIRE FIGHTING ITEMS)
Item Code RATE AMOUNT
DESCRIPTION OF ITEMS QTY UNIT RATE INCLUDING
GST FACTOR MR DSR-2022(E&M) MR
SUB HEAD - A : PUMPS & EQUIPMENTS
18.4 Supplying , Installation , Testing and Commissioning of Electric Driven Terrace
Pump Suitable for Automatic operation and Consisting of Following Complete in
all Respect as Required ( Terrace Fire Pump )
a) Horizontal Type Multistage , Centrifugal Pump of Cast Iron Body and Bronze
Impeller with Stainless Steel Shaft Mechanical Seal Conforming to IS : 1520
b) Suitable HP Squirrel cage Induction motor , TEFC , synchronous speed 1500 RPM ,
Suitable for operation on 415 Volts 3 Phase 50 Hz AC Supply with IP 68 protection
for enclosure Horizontal Foot Mounted type with class F insulation Conforming to
IS : 325 with Energy Efficiency class IE-3
c) MS Fabricated Common Base Plate Coupling , Coupling Guard Foundation bolts
etc as Required
d) Suitable Cement Concrete Foundation duly Plastered with anti vibration Pads
The Head of the Pump is Selected in a manner so as to give a minimum 3.5
kg/sqcm pressure at the highest / farthest point
18.20 Supplying and Fixing Air Vessel made of 450 mm dia 8 mm thick ms sheet 2000
mm in height with air release valve on top and flanged connection to riser drain
arrangement with 25 mm dia gunmetal wheel valve with required accessories
pressure gauge and painting with synthetic enamel paint of approved shade as
TOTAL CARRIED TO SUMMARY SHEET FOR SUB HEAD A 1,11,058.50 -
Digitally signed by ARTI
NAME OF THE PROJECT: CONSTRUCTION OF PROPOSED NEW BUILDING BLOCKS (INTERNATIONAL GUEST HOUSE, CANTEEN COMPLEX,
MARKET AND BANK BUILDING, DISPENSARY AND EXTERNAL DEVELOPMENT WORKS FOR RLBCAU, DATIA.
ESTIMATE - CANTEEN AND ACTIVITY HALL (FIRE FIGHTING ITEMS)
Item Code RATE AMOUNT
DESCRIPTION OF ITEMS QTY UNIT RATE INCLUDING
GST FACTOR MR DSR-2022(E&M) MR
PIPING, HYDRANT , AND ACCESSORIES SYSTEM
18.7 Providing Laying Testing and Commissioning of C class Heavy duty MS Pipe
Conforming to IS : 1239 / 3589 including Fittings like elbows , tees , flanges ,
tapers , nuts , bolts , gaskets etc in ground including welding excavation and
Providing cement concrete blocks as supports anticorrosive treatment with
coaltar / asphalts tape as per IS :10221 refilling the trench etc of following sizes
complete as required .
18.11 Supplying Fixing Testing and Commissioning of butterfly valve of PN 1.6 Rating
with Bronze Gunmetal Sheet duly ISI marked complete with nuts , bolts , washers ,
gaskets conforming to IS : 13095 of following sizes as required .
18.12 Supplying, fixing, testing & commissioning of double flanged sluice valve of rating
PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked complete with
nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as
18.14 Providing Installation Testing and Commissioning of Non Return Valve of following
sizes conforming to IS : 5312 complete with rubber gasket , GI Bolts , Nuts ,
washers etc as required .
18.15 Providing Installation Testing and Commissioning of Stainless Steel Y Strainer
fabricated out of 1.6 mm thick stainless steel , Grade 304 , Sheet with 3 mm dia
holes with stainless steel flange .
Digitally signed by ARTI
NAME OF THE PROJECT: CONSTRUCTION OF PROPOSED NEW BUILDING BLOCKS (INTERNATIONAL GUEST HOUSE, CANTEEN COMPLEX,
MARKET AND BANK BUILDING, DISPENSARY AND EXTERNAL DEVELOPMENT WORKS FOR RLBCAU, DATIA.
ESTIMATE - CANTEEN AND ACTIVITY HALL (FIRE FIGHTING ITEMS)
Item Code RATE AMOUNT
DESCRIPTION OF ITEMS QTY UNIT RATE INCLUDING
GST FACTOR MR DSR-2022(E&M) MR
18.9 Supplying and Fixing Single Headed Internal Hydrant Valve with instantaneous
gunmetal material coupling of 63 mm dia with cast iron wheel ISI marked
conforming to IS : 5290 ( Type A ) with blank Gunmetal material cap and chain as
18.9.1 Single Headed Gunmetal Material 2 Set 7,646.00 8,129.99 16,259.98
18.13 Supplying and Fixing orifice plate made out of 6 mm thick stainless steel ( Grade
304 ) with orifice of required size to be fitted between flange and landing valve of
external and internal hydrants to reduce pressure at the outlet to the level of 3.5
kg / sqcm complete as required . 2 Each 1,321.00 1,404.62 2,809.24
18.16 Supplying and Fixing 63 mm dia 15 m Long RRL Hose pipe with 63 mm dia male
and female coupling duly bound with GI wire , rivet etc . Conforming to IS : 636 (
Type A ) as Required .
18.17 Supplying and Fixing First aid hose reel with MS Construction Spray painted in
Post office red conforming to IS : 884 complete with the following as required
20 mm nominal internal dia water hose thermoplastic ( Textile Reinforced ) Type -
2 as per IS : 12585
20 mm nominal internal dia gunmetal globe valve and nozzle
Drum and Brackets for fixing the equipments on wall
Connections from Riser with 25 mm dia stop gunmetal valve and MS Pipe and
Digitally signed by ARTI
NAME OF THE PROJECT: CONSTRUCTION OF PROPOSED NEW BUILDING BLOCKS (INTERNATIONAL GUEST HOUSE, CANTEEN COMPLEX,
MARKET AND BANK BUILDING, DISPENSARY AND EXTERNAL DEVELOPMENT WORKS FOR RLBCAU, DATIA.
ESTIMATE - CANTEEN AND ACTIVITY HALL (FIRE FIGHTING ITEMS)
Item Code RATE AMOUNT
DESCRIPTION OF ITEMS QTY UNIT RATE INCLUDING
GST FACTOR MR DSR-2022(E&M) MR
18.18 Supplying and Fixing 63 mm dia Gunmetal Short Branch Pipe with 20 mm nominal
internal diameter size nozzle conforming to IS : 903 suitable for instantaneous
connection to interconnect hose pipe coupling as required .
18.22 Providing and Fixing of Pressure Switch in MS Pipe Line including connection etc
NON-SCHEDULED ITEMS
NS-1 Providing and fixing of Fire Hose Cabinet size not less than 2.1 x 1.2 x 0.90 mtr
made out of M.S. sheet not less than 1.5 mm thick having central opening and 4
mm thick glazed glass doors (Two nos.) suitably marked on the outside 'with the
letters "FIRE HOSE" including necessary locking arrangement and painting in PO
red colour suitable to accommodate, internal hydrant valve, 2 nos 15 mtr long
Hose pipe, branch pipe, nozzle and fire man's axe. It shall be fixed inside the FHC
Cabinet Complete as required .
NS-2 Providing and fixing standard firemans axe with heavy rubber handle. 2 Each 1285.00 2,570.00
NS-3 Providing and fixing dial type pressure gauge with isolation cock and copper
pipe on main header Dial diameter 100 mm celebration 0-16 / sq. cm.
Digitally signed by ARTI
NAME OF THE PROJECT: CONSTRUCTION OF PROPOSED NEW BUILDING BLOCKS (INTERNATIONAL GUEST HOUSE, CANTEEN COMPLEX,
MARKET AND BANK BUILDING, DISPENSARY AND EXTERNAL DEVELOPMENT WORKS FOR RLBCAU, DATIA.
ESTIMATE - CANTEEN AND ACTIVITY HALL (FIRE FIGHTING ITEMS)
Item Code RATE AMOUNT
DESCRIPTION OF ITEMS QTY UNIT RATE INCLUDING
GST FACTOR MR DSR-2022(E&M) MR
NS-4 Co2 type Fire Extinguisher 4.5 Kgs. Capacity, made from brand new seamless
cylinder, as per IS: 7285 and CCE approval, fitted with Discharge hose and horn
and wheel type valve with initial Charge as per IS: 15683:2018 specification,
bearing ISI Mark & EIL approved.
NS-5 ABC Stored Pressure type Fire Extinguisher 6 Kgs. capacity bearing ISI Mark for
Fighting ABC Class of Fire. The Extinguisher will be Manufactured Strictly as per
BIS: 15683:2018 bearing ISI. mark. MAP 40% a) In built NRV on valve to cross
check internal pressure.
b) Operating temperature marking on valve.
c) Automatic safety release valve.
d) Non Returnable Valve
NS-6 Water Stored Pressure type Fire Extinguisher, 9 Litre’s capacity Fire
Extinguishers.The Extinguisher will be Manufactured Strictly as per BIS:
15683:2018 bearing ISI. mark.
TOTAL CARRIED TO SUMMARY SHEET FOR SUB HEAD B 1,99,984.40 1,31,838.38
Digitally signed by ARTI
NBCC (INDIA) LTD
NAME OF THE PROJECT: CONSTRUCTION OF PROPOSED NEW BUILDING BLOCKS (INTERNATIONAL GUEST HOUSE, CANTEEN COMPLEX,
MARKET AND BANK BUILDING, DISPENSARY AND EXTERNAL DEVELOPMENT WORKS FOR RLBCAU, DATIA.
ESTIMATE - MARKET COMPLEX (CIVIL ITEMS)
DSR 2023 DESCRIPTION Unit Qty Rounded Rate DSR Amount
1.0 CARRIAGE OF MATERIAL
1.1 By Mechanical Transport including loading,unloading and stacking
1.1.2 Carriage of earth
1.1.4 Carriage of excavated rock
2.6 Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over
areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including
getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by
Engineer-in-charge.
2.6.1 All kinds of soil cum 187.44 177.50 33,270.60
Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in
foundation over areas (exceeding 30cm in depth , 1.5 m in width or 10 sqm on plan),
2.7 including disposal of excavated earth, for all leads and lifts, disposed earth to be levelled
and neatly dressed.
2.8 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in
foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including
dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the
excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
2.25 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations
etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming cum 199.09 196.00 39,021.64
and watering, lead up to 50 m and lift upto 1.5 m.
Digitally signed by ARTI
DSR 2023 DESCRIPTION Unit Qty Rounded Rate DSR Amount
2.25(a) Excavating, supplying, stacking and filling of local earth (including royalty) by mechanical
transport upto a lead of 5km also including ramming and watering of the earth in layers not
exceeding 20 cm in foundation trenches, plinth, sides of foundation etc. complete for all
2.27 Supplying and filling in plinth with sand under floors, including watering, ramming,
consolidating and dressing complete.
2.34 Supplying chemical emulsion in sealed containers including delivery as specified.
2.34.1 Chlorpyriphos/Lindane Emulsifiable concentrate of 20%. Ltr. 47.30 234.75 11,103.68
2.35 Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite
2.35.2 Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25
litres per linear metre including drilling and plugging holes etc.: With Chlorpyriphos/ metre 79.19 53.45 4,232.71
Lindane E.C. 20% with 1% concentration
4.1 Providing and laying in position cement concrete of specified grade excluding the cost of
centering and shuttering - All work up to plinth level
4.1.8 1:4:8 (1 Cement : 4 coarse sand (zone-lll) derived from natural sources : 8 graded stone
aggregate 40 mm nominal size derived from natural sources)
4.3 Centering and shuttering including strutting, propping etc. and removal of form for all
4.3.1 Foundations, footings, bases of columns sqm 60.61 392.15 23,768.21
4.17 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand :
6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast
40 mm nominal size, well rammed and consolidated and grouted with fine sand, including Sqm 48.40 749.30 36,266.12
necessary excavation, levelling & dressing & finishing the top smooth.
5.1.2 Reinforced cement concrete work in beams, suspended floors, roofs having slope up to
15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and
spiral stair cases above plinth level up to floor five level, including the cost of centering, cum 15.07 9,045.75 1,36,319.45
shuttering, finishing and excluding reinforcement with 1:1.5:3 (1 cement: 1.5 coarse sand:
3 graded stone aggregate 20 mm nominal size).
5.9 Centering and shuttering including strutting, propping etc. and removal of form for all
5.9.1 Foundations, footings, bases of columns etc. for mass concrete. sqm 85.80 392.15 33,646.47
5.9.3 Suspended floors, roofs, landings, balconies and access platform. sqm 366.30 927.25 3,39,651.68
Digitally signed by ARTI
DSR 2023 DESCRIPTION Unit Qty Rounded Rate DSR Amount
5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers. Sqm 545.60 736.40 4,01,779.84
5.9.6 Columns, Pillars, Piers, Abutments, posts and Struts Sqm 201.30 961.30 1,93,509.69
5.9.16 Edges of slabs and breaks in floors and walls.
5.9.19 Weather shade, chajjas, corbels etc. including edges. sqm 10.02 951.10 9,530.02
5.22 Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position
and binding all complete upto plinth level
5.22.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. kg 8258.80 107.85 8,90,711.58
5.22 A Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in
position and binding all complete above plinth level.
5.22A.6 Thermo-Mechanically Treated bars of grade Fe-500 D or more. kg 11046.85 107.85 11,91,402.77
5.33 Providing and laying in position ready mixed or site batched design mix cement concrete
for reinforced cement concrete work; using coarse aggregate and fine aggregate derived
from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement,
admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of
concrete, to improve durability and workability without impairing strength; including
pumping of concrete to site of laying, curing, carriage
for all leads; but excluding the cost of centering, shuttering, finishing and
reinforcement as per direction of the engineer-in-charge, for the following grades of
Note: Extra cement up to 10% of the minimum specified cement content
in design mix shall be payable separately. In case the cement content in
design mix is more than 110% of the specified minimum cement content,
the contractor shall have discretion to either re-design the mix or bear the
cost of extra cement.
5.33.1 All works upto plinth level
5.33.1.1 Concrete of M25 grade with minimum cement content of 330 kg /cum cum 72.60 9,504.75 6,90,044.85
5.33.1.2 Concrete of M30 grade with minimum cement content of 350 kg /cum cum 7.70 9,655.70 74,348.89
5.33.2 All works above plinth level upto floor V level
5.33.2.1 Concrete of M25 grade with minimum cement content of 330 kg /cum cum 84.70 9,860.40 8,35,175.88
5.33.2.2 Concrete of M30 grade with minimum cement content of 350 kg /cum cum 12.10 10,011.35 1,21,137.34
5.30 Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.
5.35 Add for using extra cement in the items of design mix over and above the specified
cement content therein.
Digitally signed by ARTI
DSR 2023 DESCRIPTION Unit Qty Rounded Rate DSR Amount
6.1 Brick work with common burnt clay F.P.S. (non modular) bricks of class
designation 7.5 in foundation and plinth in:
6.1.2 Cement mortar 1:6 (1 cement : 6 coarse sand) cum 11.04 7,132.25 78,740.04
6.4 Brick work with common burnt clay F.P.S. (non modular) bricks of class
designation 7.5 in superstructure above plinth level up to floor V level in
all shapes and sizes in:
6.4.2 Cement mortar 1:6 (1 cement: 6 coarse sand) cum 49.50 9,105.95 4,50,744.53
6.44 Brick edging 7cm wide 11.4 cm deep to plinth protection with common burnt clay F.P.S.
(non modular) bricks of class designation 7.5 including grouting with cement mortar 1:4 (1 Mtr 158.40 59.45 9,416.88
cement : 4 fine sand).
6.38 Providing and laying Autoclaved Aerated concrete(AAC) blocks masonry 100 mm/ 125
mm thick with Grade-1 AAC blocks of density 551 to 650 kg/cum conforming to 1S:2185
(Part 3) in super structure above plinth level up to floor V level in cement mortar 1:4 (1
cement : 4 coarse sand ). The rate includes providing and placing in position 2 Nos 6 mm
dia M.S. bars at every third course of masonry work.
6.47 Providing and laying Autoclaved Aerated concrete(AAC) blocks masonry with 150 mm to
300 mm thick with Grade-1 AAC blocks of density 551 to 650 kg/cum conforming to
IS:2185 (Part 3) in super structure above plinth level up to floor V level with RCC band at
sill level and lintel level with approved block laying polymer modified adhesive mortar all cum 140.86 8,333.65 11,73,877.94
complete as per direction of Engineer-in-Charge. (The payment of RCC band and
reinforcement shall be made for seperately).
8.2 Providing and fixing 18 mm thick gang saw cut, mirror polished,
premoulded and prepolished, machine cut for kitchen platforms, vanity
counters, window sills, facias and similar locations of required size,
approved shade, colour and texture laid over 20 mm thick base cement
mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement,
mixed with matching pigment, epoxy touch ups, including rubbing, curing,
moulding and polishing of edges to give high gloss finish etc. complete
8.2.2 Granite stone slab of colour black, Cherry/Ruby red
8.2.2.2 (b) Area of slab over 0.50 Sqm Sqm 8.25 5136.30 42,374.48
Digitally signed by ARTI
DSR 2023 DESCRIPTION Unit Qty Rounded Rate DSR Amount
8.5 Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen
platform, vanity counter and similar location in marble/ Granite/ stone work, including
necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges
8.31 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness
to be specified by the manufacturer), of approved make, in all colours, shades except
burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting,
risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 sqm 146.30 1,267.95 1,85,501.09
coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in
white cement mixed with pigment of matching shade complete.
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid
door/window/clerestory windows & desertory other Frames/Chowkhat
comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium
carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic
additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after
applying PVC solvent cement and screwed with full body threaded star headed SS screws
having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N
(Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of
26.86 elasticity 900 N/mm2 and resistance to spread of flame of Class A category with -
property of being termite/borer proof, water/moisture proof and fire retardant and
fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length
complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners
shall be paid for separately).
Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth
and width of profile shall be acceptable. Variation in profile dimensions on plus side shall
be acceptable but no extra payment on this account shall be made.
Digitally signed by ARTI
DSR 2023 DESCRIPTION Unit Qty Rounded Rate DSR Amount
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid
plain flush door shutter of required size comprising of virgin polymer of K value 58-60
(Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice
husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms)
having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N
(Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity
26.87 850 N/mm2 and resistance to spread of flame of Class A category with property of -
being termite/borer proof, water/moisture proof and fire retardant and fixing with
stainless steel butt hinges of required size with necessary full body threaded star
headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note:
stainless steel butt hinges and necessary S.S screws shall be paid separately)
Providing and fixing bright finished brass tower bolts (barrel type) with
necessary screws etc. complete :
Providing and fixing chromium plated brass handles with necessary
screws etc. complete:
Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy
weight) with stainless steel screws etc. complete :
Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc.
complete : (copper oxidized as per IS: 1378)
Providing and fixing bright finished brass hanging type floor doo stopper with necessary 5.00
screws, etc. complete.
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of 2.00
approved quality) complete with 6 mm thick hard board ground fixed to wooden
cleats with C.P. brass screws and washers complete.
Digitally signed by ARTI
DSR 2023 DESCRIPTION Unit Qty Rounded Rate DSR Amount
9.26 Extra for cutting rebate in flush door shutters (Total area of the shutter to be measured).
9.53 Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm
diameter bolts, nuts and wooden plugs and embedding in cement concrete block
30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm
9.84 Providing and fixing aluminium extruded section body tubular type universal hydraulic door
closer (having brand logo with ISI, IS: 3564, embossed on the body, door weight upto 36
Kg. to 80 Kg. and door width from 701 mm to 1000 mm), with double speed adjustment
with necessary accessories and screws etc. complete.
9.96 Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not
less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade -
with nuts and screws etc. complete:
9.97 Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less
than grade AC 10 as per IS : 1868 ) transparent or dyed toreqired colour or shade with -
necessary screws etc.complete
9.100 Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than
grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with -
necessary screws etc. complete :
9.101 Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic
coating not less than grade AC 10 as per IS :1868) transparent or dyed to required colour
or shade with necessary screws etc. complete:
9.101.2 Twin rubber stopper Each 13.00 72.35 940.55
9.103 Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI marked, with
six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS :
1868) aluminium lever handles of approved quality with necessary screws etc. complete.
Digitally signed by ARTI
DSR 2023 DESCRIPTION Unit Qty Rounded Rate DSR Amount
9.121 Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of
cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to
receive shutter of 30 mm thickness. The laminate shall be moulded with
fire resistant grade unsaturated polyester resin and chopped mat. Door metre 35.00 570.95 19,983.25
frame laminate shall be 2 mm thick and shall be filled with suitable wooden
block in all the three legs. The frame shall be covered with fiber glass from
all sides. M.S. stay shall be provided at the bottom to steady the frame.
9.122 Providing and fixing to existing door frames.
9.122.2 30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and
wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm
thick FRP laminate all around, with suitable wooden blocks inside at required places for
fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used
as filler material throughout the hollow panel, casted monolithically with testing parameters sqm 11.91 4,488.95 53,463.39
of F.R.P. laminate conforming to table - 3 of IS: 14856, complete as per
direction of Engineer-in-charge.
9.127 Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss /
matt / suede finish with high density protective surface layer and reverse side of adhesive
bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved
10.6 Supplying and fixing rolling shutters of approved make, made of required size M.S. laths,
interlocked together through their entire length and jointed together at the end by end
locks, mounted on specially designed pipe shaft with brackets, side guides and
arrangements for inside and outside locking with push and pull operation complete, 0.00
including the cost of providing and fixing necessary 27.5 cm long wire springs
manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 -
part 1 and M.S. top cover of required thickness for rolling shutters.
10.6.1 80x1.25 mm M.S. laths with 1.25 mm thick top cover sqm 49.50 3,653.20 1,80,833.40
10.7 Providing and fixing ball bearing for rolling shutters. Each 22.00 492.35 10,831.70
10.8 Extra for providing mechanical device chain and crank operation for operating rolling
10.8.1 Exceeding 10.00 sqm and upto 16.80 sqm in the area sqm 49.50 1,281.35 63,426.83
Digitally signed by ARTI
DSR 2023 DESCRIPTION Unit Qty Rounded Rate DSR Amount
10.9 Extra for providing grilled rolling shutters manufactured out of 8 mm dia M.S. bar instead
of laths as per design approved by Engineer-in- charge, (area of grill to be measured). sqm 14.85 768.25 11,408.51
10.25 Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in
position and applying a priming coat of approved steel primer using structural steel etc. as
10.25.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works kg 770.00 172.60 1,32,902.00
10.27 Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener of
10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head,
comprising of 10 mm dia polyamide PA 6 grade sleeve, including drilling of hole in frame ,
concrete/ masonry, etc. as per direction of Engineer-in-charge.
10.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels,
plates etc., including welding, grinding, buffing, polishing and making curvature (wherever
required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c
fixing the railing with necessary accessories & stainless steel dash fasteners , stainless
steel bolts etc., of required size, on the top of the floor or the side of waist slab with kg 275.00 772.40 2,12,410.00
suitable arrangement as per approval of Engineer-incharge, (for payment purpose only
weight of stainless steel members shall be considered excluding fixing accessories such
as nuts, bolts, fasteners etc.).
10.29 Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S.
Flat 15x3 mm and nuts & bolts complete.
10.29.2 Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both
11.26 Kota stone slab flooring over 20 mm (average) thick base laid over and
jointed with grey cement slurry mixed with pigment to match the shade of
the slab, including rubbing and polishing complete with base of cement
mortar 1 : 4 (1 cement : 4 coarse sand) :
11.27 Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm
(average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement
slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing
Digitally signed by ARTI
DSR 2023 DESCRIPTION Unit Qty Rounded Rate DSR Amount
11.41A Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the
manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of
approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement
mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm
including grouting the joints with white cement and matching pigments etc. The tiles must
be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the
notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet
for placing the tiles gently and easily.
11.41A.1 Double charge vitrified tile polished finish of size
11.46 Providing and laying Vitrified tiles in different sizes (thickness to be specified by
manufacturer), with water absorption less than 0.08 % and conforming to |.S. 15622, of
approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of
cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/
sqm including grouting the joint with white cement & matching pigments etc.
11.56 Providing and laying Polished Granite stone flooring in required design and patterns, in
linear as well as curvilinear portions of the building all complete as per the architectural
drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar
1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white
cement slurry admixed with pigment of matching shade including rubbing , curing and
polishing etc. all complete as specified and as directed by the Engineer-in-Charge.
11.56.2 Polished Granite stone slab of all colour and texture except Black, Cherry/Ruby Red
12.21 Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone
aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : metre 93.78 305.15 28,616.97
3 fine sand) as per standard design : In 75x75mm deep chase
Digitally signed by ARTI
DSR 2023 DESCRIPTION Unit Qty Rounded Rate DSR Amount
12.22 Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4
(1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C.
sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 each 9.00 298.25 2,684.25
coarse sand) and a coat of neat cement, rounding the edges and making and finishing the
outlet complete.
13.1 12 mm cement plaster of mix :
13.11 18 mm cement plaster in two coats under layer 12 mm thick cement plaster
1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement
plaster 1:6 (1 cement : 6 fine sand).
13.16 6 mm cement plaster of mix :
13.37 White washing with lime to give an even shade :New work (three or more coats) Sqm. 4.40 39.05 171.82
13.45 Finishing walls with textured exterior paint of required shade :
13.45.1 New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat
of exterior primer applied @ 2.20kg/10 sqm
13.80 Providing and applying white cement based putty of average thickness 1 mm, of approved
brand and manufacturer, over the plastered wall surface to prepare the surface even and sqm 1188.00 156.05 1,85,387.40
smooth complete.
13.83 Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile
Organic Compound ) content less than 50 grams/ litre of approved brand and
manufacture, including applying additional coats wherever required to achieve even shade
13.114 Melamine polishing on wood work (one or more coat). sqm 35.20 138.10 4,861.12
ALUMINIUM WORK:
Digitally signed by ARTI
DSR 2023 DESCRIPTION Unit Qty Rounded Rate DSR Amount
21 Providing and fixing aluminium work for doors, windows, ventilators and partitions with
extruded built up standard tubular sections/ appropriate Z sections and other sections of
approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required
dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and
sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be
smooth, rust free, straight, mitred and jointed mechanically wherever required including
cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel
screws, all complete as per architectural drawings and the directions of Engineer-in-
charge. (Glazing, paneling and dash fasteners to be paid for separately) :
21.1.1 For fixed portion
21.1.1.1 Anodised aluminium (anodised transparent or dyed to required shade according to IS:
1868, Minimum anodic coating of grade AC 15)
21.1.2 For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots
and making provision for fixing of fittings wherever required including the cost of
EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)
21.1.2.1 Anodised aluminium (anodised transparent or dyed to required shade according to IS:
1868, Minimum anodic coating of grade AC 15)
21.3 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions
etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings
and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid
in basic item):
21.3.2 With float glass panes of 5.5 mm thickness (weight not less than 12.50 kg/ sqm) sqm 53.64 1,505.25 80,741.61
21.8 Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by
providing weather silicon sealant over backer rod of approved quality as per architectural
drawings and direction of Engineer-in-charge
21.8.1 Upto 5 mm depth and 5 mm width metre 167.64 96.75 16,219.17
21.15 Providing and fixing aluminium casement windows fastener of required length for
aluminium windows with necessary screws etc. complete.
21.15.1 Anodized (AC 15) aluminium each 29.00 89.40 2,592.60
Digitally signed by ARTI
DSR 2023 DESCRIPTION Unit Qty Rounded Rate DSR Amount
21.17 Providing and fixing anodised aluminium grill (anodised transparent or dyed to required
shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved
design/pattern, with approved standard section and fixed to the existing window frame with
C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to
proper opening size for fixing and operation of handles and fixing approved anodised
aluminium standard section around the opening, all complete as per requirement and
direction of Engineer-in-charge. (Only weight of grill to be measured for payment).
WATER PROOFING:
22.3 Providing and laying water proofing treatment to vertical and horizontal surfaces of
depressed portions of W.C., kitchen and the like consisting of:
(i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound
conforming to IS 2645 in recommended proportions including rounding off junction of
vertical and horizontal surface.
(ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water
proofing compound in recommended proportion including rounding off junction of vertical
and horizontal surface.
(iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of
(iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be
100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm).
22.7 Providing and laying integral cement based water proofing treatment including preparation
of surface as required for treatment of roofs, balconies, terraces etc consisting of following
(a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water
proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the
RCC slab including adjoining walls upto 300 mm height including cleaning the surface
before treatment.
(b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size
with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing
compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick
layer of cement mortar of mix 1:5 (1 cement :5 coarse sand) admixed with water proofing
compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope
and treating similarly the
adjoining walls upto 300 mm height including rounding of junctions
of walls and slabs.
Digitally signed by ARTI
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.06 MB
Drawing guest house.pdf
Tender Document
GCC 2022 with amendment 1 to 9.pdf
Tender Document
Milestone Guest House final.pdf
Tender Document
SCC.pdf
Tender Document
Soil_Inv_report.pdf
Tender Document
Technical Specs Guest huuse.pdf
Tender Document
Guest House NIT.pdf
Tender Document
List of makes-DATIA.pdf
Tender Document
IP.pdf
Tender Document
BOQ_Guest House.pdf
Tender Document
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .