C/O Souvenir Shop Near War Museum Dharamshala in Distt. Kangra HP (Deposit work )

Amount

Excavation in foundation, trenches etcetera in earth work in all kind of classification of soil such as pick work, jumper work, pick jumper work, blasting work, jumper blasting work, soft and hard blasting and doing work in saturated soil, including chiselling or wedging out rocks where blasting work is prohibited or any other mixed variety of soil, including shoring, strutting de-watering and pumping or bailing out water (surface and sub soil water) upto any depth or any quantum of water including slush which may arise during de-watering or removal of slush, lift upto any heights, stacking the excavated soil clear from the edge of excavation and then returning the stacked soil in 15cm (Fifteen centimetre) layers, when required into plinths, sides of foundation etcetera consolidating each deposited layer by ramming, watering and then disposing of all surplus excavated earth as per specification, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Providing and laying cement concrete 1:6:12 (One cement isto Six sand isto Twelve graded broken/crushed stone aggregate 40mm (Forty milimetre) nominal size mechanically mixed and curing complete excluding cost of forms work in foundation and plinth under floor, as per specification, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Random rubble masonry/polygonal rubble masonry (uncoursed/brought to courses) with hard stones of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (One cement isto Six sand isto Twelve graded crushed stone aggregate 20mm (Twenty milimetre) nominal size) at plinth level in cement mortar 1:6 (One cement isto Six sand) complete, as per specification, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimetress) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in beams cantilevers girders lintels window sills, cornices, arches corbelling including curved surfaces where ever required sides and soffits of beams haunchings cantilevers bressumers and lintels upto all depths as per specification, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Providing form work with steel plates of 3.15mm thick welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres) so as to give a fair finish including centring, shuttering, strutting and propping etc. with wooden battens and ballies for all heights of propping and centring below supporting floor to ceiling not exceeding 4 mtrs and removal of the same for in stair cases with slopping or stepped soffits excluding landings as per specification, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimetress) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetress), so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended floors roofs, landings windows sills, cornices, arches, moulding, corbelling including curved surfaces where ever required as per Architectural drawing and the like floor etc. as per specification, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 (M- twenty) mix design to obtain the minimum crushing strength of 20N/mm square with minimum cement contents of 310 kg (Three hundred ten kilogram) per cubic metres, mechanically mixed and vibrated including curing complete, excluding cost of form work and reinforcement for reinforced concrete work in Suspended floors, roofs, landings, shelves their supports balconies, beams, girder, bressumers and cantilevers including mouldings, cornices etc; as per specification, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Providing Tor steel reinforcement for reinforced cement concrete work including bending, binding and placing in position complete including cost of binding wires complete and other incidentals due for its completion for all floors as per specification, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Providing and laying 20 cm (Twenty centimetres) thick composit plain Ashlar Cyclopean stone masonry with stone facing of chisel dressed stones two line dressed in cement mortar 1:6 (One cement: Six sand) and concrete backing with cement concrete 1:3:6 (One cement isto Three sand isto Six graded stone aggregate 20mm (Twenty milimetres) nominal size) on inner face of walls including centring, shuttering and propping complete as per specification, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Second class brick work using common burnt clay building bricks upto any floor level in cement mortar 1:6 (One cement isto Six sand) first floor level as per specification, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Providing and laying cement concrete work M-20 (M-twenty) design, mix to obtain the minimum compressive strength of 20N/mm2 (Twenty newton per Square milimetres) with cement contents not less than 320 kg (Three hundred twenty kilogram) mechanically mixed and vibrated to give smooth and even surfaces including centring and shuttering etcetera but excluding the cost of reinforcement as in mouldings as in cornices, windows sills etcetera not exceeding 15cm (Fifteen centimetres) in girth as per specification, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

15mm (Fifteen milimetres) thick cement plaster in single coat on rough side of brick/concrete/stone walls for interior plastering upto all floor levels including arises internal rounded angles, chamfers and or rounded angles not exceeding 80mm (Eighty milimetre) in girth and finished even and smooth with cement mortar 1:6 (One cement isto six sand) as per specification, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

6mm (Six milimetres) thick cement plasters to ceiling with cement mortar 1:3 (One cement: Three sand) for all heights as per specification, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

15mm (Fifteen milimetres) thick cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering upto all floor levels including arises internal rounded angles, chamfers and or rounded angles not exceeding 80mm (Eighty milimetres) in girth and finished even and smooth with cement mortar 1:6 (One cement isto six sand) as per specification, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Providing wood work in frames of door, windows, clearstory windows and other frames wrought framed in fixed in position Second class deodar wood as per specification, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Providing and fixing 40mm (forty millimetre) thick second class deodar wood, panelled glazed or panelled and glazed shutters for doors windows and clerestory windows including black enamelled iron butt hinges with necessary screws, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate including of octroi, royality, malkana and all type of taxes imposed by the Government.

Providign and fixing 12 mm (twelve millimetre) thick prelaminated board both side bwp phenol bonded exterior/interior grade panalled shutters with frame of first class deodar wood for doors including bright finished/black enamelled iron butt hinges with necessary screws 40 mm ( forty millimetre ) thick frame as per specification, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Providing and fixing 40mm (Forty milimetres) thick second class deodar wood wire gauge shutters using galvanized M.S. wire gauge of IS gauge designation 85 G with wire of 0.56mm (Zero decimal five six milimetres) diameters for doors, windows and clerestory windows including bright finished /black enameled iron hinges with screws as per specification, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Providing and fixing M.S. grill of required pattern instead frames of windows and ventilators etc. with M.S. flat 20 x 5mm (twenty into five milimetre) and 8 x 8mm ( eight into eight milimetres) M.S. solid square bars with nickel plated plain hinges with screws complete as per specification, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Providing 40x3 mm ( forty into three millimetre) flat iron hold fast 40cm ( forty centimetres) Long including fixing to frame with 10mm ( ten milimetres) diameter bolts & nuts and wooden plugs and embeding in cement concrete block 30x10x15cm ( thirt into ten into fifteen centimetres) 1:3:6 ( 1 cement isto 3 sand isto 6 graded stone aggregate 20mm ( twenty milimetre) nominal size as per specification, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including of octroi, royality, malkana and all type of taxes imposed by the Government.

Providing and fixing 150x10mm (One hundred fifty into Ten milimetres) aluminium Pilot/sheel or equivalent anodized transparent or dyed to required colour and shade with necessary screws etc.Tower bolts (Barrel type) as per specification, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Providing and fixing 125mm (One hundred twenty five milimetres) aluminium Pilot/sheel or equivalent anodized transparent or dyed to required colour and shade and of approved make with necessary screws etc. handles with the necessary screws etc. complete.as per specification, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Providing and fixing 250x16 mm ( two hundred fifty into sixteen milimetres) oxidized M.S. sliding door bolts with nuts and screws etc. complete.as per specification, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Providing and Laying 10mm (Ten milimetres) thick anti skid water proof stain and impect resistent heavy duty vetrified tiles of Orient/ Bell / Rak / Johnson 600x600mmx10mm (six hundred into six hundred into ten milimetres) manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm (twelve milimetres) thick cement mortar 1:3 (1 cement : 3 sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete. Above Plinth Level to all floor level as per specification, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Providing and laying 20mm (twenty millimetres) thick cobbel stone flooring of size 100mm x100mm (one hundred into one hundred millimetre) on 20mm (twenty millimetre) average thick base of cement mortar 1:4 (one cement isto four sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of stones including rubbing and granite polish finish complete. as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Providing and fixing cement concrete interlocking paver tiles, vibro compacted upto M-Providing and laying heavy duty precast cement concrete 40mm (forty milimetres) thick inter locking paver blocks vibro compacted upto M-50 (M-Fifty) grade including border or kurb block Grey or coloured over sub-base of concrete withn 25mm (Twenty five milimetres) thick average thickness of cement mortar 1:4 (One cement : Four sand) laid over and jointed with neat cement slurry mixed with pigment to match the shade of blocks including curing rubbing and polishing complete (sub-base concrete floor to be paid for separately) as per specification, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including of octroi, royality, malkana and all type of taxes imposed by the Government.

Providing and fixing 19mm (Nineteen milimetres) thick water proof commercial board Parker or its equivalent with hard wood edging in shelves/box for cup-board butt joints and fixing with nails and screws etc; complete and all cut portions of the board shall have 6mm (Six millimetres) thick hard wood adging within all leads, lifts of materials and other incidentals, as per drawing & design and as directed by the Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 19mm (Nineteen milimetres) thick water proof termite resistant commercial board Parker or its equivalent shutter with hard wood edging and all cut portions of the shutter have Six millimetres and twelve millimetres thick hard wood edging for cup board fixing with nickel plated piano hinges within all leads, lifts of materials and other. Incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing first class deodar wood square edges cover fillets (beading) 19mmx6mm ( nineteen milimetres into six milimetres) section including mitring at junctions with wood screws and nails complete as per specification, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Providing and fixing 1.00mm ( one decimal zero zero milimetre) thickness coloured or plain lamination sheet (sunmica) on boards/ply wood sheets with approved adhesive and nails etc complete as per specification, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Providing and fixing 150mm ( one hundred fifty milimetre) thick M.S. single acting spring hinges bright finished with necessary screws etc. complete, as per specification, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Providing and fixing bright finished brass ball catcher 10 mm ( one milimetres ) dia as per specification, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Providing and fixing 50mm ( fifty milimetres) bright finished brass cup board or ward robe knob as per specification, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Providing and fixing 100mm (one hundred millimetres) bright finished brass door stoper with rubber cushion screws etc to suit shutter thickness complete as per specification, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Providing and fixing stainless steel knock down railing of KICH AISI Grade 316 (Three hundred sixteen) OF 38mm (Thirty eight millimetres) diametres hand rail fixed on 10x50mm (Ten into Fifty millimetres) SS flats baluster (design, code DT 53-2-163) (Fifty three-two-one hundred sixty three) placed at 1200mm (One thousand two hundred millimetres) centre to centre along with 3(Three) numbers at the rate of 16mm (Sixteen millimetres) mid rails connected at the side of balustered with fixture. The balustered would be fixed on the floor with casted based plate of minimum 6mm (Six millimetres) thickness. Base plates shall be consealed with suitable S.S.316 (Three hundred sixteen) GRADE cover cap. Railing height to be taken at the rate of 85cm (Eighty five centimetres) from floor level as per specification, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including of octroi, royality, malkana and all type of taxes imposed by the Government.

Applying Birla / J.K white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete as per specification, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Wall painting (two coats) with Premium emulsion paint of Asian / Dulux /Nerolac paints approved brand and manufacture for interior grade on undecorated concrete/stone/plastered wall surfaces to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty a required for metling the surface. as per specification, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Finishing wall with Apex weather proof exterior grade emulsion of Asian Paints / Exterior Emulsion of Nerolac Suraksha paint as per approved shade approved design (Apexultima) or its equarlied on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete as per specification, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Applying priming coat over new wood and wood based surfaces after and including prepering the surface by thoroughly cleaning oil,grease,dirt and other foreign matter) sand papering and knotting with ready mixed paint brushing wood primer pink as per specification, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Painting two coats (excluding coat) on new wood and wood based surface with enamel paint to give an even shade including cleaning the surface of dirt,dust and other foreign matter,sand papering & stoping as per specification, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Providing and fixing 0.60mm (Zero decimal Six Zero milimetres) thick prepainted steel sheet ISI marked - Z 120 of tata / sail / reliance / jindal in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating to back coat of polyster of 5 (five) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks,bolts and nuts 6mm (Six milimetres) diametres with prepainted limpet and rubber washers complete with all accessories as required as per specification, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Steel work welded in built up sections trusses and framed work in beams, joists channels, angles, tees flat with connecting plates or angles, cleat etcetera in grating, framed gaurd bars, railing, brackets, frame of ceiling and similer works and the like in building including cutting, fixing, hoisting and; placing in position complete and applying a coat of red lead paint complete as per H.P.P.W.D specifications, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

PARDEEP KUMAR

Munish Kumar