Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.5 LAccepted-AOC | ₹1.5 L | L1 | Accepted-AOC Due to lowest rate |
| 2 | L2₹1.6 L+₹7,242.20 (4.82%)Rejected-Finance | ₹1.6 L+₹7,242.20 (4.82%) | L2 | Rejected-Finance Due to highest rate |
| 3 | L3₹1.6 L+₹11,745.80 (7.82%)Rejected-Finance | ₹1.6 L+₹11,745.80 (7.82%) | L3 | Rejected-Finance Due to highest rate |
| Sl No | Description | Qty | Unit | Jitender Dhiman L1 | Onkar Singh L3 | SHAMSHER SINGH L2 |
|---|---|---|---|---|---|---|
| 1.00 | Excavation in foundation trenches etc. in earth work in all kinds of soil such as pick work, jumper work, blasting work soft /hard rock, chiesling soft /hard rock where blasting is prohibited, slushy, daldal and saturated soil I/c pumping or bailling out water with in all heights stacking the excavated soil with 15cm layer when required into plinth ,sides of foundations etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus earth as per direction of Engineer-in-Charge with in all leads and lifts . | 59.72 | Cum | 270 ₹16,124.4 Lowest | 285 ₹17,020.2 | 280 ₹16,721.6 |
| 2.00 | Laying jointing and testing of bevlled ended G.I. pipe (M-Class) various dia table-5 with circumfernital butt welded joints every two joints (94%) by electrical are welding thincless shall be equal to pipe wall thinckes)and testing of G.I. pipe of following dia cinfirming to ISI 1239-1990 (part-III) having wall thinckess as specfic below capable of with standing required test pressure including manufacturing and fabrication of reducers/tapers all short pieces etc. as per site requirement made from parent tubes the laying of pipe shall also providing MS flanged of required table including welding of flanges of every third pipe (6%) duly welded including nuts. complete within all leads and lifts. 65mm | 325 | Rmts. | 90 ₹29,250 Lowest | 97 ₹31,525 | 95 ₹30,875 |
| 3.00 | Providing, fixing, MS flange pairs confirming to IS-6392-1971 (Latest with upto date ammendments) of class (Table 5) having following dia specified welding both sides of flanges according to relevant standereds i/c nuts bolts and rubbur sheet washer confirming to IS 1367-1981 and carriage of material with in all leads and lifts. 65mm Dia | 5 | Pair | 800 ₹4,000 Lowest | 860 ₹4,300 | 850 ₹4,250 |
| 4.00 | Laying, jointing & testing in trenches of Galvanised mild steel tube (L-Class) of following diameter including tube fittings complete (earth work to be measured and paid for separately) including testing of joints,within all leads and lifts . 40 mm Dia | 90 | Rmts. | 30 ₹2,700 Lowest | 37 ₹3,330 | 35 ₹3,150 |
| 4.01 | 32 mm Dia | 100 | Rmts. | 29 ₹2,900 Lowest | 35 ₹3,500 | 32 ₹3,200 |
| 4.02 | 25 mm Dia | 90 | Rmts. | 25 ₹2,250 Lowest | 28 ₹2,520 | 27 ₹2,430 |
| 5.00 | Welding of leakage joints with two layers at various places and various dia including carriage of welding set and generator set at site requiremeent as per direction of but welding to make the joint leak proof with electric welding and generator set at site complete in all respect. 65mm dia | 5 | Nos. | 275 ₹1,375 Lowest | 290 ₹1,450 | 285 ₹1,425 |
| 6.00 | Providing, fixing, CI sluice valve various dia Kirloskar/Kartar/KSB/Bir/ Leader PN 1.0 of various dia , including flange as directed by Engineer - in - Charge complete within all leads and lifts. 65 mm dia | 2 | Nos. | 6,000 ₹12,000 Lowest | 6,200 ₹12,400 | 6,100 ₹12,200 |
| 7.00 | Providing and Supply of Peet valve/Gate Valve ISI marked (heavy duty) superior quality of various dia in complete within all leads and lifts.50 mm dia | 18 | Nos. | 900 ₹16,200 Lowest | 980 ₹17,640 | 950 ₹17,100 |
| 7.01 | 40 mm dia | 18 | Nos. | 700 ₹12,600 Lowest | 770 ₹13,860 | 750 ₹13,500 |
Tender Value
₹1.6 L
EMD Value
₹3,206
Closing Date
20 Jul 2026, 11:00 amClosed
Executive Engineer
Jal Shakti Division Shahpur
Restoration of rain Damages of LWSS Kalroo Chakban in Tehsil Shahpur Distt Kangra, (HP) (Under PDNA).
2026_HPIPH_138530_1
SHP/KNG15-754/EA-I/NIT/2026- 3200-3249 dt 08/07/2026
Open Tender
Civil Works
Item Rate
60 days
Manai
Please refer Tender documents.
6 documents required · 6 mandatory
₹350
Executive Engineer
₹3,206
1 Sept 2026
9 Jul 2026
20 Jul 2026
9 Jul 2026
20 Jul 2026
9 Jul 2026
9 Jul 2026 - 20 Jul 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Excavation in foundation trenches etc. in earth work in all kinds of soil such as pick work, jumper work, blasting work soft /hard rock, chiesling soft /hard rock where blasting is prohibited, slushy, daldal and saturated soil I/c pumping or bailling out water with in all heights stacking the excavated soil with 15cm layer when required into plinth ,sides of foundations etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus earth as per direction of Engineer-in-Charge with in all leads and lifts . | 59.72 | Cum | - | - |
| 2 | Laying jointing and testing of bevlled ended G.I. pipe (M-Class) various dia table-5 with circumfernital butt welded joints every two joints (94%) by electrical are welding thincless shall be equal to pipe wall thinckes)and testing of G.I. pipe of following dia cinfirming to ISI 1239-1990 (part-III) having wall thinckess as specfic below capable of with standing required test pressure including manufacturing and fabrication of reducers/tapers all short pieces etc. as per site requirement made from parent tubes the laying of pipe shall also providing MS flanged of required table including welding of flanges of every third pipe (6%) duly welded including nuts. complete within all leads and lifts. 65mm | 325 | Rmts. | - | - |
| 3 | Providing, fixing, MS flange pairs confirming to IS-6392-1971 (Latest with upto date ammendments) of class (Table 5) having following dia specified welding both sides of flanges according to relevant standereds i/c nuts bolts and rubbur sheet washer confirming to IS 1367-1981 and carriage of material with in all leads and lifts. 65mm Dia | 5 | Pair | - | - |
| 4 | Laying, jointing & testing in trenches of Galvanised mild steel tube (L-Class) of following diameter including tube fittings complete (earth work to be measured and paid for separately) including testing of joints,within all leads and lifts . 40 mm Dia | 90 | Rmts. | - | - |
| 4.01 | 32 mm Dia | 100 | Rmts. | - | - |
| 4.02 | 25 mm Dia | 90 | Rmts. | - | - |
| 5 | Welding of leakage joints with two layers at various places and various dia including carriage of welding set and generator set at site requiremeent as per direction of but welding to make the joint leak proof with electric welding and generator set at site complete in all respect. 65mm dia | 5 | Nos. | - | - |
| 6 | Providing, fixing, CI sluice valve various dia Kirloskar/Kartar/KSB/Bir/ Leader PN 1.0 of various dia , including flange as directed by Engineer - in - Charge complete within all leads and lifts. 65 mm dia | 2 | Nos. | - | - |
| 7 | Providing and Supply of Peet valve/Gate Valve ISI marked (heavy duty) superior quality of various dia in complete within all leads and lifts.50 mm dia | 18 | Nos. | - | - |
| 7.01 | 40 mm dia | 18 | Nos. | - | - |
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.11 MB
Form6and8.pdf
Tender Documents • 0.80 MB
Termsandconditions.pdf
Tender Documents • 0.08 MB
BOQ_205214.xls
BOQ • 0.28 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .