PROVN OF WIDENING OF THE PRE-EXISTING MAIN RD AND CONTR OF CHAIN LINK SECURITY FENCE WITH ADEQUATE NUMBER OF IRON POLES FROM MAIN GATE OF HQ 3 ELINT SUB GP TO JODHPUR JAISALMER HIGHWAY AT JAISALMER MIL STN.

Amount

M & L for Site Clearance in soft/loose soil

M & L for Rolling and consolidating formation surface with 8 to 12 tonne power roller, including filling in soft spots depression etc which occur during rolling (for portion coming in cutting/ original ground only) to required camber and gradient etc including watering before or during rolling complete all as specified.

M & L for Quarried rubble stone or broken nullah boulders, in large pieces for soling/subbase of road, etc. surface formed, rolled and consolidated to required gradient and camber with 8 to 12 tonne power roller complete all as specified

M & L for 100mm thick Moorum/red bajri filling spread, rolled and consolidated to gradient and camber required

M &L for 200mm thick (spread thickness) soling (or sub base) with broken boulders or quarried stones (granite or trap or basalt stones ) of size rang 100 mm to 150 mm, deposited, spread, levelled in one layer, interstices filled, surface formed, rolled and consolidated to required gradient and camber with 8 to 12 tonne power roller complete all as specified

M & L for granular base of WMM as per M.O.R T&H specifications as specified 150mm thickness (in 02 equal layers and each layer of 75 mm thick to be compacted separately) in layer including premixing, placing with paver and compaction with roller till 98% dry density complete.

M & L Preparing un surfaced water mix macadam (WMM) surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc, and applying evenly a priming/tack (VG-10 using meachnical spayer)coat with bituminous primer @ 10 kg per 10 Sqm, using paving bitumen, complete all as specified.

M&L for Bituminous Asphaltic semi dense concrete 40 mm consolidated thickness with 5.50% (Paving bitumenous VG-30 grade)binder content by weight of total mix, rolled with 8 to 10 tonne power roller and compacted to required camber and gradient complete all as specified and directed by Engr-in-charge.

M & L for Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area exc 400 sqm Exc 50 mm and n exc 100 mm deep

M& L for Appying evenly a priming/tack coat with bitumineous primer VG-10 @ 10 kg per 10 sqm of bitumen by mechanical sprayer ,complete all as specified.

M& L for Premix Bituminous macadam of paving bitumen with binder content of 4% by weight of total mix, any penetration laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less)

M&L for Bituminous premixed asphaltic semi-dense concrete 30mm thick (consolidated thickness) with 5.5% binder (Paving bitumenous VG-30 Grd) content by weight of total mix and applying evenly a priming tack coat of bitumen VG-10 grade @ 5Kg/10 Sqm by mechanical sprayer over bituminous macadem rolled with 8 to 10 tonne power roller and compacted to required camber and gradient complete all as specified and directed by Engr-in-charge.

S & F in repairs, Solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/0.30 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. all as specified and directed

S & F in repair, metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1, complete all as specified and directed.

M &L Squared rubble walling Jodhpur type, brought upto courses, well bonded, bedded and solidly hearted, built in CM 1:6, complete all as specified and directed

M & L for one coat of Painting lines, dashes, arrows, letters, etc. on roads pavements and the like n exc 10cm wide with road marking paint, white or golden yellow as directed by Engr-in-Charge . Note :- Road marking paint work to be carried out as per IRC pattern with thermo plastic paint of approved make and mix with 8% mica sign applicator machine. No extra cost is admissible for the same.

Excavating in post holes (or similar holes) each n exc 0.50 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in Soft disintegrated rock, complete all as specified.

M & L PCC 1:2:4 type B2 using 40mm graded aggregate in foundations, filling and mass concrete, post holes, complete all as specified.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails straining bolts, etc including provision of binding wire, complete all as specified & directed by Engr-in-charge

Supply only chain link MS galvanised fencing, any size or type complete all as specified and directed by Engr-in-charge. NOTE :- Fixing included under item No.19 above.

S & F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured)

M&L Rolled mild steel in Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) of Fe 410-W (Gde E- 250) quality A, complete all as specified.

S & F Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165, complete all as specified.

M&L Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer.

M & L Mild steel Round bars Fe-410-W (Gde- E-250) quality-A or Fe 290 (Gde -E-165) of 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified.

M/S MAYA CONSTRUCTION COMPANY

m/s jogaram sujaram