Supply Installation Testing and Commissioning of Infrastructure Works Loss Reduction on turnkey basis under Revamped Reforms Linked Results Based Distribution Sector Scheme PACKAGE-I RDSS EDC KASHIPUR

Amount

New 33 KV Underground Cable

33 KV UG XLPE 3x400 Sq mm Single Ckt.

SINGLE POLE STRUCTURE AS PER Annexure- B 7

Steel Tubular Poles 11 m long (STP 11.0 M, 410 MPa , SP-55) as per IS 2713 (Parts 1 to 3): 1980 (Bottom Portion hot dip galvanized) with MS Plate (300ɸx6)

33 kV top channel 125x65x6mm 1.8 mtr. Long with all fixing arrngement, PP, Clamp, bolts & nuts all galvanized

33 kV Polymeric Pin Insulator complete

33 kV Danger board with GI clamp Bolts & Nuts.

Anti-Climbing Device (2.5mm dia (12SWG) galvanized barbed wire 3.5 kg per pole) with 2 No. clamp made of 50x8 mm strip with Nuts, Bolts & Warshers all galvanized.

Aluminum paint (Double Coat)

Red Oxide paints

Rod type earthing of pole by GI earthing rod 20ɸx2500mm with welded Clamp 40X3mm & GI wire 8 SWG (0.5 Kg) with Bolts Clamp, Washers & Nuts complete as per Drw. REC/RDSS/GEN/07 all Galvanized

Concreting of Pole (CC ratio 1:3:6) and muffing (Kicking Block) (CC ratio 1:2:4) as per scope of work in SBD

DOUBLE POLE STRUCTURE AS PER Annexure- B 8

Steel Tubular Poles 11 m long (STP 11.0 M, 410 MPa , SP-55) as per IS 2713 (Parts 1 to 3): 1980 (Bottom Portion hot dip galvanized) with MS Plate (300ɸx6)

11 KV Cross bracing Set 50x50x6mm with Belting angle of 65x65x6mm with clamps bolts & nuts all galvanized, as per SBD

33 kV top channel 125x65x6mm 3.2 mtr. Long with all fixing arrngement, PP, Clamp, bolts & nuts all galvanized.

Base Channel (125X65X6) 3.050 mtr. Long with Clamps and fittings as per SBD specs all galvanized.

33 kV Polymeric Pin Insulator complete

33 kV Danger board with GI clamp Bolts & Nuts.

Anti-Climbing Device (2.5mm dia (12SWG) galvanized barbed wire 3.5 kg per pole) with 2 No. clamp made of 50x8 mm strip with Nuts, Bolts & Warshers all galvanized.

Aluminum paint (Double Coat)

Red Oxide paints

Rod type earthing of pole by GI earthing rod 20ɸx2500mm with welded Clamp 40X3mm & GI wire 8 SWG (0.5 Kg) with Bolts Clamp, Washers & Nuts complete as per Drw. REC/RDSS/GEN/07 all Galvanized

Concreting of Pole (CC ratio 1:3:6) and muffing (Kicking Block) (CC ratio 1:2:4) as per scope of work in SBD

Stay complete (As per Annex-C-18)

33 kV Galvanized Stay Set Complete 20ϕX1800 mm. with 2 no. turn-buckles, anchor plate (300x300x8mm) as per scope of work in SBD All galvanized

Stay Wire 7/8 SWG

33kv Stay Insulator

Stay Clamp (50x8mm)with Nut, & Bolts all galvanized

Grouting with Cement Concreating ratio with 1:3:6

Supply of 33kV (E) 3cx400mm2 XLPE Underground cable (Cable outer sheet colour as per voltage level decided by UPCL)

Supply of HDPE Pipe PE 80/100 PN6 160 mm dia for HT cable (with colour coding of HDPE pipe as approved by UPCL in order to differentiate other voltage cables laid in other pipes) including long bends,short bends, couplers etc to ensure proper safety of cables & to avoid damage at ends, bends

Supply of Half Cut 200mm Cement Hume Pipe/PCC Slab

CABLE LAYING : Laying of HT cable as per the code of practice for installation and maintenance of power cables as per IS 1255 :1983 or latest amendments using conventional excavation method and Laying the cable in Half Cut 200mm Cement Hume Pipe/PCC Slab at the depth of about 1.5 meter as per site requirement & Cable dia including using cable trench pullers (with Line tension Indicator) and provision of cable Labels ,Protectin Tape (Tape Tile) etc. complete in all respect in the form original before digging. (All the required material to be provided by contractor) (As per approved drawing of UPCL )

Laying and Pulling of 33kV (E) 3cx400mm2 XLPE Underground cable (Cable outer sheet colour as per voltage level decided by UPCL) in half cut Hume Pipe/PCC slab.

Making of Trench using conventional excavation method

Laying of HT cable at the depth of about 1.5 meter as per the code of practice for installation and maintenance of power cables as per IS 1255 :1983 or latest amendments using cable trench pullers (with Line tension Indicator) without open excavation in HDPE pipe:including provision of cable Labels

Laying and Pulling of 33kV (E) 3cx400mm2 XLPE Underground cable (Cable outer sheet colour as per voltage level decided by UPCL) by Machine.

Laying of HDPE Pipe PE 80/100 PN6 160 mm dia for HT cable at the depth of about 1.5 meter (with colour coding of HDPE pipe as approved by UPCL in order to differentiate other voltage cables laid in other pipes) including long bends,short bends, couplers etc to ensure proper safety of cables & to avoid damage at ends, bends

Laying of HT cable at the depth of about 1.5 meter as per the code of practice for installation and maintenance of power cables as per IS 1255 :1983 or latest amendments using cable trench pullers (with Line tension Indicator) using conventional excavation method in HDPE pipe:including provision of cable Labels

Laying and Pulling of 33kV 3cx400mm2 XLPE Underground cable (Cable outer sheet colour as per voltage level decided by UPCL)

Laying of High -Density Polythylene(HDPE) Pipe PE 80/100 PN6 160 mm Dia for XLPE Cable (colour of HDPE Pipe as per voltage level decided by UPCL) using conventional excavation method with making trench.

Supply and laying of B-Class Heavy duty GI pipe as IS 1239 at Underground Road crossing, Nala crossings etc complete in all respects including long bends,short bends, couplers etc to ensure proper safety of cables & to avoid damage at ends, bends .GI Pipe 150 mm Dia

Laying and Pulling of 33kV 3cx400mm2 XLPE Underground cable (Cable outer sheet colour as per voltage level decided by UPCL)

T-Connector for 33KV UG (As per Cable current Capacity )

Heat Shrinkable jointing kit for 33 kV 3cx400 Sq. mm. XLPE outdoor

Cable jointing kit straight through for 3cx400 Sq. mm. XLPE Cable

33KV 10 KA, outdoor type Lighting Arrester.

Supply and installation of Chemical earthing station as per IS 3043 complete with GI earthing electrode ,Bentonite, . Conductor upto test link, test link,earthing chamber, 450x450 mm C.I. Manhole chamber etc.

Supply and Fixing of Cable RCC Route Marker

New 33 KV Line with ACSR Conductor

33 KV New line with HTLS Conductor weight equivalent to ACSR Panther conductor with current capacity of 800 Amps.(Approx) for Plain

SINGLE POLE STRUCTURE AS PER Annexure- C-13A

Steel Tubular Poles 11 m long (STP 11.0 M, 410 MPa , SP-55) as per IS 2713 (Parts 1 to 3): 1980 (Bottom Portion hot dip galvanized) with MS Plate (300ɸx6)

33 kV, V Type cross arm made of MS Channel 100X50X6mm complete with clamps, Nuts, Bolts & washers all galvanized

33 kV F-Bracket made of MS Channel (100X50X6) mm with Clamps, Nuts, Bolts & Washers all galvanized

33 kV Polymeric Pin Insulator complete

Earth-wire clamp made of MS Flat 50x8mm with Nut & Bolts Warshers all galvanized.

33 kV Danger board with GI clamp Bolts & Nuts.

Anti-Climbing Device (2.5mm dia (12SWG) galvanized barbed wire 3.5 kg per pole) with 2 No. clamp made of 50x8 mm strip with Nuts, Bolts & Warshers all galvanized.

Aluminum paint (Double Coat)

Red Oxide paints

Rod type earthing of pole by GI earthing rod 20ɸx2500mm with welded Clamp 40X3mm & GI wire 8 SWG (0.5 Kg) with Bolts Clamp, Washers & Nuts complete as per Drw. REC/RDSS/GEN/07 all Galvanized

Concreting of Pole (CC ratio 1:3:6) and muffing (Kicking Block) (CC ratio 1:2:4) as per scope of work in SBD

Alignment tie with armoured rod for HTLS conductor

DOUBLE POLE STRUCTURE AS PER Annexure- C- 14A

Steel Tubular Poles 11 m long (STP 11.0 M, 410 MPa , SP-55) as per IS 2713 (Parts 1 to 3): 1980 (Bottom Portion hot dip galvanized) with MS Plate (300ɸx6)

33 kV top channel 125x65x6mm 3.2 mtr. Long with all fixing arrngement, PP, Clamp, bolts & nuts all galvanized.

33 KV Cross bracing Set 50x50x6mm with Belting angle of 65x65x6mm with clamps bolts & nuts all galvanized, as per SBD

33 kV Polymeric Pin Insulator complete

GI Fish Plate 50x8mm for 33 kv DP.

33 kV Composite Polymer Disc Insulator B & S type

Earth-wire clamp made of MS Flat 50x8mm with Nut & Bolts Warshers all galvanized.

33 kV Danger board with GI clamp Bolts & Nuts.

Aluminum paint (Double Coat)

Red Oxide paints

Anti-Climbing Device (2.5mm dia (12SWG) galvanized barbed wire 3.5 kg per pole) with 2 No. clamp made of 50x8 mm strip with Nuts, Bolts & Warshers all galvanized.

Rod type earthing of pole by GI earthing rod 20ɸx2500mm with welded Clamp 40X3mm & GI wire 8 SWG (0.5 Kg) with Bolts Clamp, Washers & Nuts complete as per Drw. REC/RDSS/GEN/07 all Galvanized

Concreting of Pole (CC ratio 1:3:6) and muffing (Kicking Block) (CC ratio 1:2:4) as per scope of work in SBD

Vibration Damper for HTLS conductor

Connector suitable for jumpering of HTLS conductor

Alignment tie with armoured rod for HTLS conductor

Tension string with Dead End assembly and cross arms strip for HTLS conductor

FOUR POLE STRUCTURE AS PER Annexure - C-15A

Steel Tubular Poles 11 m long (STP 11.0 M, 410 MPa , SP-55) as per IS 2713 (Parts 1 to 3): 1980 (Bottom Portion hot dip galvanized) with MS Plate (300ɸx6)

33 kV top channel 125x65x6mm 3.2 mtr. Long with all fixing arrngement, PP, Clamp, bolts & nuts all galvanized.

33 KV Cross bracing Set 50x50x6mm with Belting angle of 65x65x6mm with clamps bolts & nuts all galvanized, as per SBD

33 kV Polymeric Pin Insulator complete

33 kV E Clamp made of MS Channel (100X50X6)mm with Bolts & Nuts all galvanized.

33 kV Composite Polymer Disc Insulator B & S type

Earth-wire clamp made of MS Flat 50x8mm with Nut & Bolts Warshers all galvanized.

33 kV Danger board with GI clamp Bolts & Nuts.

Aluminum paint (Double Coat)

Red Oxide paints

Anti-Climbing Device (2.5mm dia (12SWG) galvanized barbed wire 3.5 kg per pole) with 2 No. clamp made of 50x8 mm strip with Nuts, Bolts & Warshers all galvanized.

Concreting of Pole (CC ratio 1:3:6) and muffing (Kicking Block) (CC ratio 1:2:4) as per scope of work in SBD

Rod type earthing of pole by GI earthing rod 20ɸx2500mm with welded Clamp 40X3mm & GI wire 8 SWG (0.5 Kg) with Bolts Clamp, Washers & Nuts complete as per Drw. REC/RDSS/GEN/07 all Galvanized

Vibration Damper for HTLS conductor

Connector suitable for jumpering of HTLS conductor

Alignment tie with armoured rod for HTLS conductor

Tension string with Dead End assembly and cross arms strip for HTLS conductor

HTLS Conductor weight equivalent to ACSR Panther conductor with current capacity of 800 Amps.(Approx) WITH 3% SAG , EARTH WIRE 7/16 SWG AS PER Annexure - C-16

HTLS Conductor weight equivalent to ACSR Panther conductor with current capacity of 800 Amps.(Approx) WITH 3% SAG

EARTH WIRE 7/16 SWG

Jointing Sleeve for HTLS Conductor (Mid span compression joint)

Repair Sleeve for HTLS Conductor

GUARDING OF LINE AS PER Annexure -C-17

Guarding channel 100x50x6 mm,3750 mm long with holding clamp, packing piece, nut & bolts etc. all galvanized

GI Eye Bolt 16mm dia, 236mm long for guarding

8 SWG GI wire for guard wires and lacings

6 SWG GI wire for guard wires and lacings

G.I. Wire No. 16 SWG for binding

SPECIAL TYPE BRACKET AS PER Annexure -C-19

MS CHANNEL 125x65x6MM all galvanized

MS CHANNEL 100x50x6MM all galvanized

MS ANGLE 75x75x8 MM all galvanized

MS CHANNEL 125x65x6MM all galvanized

PP & CLAMP all galvanized

33 kV F-Bracket made of MS Channel (100X50X6) mm with Clamps, Nuts, Bolts & Washers all galvanized

Stay complete (As per Annex-C-18)

33 kV Galvanized Stay Set Complete 20ϕX1800 mm. with 2 no. turn-buckles, anchor plate (300x300x8mm) as per scope of work in SBD All galvanized

Stay Wire 7/8 SWG

33kv Stay Insulator

Stay Clamp (50x8mm)with Nut, & Bolts all galvanized

Grouting with Cement Concreating ratio with 1:3:6

33 KV New line with Panther conductor for Plains

SINGLE POLE STRUCTURE AS PER Annexure- C-13

Steel Tubular Poles 11 m long (STP 11.0 M, 410 MPa , SP-55) as per IS 2713 (Parts 1 to 3): 1980 (Bottom Portion hot dip galvanized) with MS Plate (300ɸx6)

33 kV, V Type cross arm made of MS Channel 100X50X6mm complete with clamps, Nuts, Bolts & washers all galvanized

33 kV F-Bracket made of MS Channel (100X50X6) mm with Clamps, Nuts, Bolts & Washers all galvanized

33 kV Polymeric Pin Insulator complete

Earth-wire clamp made of MS Flat 50x8mm with Nut & Bolts Warshers all galvanized.

33 kV Danger board with GI clamp Bolts & Nuts.

Anti-Climbing Device (2.5mm dia (12SWG) galvanized barbed wire 3.5 kg per pole) with 2 No. clamp made of 50x8 mm strip with Nuts, Bolts & Warshers all galvanized.

Aluminum Binding wire & tape

Aluminum paint (Double Coat)

Red Oxide paints

Rod type earthing of pole by GI earthing rod 20ɸx2500mm with welded Clamp 40X3mm & GI wire 8 SWG (0.5 Kg) with Bolts Clamp, Washers & Nuts complete as per Drw. REC/RDSS/GEN/07 all Galvanized

Concreting of Pole (CC ratio 1:3:6) and muffing (Kicking Block) (CC ratio 1:2:4) as per scope of work in SBD

DOUBLE POLE STRUCTURE AS PER Annexure- C- 14

Steel Tubular Poles 11 m long (STP 11.0 M, 410 MPa , SP-55) as per IS 2713 (Parts 1 to 3): 1980 (Bottom Portion hot dip galvanized) with MS Plate (300ɸx6)

33 kV top channel 125x65x6mm 3.2 mtr. Long with all fixing arrngement, PP, Clamp, bolts & nuts all galvanized.

33 KV Cross bracing Set 50x50x6mm with Belting angle of 65x65x6mm with clamps bolts & nuts all galvanized, as per SBD

33 kV Polymeric Pin Insulator complete

GI Fish Plate 50x8mm for 33 kv DP.

33kV Disc fitting for Panther conductor 90 KN B&S type

33 kV Composite Polymer Disc Insulator B & S type

Earth-wire clamp made of MS Flat 50x8mm with Nut & Bolts Warshers all galvanized.

33 kV Danger board with GI clamp Bolts & Nuts.

PG clamp/Wedge type for HTLS/Panther/Dog / Racoon conductor

Aluminum Binding wire & tape

Aluminum paint (Double Coat)

Red Oxide paints

Anti-Climbing Device (2.5mm dia (12SWG) galvanized barbed wire 3.5 kg per pole) with 2 No. clamp made of 50x8 mm strip with Nuts, Bolts & Warshers all galvanized.

Rod type earthing of pole by GI earthing rod 20ɸx2500mm with welded Clamp 40X3mm & GI wire 8 SWG (0.5 Kg) with Bolts Clamp, Washers & Nuts complete as per Drw. REC/RDSS/GEN/07 all Galvanized

Concreting of Pole (CC ratio 1:3:6) and muffing (Kicking Block) (CC ratio 1:2:4) as per scope of work in SBD

FOUR POLE STRUCTURE AS PER Annexure - C-15

Steel Tubular Poles 11 m long (STP 11.0 M, 410 MPa , SP-55) as per IS 2713 (Parts 1 to 3): 1980 (Bottom Portion hot dip galvanized) with MS Plate (300ɸx6)

33 kV top channel 125x65x6mm 3.2 mtr. Long with all fixing arrngement, PP, Clamp, bolts & nuts all galvanized.

33 KV Cross bracing Set 50x50x6mm with Belting angle of 65x65x6mm with clamps bolts & nuts all galvanized, as per SBD

33 kV Polymeric Pin Insulator complete

33 kV E Clamp made of MS Channel (100X50X6)mm with Bolts & Nuts all galvanized.

33kV Disc fitting for Panther conductor 90 KN B&S type

33 kV Composite Polymer Disc Insulator B & S type

Earth-wire clamp made of MS Flat 50x8mm with Nut & Bolts Warshers all galvanized.

33 kV Danger board with GI clamp Bolts & Nuts.

PG clamp/Wedge type for HTLS/Panther/Dog / Racoon conductor

Aluminum Binding wire & tape

Aluminum paint (Double Coat)

Red Oxide paints

Anti-Climbing Device (2.5mm dia (12SWG) galvanized barbed wire 3.5 kg per pole) with 2 No. clamp made of 50x8 mm strip with Nuts, Bolts & Warshers all galvanized.

Concreting of Pole (CC ratio 1:3:6) and muffing (Kicking Block) (CC ratio 1:2:4) as per scope of work in SBD

Rod type earthing of pole by GI earthing rod 20ɸx2500mm with welded Clamp 40X3mm & GI wire 8 SWG (0.5 Kg) with Bolts Clamp, Washers & Nuts complete as per Drw. REC/RDSS/GEN/07 all Galvanized

ACSR PANTHER CONDUCTOR With 3% Sag As Per Annexure-C-23

ACSR PANTHER Conductor for Phase with 3% sag.

EARTH WIRE 7/16 SWG

Jointing Sleeve for PANTHER Conductor

GUARDING OF LINE AS PER Annexure -C-17

Guarding channel 100x50x6 mm,3750 mm long with holding clamp, packing piece, nut & bolts etc. all galvanized

GI Eye Bolt 16mm dia, 236mm long for guarding

8 SWG GI wire for guard wires and lacings

6 SWG GI wire for guard wires and lacings

G.I. Wire No. 16 SWG for binding

SPECIAL TYPE BRACKET AS PER Annexure -C-19

MS CHANNEL 125x65x6MM all galvanized

MS CHANNEL 100x50x6MM all galvanized

MS ANGLE 75x75x8 MM all galvanized

MS CHANNEL 125x65x6MM all galvanized

PP & CLAMP all galvanized

33 kV F-Bracket made of MS Channel (100X50X6) mm with Clamps, Nuts, Bolts & Washers all galvanized

Stay complete (As per Annex-C-18)

33 kV Galvanized Stay Set Complete 20ϕX1800 mm. with 2 no. turn-buckles, anchor plate (300x300x8mm) as per scope of work in SBD All galvanized

Stay Wire 7/8 SWG

33kv Stay Insulator

Stay Clamp (50x8mm)with Nut, & Bolts all galvanized

Grouting with Cement Concreating ratio with 1:3:6

New 33 KV Bay With VCB's

33 KV Bay with SF-6 (SCADA Compatible)

Cost of Earthmat & Delta Earthing of Sub-station (M3)

M.S. Angle 65x65x6mm for cleat at cross joint all galvanized.

M.S Round 32mm dia, 6.21 Kg/mtr for earth mat, electodes for earth mat & delta earthing

Gravel pitching of size 1/2" to 3/4" (20x30x1)

G.I. Strip 65x6 mm.

G.I. Strip 40x6 mm.

Excavation of earth in mixed soil

Straightening and laying of Earth mat of 32 mm M S round 0.6 mtr deep in mixed soil according to drawing or as per UPCL direction or/and as per site requirement. Making T-joints, cross joint and Lap joints by welding of M S round bar together using cleats of MS Angles 65x65x6 mm, chipping the slag and painting of the joints with black bitumen paint (including supply of paint) to avoid rusting. Cutting & making electrode 2.5 mtr long with conical pointed bottom and driving of the electrode remains 450 mm below ground level. Backfilling of soil in trenches, ramming and leveling of trench properly after completion of eartmat and earthing work is complete. Making of Delta/Bridge earthing for structure/panels i.e. LA, 11 KV panels, ACDB, DCDB, Neutral of power & station transformer.

Earthing of structures using G.I. strips including strengthening, cutting, bending & welding with structure and equipments.

Special earthing by treatment of soil with highly conducted material like combination of bentonite, conductive cement, coke dust, sodium carbonate, MgSo4, NaCl & CaCl2 as per ISS 3043-1987

Earthfilling in yard

COST OF TERMINAL GANTRY WITH LA, Line Isolater,Bus Isolator, Post Insulator, CT, Busbar & connectors AT 33/11 KV SUB-STATION (M4)

COST OF TERMINAL GANTRY

M.S. Channel 125x65x65 mm all galvanized.

M.S. Angle 50x50x6mm all galvanized.

M.S. Channel 125x65x65 mm all galvanized.

33 kV Composite Polymer Disc Insulator B & S type

33kV Disc fitting for Panther conductor 90 KN B&S type

33KV 10 KA, outdoor type Lighting Arrester.

M.S. bolt & nut with washers all galvanized.

Stone pad 300x300x75 mm.

MS plate 225x225x8 mm thick all galvanized.

Fabrication charges of structure as per approved drawing

Excavation of earth in mixed soil

Grouting with Cement Concreating ratio with 1:3:6

Cement Plaster 1:4, on top & side walls

Erection of T.G. with LA

COST OF ONE SET OF LINE ISOLATOR

Line Isolator, 800A, 33KV

M.S. Channel 125x65x65 mm all galvanized.

M.S. Angle 75x75x8mm all galvanized.

M.S. Angle 50x50x6mm all galvanized.

M.S. flat 50x6 mm. all galvanized.

M.S. bolts & nut with washers all galvanized.

Fabrication charges of structure as per approved drawing

Excavation of earth in mixed soil

Grouting with Cement Concreating ratio with 1:3:6

Cement Plaster 1:4, on top & side walls

Erection charges of isolator structure

Erection charges of line isolator complete by assembeling, fixing of operating handle, pins etc for smooth operation of the isolator.

COST OF ONE SET OF BUS ISOLATOR

Bus Isolator, 800A, 33KV

M.S. Channel 125x65x65 mm all galvanized.

M.S. Angle 75x75x8mm all galvanized.

M.S. Angle 50x50x6mm all galvanized.

M.S. flat 50x6 mm. all galvanized.

M.S. bolts & nut with washers all galvanized.

Fabrication charges of structure as per approved drawing

Excavation of earth in mixed soil

Grouting with Cement Concreating ratio with 1:3:6

Cement Plaster 1:4, on top & side walls

Erection charges of isolator structure

Erection charges of Isolator complete by assembeling, fixing of operating handle, pins etc for smooth operation of the isolator.

COST OF ONE SET OF 33 KV P.I.

M.S. Channel 125x65x65 mm all galvanized.

M.S. Angle 75x75x8mm all galvanized.

33 KV Post Insulator

MS Plate 225x225x8 mm. all galvanized.

M.S. bolts & nut with washers all galvanized.

Fabrication charges of structure as per approved drawing

Excavation of earth in mixed soil

Grouting with Cement Concreating ratio with 1:3:6

Cement Plaster 1:4, on top & side walls

Erection charges of structure

Fixing and erection charges of Post Insulator

COST OF ONE SET OF CT

CT Out door, 33 KV CTR 200-100/1-1 A (SCADA Compatible)

M.S. Channel 125x65x65 mm all galvanized.

M.S. Angle 75x75x8mm all galvanized.

Junction box with 33 kv CT

MS Plate 400x400x8 mm all galvanized.

M.S. bolts & nut with washers all galvanized.

Fabrication charges of structure as per approved drawing

Excavation of earth in mixed soil

Grouting with Cement Concreating ratio with 1:3:6

Cement Plaster 1:4, on top & side walls

Erection charges of CT structure

Fixing and erection of CT

COST OF BUS BAR & CONNECTORS

ACSR PANTHER Conductor for Phase with 3% sag.

ACSR Weasel Conductor with 3 % Sag

33kV Disc fitting for Panther conductor 90 KN B&S type

33 kV Composite Polymer Disc Insulator B & S type

PG clamp/Wedge type for Panther to Panther

PG clamp/Wedge type for Panther to Dog

Connectors suitable for Panther

1. For LA suitable for panther

2. For LA suitable for dog/weasel

3. For Isolators suitable for panther

4. For Isolators suitable for dog/weasel

5. For CT/PT suitable for panther/dog

6. For PI suitable for panther

7. For , VCB suitable for panther

Labour charges for drawing bus-bar & making connection in each equipment, main & auxilary bus bar.

Cost of 33 KV SF6 -1250 AMP, Circuit Breaker & C&R Panels (M5)

33 KV SF6, 1250A, 24 V DC for I/c (SCADA Compatible)

Control Panel Inc 33 KV Single Ckt, 24 V DC (SCADA Compatible)

Control Panel Inc 33 KV Double Ckt, 24 V DC (SCADA Compatible)

Cost of 33 KV Cable Laying & Control Cable(M6)

Supply of 33kV (E) 3cx400mm2 XLPE Underground cable (Cable outer sheet colour as per voltage level decided by UPCL)

M.S CHANNEL 100X50MMX2.8 MTRX4X10 KG/MTR all galvanized.

Heat Shrinkable jointing kit for 33 kV 3cx400 Sq. mm. XLPE indoor/outdoor type

GI pipe 4" 3 mtr long

Laying of 33 kv/11 kv cable by excavation oc cable trench in mixed soil,filling of the sand upto height 250mm from bottom most level of the cable trench thereafter properly laing of the cable by placing brick on the both side of the cable then refilling of the sand from the top so as to cover the cable completely and then placing the bricks on the top of te covered cable, spreadinf of the cable warning tape and covering the tench completely with mixed soil including cost of sand bricks etc.

Filling of cable jointing kit 33 kv

Fabrication charges of structure as per approved drawing

COST OF LAYING LT CONTROL CABLES & CABLE TRENCH

M.S. Angle 50x50x6mm all galvanized.

LT Control Cable

iii) 10x2.5 Sq.mm

ii) 4x2.5 Sq.mm

i) 2x2.5 Sq.mm

MS Bar, 12mm

Perforated tray 400mm width for cable trench

Perforated tray 300 mm width for cable trench

Perforated tray 100 mm width for cable trench

Fabrication charges of structure as per approved drawing

Making cable trench.including fabrication, fixing of MS angle 50/40X6 mm size (excluding the cost of MS Angle/ MS bar) on side edge with all excavation, CC work, brick work, fixing of cable support angle one/two tier as required with stopper arrangement at 0.5 mtr gap throughout the length of the trench, making of cable trench covers with MS Bar welded mesh angle frame with lifting hooks, fixing of perforated tray complete as per drawing including cost of sand, cement, bricks, metal (gitti) etc.

Laying, spreading & jointing of LT control cable by using propers ties,lugs, connectors, cable glands in cable trench and equipments..

Cost of misc. items required for sub-station (M7)

24 V Battery charger with boost & trickle charge

24 V Battery set Maint. Free

DCDB 24 V

single line diagram board of size 2 1/2x 1 1/2 polyflex board with frame,duly painted & writing

Name plate of equipment TG, LI, BI, PI, BG, CT, PT, CB, LA etc. (Size 9"x5" with white base, red border & letter written in red color)

Sundries items Cable tie, Alu lug, Copper lug & HT, LT tape, pvc compound, ferrule, pvc flexible pipe, paint writing on panels, HT LT diff size cable gland.

COST OF FIRE PROTECTION

Rubber mat 1 mtr. wide x 2 mtr long and 12 mm thick to withstand 11 KV dielectric strength as per IS 5424-1969. Along the all equipments in Control Room.

Carbon dioxide (CO2) type fire extinguishers conforming to IS 2878 - 1976 and cylinders fully charged of 4.5 Kg capacity.

Foam type fire extinguishers, Portable type 5 lit capacity hanged on wall with bracket complete as required

Testing of S/s

Replacement of Old Aged VCBs

33KV Incomer (SCADA Compatible)

33 KV SF6, 1250A, 24 V DC for I/c (SCADA Compatible)

33kV Relay and Control Panel for Single Ckt.(SCADA Compatible)

33kV Relay and Control Panel for Single T/F.(SCADA Compatible)

33kV Relay and Control Panel for Double Ckt.(SCADA Compatible)

33kV Relay and Control Panel for Double T/F.(SCADA Compatible)

Dismantling of existing 33 KV CB & Control Panel.

33KV Outgoing (SCADA Compatible)

33 KV SF6, 1250A, 24 V DC for O/g (SCADA Compatible)

33kV Relay and Control Panel for Single Ckt.(SCADA Compatible)

33kV Relay and Control Panel for Single T/F.(SCADA Compatible)

33kV Relay and Control Panel for Double Ckt.(SCADA Compatible)

33kV Relay and Control Panel for Double T/F.(SCADA Compatible)

Dismantling of existing 33 KV CB & Control Panel.

Replacement of 33 KV Old /Frayed Conductor

Reconductoring of 33 KV line with HTLS Conductor weight equivalent to ACSR Dog conductor with current capacity of 700 Amps.(Approx)

Rod type earthing of pole by GI earthing rod 20ɸx2500mm with welded Clamp 40X3mm & GI wire 8 SWG (0.5 Kg) with Bolts Clamp, Washers & Nuts complete as per Drw. REC/RDSS/GEN/07 all Galvanized

33 kV Polymeric Pin Insulator complete

Single pole SP 72 as per annexure -C-36A

Steel Tubular Poles 13 m long (STP 13.0 M, 410 MPa , SP-72) as per IS 2713 (Parts 1 to 3): 1980 (Bottom Portion hot dip galvanized) with MS Plate (300ɸx6)

33 kV, V Type cross arm made of MS Channel 100X50X6mm complete with clamps, Nuts, Bolts & washers all galvanized

33 kV F-Bracket made of MS Channel (100X50X6) mm with Clamps, Nuts, Bolts & Washers all galvanized

33 kV Polymeric Pin Insulator complete

Earth-wire clamp made of MS Flat 50x8mm with Nut & Bolts Warshers all galvanized.

33 kV Danger board with GI clamp Bolts & Nuts.

Anti-Climbing Device (2.5mm dia (12SWG) galvanized barbed wire 3.5 kg per pole) with 2 No. clamp made of 50x8 mm strip with Nuts, Bolts & Warshers all galvanized.

Aluminum paint (Double Coat)

Red Oxide paints

Concreting of Pole (CC ratio 1:3:6) and muffing (Kicking Block) (CC ratio 1:2:4) as per scope of work in SBD

Rod type earthing of pole by GI earthing rod 20ɸx2500mm with welded Clamp 40X3mm & GI wire 8 SWG (0.5 Kg) with Bolts Clamp, Washers & Nuts complete as per Drw. REC/RDSS/GEN/07 all Galvanized

Alignment tie with armoured rod for HTLS conductor

Additional Pole STP-55 for 33 KV line (As per annexure J-20 A

Steel Tubular Poles 11 m long (STP 11.0 M, 410 MPa , SP-55) as per IS 2713 (Parts 1 to 3): 1980 (Bottom Portion hot dip galvanized) with MS Plate (300ɸx6)

33 kV, V Type cross arm made of MS Channel 100X50X6mm complete with clamps, Nuts, Bolts & washers all galvanized

33 kV F-Bracket made of MS Channel (100X50X6) mm with Clamps, Nuts, Bolts & Washers all galvanized

33 kV Polymeric Pin Insulator complete

Earth-wire clamp made of MS Flat 50x8mm with Nut & Bolts Warshers all galvanized.

33 kV Danger board with GI clamp Bolts & Nuts.

Anti-Climbing Device (2.5mm dia (12SWG) galvanized barbed wire 3.5 kg per pole) with 2 No. clamp made of 50x8 mm strip with Nuts, Bolts & Warshers all galvanized.

Aluminum paint (Double Coat)

Red Oxide paints

Concreting of Pole (CC ratio 1:3:6) and muffing (Kicking Block) (CC ratio 1:2:4) as per scope of work in SBD

Rod type earthing of pole by GI earthing rod 20ɸx2500mm with welded Clamp 40X3mm & GI wire 8 SWG (0.5 Kg) with Bolts Clamp, Washers & Nuts complete as per Drw. REC/RDSS/GEN/07 all Galvanized

Alignment tie with armoured rod for HTLS conductor

33 kV Composite Polymer Disc Insulator B & S type

HTLS Conductor weight equivalent to ACSR Dog conductor with current capacity of 700 Amps.(Approx) WITH 3% SAG

Stay complete (As per annexure C-18)

33 kV Galvanized Stay Set Complete 20ϕX1800 mm. with 2 no. turn-buckles, anchor plate (300x300x8mm) as per scope of work in SBD All galvanized

Stay Wire 7/8 SWG

33kv Stay Insulator

Stay Clamp (50x8mm)with Nut, & Bolts all galvanized

Grouting with Cement Concreating ratio with 1:3:6

Dismantling of old conductor and accessories with opening of existing jumpering and making of bundle including Loading/Unloading Complete Work.

Vibration Damper for HTLS conductor

Connector suitable for jumpering of HTLS conductor

Jointing Sleeve for HTLS Conductor (Mid span compression joint)

Repair Sleeve for HTLS Conductor

Alignment tie with armoured rod for HTLS conductor

Tension string with Dead End assembly and cross arms strip for HTLS conductor

Reconductoring of 33 KV line with ACSR Panther Conductor

Rod type earthing of pole by GI earthing rod 20ɸx2500mm with welded Clamp 40X3mm & GI wire 8 SWG (0.5 Kg) with Bolts Clamp, Washers & Nuts complete as per Drw. REC/RDSS/GEN/07 all Galvanized

33 kV Polymeric Pin Insulator complete

Single pole SP 72 as per annexure -C-36

Steel Tubular Poles 13 m long (STP 13.0 M, 410 MPa , SP-72) as per IS 2713 (Parts 1 to 3): 1980 (Bottom Portion hot dip galvanized) with MS Plate (300ɸx6)

33 kV, V Type cross arm made of MS Channel 100X50X6mm complete with clamps, Nuts, Bolts & washers all galvanized

33 kV F-Bracket made of MS Channel (100X50X6) mm with Clamps, Nuts, Bolts & Washers all galvanized

33 kV Polymeric Pin Insulator complete

Earth-wire clamp made of MS Flat 50x8mm with Nut & Bolts Warshers all galvanized.

33 kV Danger board with GI clamp Bolts & Nuts.

Anti-Climbing Device (2.5mm dia (12SWG) galvanized barbed wire 3.5 kg per pole) with 2 No. clamp made of 50x8 mm strip with Nuts, Bolts & Warshers all galvanized.

Aluminum paint (Double Coat)

Red Oxide paints

Concreting of Pole (CC ratio 1:3:6) and muffing (Kicking Block) (CC ratio 1:2:4) as per scope of work in SBD

Rod type earthing of pole by GI earthing rod 20ɸx2500mm with welded Clamp 40X3mm & GI wire 8 SWG (0.5 Kg) with Bolts Clamp, Washers & Nuts complete as per Drw. REC/RDSS/GEN/07 all Galvanized

Additional Pole STP-55 for 33 KV line (As per annexure J-20)

Steel Tubular Poles 11 m long (STP 11.0 M, 410 MPa , SP-55) as per IS 2713 (Parts 1 to 3): 1980 (Bottom Portion hot dip galvanized) with MS Plate (300ɸx6)

33 kV, V Type cross arm made of MS Channel 100X50X6mm complete with clamps, Nuts, Bolts & washers all galvanized

33 kV F-Bracket made of MS Channel (100X50X6) mm with Clamps, Nuts, Bolts & Washers all galvanized

33 kV Polymeric Pin Insulator complete

Earth-wire clamp made of MS Flat 50x8mm with Nut & Bolts Warshers all galvanized.

33 kV Danger board with GI clamp Bolts & Nuts.

Anti-Climbing Device (2.5mm dia (12SWG) galvanized barbed wire 3.5 kg per pole) with 2 No. clamp made of 50x8 mm strip with Nuts, Bolts & Warshers all galvanized.

Aluminum Binding wire & tape

Aluminum paint (Double Coat)

Red Oxide paints

Concreting of Pole (CC ratio 1:3:6) and muffing (Kicking Block) (CC ratio 1:2:4) as per scope of work in SBD

Rod type earthing of pole by GI earthing rod 20ɸx2500mm with welded Clamp 40X3mm & GI wire 8 SWG (0.5 Kg) with Bolts Clamp, Washers & Nuts complete as per Drw. REC/RDSS/GEN/07 all Galvanized

33 kV Composite Polymer Disc Insulator B & S type

33kV Disc fitting for Panther conductor 90 KN B&S type

ACSR PANTHER Conductor for Phase with 3% sag.

Aluminum Binding wire & tape

Jointing Sleeve for PANTHER Conductor

PG clamp/Wedge type for Panther

Stay complete (As per annexure C-18)

33 kV Galvanized Stay Set Complete 20ϕX1800 mm. with 2 no. turn-buckles, anchor plate (300x300x8mm) as per scope of work in SBD All galvanized

Stay Wire 7/8 SWG

33kv Stay Insulator

Stay Clamp (50x8mm)with Nut, & Bolts all galvanized

Grouting with Cement Concreating ratio with 1:3:6

Dismantling of old conductor and accessories with opening of existing jumpering and making of bundle including Loading/Unloading Complete Work.

New 11 KV XLPE Underground Cable

11 KV UG XLPE 3x240 Sq mm Single Ckt.

SINGLE POLE STRUCTURE AS PER Annexure- D 15

Steel Tubular Poles 11 m long (STP 11.0 M, 410 MPa , SP-55) as per IS 2713 (Parts 1 to 3): 1980 (Bottom Portion hot dip galvanized) with MS Plate (300ɸx6)

11 kV top channel 100x50x6mm 1.5 mtr. Long with PP & clamp, nuts & bolt all galvanized as per SBD specs

11 kV Polymer Pin Insulator with Pin complete.

11 kV Danger Board with GI clamp Bolts & Nuts

Anti-Climbing Device (2.5mm dia (12SWG) galvanized barbed wire 3.5 kg per pole) with 2 No. clamp made of 50x8 mm strip with Nuts, Bolts & Warshers all galvanized.

Aluminum paint (Double Coat)

Red Oxide paints

Rod type earthing of pole by GI earthing rod 20ɸx2500mm with welded Clamp 40X3mm & GI wire 8 SWG (0.5 Kg) with Bolts Clamp, Washers & Nuts complete as per Drw. REC/RDSS/GEN/07 all Galvanized

Concreting of Pole (CC ratio 1:3:6) and muffing (Kicking Block) (CC ratio 1:2:4) as per scope of work in SBD

DOUBLE POLE STRUCTURE AS PER Annexure- D 16

Steel Tubular Poles 11 m long (STP 11.0 M, 410 MPa , SP-55) as per IS 2713 (Parts 1 to 3): 1980 (Bottom Portion hot dip galvanized) with MS Plate (300ɸx6)

11 KV Cross bracing Set 50x50x6mm with Belting angle of 65x65x6mm with clamps bolts & nuts all galvanized, as per SBD

11 kV top channel 100x50x6mm 2.2 mtr. Long with PP & clamp, nuts & bolt all galvanized as per SBD specs

Base Channel (100X50X6) 2.2 mtr. Long with Clamps and fittings as per SBD specs all galvanized.

11 kV Polymer Pin Insulator with Pin complete.

11 kV Danger Board with GI clamp Bolts & Nuts

Anti-Climbing Device (2.5mm dia (12SWG) galvanized barbed wire 3.5 kg per pole) with 2 No. clamp made of 50x8 mm strip with Nuts, Bolts & Warshers all galvanized.

Aluminum paint (Double Coat)

Red Oxide paints

Rod type earthing of pole by GI earthing rod 20ɸx2500mm with welded Clamp 40X3mm & GI wire 8 SWG (0.5 Kg) with Bolts Clamp, Washers & Nuts complete as per Drw. REC/RDSS/GEN/07 all Galvanized

Concreting of Pole (CC ratio 1:3:6) and muffing (Kicking Block) (CC ratio 1:2:4) as per scope of work in SBD

Stays Complete (As Per Annex. F-15 )

Galvanized Stay Set Complete 16ϕX1800 mm. with 2 no. turn-buckle, anchor plate (200x200x6mm) as per scope of work in SBD All galvanized

GI Stay Wire 7/10 SWG

11 kV Stay Insulator as per SBD

Stay Clamp (50x8mm)with Nut, & Bolts all galvanized

Grouting with Cement Concreating ratio with 1:3:6

Supply of 11kV (E) 3*240mm2 XLPE cable (Cable outer sheet colour as per voltage level decided by UPCL)

Supply of HDPE Pipe PE 80/100 PN6 160 mm dia for HT cable (with colour coding of HDPE pipe as approved by UPCL in order to differentiate other voltage cables laid in other pipes) including long bends,short bends, couplers etc to ensure proper safety of cables & to avoid damage at ends, bends

Supply of Half Cut 200mm Cement Hume Pipe/PCC Slab

CABLE LAYING : Laying of HT cable as per the code of practice for installation and maintenance of power cables as per IS 1255 :1983 or latest amendments using conventional excavation method and Laying the cable in Half Cut 200mm Cement Hume Pipe/PCC Slab at the depth of about 1.2 meter as per site requirement & Cable dia including using cable trench pullers (with Line tension Indicator) and provision of cable Labels ,Protectin Tape (Tape Tile) etc. complete in all respect in the form original before digging. (All the required material to be provided by contractor) (As per approved drawing of UPCL )

Laying and Pulling of 11kV (E) 3*240mm2 XLPE cable (Cable outer sheet colour as per voltage level decided by UPCL) in half cut Hume Pipe/PCC slab.

Making of Trench using conventional excavation method

Laying of HT cable at the depth of about 1.2 meter as per the code of practice for installation and maintenance of power cables as per IS 1255 :1983 or latest amendments using cable trench pullers (with Line tension Indicator) without open excavation in HDPE pipe:including provision of cable Labels

Pulling and Laying of 11kV (E) 3*240mm2 XLPE cable (Cable outer sheet colour as per voltage level decided by UPCL) by Machine.

Laying of HDPE Pipe 160 mm dia for HT cable at the depth of about 1.2 meter (with colour coding of HDPE pipe as approved by UPCL in order to differentiate other voltage cables laid in other pipes) including long bends,short bends, couplers etc to ensure proper safety of cables & to avoid damage at ends, bends

Laying of HT cable at the depth of about 1.2 meter as per the code of practice for installation and maintenance of power cables as per IS 1255 :1983 or latest amendments using cable trench pullers (with Line tension Indicator) using conventional excavation method in HDPE pipe:including provision of cable Labels

Pulling and Laying of 11kV (E) 3*240mm2 XLPE cable (Cable outer sheet colour as per voltage level decided by UPCL) conventional excavation method.

Laying of High -Density Polythylene(HDPE) Pipe 160 mm Dia for 11kV XLPE Cable (colour of HDPE Pipe as per voltage level decided by UPCL) using conventional excavation method with making trench.

Supply and laying of B-Class Heavy duty GI pipe as IS 1239 at Underground Road crossing, Nala crossings etc complete in all respects including long bends,short bends, couplers etc to ensure proper safety of cables & to avoid damage at ends, bends .GI Pipe 150 mm Dia

Pulling and Laying of 11kV (E) 3*240mm2 XLPE cable (Cable outer sheet colour as per voltage level decided by UPCL) conventional excavation method.

Heat Shrinkable jointing kit for 11 kV 3*240 Sq. mm. XLPE outdoor

Cable jointing kit straight through for 3*240 Sq. mm. XLPE Cable

T-Connector (As per Cable current Capacity )

9KV, 5KA Outdoor type Lighting Arrester Polymer.

Supply and installation of Chemical earthing station as per IS 3043 complete with GI earthing electrode ,Bentonite, . Conductor upto test link, test link,earthing chamber, 450x450 mm C.I. Manhole chamber etc.

Supply and Fixing of Cable RCC Route Marker

New 11 KV Line with ACSR Conductor

11 KV New line with Dog conductor for Plains SP-55

No. of Single pole as per annexure -F-10

Steel Tubular Poles 11 m long (STP 11.0 M, 410 MPa , SP-55) as per IS 2713 (Parts 1 to 3): 1980 (Bottom Portion hot dip galvanized) with MS Plate (300ɸx6)

V Type cross arm made of MS Channel 100X50X6mm complete with Clamps, Clamps, Nuts, Bolts & warshers all galvanized

F-Bracket made of MS Channel (100X50X6) mm with Clamps, Nuts, Bolts & Washers all galvanized

11 kV Polymer Pin Insulator with Pin complete.

11 kV Danger Board with GI clamp Bolts & Nuts

Anti-Climbing Device (2.5mm dia (12SWG) galvanized barbed wire 3.5 kg per pole) with 2 No. clamp made of 50x8 mm strip with Nuts, Bolts & Warshers all galvanized.

Aluminum Binding wire & tape

Concreting of Pole (CC ratio 1:3:6) and muffing (Kicking Block) (CC ratio 1:2:4) as per scope of work in SBD

Rod type earthing of pole by GI earthing rod 20ɸx2500mm with welded Clamp 40X3mm & GI wire 8 SWG (0.5 Kg) with Bolts Clamp, Washers & Nuts complete as per Drw. REC/RDSS/GEN/07 all Galvanized

Aluminum paint (Double Coat)

Red Oxide paints

No. of Single Section pole as per annexure -F-11

Steel Tubular Poles 11 m long (STP 11.0 M, 410 MPa , SP-55) as per IS 2713 (Parts 1 to 3): 1980 (Bottom Portion hot dip galvanized) with MS Plate (300ɸx6)

11 kV top channel 100x50x6mm 1.5 mtr. Long with PP & clamp, nuts & bolt all galvanized as per SBD specs

F-Bracket made of MS Channel (100X50X6) mm with Clamps, Nuts, Bolts & Washers all galvanized

11 kV Polymer Pin Insulator with Pin complete.

11 kV Compsite Polymer Disc Insulator B & S type

11 kV Disc Fittings B&S type 70 KN for ACSR Dog

PG clamp/Wedge type for ACSR Dog/Raccoon / Rabbit

11 kV Danger Board with GI clamp Bolts & Nuts

Anti-Climbing Device (2.5mm dia (12SWG) galvanized barbed wire 3.5 kg per pole) with 2 No. clamp made of 50x8 mm strip with Nuts, Bolts & Warshers all galvanized.

Aluminum Binding wire & tape

Concreting of Pole (CC ratio 1:3:6) and muffing (Kicking Block) (CC ratio 1:2:4) as per scope of work in SBD

Rod type earthing of pole by GI earthing rod 20ɸx2500mm with welded Clamp 40X3mm & GI wire 8 SWG (0.5 Kg) with Bolts Clamp, Washers & Nuts complete as per Drw. REC/RDSS/GEN/07 all Galvanized

Aluminum paint (Double Coat)

Red Oxide paints

No. of Double Pole Structure as per annexure -F-12

Steel Tubular Poles 11 m long (STP 11.0 M, 410 MPa , SP-55) as per IS 2713 (Parts 1 to 3): 1980 (Bottom Portion hot dip galvanized) with MS Plate (300ɸx6)

11 kV top channel 100x50x6mm 2.2 mtr. Long with PP & clamp, nuts & bolt all galvanized as per SBD specs

11 KV Cross bracing Set 50x50x6mm with Belting angle of 65x65x6mm with clamps bolts & nuts all galvanized, as per SBD

11 kV Polymer Pin Insulator with Pin complete.

GI Fish Plate 50x8mm for 11 kv DP

11 kV Compsite Polymer Disc Insulator B & S type

11 kV Disc Fittings B&S type 70 KN for ACSR Dog

11 kV Danger Board with GI clamp Bolts & Nuts

PG clamp/Wedge type for ACSR Dog/Raccoon / Rabbit

Aluminum Binding wire & tape

Aluminum paint (Double Coat)

Red Oxide paints

Anti-Climbing Device (2.5mm dia (12SWG) galvanized barbed wire 3.5 kg per pole) with 2 No. clamp made of 50x8 mm strip with Nuts, Bolts & Warshers all galvanized.

Concreting of Pole (CC ratio 1:3:6) and muffing (Kicking Block) (CC ratio 1:2:4) as per scope of work in SBD

Rod type earthing of pole by GI earthing rod 20ɸx2500mm with welded Clamp 40X3mm & GI wire 8 SWG (0.5 Kg) with Bolts Clamp, Washers & Nuts complete as per Drw. REC/RDSS/GEN/07 all Galvanized

ACSR Dog Conductor for Phase with 3% sag.As per annexure-F-24

ACSR Dog Conductor with 3 % Sag

Jointing Sleeves suitable for ACSR DOG conductor

Guarding of 11 KV line. As per annexure- F-14

Guarding channel 100x50x6 mm,2210 mm long with holding clamp, packing piece, nut & bolts etc. all galvanized as per SBD

G.I. Wire No. 6 SWG along the span (For 1 Km. line)

EARTH WIRE 7/16 SWG

G.I. Wire No. 8 SWG accross the span (For 1 Km. line)

GI Eye Bolt 16mm dia, 236mm long for guarding

G.I. Wire No. 16 SWG for binding

Stay complete (As per Annex F-15)

Galvanized Stay Set Complete 16ϕX1800 mm. with 2 no. turn-buckle, anchor plate (200x200x6mm) as per scope of work in SBD All galvanized

GI Stay Wire 7/10 SWG

11 kV Stay Insulator as per SBD

Stay Clamp (50x8mm)with Nut, & Bolts all galvanized

Grouting with Cement Concreating ratio with 1:3:6

11 kV Line : Reconductoring/Augmentation 11 KV line on Existing Pole

Reconductoring of 11 KV line with Covered Rabbit Conductor

11 KV AL-59 ACS XLPE (70sq mm)Rabbit Covered Conductor (SS4240813 & SS4240814) EN50397-1:2006 by Electron Beam radiation Process.Including Sag Percentage

11 kV Polymer Pin Insulator with Pin complete.

11 kV Compsite Polymer Disc Insulator B & S type

11 KV Class Ball and Socket Polymeric tension insulator with Hardware with tracking IPC.

IPC (70 sqmm MVCC to 70 sqmm MVCC) for 11 KV CC.

IPC (Bare Conductor to 70 sqmm MVCC) for 11 KV CC.

11 KV Insulated Cable Ties.

Supply IPC with Aluminium Bail for Earthing 3 No / Km(11KV)

11 KV Mid span Jointing Kit Suitable for 70 Sqmm Covered Conductor.

Single pole SP 55 as per annexure -J-21 A

Steel Tubular Poles 11 m long (STP 11.0 M, 410 MPa , SP-55) as per IS 2713 (Parts 1 to 3): 1980 (Bottom Portion hot dip galvanized) with MS Plate (300ɸx6)

V Type cross arm made of MS Channel 100X50X6mm complete with Clamps, Clamps, Nuts, Bolts & warshers all galvanized

F-Bracket made of MS Channel (100X50X6) mm with Clamps, Nuts, Bolts & Washers all galvanized

11 kV Polymer Pin Insulator with Pin complete.

11 KV Insulated Cable Ties.

Earth-wire clamp made of MS Flat 50x8mm with Nut & Bolts Warshers all galvanized.

11 kV Danger Board with GI clamp Bolts & Nuts

Anti-Climbing Device (2.5mm dia (12SWG) galvanized barbed wire 3.5 kg per pole) with 2 No. clamp made of 50x8 mm strip with Nuts, Bolts & Warshers all galvanized.

Aluminum paint (Double Coat)

Red Oxide paints

Concreting of Pole (CC ratio 1:3:6) and muffing (Kicking Block) (CC ratio 1:2:4) as per scope of work in SBD

Rod type earthing of pole by GI earthing rod 20ɸx2500mm with welded Clamp 40X3mm & GI wire 8 SWG (0.5 Kg) with Bolts Clamp, Washers & Nuts complete as per Drw. REC/RDSS/GEN/07 all Galvanized

Stay complete (As per annexure F-15)

Galvanized Stay Set Complete 16ϕX1800 mm. with 2 no. turn-buckle, anchor plate (200x200x6mm) as per scope of work in SBD All galvanized

GI Stay Wire 7/10 SWG

11 kV Stay Insulator as per SBD

Stay Clamp (50x8mm)with Nut, & Bolts all galvanized

Grouting with Cement Concreating ratio with 1:3:6

Dismantling of old conductor and accessories with opening of existing jumpering and making of bundle including Loading/Unloading Complete Work.

Reconductoring of 11 KV line with ACSR Dog Conductor

ACSR Dog Conductor with 3 % Sag

Additional Pole STP-33 for 11 KV line (As per Annex-J-10A)

Steel Tubular Poles 9 m long (STP 9.0 M, 410 MPa , SP-33) as per IS 2713 (Parts 1 to 3): 1980 (Bottom Portion hot dip galvanized) with MS Plate (300ɸx6)

V Type cross arm made of MS Channel 100X50X6mm complete with Clamps, Clamps, Nuts, Bolts & warshers all galvanized

F-Bracket made of MS Channel (100X50X6) mm with Clamps, Nuts, Bolts & Washers all galvanized

11 kV Polymer Pin Insulator with Pin complete.

Earth-wire clamp made of MS Flat 50x8mm with Nut & Bolts Warshers all galvanized.

11 kV Danger Board with clamp Bolts & Nuts

Anti-Climbing Device (2.5mm dia (12SWG) galvanized barbed wire 3.5 kg per pole) with 2 No. clamp made of 50x8 mm strip with Nuts, Bolts & Warshers all galvanized.

Aluminum Binding wire & tape

Aluminum paint (Double Coat)

Red Oxide paints

Concreting of Pole (CC ratio 1:3:6) and muffing (Kicking Block) (CC ratio 1:2:4) as per scope of work in SBD

Rod type earthing of pole by GI earthing rod 20ɸx2500mm with welded Clamp 40X3mm & GI wire 8 SWG (0.5 Kg) with Bolts Clamp, Washers & Nuts complete as per Drw. REC/RDSS/GEN/07 all Galvanized

Replacement of following damaged/wornout accessories

11 kV Compsite Polymer Disc Insulator B & S type

11 kV Disc Fittings B&S type 70 KN for ACSR Dog

11 kV Polymer Pin Insulator with Pin complete.

P.G. clamps for Raccoon conductor

Aluminum Binding wire & tape

Dismantling of old conductor and accessories with opening of existing jumpering and making of bundle including Loading/Unloading Complete Work.

Reconductoring of 11 KV line with ACSR Rabbit Conductor

ACSR Rabbit Conductor with 3 % Sag

Additional Pole STP-33 for 11 KV line (As per Annex-J-10A)

Steel Tubular Poles 9 m long (STP 9.0 M, 410 MPa , SP-33) as per IS 2713 (Parts 1 to 3): 1980 (Bottom Portion hot dip galvanized) with MS Plate (300ɸx6)

V Type cross arm made of MS Channel 100X50X6mm complete with Clamps, Clamps, Nuts, Bolts & warshers all galvanized

F-Bracket made of MS Channel (100X50X6) mm with Clamps, Nuts, Bolts & Washers all galvanized

11 kV Polymer Pin Insulator with Pin complete.

Earth-wire clamp made of MS Flat 50x8mm with Nut & Bolts Warshers all galvanized.

11 kV Danger Board with clamp Bolts & Nuts

Anti-Climbing Device (2.5mm dia (12SWG) galvanized barbed wire 3.5 kg per pole) with 2 No. clamp made of 50x8 mm strip with Nuts, Bolts & Warshers all galvanized.

Aluminum Binding wire & tape

Aluminum paint (Double Coat)

Red Oxide paints

Concreting of Pole (CC ratio 1:3:6) and muffing (Kicking Block) (CC ratio 1:2:4) as per scope of work in SBD

Rod type earthing of pole by GI earthing rod 20ɸx2500mm with welded Clamp 40X3mm & GI wire 8 SWG (0.5 Kg) with Bolts Clamp, Washers & Nuts complete as per Drw. REC/RDSS/GEN/07 all Galvanized

Replacement of following damaged/wornout accessories

11 kV Compsite Polymer Disc Insulator B & S type

11 kV Disc. Fittings B&S type 45 KN

11 kV Polymer Pin Insulator with Pin complete.

P.G. clamps for Rabbit conductor

Aluminum Binding wire & tape

Dismantling of old conductor and accessories with opening of existing jumpering and making of bundle including Loading/Unloading Complete Work.

New 11 KV Bay Extension

New 11 KV Bay with VCB (SCADA Compatible)

11KV, 1000A VCB Switchgear Panel indoor & incoming type complete with CTs of ratio 800/400/5A for incomer & 400/200/5A for outgoing of prescribed specifications & with panel mounted 11KV/110V PT & TVM consisting of

Incomer (SCADA Compatible)

Outgoing (SCADA Compatible)

Bus Coupler (SCADA Compatible)

11 KV GO switch, 630 A all galvanized.

9KV, 5KA Outdoor type Lighting Arrester Polymer.

11 kV Drop out fuse set for Transfoermer With MS Channel 100x50x6mm 1 no. 2.8 mtr. Long,PP , Clamp,Nuts&Bolts all galvanized

11KV, 3Cx300 Sq. mm. XLPE Cable from Transformer to incomer VCB & its laying in trench.

Heat Shrinkable jointing kit for 11 kV 3*300mm2 XLPE outdoor

Cable joining kit for 3Cx300 sq. mm. XLPE Cable Indoor type on Incomer VCB end.

11KV, 3Cx240 sq. mm. XLPE Cable for outgoing 11KV feeders & its laying including fixing of pipe and D/P end.

Cable Jointing Kit for 3Cx240 Sq. mm. XLPE Cable for outgoing Feeder, Indoor Type.

Heat Shrinkable jointing kit for 11 kV 3*240 Sq. mm. XLPE outdoor

LT Voltage Material

LT Control Cable

i) 2x2.5 Sq.mm

ii) 4x2.5 Sq.mm

iii) 10x2.5 Sq.mm

EARTH MAT/CIVIL WORK

G.I. Strip for earthing

a) 65mmx6mm galvanized

b) 45mm x 5 mm galvanized

Special earthing by treatment of soil with highly conducted material like combination of bentonite, conductive cement, coke dust, sodium carbonate, MgSo4, NaCl & CaCl2 as per ISS 3043-1987

MISCELANEOUS

MS (RS Joist, MS Channel, MS angle,Rail as per RESPO drawings enclosed) for Misc. structures for bus bar gantry, LA, CT, PT, PI, Isolators etc. as per drawings & design and site conditions including fabrication, welding, nut & bolt,etc.complete in all respect all galvanized.

ACSR Dog Conductor with 3 % Sag

11KV LINE MISCELLANIOUS MATERIALS

Outgoing 11kV Double Pole structure of SP-23 complete (as per M8)

Steel Tubular Poles 8.5 m long (STP 8.5 M, 410 MPa , SP-23) as per IS 2713 (Parts 1 to 3): 1980 (Bottom Portion hot dip galvanized) with MS Plate (300ɸx6)

11 kV top channel 100x50x6mm 2.2 mtr. Long with PP & clamp, nuts & bolt all galvanized as per SBD specs

Base Channel (100X50X6) 2.2 mtr. Long with Clamps and fittings as per SBD specs all galvanized.

11 kV Polymer Pin Insulator with Pin complete.

11 kV Compsite Polymer Disc Insulator B & S type

11 kV Disc Fittings B&S type 90/70 KN for ACSR Dog/Raccoon

11 kV Danger Board with GI clamp Bolts & Nuts

PG clamp/Wedge type for ACSR Dog/Raccoon / Rabbit

Aluminum paint (Double Coat)

Red Oxide paints

Anti-Climbing Device (2.5mm dia (12SWG) galvanized barbed wire 3.5 kg per pole) with 2 No. clamp made of 50x8 mm strip with Nuts, Bolts & Warshers all galvanized.

Concreting of Pole (CC ratio 1:3:6) and muffing (Kicking Block) (CC ratio 1:2:4) as per scope of work in SBD

Rod type earthing of pole by GI earthing rod 20ɸx2500mm with welded Clamp 40X3mm & GI wire 8 SWG (0.5 Kg) with Bolts Clamp, Washers & Nuts complete as per Drw. REC/RDSS/GEN/07 all Galvanized

Replacement of Old Aged VCBs/OCB

Replacement of 11KV Incomer complete with CTs of ratio 800/400/5A (SCADA Compatible)

11 kV VCB 500 MVA, 800/400/5A I/C (SCADA Compatible)

Dismantling of existing 11 KV VCB/OCB.

Replacement of 11KV Outgoing complete with CTs of ratio 400/200/5A (SCADA Compatible)

11 kV VCB FDR 500 MVA, 400/200/5A(Indoor Type) O/g (SCADA Compatible)

Dismantling of existing 11 KV VCB/OCB.

Replacement of 11KV Bus coupler with 11kV motorised Bus coupler (SCADA Compatible)

11 kV VCB FDR 500 MVA, Bus Coupler (SCADA Compatible)

Dismantling of existing 11 KV VCB/OCB.

Re-conductoring of bare LT line by LT ABC Replacement of LT Conductor with AB Cable in Theft Prone Areas

Replacement of LT Bare Conductor to AB Cable 3x120+1x95 Sqmm

Additional STP 8.5 M Pole SP 21 (As per Annexure K 10)

Steel Tubular Poles 8.5 m long (STP 8.5 M, 410 MPa , SP-21) as per IS 2713 (Parts 1 to 3): 1980 (Bottom Portion hot dip galvanized) with MS Plate (300ɸx6)

Suspension clamp assembly suitable for AB Cable with all fittings and S.S.strap

Concreting of Pole (CC ratio 1:3:6) and muffing (Kicking Block) (CC ratio 1:2:4) as per scope of work in SBD

Rod type earthing of pole by GI earthing rod 20ɸx2500mm with welded Clamp 40X3mm & GI wire 8 SWG (0.5 Kg) with Bolts Clamp, Washers & Nuts complete as per Drw. REC/RDSS/GEN/07 all Galvanized

Dead end clamp assembly suitable for AB Cable with all fittings and S.S.strap

Suspension clamp assembly suitable for AB Cable with all fittings and S.S.strap

L.T. Insulation Piercing Connectors for energizing distribution kiosk/box & Jumpering

Mid span jointing sleeves (120 Sq.mm.)

Supply & Fixing of LT distribution boxes/kiosk on the LT poles including all GI clamps & material required for mounting, connections & sealing.

Insulated ABC of 3x120+1x95 Sq.mm.

1x35 mm2 XLPE/PVC insulated Al. cable for energising the distribution boxes/ kiosks.

PG Connector/Wedge type/Wedge type 95 Sqmm.

LT Stay complete Annexure I-13

Galvanized Stay Set Complete 16ϕX1800 mm. with 2 no. turn-buckle, anchor plate (200x200x6mm) as per scope of work in SBD All galvanized

GI Stay Wire 7/10 SWG

LT Stay Insulator as per SBD

Stay Clamp (50x8mm)with Nut, & Bolts all galvanized

Grouting with Cement Concreating ratio with 1:3:6

Disconnecting of LT service line of consumers before dismantling of old LT line and the reconnections through distribution boxes/kiosk, supply & fixing of Clamp/Connectors etc for Consumer Service Cables after commissioning of ABC line.

Dismantling of existing conductor, shackle insulators, Clamps and accessories etc. from the existing poles with opening of existing jumpering and making of bundle including Loading/Unloading Complete Work.

Replacement of LT Bare Conductor to AB Cable 3x95+1x70 Sqmm

Additional STP 8.5 M Pole SP 21 (As per Annexure K 10)

Steel Tubular Poles 8.5 m long (STP 8.5 M, 410 MPa , SP-21) as per IS 2713 (Parts 1 to 3): 1980 (Bottom Portion hot dip galvanized) with MS Plate (300ɸx6)

Suspension clamp assembly suitable for AB Cable with all fittings and S.S.strap

Concreting of Pole (CC ratio 1:3:6) and muffing (Kicking Block) (CC ratio 1:2:4) as per scope of work in SBD

Rod type earthing of pole by GI earthing rod 20ɸx2500mm with welded Clamp 40X3mm & GI wire 8 SWG (0.5 Kg) with Bolts Clamp, Washers & Nuts complete as per Drw. REC/RDSS/GEN/07 all Galvanized

Dead end clamp assembly suitable for AB Cable with all fittings and S.S.strap

Suspension clamp assembly suitable for AB Cable with all fittings and S.S.strap

L.T. Insulation Piercing Connectors for energizing distribution kiosk/box & Jumpering

Mid span jointing sleeves (95 Sq.mm.)

Supply & Fixing of LT distribution boxes/kiosk on the LT poles including all GI clamps & material required for mounting, connections & sealing.

Insulated ABC of 3x95+1x70 Sq.mm.

1x35 mm2 XLPE/PVC insulated Al. cable for energising the distribution boxes/ kiosks.

PG Connector/Wedge type/Wedge type 70 Sqmm.

LT Stay complete Annexure I-13

Galvanized Stay Set Complete 16ϕX1800 mm. with 2 no. turn-buckle, anchor plate (200x200x6mm) as per scope of work in SBD All galvanized

GI Stay Wire 7/10 SWG

LT Stay Insulator as per SBD

Stay Clamp (50x8mm)with Nut, & Bolts all galvanized

Grouting with Cement Concreating ratio with 1:3:6

Disconnecting of LT service line of consumers before dismantling of old LT line and the reconnections through distribution boxes/kiosk, supply & fixing of Clamp/Connectors etc for Consumer Service Cables after commissioning of ABC line.

Dismantling of existing conductor, shackle insulators, Clamps and accessories etc. from the existing poles with opening of existing jumpering and making of bundle including Loading/Unloading Complete Work.

Replacement of LT Bare Conductor to AB Cable 3x70+1x50 Sqmm

Additional STP 8.5 M Pole SP 21 (As per Annexure K 10)

Steel Tubular Poles 8.5 m long (STP 8.5 M, 410 MPa , SP-21) as per IS 2713 (Parts 1 to 3): 1980 (Bottom Portion hot dip galvanized) with MS Plate (300ɸx6)

Suspension clamp assembly suitable for AB Cable with all fittings and S.S.strap

Concreting of Pole (CC ratio 1:3:6) and muffing (Kicking Block) (CC ratio 1:2:4) as per scope of work in SBD

Rod type earthing of pole by GI earthing rod 20ɸx2500mm with welded Clamp 40X3mm & GI wire 8 SWG (0.5 Kg) with Bolts Clamp, Washers & Nuts complete as per Drw. REC/RDSS/GEN/07 all Galvanized

Dead end clamp assembly suitable for AB Cable with all fittings and S.S.strap

Suspension clamp assembly suitable for AB Cable with all fittings and S.S.strap

L.T. Insulation Piercing Connectors for energizing distribution kiosk/box & Jumpering

Mid span jointing sleeves (70 Sq.mm.)

Supply & Fixing of LT distribution boxes/kiosk on the LT poles including all GI clamps & material required for mounting, connections & sealing.

Insulated ABC of 3x70+1x50 Sq.mm.

1x35 mm2 XLPE/PVC insulated Al. cable for energising the distribution boxes/ kiosks.

PG Connector/Wedge type 50 Sqmm.

LT Stay complete Annexure I-13

Galvanized Stay Set Complete 16ϕX1800 mm. with 2 no. turn-buckle, anchor plate (200x200x6mm) as per scope of work in SBD All galvanized

GI Stay Wire 7/10 SWG

LT Stay Insulator as per SBD

Stay Clamp (50x8mm)with Nut, & Bolts all galvanized

Grouting with Cement Concreating ratio with 1:3:6

Disconnecting of LT service line of consumers before dismantling of old LT line and the reconnections through distribution boxes/kiosk, supply & fixing of Clamp/Connectors etc for Consumer Service Cables after commissioning of ABC line.

Dismantling of existing conductor, shackle insulators, Clamps and accessories etc. from the existing poles with opening of existing jumpering and making of bundle including Loading/Unloading Complete Work.

Replacement of Old /Frayed LT AB Cable

Reconductoring of LT AB Cable 3x120+1x95 Sqmm

Additional STP 8.5 M Pole SP 21 (As per Annexure K 10)

Steel Tubular Poles 8.5 m long (STP 8.5 M, 410 MPa , SP-21) as per IS 2713 (Parts 1 to 3): 1980 (Bottom Portion hot dip galvanized) with MS Plate (300ɸx6)

Suspension clamp assembly suitable for AB Cable with all fittings and S.S.strap

Concreting of Pole (CC ratio 1:3:6) and muffing (Kicking Block) (CC ratio 1:2:4) as per scope of work in SBD

Rod type earthing of pole by GI earthing rod 20ɸx2500mm with welded Clamp 40X3mm & GI wire 8 SWG (0.5 Kg) with Bolts Clamp, Washers & Nuts complete as per Drw. REC/RDSS/GEN/07 all Galvanized

Dead end clamp assembly suitable for AB Cable with all fittings and S.S.strap

Suspension clamp assembly suitable for AB Cable with all fittings and S.S.strap

L.T. Insulation Piercing Connectors for energizing distribution kiosk/box & Jumpering

Mid span jointing sleeves (120 Sq.mm.)

Supply & Fixing of LT distribution boxes/kiosk on the LT poles including all GI clamps & material required for mounting, connections & sealing.

Insulated ABC of 3x120+1x95 Sq.mm.

1x35 mm2 XLPE/PVC insulated Al. cable for energising the distribution boxes/ kiosks.

PG Connector/Wedge type/Wedge type 95 Sqmm.

LT Stay complete Annexure I-13

Galvanized Stay Set Complete 16ϕX1800 mm. with 2 no. turn-buckle, anchor plate (200x200x6mm) as per scope of work in SBD All galvanized

GI Stay Wire 7/10 SWG

LT Stay Insulator as per SBD

Stay Clamp (50x8mm)with Nut, & Bolts all galvanized

Grouting with Cement Concreating ratio with 1:3:6

Disconnecting of LT service line of consumers before dismantling of old LT line and the reconnections through distribution boxes/kiosk, supply & fixing of Clamp/Connectors etc for Consumer Service Cables after commissioning of ABC line.

Dismantling of existing conductor, shackle insulators, Clamps and accessories etc. from the existing poles with opening of existing jumpering and making of bundle including Loading/Unloading Complete Work.

Reconductoring of LT AB Cable 3x95+1x70 Sqmm

Additional STP 8.5 M Pole SP 21 (As per Annexure K 10)

Steel Tubular Poles 8.5 m long (STP 8.5 M, 410 MPa , SP-21) as per IS 2713 (Parts 1 to 3): 1980 (Bottom Portion hot dip galvanized) with MS Plate (300ɸx6)

Suspension clamp assembly suitable for AB Cable with all fittings and S.S.strap

Concreting of Pole (CC ratio 1:3:6) and muffing (Kicking Block) (CC ratio 1:2:4) as per scope of work in SBD

Rod type earthing of pole by GI earthing rod 20ɸx2500mm with welded Clamp 40X3mm & GI wire 8 SWG (0.5 Kg) with Bolts Clamp, Washers & Nuts complete as per Drw. REC/RDSS/GEN/07 all Galvanized

Dead end clamp assembly suitable for AB Cable with all fittings and S.S.strap

Suspension clamp assembly suitable for AB Cable with all fittings and S.S.strap

L.T. Insulation Piercing Connectors for energizing distribution kiosk/box & Jumpering

Mid span jointing sleeves (95 Sq.mm.)

Supply & Fixing of LT distribution boxes/kiosk on the LT poles including all GI clamps & material required for mounting, connections & sealing.

Insulated ABC of 3x95+1x70 Sq.mm.

1x35 mm2 XLPE/PVC insulated Al. cable for energising the distribution boxes/ kiosks.

PG Connector/Wedge type/Wedge type 70 Sqmm.

LT Stay complete Annexure I-13

Galvanized Stay Set Complete 16ϕX1800 mm. with 2 no. turn-buckle, anchor plate (200x200x6mm) as per scope of work in SBD All galvanized

GI Stay Wire 7/10 SWG

LT Stay Insulator as per SBD

Stay Clamp (50x8mm)with Nut, & Bolts all galvanized

Grouting with Cement Concreating ratio with 1:3:6

Disconnecting of LT service line of consumers before dismantling of old LT line and the reconnections through distribution boxes/kiosk, supply & fixing of Clamp/Connectors etc for Consumer Service Cables after commissioning of ABC line.

Dismantling of existing conductor, shackle insulators, Clamps and accessories etc. from the existing poles with opening of existing jumpering and making of bundle including Loading/Unloading Complete Work.

Reconductoring of LT AB Cable 3x70+1x50 Sqmm

Additional STP 8.5 M Pole SP 21 (As per Annexure K 10)

Steel Tubular Poles 8.5 m long (STP 8.5 M, 410 MPa , SP-21) as per IS 2713 (Parts 1 to 3): 1980 (Bottom Portion hot dip galvanized) with MS Plate (300ɸx6)

Suspension clamp assembly suitable for AB Cable with all fittings and S.S.strap

Concreting of Pole (CC ratio 1:3:6) and muffing (Kicking Block) (CC ratio 1:2:4) as per scope of work in SBD

Rod type earthing of pole by GI earthing rod 20ɸx2500mm with welded Clamp 40X3mm & GI wire 8 SWG (0.5 Kg) with Bolts Clamp, Washers & Nuts complete as per Drw. REC/RDSS/GEN/07 all Galvanized

Dead end clamp assembly suitable for AB Cable with all fittings and S.S.strap

Suspension clamp assembly suitable for AB Cable with all fittings and S.S.strap

L.T. Insulation Piercing Connectors for energizing distribution kiosk/box & Jumpering

Mid span jointing sleeves (70 Sq.mm.)

Supply & Fixing of LT distribution boxes/kiosk on the LT poles including all GI clamps & material required for mounting, connections & sealing.

Insulated ABC of 3x70+1x50 Sq.mm.

1x35 mm2 XLPE/PVC insulated Al. cable for energising the distribution boxes/ kiosks.

PG Connector/Wedge type 50 Sqmm.

LT Stay complete Annexure I-13

Galvanized Stay Set Complete 16ϕX1800 mm. with 2 no. turn-buckle, anchor plate (200x200x6mm) as per scope of work in SBD All galvanized

GI Stay Wire 7/10 SWG

LT Stay Insulator as per SBD

Stay Clamp (50x8mm)with Nut, & Bolts all galvanized

Grouting with Cement Concreating ratio with 1:3:6

Disconnecting of LT service line of consumers before dismantling of old LT line and the reconnections through distribution boxes/kiosk, supply & fixing of Clamp/Connectors etc for Consumer Service Cables after commissioning of ABC line.

Dismantling of existing conductor, shackle insulators, Clamps and accessories etc. from the existing poles with opening of existing jumpering and making of bundle including Loading/Unloading Complete Work.

Reconductoring of LT AB Cable 1x16+1x25 Sqmm

Additional STP 8.5 M Pole SP 21 (As per Annexure K 10)

Steel Tubular Poles 8.5 m long (STP 8.5 M, 410 MPa , SP-21) as per IS 2713 (Parts 1 to 3): 1980 (Bottom Portion hot dip galvanized) with MS Plate (300ɸx6)

Suspension clamp assembly suitable for AB Cable with all fittings and S.S.strap

Concreting of Pole (CC ratio 1:3:6) and muffing (Kicking Block) (CC ratio 1:2:4) as per scope of work in SBD

Rod type earthing of pole by GI earthing rod 20ɸx2500mm with welded Clamp 40X3mm & GI wire 8 SWG (0.5 Kg) with Bolts Clamp, Washers & Nuts complete as per Drw. REC/RDSS/GEN/07 all Galvanized

Dead end clamp assembly suitable for AB Cable with all fittings and S.S.strap

Suspension clamp assembly suitable for AB Cable with all fittings and S.S.strap

L.T. Insulation Piercing Connectors for energizing distribution kiosk/box & Jumpering

Mid span jointing sleeves (16 Sq.mm.)

Supply & Fixing of LT distribution boxes/kiosk on the LT poles including all GI clamps & material required for mounting, connections & sealing.

Insulated ABC of 1x16+1x25 Sq.mm.

1x16 mm2 XLPE/PVC insulated Al. cable for energising the distribution boxes/ kiosks/Street light.

PG Connector/Wedge type 25 Sqmm.

LT Stay complete Annexure I-13

Galvanized Stay Set Complete 16ϕX1800 mm. with 2 no. turn-buckle, anchor plate (200x200x6mm) as per scope of work in SBD All galvanized

GI Stay Wire 7/10 SWG

LT Stay Insulator as per SBD

Stay Clamp (50x8mm)with Nut, & Bolts all galvanized

Grouting with Cement Concreating ratio with 1:3:6

Disconnecting of LT service line of consumers before dismantling of old LT line and the reconnections through distribution boxes/kiosk, supply & fixing of Clamp/Connectors etc for Consumer Service Cables after commissioning of ABC line.

Dismantling of existing conductor, shackle insulators, Clamps and accessories etc. from the existing poles with opening of existing jumpering and making of bundle including Loading/Unloading Complete Work.

Replacement of Old /Frayed Conductor

Reconductoring of 3Ph 4w with ACSR Rabbit Conductor

Steel Tubular Poles 8.5 m long (STP 8.5 M, 410 MPa , SP-21) as per IS 2713 (Parts 1 to 3): 1980 (Bottom Portion hot dip galvanized) with MS Plate (300ɸx6)

LT Four Pin cross arm nut & Bolt all galvanized.

LT Shackle Insulator (90x75 mm)

Earth knob (Aluminium bobbin)

Shackle insulator GI clamp with accessories for 90x75 mm shackle insulator

ACSR conductor including 3% sag

ACSR Rabbit Conductor with 3 % Sag

ACSR Weasel Conductor with 3 % Sag

Concreting of Pole (CC ratio 1:3:6) and muffing (Kicking Block) (CC ratio 1:2:4) as per scope of work in SBD

Rod type earthing of pole by GI earthing rod 20ɸx2500mm with welded Clamp 40X3mm & GI wire 8 SWG (0.5 Kg) with Bolts Clamp, Washers & Nuts complete as per Drw. REC/RDSS/GEN/07 all Galvanized

Aluminum paint (Double Coat)

Red Oxide paints

Dismantling of existing conductor, shackle insulators, Clamps and accessories etc. from the existing poles with opening of existing jumpering and making of bundle including Loading/Unloading Complete Work.

Replacement of Aged DTR Structures

250 KVA To Above

Steel Tubular Poles 11 m long (STP 11.0 M, 410 MPa , SP-55) as per IS 2713 (Parts 1 to 3): 1980 (Bottom Portion hot dip galvanized) with MS Plate (300ɸx6)

Plinth of T/F with RCC Top of size 2x4x1.6 Mtr. Incl. 2 nos. MS Channel All Galvanized as per SBD

Clamps for LT Take off with bolts and nuts all galvanized.

MS Channel 100x50x6mm, 2.800mtr. long (Top Channel) with all fixing arrangment PP, Clamps, Nuts & Bolts all galvanized as per SBD specs

MS Channel 100x50x6mm, 1.300 mtr. long (Tee off) with PP,clamp, Bolt and nuts all galvanized as per SBD specs

11 kV Compsite Polymer Disc Insulator B & S type

11 kV Disc. Fittings B&S type 45 KN

11 kV, 3-ph, 400 A, 3 Pin type, Horizontal/Vertical Mounting type, Gang Operated, AB Switch with 2 Nos. MS channel 100x50x6mm PP, clamps ,Bolt and nuts all galvanized as per SBD specs

11 kV Drop out fuse set for Transfoermer With MS Channel 100x50x6mm 1 no. 2.8 mtr. Long,PP , Clamp,Nuts&Bolts all galvanized

11 kV Polymer Pin Insulator with Pin complete.

ACSR Rabbit Conductor with 3 % Sag

Anti-Climbing Device (2.5mm dia (12SWG) galvanized barbed wire 3.5 kg per pole) with 2 No. clamp made of 50x8 mm strip with Nuts, Bolts & Warshers all galvanized.

11 kV Danger Board with GI clamp Bolts & Nuts

9KV, 5KA Outdoor type Lighting Arrester Polymer.

Chemical Earthing(with GI Strip 25x3mm for Neutral Earthing of Transformer

Chemical Earthing of Transformer Body(with GI strip 25x3mm),Other structure& Equipment( with GI Wire of 8 SWG)

Chemical Earthing of Lightning Arrestor with GI Strip 25x3mm

Aluminum lugs HT side

Aluminum crimping lugs LT side

1*240 Sq.mm.,single core `XLPE insulated un-armoured aluminium conductor cable

1*400 Sq.mm.,single core `XLPE insulated un-armoured aluminium conductor cable

fencing with gate as per specification and Turfing

Red Oxide paints

Aluminum paint (Double Coat)

Concreting of Pole (CC ratio 1:3:6) and muffing (Kicking Block) (CC ratio 1:2:4) as per scope of work in SBD

Stays Complete (As Per Annex. F-15 )

Galvanized Stay Set Complete 16ϕX1800 mm. with 2 no. turn-buckle, anchor plate (200x200x6mm) as per scope of work in SBD All galvanized

GI Stay Wire 7/10 SWG

11 kV Stay Insulator as per SBD

Stay Clamp (50x8mm)with Nut, & Bolts all galvanized

Grouting with Cement Concreating ratio with 1:3:6

Dismantling of Aged DTR Structure with all worn out Accessories including Loading/Unloading Complete Work.

100 KVA & 160 KVA

Steel Tubular Poles 11 m long (STP 11.0 M, 410 MPa , SP-55) as per IS 2713 (Parts 1 to 3): 1980 (Bottom Portion hot dip galvanized) with MS Plate (300ɸx6)

Clamps for LT Take off with bolts and nuts all galvanized.

MS Channel 100x50x6mm, 2.800mtr. long (Top Channel) with all fixing arrangment PP, Clamps, Nuts & Bolts all galvanized as per SBD specs

MS Channel 100x50x6mm, 1.300 mtr. long (Tee off) with PP,clamp, Bolt and nuts all galvanized as per SBD specs

MS Channel 100x50x6mm, 2.800 mtr. Long (for Transformer Base) with all fixing arrangment PP,Clamps,Nuts & Bolts all galvanized as per SBD specs

11 kV, 3-ph, 400 A, 3 Pin type, Horizontal/Vertical Mounting type, Gang Operated, AB Switch with 2 Nos. MS channel 100x50x6mm PP, clamps ,Bolt and nuts all galvanized as per SBD specs

Transformer Belting Angle 50X50X6mm with all fixing arrangment PP,Clamps,Nuts & Bolts all galvanized.

11 kV Drop out fuse set for Transfoermer With MS Channel 100x50x6mm 1 no. 2.8 mtr. Long,PP , Clamp,Nuts&Bolts all galvanized

11 kV Polymer Pin Insulator with Pin complete.

11 kV Compsite Polymer Disc Insulator B & S type

11 kV Disc. Fittings B&S type 45 KN

ACSR Rabbit Conductor with 3 % Sag

Anti-Climbing Device (2.5mm dia (12SWG) galvanized barbed wire 3.5 kg per pole) with 2 No. clamp made of 50x8 mm strip with Nuts, Bolts & Warshers all galvanized.

11 kV Danger Board with GI clamp Bolts & Nuts

9KV, 5KA Outdoor type Lighting Arrester Polymer.

Chemical Earthing(with GI Strip 25x3mm for Neutral Earthing of Transformer

Chemical Earthing of Transformer Body(with GI strip 25x3mm),Other structure& Equipment( with GI Wire of 8 SWG)

Chemical Earthing of Lightning Arrestor with GI Strip 25x3mm

Aluminum lugs HT side

Aluminum crimping lugs LT side

70 Sq.mm.,single core `XLPE insulated un-armoured aluminium conductor cable

120 Sq.mm.,single core `XLPE insulated un-armoured aluminium conductor cable

Concreting of Pole (CC ratio 1:3:6) and muffing (Kicking Block) (CC ratio 1:2:4) as per scope of work in SBD

Red Oxide paints

Aluminum paint (Double Coat)

Stays Complete (As Per Annex. F-15 )

Galvanized Stay Set Complete 16ϕX1800 mm. with 2 no. turn-buckle, anchor plate (200x200x6mm) as per scope of work in SBD All galvanized

GI Stay Wire 7/10 SWG

11 kV Stay Insulator as per SBD

Stay Clamp (50x8mm)with Nut, & Bolts all galvanized

Grouting with Cement Concreating ratio with 1:3:6

Dismantling of Aged DTR Structure with all worn out Accessories including Loading/Unloading Complete Work.

Steel Tubular Poles 11 m long (STP 11.0 M, 410 MPa , SP-55) as per IS 2713 (Parts 1 to 3): 1980 (Bottom Portion hot dip galvanized) with MS Plate (300ɸx6)

Clamps for LT Take off with bolts and nuts all galvanized.

MS Channel 100x50x6mm, 2.800mtr. long (Top Channel) with all fixing arrangment PP, Clamps, Nuts & Bolts all galvanized as per SBD specs

MS Channel 100x50x6mm, 1.300 mtr. long (Tee off) with PP,clamp, Bolt and nuts all galvanized as per SBD specs

MS Channel 100x50x6mm, 2.800 mtr. Long (for Transformer Base) with all fixing arrangment PP,Clamps,Nuts & Bolts all galvanized as per SBD specs

11 kV, 3-ph, 400 A, 3 Pin type, Horizontal/Vertical Mounting type, Gang Operated, AB Switch with 2 Nos. MS channel 100x50x6mm PP, clamps ,Bolt and nuts all galvanized as per SBD specs

Transformer Belting Angle 50X50X6mm with all fixing arrangment PP,Clamps,Nuts & Bolts all galvanized.

11 kV Drop out fuse set for Transfoermer With MS Channel 100x50x6mm 1 no. 2.8 mtr. Long,PP , Clamp,Nuts&Bolts all galvanized

11 kV Polymer Pin Insulator with Pin complete.

11 kV Compsite Polymer Disc Insulator B & S type

11 kV Disc. Fittings B&S type 45 KN

ACSR Rabbit Conductor with 3 % Sag

Anti-Climbing Device (2.5mm dia (12SWG) galvanized barbed wire 3.5 kg per pole) with 2 No. clamp made of 50x8 mm strip with Nuts, Bolts & Warshers all galvanized.

11 kV Danger Board with GI clamp Bolts & Nuts

9KV, 5KA Outdoor type Lighting Arrester Polymer.

Chemical Earthing(with GI Strip 25x3mm for Neutral Earthing of Transformer

Chemical Earthing of Transformer Body(with GI strip 25x3mm),Other structure& Equipment( with GI Wire of 8 SWG)

Chemical Earthing of Lightning Arrestor with GI Strip 25x3mm

Aluminum lugs HT side

Aluminum crimping lugs LT side

70 Sq.mm.,single core `XLPE insulated un-armoured aluminium conductor cable

Concreting of Pole (CC ratio 1:3:6) and muffing (Kicking Block) (CC ratio 1:2:4) as per scope of work in SBD

Red Oxide paints

Aluminum paint (Double Coat)

Stays Complete (As Per Annex. F-15 )

Galvanized Stay Set Complete 16ϕX1800 mm. with 2 no. turn-buckle, anchor plate (200x200x6mm) as per scope of work in SBD All galvanized

GI Stay Wire 7/10 SWG

11 kV Stay Insulator as per SBD

Stay Clamp (50x8mm)with Nut, & Bolts all galvanized

Grouting with Cement Concreating ratio with 1:3:6

Dismantling of Aged DTR Structure with all worn out Accessories including Loading/Unloading Complete Work.

Steel Tubular Poles 11 m long (STP 11.0 M, 410 MPa , SP-55) as per IS 2713 (Parts 1 to 3): 1980 (Bottom Portion hot dip galvanized) with MS Plate (300ɸx6)

Clamps for LT Take off with bolts and nuts all galvanized.

MS Channel 100x50x6mm, 2.800mtr. long (Top Channel) with all fixing arrangment PP, Clamps, Nuts & Bolts all galvanized as per SBD specs

MS Channel 100x50x6mm, 1.300 mtr. long (Tee off) with PP,clamp, Bolt and nuts all galvanized as per SBD specs

MS Channel 100x50x6mm, 2.800 mtr. Long (for Transformer Base) with all fixing arrangment PP,Clamps,Nuts & Bolts all galvanized as per SBD specs

11 kV, 3-ph, 400 A, 3 Pin type, Horizontal/Vertical Mounting type, Gang Operated, AB Switch with 2 Nos. MS channel 100x50x6mm PP, clamps ,Bolt and nuts all galvanized as per SBD specs

Transformer Belting Angle 50X50X6mm with all fixing arrangment PP,Clamps,Nuts & Bolts all galvanized.

11 kV Drop out fuse set for Transfoermer With MS Channel 100x50x6mm 1 no. 2.8 mtr. Long,PP , Clamp,Nuts&Bolts all galvanized

11 kV Polymer Pin Insulator with Pin complete.

11 kV Compsite Polymer Disc Insulator B & S type

11 kV Disc. Fittings B&S type 45 KN

ACSR Rabbit Conductor with 3 % Sag

Anti-Climbing Device (2.5mm dia (12SWG) galvanized barbed wire 3.5 kg per pole) with 2 No. clamp made of 50x8 mm strip with Nuts, Bolts & Warshers all galvanized.

11 kV Danger Board with GI clamp Bolts & Nuts

9KV, 5KA Outdoor type Lighting Arrester Polymer.

Chemical Earthing(with GI Strip 25x3mm for Neutral Earthing of Transformer

Chemical Earthing of Transformer Body(with GI strip 25x3mm),Other structure& Equipment( with GI Wire of 8 SWG)

Chemical Earthing of Lightning Arrestor with GI Strip 25x3mm

Aluminum lugs HT side

Aluminum crimping lugs LT side

35 Sq.mm.,single core `XLPE insulated un-armoured aluminium conductor cable

Concreting of Pole (CC ratio 1:3:6) and muffing (Kicking Block) (CC ratio 1:2:4) as per scope of work in SBD

Red Oxide paints

Aluminum paint (Double Coat)

Stays Complete (As Per Annex. F-15 )

Galvanized Stay Set Complete 16ϕX1800 mm. with 2 no. turn-buckle, anchor plate (200x200x6mm) as per scope of work in SBD All galvanized

GI Stay Wire 7/10 SWG

11 kV Stay Insulator as per SBD

Stay Clamp (50x8mm)with Nut, & Bolts all galvanized

Grouting with Cement Concreating ratio with 1:3:6

Dismantling of Aged DTR Structure with all worn out Accessories including Loading/Unloading Complete Work.

Replacement of Damaged Pole's

33KV feeders

STP Pole SP-55

Steel Tubular Poles 11 m long (STP 11.0 M, 410 MPa , SP-55) as per IS 2713 (Parts 1 to 3): 1980 (Bottom Portion hot dip galvanized) with MS Plate (300ɸx6)

Aluminum Binding wire & tape

Aluminum paint (Double Coat)

Red Oxide paints

Concreting of Pole (CC ratio 1:3:6) and muffing (Kicking Block) (CC ratio 1:2:4) as per scope of work in SBD

Dismantling of existing Pole, Clamps, insulator and accessories etc. including Loading/Unloading Complete Work.

9.0 M PCC Poles

PCC Pole 9.0 Mtrs. Long

Rod type earthing of pole by GI earthing rod 20ɸx2500mm with welded Clamp 40X3mm & GI wire 8 SWG (0.5 Kg) with Bolts Clamp, Washers & Nuts complete as per Drw. REC/RDSS/GEN/07 all Galvanized

Dismantling of existing Pole, Clamps, insulator and accessories etc. including Loading/Unloading Complete Work.

11KV feeders

ST POLE SP-33

Steel Tubular Poles 9 m long (STP 9.0 M, 410 MPa , SP-33) as per IS 2713 (Parts 1 to 3): 1980 (Bottom Portion hot dip galvanized) with MS Plate (300ɸx6)

Aluminum Binding wire & tape

Aluminum paint (Double Coat)

Red Oxide paints

Concreting of Pole (CC ratio 1:3:6) and muffing (Kicking Block) (CC ratio 1:2:4) as per scope of work in SBD

Dismantling of existing Pole, Clamps, insulator and accessories etc. including Loading/Unloading Complete Work.

ST POLE SP-23

Steel Tubular Poles 8.5 m long (STP 8.5 M, 410 MPa , SP-23) as per IS 2713 (Parts 1 to 3): 1980 (Bottom Portion hot dip galvanized) with MS Plate (300ɸx6)

Aluminum Binding wire & tape

Aluminum paint (Double Coat)

Red Oxide paints

Concreting of Pole (CC ratio 1:3:6) and muffing (Kicking Block) (CC ratio 1:2:4) as per scope of work in SBD

Dismantling of existing Pole, Clamps, insulator and accessories etc. including Loading/Unloading Complete Work.

9.0 M PCC Poles

PCC Pole 9.0 Mtrs. Long

Rod type earthing of pole by GI earthing rod 20ɸx2500mm with welded Clamp 40X3mm & GI wire 8 SWG (0.5 Kg) with Bolts Clamp, Washers & Nuts complete as per Drw. REC/RDSS/GEN/07 all Galvanized

Dismantling of existing Pole, Clamps, insulator and accessories etc. including Loading/Unloading Complete Work.

8.5 M PSCC poles

PCC Pole 8.5 Mtrs. Long

Rod type earthing of pole by GI earthing rod 20ɸx2500mm with welded Clamp 40X3mm & GI wire 8 SWG (0.5 Kg) with Bolts Clamp, Washers & Nuts complete as per Drw. REC/RDSS/GEN/07 all Galvanized

Dismantling of existing Pole, Clamps, insulator and accessories etc. including Loading/Unloading Complete Work.

LT Lines

STP Pole SP-21

Steel Tubular Poles 8.5 m long (STP 8.5 M, 410 MPa , SP-21) as per IS 2713 (Parts 1 to 3): 1980 (Bottom Portion hot dip galvanized) with MS Plate (300ɸx6)

Concreting of Pole (CC ratio 1:3:6) and muffing (Kicking Block) (CC ratio 1:2:4) as per scope of work in SBD

Aluminum paint (Double Coat)

Red Oxide paints

Rod type earthing of pole by GI earthing rod 20ɸx2500mm with welded Clamp 40X3mm & GI wire 8 SWG (0.5 Kg) with Bolts Clamp, Washers & Nuts complete as per Drw. REC/RDSS/GEN/07 all Galvanized

Dismantling of existing Pole, Clamps, insulator and accessories etc. including Loading/Unloading Complete Work.

8.5 M PSCC poles

PCC Pole 8.5 Mtrs. Long

Rod type earthing of pole by GI earthing rod 20ɸx2500mm with welded Clamp 40X3mm & GI wire 8 SWG (0.5 Kg) with Bolts Clamp, Washers & Nuts complete as per Drw. REC/RDSS/GEN/07 all Galvanized

Dismantling of existing Pole, Clamps, insulator and accessories etc. including Loading/Unloading Complete Work.

Damaged Double Poles structures

33 KV Line DPs

Steel Tubular Poles 11 m long (STP 11.0 M, 410 MPa , SP-55) as per IS 2713 (Parts 1 to 3): 1980 (Bottom Portion hot dip galvanized) with MS Plate (300ɸx6)

33 kV top channel 125x65x6mm 3.2 mtr. Long with all fixing arrngement, PP, Clamp, bolts & nuts all galvanized.

33 KV Cross bracing Set 50x50x6mm with Belting angle of 65x65x6mm with clamps bolts & nuts all galvanized, as per SBD

33 kV Polymeric Pin Insulator complete

GI Fish Plate 50x8mm for 33 kv DP.

33kV Disc fitting for Panther/Dog/Raccoon/Rabbit conductor 90/70/45 KN B&S type

33 kV Composite Polymer Disc Insulator B & S type

Earth-wire clamp made of MS Flat 50x8mm with Nut & Bolts Warshers all galvanized.

33 kV Danger board with GI clamp Bolts & Nuts.

PG clamp/Wedge type for HTLS/Panther/Dog / Racoon conductor

Stay complete (As per Annex-C-18)

33 kV Galvanized Stay Set Complete 20ϕX1800 mm. with 2 no. turn-buckles, anchor plate (300x300x8mm) as per scope of work in SBD All galvanized

Stay Wire 7/8 SWG

33kv Stay Insulator

Stay Clamp (50x8mm)with Nut, & Bolts all galvanized

Grouting with Cement Concreating ratio with 1:3:6

Aluminum Binding wire & tape

Aluminum paint (Double Coat)

Red Oxide paints

Anti-Climbing Device (2.5mm dia (12SWG) galvanized barbed wire 3.5 kg per pole) with 2 No. clamp made of 50x8 mm strip with Nuts, Bolts & Warshers all galvanized.

Concreting of Pole (CC ratio 1:3:6) and muffing (Kicking Block) (CC ratio 1:2:4) as per scope of work in SBD

Rod type earthing of pole by GI earthing rod 20ɸx2500mm with welded Clamp 40X3mm & GI wire 8 SWG (0.5 Kg) with Bolts Clamp, Washers & Nuts complete as per Drw. REC/RDSS/GEN/07 all Galvanized

Dismantling of existing Pole, Clamps, insulator and accessories etc. including Loading/Unloading Complete Work.

11 KV Line DPs

Steel Tubular Poles 11 m long (STP 11.0 M, 410 MPa , SP-55) as per IS 2713 (Parts 1 to 3): 1980 (Bottom Portion hot dip galvanized) with MS Plate (300ɸx6)

11 kV top channel 100x50x6mm 2.2 mtr. Long with PP & clamp, nuts & bolt all galvanized as per SBD specs

11 KV Cross bracing Set 50x50x6mm with Belting angle of 65x65x6mm with clamps bolts & nuts all galvanized, as per SBD

11 kV Polymer Pin Insulator with Pin complete.

GI Fish Plate 50x8mm for 11 kv DP

11 kV Compsite Polymer Disc Insulator B & S type

11 kV Disc Fittings B&S type 90/70 KN for ACSR Dog/Raccoon

11 kV Danger Board with GI clamp Bolts & Nuts

PG clamp/Wedge type for ACSR Dog/Raccoon / Rabbit

Stay complete (As per Annex-C-18)

33 kV Galvanized Stay Set Complete 20ϕX1800 mm. with 2 no. turn-buckles, anchor plate (300x300x8mm) as per scope of work in SBD All galvanized

Stay Wire 7/8 SWG

33kv Stay Insulator

Stay Clamp (50x8mm)with Nut, & Bolts all galvanized

Grouting with Cement Concreating ratio with 1:3:6

Aluminum Binding wire & tape

Aluminum paint (Double Coat)

Red Oxide paints

Anti-Climbing Device (2.5mm dia (12SWG) galvanized barbed wire 3.5 kg per pole) with 2 No. clamp made of 50x8 mm strip with Nuts, Bolts & Warshers all galvanized.

Concreting of Pole (CC ratio 1:3:6) and muffing (Kicking Block) (CC ratio 1:2:4) as per scope of work in SBD

Rod type earthing of pole by GI earthing rod 20ɸx2500mm with welded Clamp 40X3mm & GI wire 8 SWG (0.5 Kg) with Bolts Clamp, Washers & Nuts complete as per Drw. REC/RDSS/GEN/07 all Galvanized

Dismantling of existing Double Pole, Clamps, insulator Structure and accessories etc. including Loading/Unloading Complete Work.

Damaged Four Poles structures

33 KV 4 pole structure

Steel Tubular Poles 11 m long (STP 11.0 M, 410 MPa , SP-55) as per IS 2713 (Parts 1 to 3): 1980 (Bottom Portion hot dip galvanized) with MS Plate (300ɸx6)

33 kV top channel 125x65x6mm 3.2 mtr. Long with all fixing arrngement, PP, Clamp, bolts & nuts all galvanized.

33 KV Cross bracing Set 50x50x6mm with Belting angle of 65x65x6mm with clamps bolts & nuts all galvanized, as per SBD

33 kV Polymeric Pin Insulator complete

33 kV E Clamp made of MS Channel (100X50X6)mm with Bolts & Nuts all galvanized.

33kV Disc fitting for Panther/Dog/Raccoon/Rabbit conductor 90/70/45 KN B&S type

33 kV Composite Polymer Disc Insulator B & S type

Earth-wire clamp made of MS Flat 50x8mm with Nut & Bolts Warshers all galvanized.

33 kV Danger board with GI clamp Bolts & Nuts.

PG clamp/Wedge type for HTLS/Panther/Dog / Racoon conductor

Stay complete (As per Annex-C-18)

33 kV Galvanized Stay Set Complete 20ϕX1800 mm. with 2 no. turn-buckles, anchor plate (300x300x8mm) as per scope of work in SBD All galvanized

Stay Wire 7/8 SWG

33kv Stay Insulator

Stay Clamp (50x8mm)with Nut, & Bolts all galvanized

Grouting with Cement Concreating ratio with 1:3:6

Aluminum Binding wire & tape

Aluminum paint (Double Coat)

Red Oxide paints

Anti-Climbing Device (2.5mm dia (12SWG) galvanized barbed wire 3.5 kg per pole) with 2 No. clamp made of 50x8 mm strip with Nuts, Bolts & Warshers all galvanized.

Concreting of Pole (CC ratio 1:3:6) and muffing (Kicking Block) (CC ratio 1:2:4) as per scope of work in SBD

Rod type earthing of pole by GI earthing rod 20ɸx2500mm with welded Clamp 40X3mm & GI wire 8 SWG (0.5 Kg) with Bolts Clamp, Washers & Nuts complete as per Drw. REC/RDSS/GEN/07 all Galvanized

Dismantling of existing Double Pole, Clamps, insulator Structure and accessories etc. including Loading/Unloading Complete Work.

11 KV 4 pole structure

Steel Tubular Poles 11 m long (STP 11.0 M, 410 MPa , SP-55) as per IS 2713 (Parts 1 to 3): 1980 (Bottom Portion hot dip galvanized) with MS Plate (300ɸx6)

11 kV top channel 100x50x6mm 2.2 mtr. Long with PP & clamp, nuts & bolt all galvanized as per SBD specs

11 KV Cross bracing Set 50x50x6mm with Belting angle of 65x65x6mm with clamps bolts & nuts all galvanized, as per SBD

11 kV Polymer Pin Insulator with Pin complete.

GI Fish Plate 50x8mm for 11 kv DP

11 kV Compsite Polymer Disc Insulator B & S type

11 kV Disc Fittings B&S type 90/70 KN for ACSR Dog/Raccoon

11 kV Danger Board with GI clamp Bolts & Nuts

PG clamp/Wedge type for ACSR Dog/Raccoon / Rabbit

Stay complete (As per Annex-C-18)

33 kV Galvanized Stay Set Complete 20ϕX1800 mm. with 2 no. turn-buckles, anchor plate (300x300x8mm) as per scope of work in SBD All galvanized

Stay Wire 7/8 SWG

33kv Stay Insulator

Stay Clamp (50x8mm)with Nut, & Bolts all galvanized

Grouting with Cement Concreating ratio with 1:3:6

Aluminum Binding wire & tape

Aluminum paint (Double Coat)

Red Oxide paints

Anti-Climbing Device (2.5mm dia (12SWG) galvanized barbed wire 3.5 kg per pole) with 2 No. clamp made of 50x8 mm strip with Nuts, Bolts & Warshers all galvanized.

Concreting of Pole (CC ratio 1:3:6) and muffing (Kicking Block) (CC ratio 1:2:4) as per scope of work in SBD

Rod type earthing of pole by GI earthing rod 20ɸx2500mm with welded Clamp 40X3mm & GI wire 8 SWG (0.5 Kg) with Bolts Clamp, Washers & Nuts complete as per Drw. REC/RDSS/GEN/07 all Galvanized

Dismantling of existing Four Pole, Clamps, insulator Structure and accessories etc. including Loading/Unloading Complete Work.

Sign Board

Sign Board 1 No.in each town 6x4 feet (lengh x breadth) as per SBD.

Sign Board 1 No.in each town 6x4 feet (lengh x breadth) made of MS sheet 14 Gauge(1.6mm thickness) with angle suport of (3"x3",6mm) and height of board 6 feet fromm ground level to bottom of board and length of angle to be buried in the ground 1.50 feet with 1 feet hole pass inside,painting on board ( enamel paint with red oxide base coat)and printing on board (colour printing by Screen printing method)

Description of Work / Item(s)

Amount

New 33 KV Underground Cable

33 KV UG XLPE 3x400 Sq mm Single Ckt.

SINGLE POLE STRUCTURE AS PER Annexure- B 7

Steel Tubular Poles 11 m long (STP 11.0 M, 410 MPa , SP-55) as per IS 2713 (Parts 1 to 3): 1980 (Bottom Portion hot dip galvanized) with MS Plate (300ɸx6)

33 kV top channel 125x65x6mm 1.8 mtr. Long with all fixing arrngement, PP, Clamp, bolts & nuts all galvanized

33 kV Polymeric Pin Insulator complete

33 kV Danger board with GI clamp Bolts & Nuts.

Anti-Climbing Device (2.5mm dia (12SWG) galvanized barbed wire 3.5 kg per pole) with 2 No. clamp made of 50x8 mm strip with Nuts, Bolts & Warshers all galvanized.

Aluminum paint (Double Coat)

Red Oxide paints

Rod type earthing of pole by GI earthing rod 20ɸx2500mm with welded Clamp 40X3mm & GI wire 8 SWG (0.5 Kg) with Bolts Clamp, Washers & Nuts complete as per Drw. REC/RDSS/GEN/07 all Galvanized

Concreting of Pole (CC ratio 1:3:6) and muffing (Kicking Block) (CC ratio 1:2:4) as per scope of work in SBD

DOUBLE POLE STRUCTURE AS PER Annexure- B 8

Steel Tubular Poles 11 m long (STP 11.0 M, 410 MPa , SP-55) as per IS 2713 (Parts 1 to 3): 1980 (Bottom Portion hot dip galvanized) with MS Plate (300ɸx6)

11 KV Cross bracing Set 50x50x6mm with Belting angle of 65x65x6mm with clamps bolts & nuts all galvanized, as per SBD

33 kV top channel 125x65x6mm 3.2 mtr. Long with all fixing arrngement, PP, Clamp, bolts & nuts all galvanized.

Base Channel (125X65X6) 3.050 mtr. Long with Clamps and fittings as per SBD specs all galvanized.

33 kV Polymeric Pin Insulator complete

33 kV Danger board with GI clamp Bolts & Nuts.

Anti-Climbing Device (2.5mm dia (12SWG) galvanized barbed wire 3.5 kg per pole) with 2 No. clamp made of 50x8 mm strip with Nuts, Bolts & Warshers all galvanized.

Aluminum paint (Double Coat)

Red Oxide paints

Rod type earthing of pole by GI earthing rod 20ɸx2500mm with welded Clamp 40X3mm & GI wire 8 SWG (0.5 Kg) with Bolts Clamp, Washers & Nuts complete as per Drw. REC/RDSS/GEN/07 all Galvanized

Concreting of Pole (CC ratio 1:3:6) and muffing (Kicking Block) (CC ratio 1:2:4) as per scope of work in SBD

Stay complete (As per Annex-C-18)

33 kV Galvanized Stay Set Complete 20ϕX1800 mm. with 2 no. turn-buckles, anchor plate (300x300x8mm) as per scope of work in SBD All galvanized

Stay Wire 7/8 SWG

33kv Stay Insulator

Stay Clamp (50x8mm)with Nut, & Bolts all galvanized

Grouting with Cement Concreating ratio with 1:3:6

Supply of 33kV (E) 3cx400mm2 XLPE Underground cable (Cable outer sheet colour as per voltage level decided by UPCL)

Supply of HDPE Pipe PE 80/100 PN6 160 mm dia for HT cable (with colour coding of HDPE pipe as approved by UPCL in order to differentiate other voltage cables laid in other pipes) including long bends,short bends, couplers etc to ensure proper safety of cables & to avoid damage at ends, bends

Supply of Half Cut 200mm Cement Hume Pipe/PCC Slab

CABLE LAYING : Laying of HT cable as per the code of practice for installation and maintenance of power cables as per IS 1255 :1983 or latest amendments using conventional excavation method and Laying the cable in Half Cut 200mm Cement Hume Pipe/PCC Slab at the depth of about 1.5 meter as per site requirement & Cable dia including using cable trench pullers (with Line tension Indicator) and provision of cable Labels ,Protectin Tape (Tape Tile) etc. complete in all respect in the form original before digging. (All the required material to be provided by contractor) (As per approved drawing of UPCL )

Laying and Pulling of 33kV (E) 3cx400mm2 XLPE Underground cable (Cable outer sheet colour as per voltage level decided by UPCL) in half cut Hume Pipe/PCC slab.

Making of Trench using conventional excavation method

Laying of HT cable at the depth of about 1.5 meter as per the code of practice for installation and maintenance of power cables as per IS 1255 :1983 or latest amendments using cable trench pullers (with Line tension Indicator) without open excavation in HDPE pipe:including provision of cable Labels

Laying and Pulling of 33kV (E) 3cx400mm2 XLPE Underground cable (Cable outer sheet colour as per voltage level decided by UPCL) by Machine.

Laying of HDPE Pipe PE 80/100 PN6 160 mm dia for HT cable at the depth of about 1.5 meter (with colour coding of HDPE pipe as approved by UPCL in order to differentiate other voltage cables laid in other pipes) including long bends,short bends, couplers etc to ensure proper safety of cables & to avoid damage at ends, bends

Laying of HT cable at the depth of about 1.5 meter as per the code of practice for installation and maintenance of power cables as per IS 1255 :1983 or latest amendments using cable trench pullers (with Line tension Indicator) using conventional excavation method in HDPE pipe:including provision of cable Labels

Laying and Pulling of 33kV 3cx400mm2 XLPE Underground cable (Cable outer sheet colour as per voltage level decided by UPCL)

Laying of High -Density Polythylene(HDPE) Pipe PE 80/100 PN6 160 mm Dia for XLPE Cable (colour of HDPE Pipe as per voltage level decided by UPCL) using conventional excavation method with making trench.

Supply and laying of B-Class Heavy duty GI pipe as IS 1239 at Underground Road crossing, Nala crossings etc complete in all respects including long bends,short bends, couplers etc to ensure proper safety of cables & to avoid damage at ends, bends .GI Pipe 150 mm Dia

Laying and Pulling of 33kV 3cx400mm2 XLPE Underground cable (Cable outer sheet colour as per voltage level decided by UPCL)

T-Connector for 33KV UG (As per Cable current Capacity )

Heat Shrinkable jointing kit for 33 kV 3cx400 Sq. mm. XLPE outdoor

Cable jointing kit straight through for 3cx400 Sq. mm. XLPE Cable

33KV 10 KA, outdoor type Lighting Arrester.

Supply and installation of Chemical earthing station as per IS 3043 complete with GI earthing electrode ,Bentonite, . Conductor upto test link, test link,earthing chamber, 450x450 mm C.I. Manhole chamber etc.

Supply and Fixing of Cable RCC Route Marker

New 33 KV Line with ACSR Conductor

33 KV New line with HTLS Conductor weight equivalent to ACSR Panther conductor with current capacity of 800 Amps.(Approx) for Plain

SINGLE POLE STRUCTURE AS PER Annexure- C-13A

Steel Tubular Poles 11 m long (STP 11.0 M, 410 MPa , SP-55) as per IS 2713 (Parts 1 to 3): 1980 (Bottom Portion hot dip galvanized) with MS Plate (300ɸx6)

33 kV, V Type cross arm made of MS Channel 100X50X6mm complete with clamps, Nuts, Bolts & washers all galvanized

33 kV F-Bracket made of MS Channel (100X50X6) mm with Clamps, Nuts, Bolts & Washers all galvanized

33 kV Polymeric Pin Insulator complete

Earth-wire clamp made of MS Flat 50x8mm with Nut & Bolts Warshers all galvanized.

33 kV Danger board with GI clamp Bolts & Nuts.

Anti-Climbing Device (2.5mm dia (12SWG) galvanized barbed wire 3.5 kg per pole) with 2 No. clamp made of 50x8 mm strip with Nuts, Bolts & Warshers all galvanized.

Aluminum paint (Double Coat)

Red Oxide paints

Rod type earthing of pole by GI earthing rod 20ɸx2500mm with welded Clamp 40X3mm & GI wire 8 SWG (0.5 Kg) with Bolts Clamp, Washers & Nuts complete as per Drw. REC/RDSS/GEN/07 all Galvanized

Concreting of Pole (CC ratio 1:3:6) and muffing (Kicking Block) (CC ratio 1:2:4) as per scope of work in SBD

Alignment tie with armoured rod for HTLS conductor

DOUBLE POLE STRUCTURE AS PER Annexure- C- 14A

Steel Tubular Poles 11 m long (STP 11.0 M, 410 MPa , SP-55) as per IS 2713 (Parts 1 to 3): 1980 (Bottom Portion hot dip galvanized) with MS Plate (300ɸx6)

33 kV top channel 125x65x6mm 3.2 mtr. Long with all fixing arrngement, PP, Clamp, bolts & nuts all galvanized.

33 KV Cross bracing Set 50x50x6mm with Belting angle of 65x65x6mm with clamps bolts & nuts all galvanized, as per SBD

33 kV Polymeric Pin Insulator complete

GI Fish Plate 50x8mm for 33 kv DP.

33 kV Composite Polymer Disc Insulator B & S type

Earth-wire clamp made of MS Flat 50x8mm with Nut & Bolts Warshers all galvanized.

33 kV Danger board with GI clamp Bolts & Nuts.

Aluminum paint (Double Coat)

Red Oxide paints

Anti-Climbing Device (2.5mm dia (12SWG) galvanized barbed wire 3.5 kg per pole) with 2 No. clamp made of 50x8 mm strip with Nuts, Bolts & Warshers all galvanized.

Rod type earthing of pole by GI earthing rod 20ɸx2500mm with welded Clamp 40X3mm & GI wire 8 SWG (0.5 Kg) with Bolts Clamp, Washers & Nuts complete as per Drw. REC/RDSS/GEN/07 all Galvanized

Concreting of Pole (CC ratio 1:3:6) and muffing (Kicking Block) (CC ratio 1:2:4) as per scope of work in SBD

Vibration Damper for HTLS conductor

Connector suitable for jumpering of HTLS conductor

Alignment tie with armoured rod for HTLS conductor

Tension string with Dead End assembly and cross arms strip for HTLS conductor

FOUR POLE STRUCTURE AS PER Annexure - C-15A

Steel Tubular Poles 11 m long (STP 11.0 M, 410 MPa , SP-55) as per IS 2713 (Parts 1 to 3): 1980 (Bottom Portion hot dip galvanized) with MS Plate (300ɸx6)

33 kV top channel 125x65x6mm 3.2 mtr. Long with all fixing arrngement, PP, Clamp, bolts & nuts all galvanized.

33 KV Cross bracing Set 50x50x6mm with Belting angle of 65x65x6mm with clamps bolts & nuts all galvanized, as per SBD

33 kV Polymeric Pin Insulator complete

33 kV E Clamp made of MS Channel (100X50X6)mm with Bolts & Nuts all galvanized.

33 kV Composite Polymer Disc Insulator B & S type

Earth-wire clamp made of MS Flat 50x8mm with Nut & Bolts Warshers all galvanized.

33 kV Danger board with GI clamp Bolts & Nuts.

Aluminum paint (Double Coat)

Red Oxide paints

Anti-Climbing Device (2.5mm dia (12SWG) galvanized barbed wire 3.5 kg per pole) with 2 No. clamp made of 50x8 mm strip with Nuts, Bolts & Warshers all galvanized.

Concreting of Pole (CC ratio 1:3:6) and muffing (Kicking Block) (CC ratio 1:2:4) as per scope of work in SBD

Rod type earthing of pole by GI earthing rod 20ɸx2500mm with welded Clamp 40X3mm & GI wire 8 SWG (0.5 Kg) with Bolts Clamp, Washers & Nuts complete as per Drw. REC/RDSS/GEN/07 all Galvanized

Vibration Damper for HTLS conductor

Connector suitable for jumpering of HTLS conductor

Alignment tie with armoured rod for HTLS conductor

Tension string with Dead End assembly and cross arms strip for HTLS conductor

HTLS Conductor weight equivalent to ACSR Panther conductor with current capacity of 800 Amps.(Approx) WITH 3% SAG , EARTH WIRE 7/16 SWG AS PER Annexure - C-16

HTLS Conductor weight equivalent to ACSR Panther conductor with current capacity of 800 Amps.(Approx) WITH 3% SAG

EARTH WIRE 7/16 SWG

Jointing Sleeve for HTLS Conductor (Mid span compression joint)

Repair Sleeve for HTLS Conductor

GUARDING OF LINE AS PER Annexure -C-17

Guarding channel 100x50x6 mm,3750 mm long with holding clamp, packing piece, nut & bolts etc. all galvanized

GI Eye Bolt 16mm dia, 236mm long for guarding

8 SWG GI wire for guard wires and lacings

6 SWG GI wire for guard wires and lacings

G.I. Wire No. 16 SWG for binding

SPECIAL TYPE BRACKET AS PER Annexure -C-19

MS CHANNEL 125x65x6MM all galvanized

MS CHANNEL 100x50x6MM all galvanized

MS ANGLE 75x75x8 MM all galvanized

MS CHANNEL 125x65x6MM all galvanized

PP & CLAMP all galvanized

33 kV F-Bracket made of MS Channel (100X50X6) mm with Clamps, Nuts, Bolts & Washers all galvanized

Stay complete (As per Annex-C-18)

33 kV Galvanized Stay Set Complete 20ϕX1800 mm. with 2 no. turn-buckles, anchor plate (300x300x8mm) as per scope of work in SBD All galvanized

Stay Wire 7/8 SWG

33kv Stay Insulator

Stay Clamp (50x8mm)with Nut, & Bolts all galvanized

Grouting with Cement Concreating ratio with 1:3:6

33 KV New line with Panther conductor for Plains

SINGLE POLE STRUCTURE AS PER Annexure- C-13

Steel Tubular Poles 11 m long (STP 11.0 M, 410 MPa , SP-55) as per IS 2713 (Parts 1 to 3): 1980 (Bottom Portion hot dip galvanized) with MS Plate (300ɸx6)

33 kV, V Type cross arm made of MS Channel 100X50X6mm complete with clamps, Nuts, Bolts & washers all galvanized

33 kV F-Bracket made of MS Channel (100X50X6) mm with Clamps, Nuts, Bolts & Washers all galvanized

33 kV Polymeric Pin Insulator complete

Earth-wire clamp made of MS Flat 50x8mm with Nut & Bolts Warshers all galvanized.

33 kV Danger board with GI clamp Bolts & Nuts.

Anti-Climbing Device (2.5mm dia (12SWG) galvanized barbed wire 3.5 kg per pole) with 2 No. clamp made of 50x8 mm strip with Nuts, Bolts & Warshers all galvanized.

Aluminum Binding wire & tape

Aluminum paint (Double Coat)

Red Oxide paints

Rod type earthing of pole by GI earthing rod 20ɸx2500mm with welded Clamp 40X3mm & GI wire 8 SWG (0.5 Kg) with Bolts Clamp, Washers & Nuts complete as per Drw. REC/RDSS/GEN/07 all Galvanized

Concreting of Pole (CC ratio 1:3:6) and muffing (Kicking Block) (CC ratio 1:2:4) as per scope of work in SBD

DOUBLE POLE STRUCTURE AS PER Annexure- C- 14

Steel Tubular Poles 11 m long (STP 11.0 M, 410 MPa , SP-55) as per IS 2713 (Parts 1 to 3): 1980 (Bottom Portion hot dip galvanized) with MS Plate (300ɸx6)

33 kV top channel 125x65x6mm 3.2 mtr. Long with all fixing arrngement, PP, Clamp, bolts & nuts all galvanized.

33 KV Cross bracing Set 50x50x6mm with Belting angle of 65x65x6mm with clamps bolts & nuts all galvanized, as per SBD

33 kV Polymeric Pin Insulator complete

GI Fish Plate 50x8mm for 33 kv DP.

33kV Disc fitting for Panther conductor 90 KN B&S type

33 kV Composite Polymer Disc Insulator B & S type

Earth-wire clamp made of MS Flat 50x8mm with Nut & Bolts Warshers all galvanized.

33 kV Danger board with GI clamp Bolts & Nuts.

PG clamp/Wedge type for HTLS/Panther/Dog / Racoon conductor

Aluminum Binding wire & tape

Aluminum paint (Double Coat)

Red Oxide paints

Anti-Climbing Device (2.5mm dia (12SWG) galvanized barbed wire 3.5 kg per pole) with 2 No. clamp made of 50x8 mm strip with Nuts, Bolts & Warshers all galvanized.

Rod type earthing of pole by GI earthing rod 20ɸx2500mm with welded Clamp 40X3mm & GI wire 8 SWG (0.5 Kg) with Bolts Clamp, Washers & Nuts complete as per Drw. REC/RDSS/GEN/07 all Galvanized

Concreting of Pole (CC ratio 1:3:6) and muffing (Kicking Block) (CC ratio 1:2:4) as per scope of work in SBD

FOUR POLE STRUCTURE AS PER Annexure - C-15

Steel Tubular Poles 11 m long (STP 11.0 M, 410 MPa , SP-55) as per IS 2713 (Parts 1 to 3): 1980 (Bottom Portion hot dip galvanized) with MS Plate (300ɸx6)

33 kV top channel 125x65x6mm 3.2 mtr. Long with all fixing arrngement, PP, Clamp, bolts & nuts all galvanized.

33 KV Cross bracing Set 50x50x6mm with Belting angle of 65x65x6mm with clamps bolts & nuts all galvanized, as per SBD

33 kV Polymeric Pin Insulator complete

33 kV E Clamp made of MS Channel (100X50X6)mm with Bolts & Nuts all galvanized.

33kV Disc fitting for Panther conductor 90 KN B&S type

33 kV Composite Polymer Disc Insulator B & S type

Earth-wire clamp made of MS Flat 50x8mm with Nut & Bolts Warshers all galvanized.

33 kV Danger board with GI clamp Bolts & Nuts.

PG clamp/Wedge type for HTLS/Panther/Dog / Racoon conductor

Aluminum Binding wire & tape

Aluminum paint (Double Coat)

Red Oxide paints

Anti-Climbing Device (2.5mm dia (12SWG) galvanized barbed wire 3.5 kg per pole) with 2 No. clamp made of 50x8 mm strip with Nuts, Bolts & Warshers all galvanized.

Concreting of Pole (CC ratio 1:3:6) and muffing (Kicking Block) (CC ratio 1:2:4) as per scope of work in SBD

Rod type earthing of pole by GI earthing rod 20ɸx2500mm with welded Clamp 40X3mm & GI wire 8 SWG (0.5 Kg) with Bolts Clamp, Washers & Nuts complete as per Drw. REC/RDSS/GEN/07 all Galvanized

ACSR PANTHER CONDUCTOR With 3% Sag As Per Annexure-C-23

ACSR PANTHER Conductor for Phase with 3% sag.

EARTH WIRE 7/16 SWG

Jointing Sleeve for PANTHER Conductor

GUARDING OF LINE AS PER Annexure -C-17

Guarding channel 100x50x6 mm,3750 mm long with holding clamp, packing piece, nut & bolts etc. all galvanized

GI Eye Bolt 16mm dia, 236mm long for guarding

8 SWG GI wire for guard wires and lacings

6 SWG GI wire for guard wires and lacings

G.I. Wire No. 16 SWG for binding

SPECIAL TYPE BRACKET AS PER Annexure -C-19

MS CHANNEL 125x65x6MM all galvanized

MS CHANNEL 100x50x6MM all galvanized

MS ANGLE 75x75x8 MM all galvanized

MS CHANNEL 125x65x6MM all galvanized

PP & CLAMP all galvanized

33 kV F-Bracket made of MS Channel (100X50X6) mm with Clamps, Nuts, Bolts & Washers all galvanized

Stay complete (As per Annex-C-18)

33 kV Galvanized Stay Set Complete 20ϕX1800 mm. with 2 no. turn-buckles, anchor plate (300x300x8mm) as per scope of work in SBD All galvanized

Stay Wire 7/8 SWG

33kv Stay Insulator

Stay Clamp (50x8mm)with Nut, & Bolts all galvanized

Grouting with Cement Concreating ratio with 1:3:6

New 33 KV Bay With VCB's

33 KV Bay with SF-6 (SCADA Compatible)

Cost of Earthmat & Delta Earthing of Sub-station (M3)

M.S. Angle 65x65x6mm for cleat at cross joint all galvanized.

M.S Round 32mm dia, 6.21 Kg/mtr for earth mat, electodes for earth mat & delta earthing

Gravel pitching of size 1/2" to 3/4" (20x30x1)

G.I. Strip 65x6 mm.

G.I. Strip 40x6 mm.

Excavation of earth in mixed soil

Straightening and laying of Earth mat of 32 mm M S round 0.6 mtr deep in mixed soil according to drawing or as per UPCL direction or/and as per site requirement. Making T-joints, cross joint and Lap joints by welding of M S round bar together using cleats of MS Angles 65x65x6 mm, chipping the slag and painting of the joints with black bitumen paint (including supply of paint) to avoid rusting. Cutting & making electrode 2.5 mtr long with conical pointed bottom and driving of the electrode remains 450 mm below ground level. Backfilling of soil in trenches, ramming and leveling of trench properly after completion of eartmat and earthing work is complete. Making of Delta/Bridge earthing for structure/panels i.e. LA, 11 KV panels, ACDB, DCDB, Neutral of power & station transformer.

Earthing of structures using G.I. strips including strengthening, cutting, bending & welding with structure and equipments.

Special earthing by treatment of soil with highly conducted material like combination of bentonite, conductive cement, coke dust, sodium carbonate, MgSo4, NaCl & CaCl2 as per ISS 3043-1987

Earthfilling in yard

COST OF TERMINAL GANTRY WITH LA, Line Isolater,Bus Isolator, Post Insulator, CT, Busbar & connectors AT 33/11 KV SUB-STATION (M4)

COST OF TERMINAL GANTRY

M.S. Channel 125x65x65 mm all galvanized.

M.S. Angle 50x50x6mm all galvanized.

M.S. Channel 125x65x65 mm all galvanized.

33 kV Composite Polymer Disc Insulator B & S type

33kV Disc fitting for Panther conductor 90 KN B&S type

33KV 10 KA, outdoor type Lighting Arrester.

M.S. bolt & nut with washers all galvanized.

Stone pad 300x300x75 mm.

MS plate 225x225x8 mm thick all galvanized.

Fabrication charges of structure as per approved drawing

Excavation of earth in mixed soil

Grouting with Cement Concreating ratio with 1:3:6

Cement Plaster 1:4, on top & side walls

Erection of T.G. with LA

COST OF ONE SET OF LINE ISOLATOR

Line Isolator, 800A, 33KV

M.S. Channel 125x65x65 mm all galvanized.

M.S. Angle 75x75x8mm all galvanized.

M.S. Angle 50x50x6mm all galvanized.

M.S. flat 50x6 mm. all galvanized.

M.S. bolts & nut with washers all galvanized.

Fabrication charges of structure as per approved drawing

Excavation of earth in mixed soil

Grouting with Cement Concreating ratio with 1:3:6

Cement Plaster 1:4, on top & side walls

Erection charges of isolator structure

Erection charges of line isolator complete by assembeling, fixing of operating handle, pins etc for smooth operation of the isolator.

COST OF ONE SET OF BUS ISOLATOR

Bus Isolator, 800A, 33KV

M.S. Channel 125x65x65 mm all galvanized.

M.S. Angle 75x75x8mm all galvanized.

M.S. Angle 50x50x6mm all galvanized.

M.S. flat 50x6 mm. all galvanized.

M.S. bolts & nut with washers all galvanized.

Fabrication charges of structure as per approved drawing

Excavation of earth in mixed soil

Grouting with Cement Concreating ratio with 1:3:6

Cement Plaster 1:4, on top & side walls

Erection charges of isolator structure

Erection charges of Isolator complete by assembeling, fixing of operating handle, pins etc for smooth operation of the isolator.

COST OF ONE SET OF 33 KV P.I.

M.S. Channel 125x65x65 mm all galvanized.

M.S. Angle 75x75x8mm all galvanized.

33 KV Post Insulator

MS Plate 225x225x8 mm. all galvanized.

M.S. bolts & nut with washers all galvanized.

Fabrication charges of structure as per approved drawing

Excavation of earth in mixed soil

Grouting with Cement Concreating ratio with 1:3:6

Cement Plaster 1:4, on top & side walls

Erection charges of structure

Fixing and erection charges of Post Insulator

COST OF ONE SET OF CT

CT Out door, 33 KV CTR 200-100/1-1 A (SCADA Compatible)

M.S. Channel 125x65x65 mm all galvanized.

M.S. Angle 75x75x8mm all galvanized.

Junction box with 33 kv CT

MS Plate 400x400x8 mm all galvanized.

M.S. bolts & nut with washers all galvanized.

Fabrication charges of structure as per approved drawing

Excavation of earth in mixed soil

Grouting with Cement Concreating ratio with 1:3:6

Cement Plaster 1:4, on top & side walls

Erection charges of CT structure

Fixing and erection of CT

COST OF BUS BAR & CONNECTORS

ACSR PANTHER Conductor for Phase with 3% sag.

ACSR Weasel Conductor with 3 % Sag

33kV Disc fitting for Panther conductor 90 KN B&S type

33 kV Composite Polymer Disc Insulator B & S type

PG clamp/Wedge type for Panther to Panther

PG clamp/Wedge type for Panther to Dog

Connectors suitable for Panther

1. For LA suitable for panther

2. For LA suitable for dog/weasel

3. For Isolators suitable for panther

4. For Isolators suitable for dog/weasel

5. For CT/PT suitable for panther/dog

6. For PI suitable for panther

7. For , VCB suitable for panther

Labour charges for drawing bus-bar & making connection in each equipment, main & auxilary bus bar.

Cost of 33 KV SF6 -1250 AMP, Circuit Breaker & C&R Panels (M5)

33 KV SF6, 1250A, 24 V DC for I/c (SCADA Compatible)

Control Panel Inc 33 KV Single Ckt, 24 V DC (SCADA Compatible)

Control Panel Inc 33 KV Double Ckt, 24 V DC (SCADA Compatible)

Cost of 33 KV Cable Laying & Control Cable(M6)

Supply of 33kV (E) 3cx400mm2 XLPE Underground cable (Cable outer sheet colour as per voltage level decided by UPCL)

M.S CHANNEL 100X50MMX2.8 MTRX4X10 KG/MTR all galvanized.

Heat Shrinkable jointing kit for 33 kV 3cx400 Sq. mm. XLPE indoor/outdoor type

GI pipe 4" 3 mtr long

Laying of 33 kv/11 kv cable by excavation oc cable trench in mixed soil,filling of the sand upto height 250mm from bottom most level of the cable trench thereafter properly laing of the cable by placing brick on the both side of the cable then refilling of the sand from the top so as to cover the cable completely and then placing the bricks on the top of te covered cable, spreadinf of the cable warning tape and covering the tench completely with mixed soil including cost of sand bricks etc.

Filling of cable jointing kit 33 kv

Fabrication charges of structure as per approved drawing

COST OF LAYING LT CONTROL CABLES & CABLE TRENCH

M.S. Angle 50x50x6mm all galvanized.

LT Control Cable

iii) 10x2.5 Sq.mm

ii) 4x2.5 Sq.mm

i) 2x2.5 Sq.mm

MS Bar, 12mm

Perforated tray 400mm width for cable trench

Perforated tray 300 mm width for cable trench

Perforated tray 100 mm width for cable trench

Fabrication charges of structure as per approved drawing

Making cable trench.including fabrication, fixing of MS angle 50/40X6 mm size (excluding the cost of MS Angle/ MS bar) on side edge with all excavation, CC work, brick work, fixing of cable support angle one/two tier as required with stopper arrangement at 0.5 mtr gap throughout the length of the trench, making of cable trench covers with MS Bar welded mesh angle frame with lifting hooks, fixing of perforated tray complete as per drawing including cost of sand, cement, bricks, metal (gitti) etc.

Laying, spreading & jointing of LT control cable by using propers ties,lugs, connectors, cable glands in cable trench and equipments..

Cost of misc. items required for sub-station (M7)

24 V Battery charger with boost & trickle charge

24 V Battery set Maint. Free

DCDB 24 V

single line diagram board of size 2 1/2x 1 1/2 polyflex board with frame,duly painted & writing

Name plate of equipment TG, LI, BI, PI, BG, CT, PT, CB, LA etc. (Size 9"x5" with white base, red border & letter written in red color)

Sundries items Cable tie, Alu lug, Copper lug & HT, LT tape, pvc compound, ferrule, pvc flexible pipe, paint writing on panels, HT LT diff size cable gland.

COST OF FIRE PROTECTION

Rubber mat 1 mtr. wide x 2 mtr long and 12 mm thick to withstand 11 KV dielectric strength as per IS 5424-1969. Along the all equipments in Control Room.

Carbon dioxide (CO2) type fire extinguishers conforming to IS 2878 - 1976 and cylinders fully charged of 4.5 Kg capacity.

Foam type fire extinguishers, Portable type 5 lit capacity hanged on wall with bracket complete as required

Testing of S/s

Replacement of Old Aged VCBs

33KV Incomer (SCADA Compatible)

33 KV SF6, 1250A, 24 V DC for I/c (SCADA Compatible)

33kV Relay and Control Panel for Single Ckt.(SCADA Compatible)

33kV Relay and Control Panel for Single T/F.(SCADA Compatible)

33kV Relay and Control Panel for Double Ckt.(SCADA Compatible)

33kV Relay and Control Panel for Double T/F.(SCADA Compatible)

Dismantling of existing 33 KV CB & Control Panel.

33KV Outgoing (SCADA Compatible)

33 KV SF6, 1250A, 24 V DC for O/g (SCADA Compatible)

33kV Relay and Control Panel for Single Ckt.(SCADA Compatible)

33kV Relay and Control Panel for Single T/F.(SCADA Compatible)

33kV Relay and Control Panel for Double Ckt.(SCADA Compatible)

33kV Relay and Control Panel for Double T/F.(SCADA Compatible)

Dismantling of existing 33 KV CB & Control Panel.

Replacement of 33 KV Old /Frayed Conductor

Reconductoring of 33 KV line with HTLS Conductor weight equivalent to ACSR Dog conductor with current capacity of 700 Amps.(Approx)

Rod type earthing of pole by GI earthing rod 20ɸx2500mm with welded Clamp 40X3mm & GI wire 8 SWG (0.5 Kg) with Bolts Clamp, Washers & Nuts complete as per Drw. REC/RDSS/GEN/07 all Galvanized

33 kV Polymeric Pin Insulator complete

Single pole SP 72 as per annexure -C-36A

Steel Tubular Poles 13 m long (STP 13.0 M, 410 MPa , SP-72) as per IS 2713 (Parts 1 to 3): 1980 (Bottom Portion hot dip galvanized) with MS Plate (300ɸx6)

33 kV, V Type cross arm made of MS Channel 100X50X6mm complete with clamps, Nuts, Bolts & washers all galvanized

33 kV F-Bracket made of MS Channel (100X50X6) mm with Clamps, Nuts, Bolts & Washers all galvanized

33 kV Polymeric Pin Insulator complete

Earth-wire clamp made of MS Flat 50x8mm with Nut & Bolts Warshers all galvanized.

33 kV Danger board with GI clamp Bolts & Nuts.

Anti-Climbing Device (2.5mm dia (12SWG) galvanized barbed wire 3.5 kg per pole) with 2 No. clamp made of 50x8 mm strip with Nuts, Bolts & Warshers all galvanized.

Aluminum paint (Double Coat)

Red Oxide paints

Concreting of Pole (CC ratio 1:3:6) and muffing (Kicking Block) (CC ratio 1:2:4) as per scope of work in SBD

Rod type earthing of pole by GI earthing rod 20ɸx2500mm with welded Clamp 40X3mm & GI wire 8 SWG (0.5 Kg) with Bolts Clamp, Washers & Nuts complete as per Drw. REC/RDSS/GEN/07 all Galvanized

Alignment tie with armoured rod for HTLS conductor

Additional Pole STP-55 for 33 KV line (As per annexure J-20 A

Steel Tubular Poles 11 m long (STP 11.0 M, 410 MPa , SP-55) as per IS 2713 (Parts 1 to 3): 1980 (Bottom Portion hot dip galvanized) with MS Plate (300ɸx6)

33 kV, V Type cross arm made of MS Channel 100X50X6mm complete with clamps, Nuts, Bolts & washers all galvanized

33 kV F-Bracket made of MS Channel (100X50X6) mm with Clamps, Nuts, Bolts & Washers all galvanized

33 kV Polymeric Pin Insulator complete

Earth-wire clamp made of MS Flat 50x8mm with Nut & Bolts Warshers all galvanized.

33 kV Danger board with GI clamp Bolts & Nuts.

Anti-Climbing Device (2.5mm dia (12SWG) galvanized barbed wire 3.5 kg per pole) with 2 No. clamp made of 50x8 mm strip with Nuts, Bolts & Warshers all galvanized.

Aluminum paint (Double Coat)

Red Oxide paints

Concreting of Pole (CC ratio 1:3:6) and muffing (Kicking Block) (CC ratio 1:2:4) as per scope of work in SBD

Rod type earthing of pole by GI earthing rod 20ɸx2500mm with welded Clamp 40X3mm & GI wire 8 SWG (0.5 Kg) with Bolts Clamp, Washers & Nuts complete as per Drw. REC/RDSS/GEN/07 all Galvanized

Alignment tie with armoured rod for HTLS conductor

33 kV Composite Polymer Disc Insulator B & S type

HTLS Conductor weight equivalent to ACSR Dog conductor with current capacity of 700 Amps.(Approx) WITH 3% SAG

Stay complete (As per annexure C-18)

33 kV Galvanized Stay Set Complete 20ϕX1800 mm. with 2 no. turn-buckles, anchor plate (300x300x8mm) as per scope of work in SBD All galvanized

Stay Wire 7/8 SWG

33kv Stay Insulator

Stay Clamp (50x8mm)with Nut, & Bolts all galvanized

Grouting with Cement Concreating ratio with 1:3:6

Dismantling of old conductor and accessories with opening of existing jumpering and making of bundle including Loading/Unloading Complete Work.

Vibration Damper for HTLS conductor

Connector suitable for jumpering of HTLS conductor

Jointing Sleeve for HTLS Conductor (Mid span compression joint)

Repair Sleeve for HTLS Conductor

Alignment tie with armoured rod for HTLS conductor

Tension string with Dead End assembly and cross arms strip for HTLS conductor

Reconductoring of 33 KV line with ACSR Panther Conductor

Rod type earthing of pole by GI earthing rod 20ɸx2500mm with welded Clamp 40X3mm & GI wire 8 SWG (0.5 Kg) with Bolts Clamp, Washers & Nuts complete as per Drw. REC/RDSS/GEN/07 all Galvanized

33 kV Polymeric Pin Insulator complete

Single pole SP 72 as per annexure -C-36

Steel Tubular Poles 13 m long (STP 13.0 M, 410 MPa , SP-72) as per IS 2713 (Parts 1 to 3): 1980 (Bottom Portion hot dip galvanized) with MS Plate (300ɸx6)

33 kV, V Type cross arm made of MS Channel 100X50X6mm complete with clamps, Nuts, Bolts & washers all galvanized

33 kV F-Bracket made of MS Channel (100X50X6) mm with Clamps, Nuts, Bolts & Washers all galvanized

33 kV Polymeric Pin Insulator complete

Earth-wire clamp made of MS Flat 50x8mm with Nut & Bolts Warshers all galvanized.

33 kV Danger board with GI clamp Bolts & Nuts.

Anti-Climbing Device (2.5mm dia (12SWG) galvanized barbed wire 3.5 kg per pole) with 2 No. clamp made of 50x8 mm strip with Nuts, Bolts & Warshers all galvanized.

Aluminum paint (Double Coat)

Red Oxide paints

Concreting of Pole (CC ratio 1:3:6) and muffing (Kicking Block) (CC ratio 1:2:4) as per scope of work in SBD

Rod type earthing of pole by GI earthing rod 20ɸx2500mm with welded Clamp 40X3mm & GI wire 8 SWG (0.5 Kg) with Bolts Clamp, Washers & Nuts complete as per Drw. REC/RDSS/GEN/07 all Galvanized

Additional Pole STP-55 for 33 KV line (As per annexure J-20)

Steel Tubular Poles 11 m long (STP 11.0 M, 410 MPa , SP-55) as per IS 2713 (Parts 1 to 3): 1980 (Bottom Portion hot dip galvanized) with MS Plate (300ɸx6)

33 kV, V Type cross arm made of MS Channel 100X50X6mm complete with clamps, Nuts, Bolts & washers all galvanized

33 kV F-Bracket made of MS Channel (100X50X6) mm with Clamps, Nuts, Bolts & Washers all galvanized

33 kV Polymeric Pin Insulator complete

Earth-wire clamp made of MS Flat 50x8mm with Nut & Bolts Warshers all galvanized.

33 kV Danger board with GI clamp Bolts & Nuts.

Anti-Climbing Device (2.5mm dia (12SWG) galvanized barbed wire 3.5 kg per pole) with 2 No. clamp made of 50x8 mm strip with Nuts, Bolts & Warshers all galvanized.

Aluminum Binding wire & tape

Aluminum paint (Double Coat)

Red Oxide paints

Concreting of Pole (CC ratio 1:3:6) and muffing (Kicking Block) (CC ratio 1:2:4) as per scope of work in SBD

Rod type earthing of pole by GI earthing rod 20ɸx2500mm with welded Clamp 40X3mm & GI wire 8 SWG (0.5 Kg) with Bolts Clamp, Washers & Nuts complete as per Drw. REC/RDSS/GEN/07 all Galvanized

33 kV Composite Polymer Disc Insulator B & S type

33kV Disc fitting for Panther conductor 90 KN B&S type

ACSR PANTHER Conductor for Phase with 3% sag.

Aluminum Binding wire & tape

Jointing Sleeve for PANTHER Conductor

PG clamp/Wedge type for Panther

Stay complete (As per annexure C-18)

33 kV Galvanized Stay Set Complete 20ϕX1800 mm. with 2 no. turn-buckles, anchor plate (300x300x8mm) as per scope of work in SBD All galvanized

Stay Wire 7/8 SWG

33kv Stay Insulator

Stay Clamp (50x8mm)with Nut, & Bolts all galvanized

Grouting with Cement Concreating ratio with 1:3:6

Dismantling of old conductor and accessories with opening of existing jumpering and making of bundle including Loading/Unloading Complete Work.

New 11 KV XLPE Underground Cable

11 KV UG XLPE 3x240 Sq mm Single Ckt.

SINGLE POLE STRUCTURE AS PER Annexure- D 15

Steel Tubular Poles 11 m long (STP 11.0 M, 410 MPa , SP-55) as per IS 2713 (Parts 1 to 3): 1980 (Bottom Portion hot dip galvanized) with MS Plate (300ɸx6)

11 kV top channel 100x50x6mm 1.5 mtr. Long with PP & clamp, nuts & bolt all galvanized as per SBD specs

11 kV Polymer Pin Insulator with Pin complete.

11 kV Danger Board with GI clamp Bolts & Nuts

Anti-Climbing Device (2.5mm dia (12SWG) galvanized barbed wire 3.5 kg per pole) with 2 No. clamp made of 50x8 mm strip with Nuts, Bolts & Warshers all galvanized.

Aluminum paint (Double Coat)

Red Oxide paints

Rod type earthing of pole by GI earthing rod 20ɸx2500mm with welded Clamp 40X3mm & GI wire 8 SWG (0.5 Kg) with Bolts Clamp, Washers & Nuts complete as per Drw. REC/RDSS/GEN/07 all Galvanized

Concreting of Pole (CC ratio 1:3:6) and muffing (Kicking Block) (CC ratio 1:2:4) as per scope of work in SBD

DOUBLE POLE STRUCTURE AS PER Annexure- D 16

Steel Tubular Poles 11 m long (STP 11.0 M, 410 MPa , SP-55) as per IS 2713 (Parts 1 to 3): 1980 (Bottom Portion hot dip galvanized) with MS Plate (300ɸx6)

11 KV Cross bracing Set 50x50x6mm with Belting angle of 65x65x6mm with clamps bolts & nuts all galvanized, as per SBD

11 kV top channel 100x50x6mm 2.2 mtr. Long with PP & clamp, nuts & bolt all galvanized as per SBD specs

Base Channel (100X50X6) 2.2 mtr. Long with Clamps and fittings as per SBD specs all galvanized.

11 kV Polymer Pin Insulator with Pin complete.

11 kV Danger Board with GI clamp Bolts & Nuts

Anti-Climbing Device (2.5mm dia (12SWG) galvanized barbed wire 3.5 kg per pole) with 2 No. clamp made of 50x8 mm strip with Nuts, Bolts & Warshers all galvanized.

Aluminum paint (Double Coat)

Red Oxide paints

Rod type earthing of pole by GI earthing rod 20ɸx2500mm with welded Clamp 40X3mm & GI wire 8 SWG (0.5 Kg) with Bolts Clamp, Washers & Nuts complete as per Drw. REC/RDSS/GEN/07 all Galvanized

Concreting of Pole (CC ratio 1:3:6) and muffing (Kicking Block) (CC ratio 1:2:4) as per scope of work in SBD

Stays Complete (As Per Annex. F-15 )

Galvanized Stay Set Complete 16ϕX1800 mm. with 2 no. turn-buckle, anchor plate (200x200x6mm) as per scope of work in SBD All galvanized

GI Stay Wire 7/10 SWG

11 kV Stay Insulator as per SBD

Stay Clamp (50x8mm)with Nut, & Bolts all galvanized

Grouting with Cement Concreating ratio with 1:3:6

Supply of 11kV (E) 3*240mm2 XLPE cable (Cable outer sheet colour as per voltage level decided by UPCL)

Supply of HDPE Pipe PE 80/100 PN6 160 mm dia for HT cable (with colour coding of HDPE pipe as approved by UPCL in order to differentiate other voltage cables laid in other pipes) including long bends,short bends, couplers etc to ensure proper safety of cables & to avoid damage at ends, bends

Supply of Half Cut 200mm Cement Hume Pipe/PCC Slab

CABLE LAYING : Laying of HT cable as per the code of practice for installation and maintenance of power cables as per IS 1255 :1983 or latest amendments using conventional excavation method and Laying the cable in Half Cut 200mm Cement Hume Pipe/PCC Slab at the depth of about 1.2 meter as per site requirement & Cable dia including using cable trench pullers (with Line tension Indicator) and provision of cable Labels ,Protectin Tape (Tape Tile) etc. complete in all respect in the form original before digging. (All the required material to be provided by contractor) (As per approved drawing of UPCL )

Laying and Pulling of 11kV (E) 3*240mm2 XLPE cable (Cable outer sheet colour as per voltage level decided by UPCL) in half cut Hume Pipe/PCC slab.

Making of Trench using conventional excavation method

Laying of HT cable at the depth of about 1.2 meter as per the code of practice for installation and maintenance of power cables as per IS 1255 :1983 or latest amendments using cable trench pullers (with Line tension Indicator) without open excavation in HDPE pipe:including provision of cable Labels

Pulling and Laying of 11kV (E) 3*240mm2 XLPE cable (Cable outer sheet colour as per voltage level decided by UPCL) by Machine.

Laying of HDPE Pipe 160 mm dia for HT cable at the depth of about 1.2 meter (with colour coding of HDPE pipe as approved by UPCL in order to differentiate other voltage cables laid in other pipes) including long bends,short bends, couplers etc to ensure proper safety of cables & to avoid damage at ends, bends

Laying of HT cable at the depth of about 1.2 meter as per the code of practice for installation and maintenance of power cables as per IS 1255 :1983 or latest amendments using cable trench pullers (with Line tension Indicator) using conventional excavation method in HDPE pipe:including provision of cable Labels

Pulling and Laying of 11kV (E) 3*240mm2 XLPE cable (Cable outer sheet colour as per voltage level decided by UPCL) conventional excavation method.

Laying of High -Density Polythylene(HDPE) Pipe 160 mm Dia for 11kV XLPE Cable (colour of HDPE Pipe as per voltage level decided by UPCL) using conventional excavation method with making trench.

Supply and laying of B-Class Heavy duty GI pipe as IS 1239 at Underground Road crossing, Nala crossings etc complete in all respects including long bends,short bends, couplers etc to ensure proper safety of cables & to avoid damage at ends, bends .GI Pipe 150 mm Dia

Pulling and Laying of 11kV (E) 3*240mm2 XLPE cable (Cable outer sheet colour as per voltage level decided by UPCL) conventional excavation method.

Heat Shrinkable jointing kit for 11 kV 3*240 Sq. mm. XLPE outdoor

Cable jointing kit straight through for 3*240 Sq. mm. XLPE Cable

T-Connector (As per Cable current Capacity )

9KV, 5KA Outdoor type Lighting Arrester Polymer.

Supply and installation of Chemical earthing station as per IS 3043 complete with GI earthing electrode ,Bentonite, . Conductor upto test link, test link,earthing chamber, 450x450 mm C.I. Manhole chamber etc.

Supply and Fixing of Cable RCC Route Marker

New 11 KV Line with ACSR Conductor

11 KV New line with Dog conductor for Plains SP-55

No. of Single pole as per annexure -F-10

Steel Tubular Poles 11 m long (STP 11.0 M, 410 MPa , SP-55) as per IS 2713 (Parts 1 to 3): 1980 (Bottom Portion hot dip galvanized) with MS Plate (300ɸx6)

V Type cross arm made of MS Channel 100X50X6mm complete with Clamps, Clamps, Nuts, Bolts & warshers all galvanized

F-Bracket made of MS Channel (100X50X6) mm with Clamps, Nuts, Bolts & Washers all galvanized

11 kV Polymer Pin Insulator with Pin complete.

11 kV Danger Board with GI clamp Bolts & Nuts

Anti-Climbing Device (2.5mm dia (12SWG) galvanized barbed wire 3.5 kg per pole) with 2 No. clamp made of 50x8 mm strip with Nuts, Bolts & Warshers all galvanized.

Aluminum Binding wire & tape

Concreting of Pole (CC ratio 1:3:6) and muffing (Kicking Block) (CC ratio 1:2:4) as per scope of work in SBD

Rod type earthing of pole by GI earthing rod 20ɸx2500mm with welded Clamp 40X3mm & GI wire 8 SWG (0.5 Kg) with Bolts Clamp, Washers & Nuts complete as per Drw. REC/RDSS/GEN/07 all Galvanized

Aluminum paint (Double Coat)

Red Oxide paints

No. of Single Section pole as per annexure -F-11

Steel Tubular Poles 11 m long (STP 11.0 M, 410 MPa , SP-55) as per IS 2713 (Parts 1 to 3): 1980 (Bottom Portion hot dip galvanized) with MS Plate (300ɸx6)

11 kV top channel 100x50x6mm 1.5 mtr. Long with PP & clamp, nuts & bolt all galvanized as per SBD specs

F-Bracket made of MS Channel (100X50X6) mm with Clamps, Nuts, Bolts & Washers all galvanized

11 kV Polymer Pin Insulator with Pin complete.

11 kV Compsite Polymer Disc Insulator B & S type

11 kV Disc Fittings B&S type 70 KN for ACSR Dog

PG clamp/Wedge type for ACSR Dog/Raccoon / Rabbit

11 kV Danger Board with GI clamp Bolts & Nuts

Anti-Climbing Device (2.5mm dia (12SWG) galvanized barbed wire 3.5 kg per pole) with 2 No. clamp made of 50x8 mm strip with Nuts, Bolts & Warshers all galvanized.

Aluminum Binding wire & tape

Concreting of Pole (CC ratio 1:3:6) and muffing (Kicking Block) (CC ratio 1:2:4) as per scope of work in SBD

Rod type earthing of pole by GI earthing rod 20ɸx2500mm with welded Clamp 40X3mm & GI wire 8 SWG (0.5 Kg) with Bolts Clamp, Washers & Nuts complete as per Drw. REC/RDSS/GEN/07 all Galvanized

Aluminum paint (Double Coat)

Red Oxide paints

No. of Double Pole Structure as per annexure -F-12

Steel Tubular Poles 11 m long (STP 11.0 M, 410 MPa , SP-55) as per IS 2713 (Parts 1 to 3): 1980 (Bottom Portion hot dip galvanized) with MS Plate (300ɸx6)

11 kV top channel 100x50x6mm 2.2 mtr. Long with PP & clamp, nuts & bolt all galvanized as per SBD specs

11 KV Cross bracing Set 50x50x6mm with Belting angle of 65x65x6mm with clamps bolts & nuts all galvanized, as per SBD

11 kV Polymer Pin Insulator with Pin complete.

GI Fish Plate 50x8mm for 11 kv DP

11 kV Compsite Polymer Disc Insulator B & S type

11 kV Disc Fittings B&S type 70 KN for ACSR Dog

11 kV Danger Board with GI clamp Bolts & Nuts

PG clamp/Wedge type for ACSR Dog/Raccoon / Rabbit

Aluminum Binding wire & tape

Aluminum paint (Double Coat)

Red Oxide paints

Anti-Climbing Device (2.5mm dia (12SWG) galvanized barbed wire 3.5 kg per pole) with 2 No. clamp made of 50x8 mm strip with Nuts, Bolts & Warshers all galvanized.

Concreting of Pole (CC ratio 1:3:6) and muffing (Kicking Block) (CC ratio 1:2:4) as per scope of work in SBD

Rod type earthing of pole by GI earthing rod 20ɸx2500mm with welded Clamp 40X3mm & GI wire 8 SWG (0.5 Kg) with Bolts Clamp, Washers & Nuts complete as per Drw. REC/RDSS/GEN/07 all Galvanized

ACSR Dog Conductor for Phase with 3% sag.As per annexure-F-24

ACSR Dog Conductor with 3 % Sag

Jointing Sleeves suitable for ACSR DOG conductor

Guarding of 11 KV line. As per annexure- F-14

Guarding channel 100x50x6 mm,2210 mm long with holding clamp, packing piece, nut & bolts etc. all galvanized as per SBD

G.I. Wire No. 6 SWG along the span (For 1 Km. line)

EARTH WIRE 7/16 SWG

G.I. Wire No. 8 SWG accross the span (For 1 Km. line)

GI Eye Bolt 16mm dia, 236mm long for guarding

G.I. Wire No. 16 SWG for binding

Stay complete (As per Annex F-15)

Galvanized Stay Set Complete 16ϕX1800 mm. with 2 no. turn-buckle, anchor plate (200x200x6mm) as per scope of work in SBD All galvanized

GI Stay Wire 7/10 SWG

11 kV Stay Insulator as per SBD

Stay Clamp (50x8mm)with Nut, & Bolts all galvanized

Grouting with Cement Concreating ratio with 1:3:6

11 kV Line : Reconductoring/Augmentation 11 KV line on Existing Pole

Reconductoring of 11 KV line with Covered Rabbit Conductor

11 KV AL-59 ACS XLPE (70sq mm)Rabbit Covered Conductor (SS4240813 & SS4240814) EN50397-1:2006 by Electron Beam radiation Process.Including Sag Percentage

11 kV Polymer Pin Insulator with Pin complete.

11 kV Compsite Polymer Disc Insulator B & S type

11 KV Class Ball and Socket Polymeric tension insulator with Hardware with tracking IPC.

IPC (70 sqmm MVCC to 70 sqmm MVCC) for 11 KV CC.

IPC (Bare Conductor to 70 sqmm MVCC) for 11 KV CC.

11 KV Insulated Cable Ties.

Supply IPC with Aluminium Bail for Earthing 3 No / Km(11KV)

11 KV Mid span Jointing Kit Suitable for 70 Sqmm Covered Conductor.

Single pole SP 55 as per annexure -J-21 A

Steel Tubular Poles 11 m long (STP 11.0 M, 410 MPa , SP-55) as per IS 2713 (Parts 1 to 3): 1980 (Bottom Portion hot dip galvanized) with MS Plate (300ɸx6)

V Type cross arm made of MS Channel 100X50X6mm complete with Clamps, Clamps, Nuts, Bolts & warshers all galvanized

F-Bracket made of MS Channel (100X50X6) mm with Clamps, Nuts, Bolts & Washers all galvanized

11 kV Polymer Pin Insulator with Pin complete.

11 KV Insulated Cable Ties.

Earth-wire clamp made of MS Flat 50x8mm with Nut & Bolts Warshers all galvanized.

11 kV Danger Board with GI clamp Bolts & Nuts

Anti-Climbing Device (2.5mm dia (12SWG) galvanized barbed wire 3.5 kg per pole) with 2 No. clamp made of 50x8 mm strip with Nuts, Bolts & Warshers all galvanized.

Aluminum paint (Double Coat)

Red Oxide paints

Concreting of Pole (CC ratio 1:3:6) and muffing (Kicking Block) (CC ratio 1:2:4) as per scope of work in SBD

Rod type earthing of pole by GI earthing rod 20ɸx2500mm with welded Clamp 40X3mm & GI wire 8 SWG (0.5 Kg) with Bolts Clamp, Washers & Nuts complete as per Drw. REC/RDSS/GEN/07 all Galvanized

Stay complete (As per annexure F-15)

Galvanized Stay Set Complete 16ϕX1800 mm. with 2 no. turn-buckle, anchor plate (200x200x6mm) as per scope of work in SBD All galvanized

GI Stay Wire 7/10 SWG

11 kV Stay Insulator as per SBD

Stay Clamp (50x8mm)with Nut, & Bolts all galvanized

Grouting with Cement Concreating ratio with 1:3:6

Dismantling of old conductor and accessories with opening of existing jumpering and making of bundle including Loading/Unloading Complete Work.

Reconductoring of 11 KV line with ACSR Dog Conductor

ACSR Dog Conductor with 3 % Sag

Additional Pole STP-33 for 11 KV line (As per Annex-J-10A)

Steel Tubular Poles 9 m long (STP 9.0 M, 410 MPa , SP-33) as per IS 2713 (Parts 1 to 3): 1980 (Bottom Portion hot dip galvanized) with MS Plate (300ɸx6)

V Type cross arm made of MS Channel 100X50X6mm complete with Clamps, Clamps, Nuts, Bolts & warshers all galvanized

F-Bracket made of MS Channel (100X50X6) mm with Clamps, Nuts, Bolts & Washers all galvanized

11 kV Polymer Pin Insulator with Pin complete.

Earth-wire clamp made of MS Flat 50x8mm with Nut & Bolts Warshers all galvanized.

11 kV Danger Board with clamp Bolts & Nuts

Anti-Climbing Device (2.5mm dia (12SWG) galvanized barbed wire 3.5 kg per pole) with 2 No. clamp made of 50x8 mm strip with Nuts, Bolts & Warshers all galvanized.

Aluminum Binding wire & tape

Aluminum paint (Double Coat)

Red Oxide paints

Concreting of Pole (CC ratio 1:3:6) and muffing (Kicking Block) (CC ratio 1:2:4) as per scope of work in SBD

Rod type earthing of pole by GI earthing rod 20ɸx2500mm with welded Clamp 40X3mm & GI wire 8 SWG (0.5 Kg) with Bolts Clamp, Washers & Nuts complete as per Drw. REC/RDSS/GEN/07 all Galvanized

Replacement of following damaged/wornout accessories

11 kV Compsite Polymer Disc Insulator B & S type

11 kV Disc Fittings B&S type 70 KN for ACSR Dog

11 kV Polymer Pin Insulator with Pin complete.

P.G. clamps for Raccoon conductor

Aluminum Binding wire & tape

Dismantling of old conductor and accessories with opening of existing jumpering and making of bundle including Loading/Unloading Complete Work.

Reconductoring of 11 KV line with ACSR Rabbit Conductor

ACSR Rabbit Conductor with 3 % Sag

Additional Pole STP-33 for 11 KV line (As per Annex-J-10A)

Steel Tubular Poles 9 m long (STP 9.0 M, 410 MPa , SP-33) as per IS 2713 (Parts 1 to 3): 1980 (Bottom Portion hot dip galvanized) with MS Plate (300ɸx6)

V Type cross arm made of MS Channel 100X50X6mm complete with Clamps, Clamps, Nuts, Bolts & warshers all galvanized

F-Bracket made of MS Channel (100X50X6) mm with Clamps, Nuts, Bolts & Washers all galvanized

11 kV Polymer Pin Insulator with Pin complete.

Earth-wire clamp made of MS Flat 50x8mm with Nut & Bolts Warshers all galvanized.

11 kV Danger Board with clamp Bolts & Nuts

Anti-Climbing Device (2.5mm dia (12SWG) galvanized barbed wire 3.5 kg per pole) with 2 No. clamp made of 50x8 mm strip with Nuts, Bolts & Warshers all galvanized.

Aluminum Binding wire & tape

Aluminum paint (Double Coat)

Red Oxide paints

Concreting of Pole (CC ratio 1:3:6) and muffing (Kicking Block) (CC ratio 1:2:4) as per scope of work in SBD

Rod type earthing of pole by GI earthing rod 20ɸx2500mm with welded Clamp 40X3mm & GI wire 8 SWG (0.5 Kg) with Bolts Clamp, Washers & Nuts complete as per Drw. REC/RDSS/GEN/07 all Galvanized

Replacement of following damaged/wornout accessories

11 kV Compsite Polymer Disc Insulator B & S type

11 kV Disc. Fittings B&S type 45 KN

11 kV Polymer Pin Insulator with Pin complete.

P.G. clamps for Rabbit conductor

Aluminum Binding wire & tape

Dismantling of old conductor and accessories with opening of existing jumpering and making of bundle including Loading/Unloading Complete Work.

New 11 KV Bay Extension

New 11 KV Bay with VCB (SCADA Compatible)

11KV, 1000A VCB Switchgear Panel indoor & incoming type complete with CTs of ratio 800/400/5A for incomer & 400/200/5A for outgoing of prescribed specifications & with panel mounted 11KV/110V PT & TVM consisting of

Incomer (SCADA Compatible)

Outgoing (SCADA Compatible)

Bus Coupler (SCADA Compatible)

11 KV GO switch, 630 A all galvanized.

9KV, 5KA Outdoor type Lighting Arrester Polymer.

11 kV Drop out fuse set for Transfoermer With MS Channel 100x50x6mm 1 no. 2.8 mtr. Long,PP , Clamp,Nuts&Bolts all galvanized

11KV, 3Cx300 Sq. mm. XLPE Cable from Transformer to incomer VCB & its laying in trench.

Heat Shrinkable jointing kit for 11 kV 3*300mm2 XLPE outdoor

Cable joining kit for 3Cx300 sq. mm. XLPE Cable Indoor type on Incomer VCB end.

11KV, 3Cx240 sq. mm. XLPE Cable for outgoing 11KV feeders & its laying including fixing of pipe and D/P end.

Cable Jointing Kit for 3Cx240 Sq. mm. XLPE Cable for outgoing Feeder, Indoor Type.

Heat Shrinkable jointing kit for 11 kV 3*240 Sq. mm. XLPE outdoor

LT Voltage Material

LT Control Cable

i) 2x2.5 Sq.mm

ii) 4x2.5 Sq.mm

iii) 10x2.5 Sq.mm

EARTH MAT/CIVIL WORK

G.I. Strip for earthing

a) 65mmx6mm galvanized

b) 45mm x 5 mm galvanized

Special earthing by treatment of soil with highly conducted material like combination of bentonite, conductive cement, coke dust, sodium carbonate, MgSo4, NaCl & CaCl2 as per ISS 3043-1987

MISCELANEOUS

MS (RS Joist, MS Channel, MS angle,Rail as per RESPO drawings enclosed) for Misc. structures for bus bar gantry, LA, CT, PT, PI, Isolators etc. as per drawings & design and site conditions including fabrication, welding, nut & bolt,etc.complete in all respect all galvanized.

ACSR Dog Conductor with 3 % Sag

11KV LINE MISCELLANIOUS MATERIALS

Outgoing 11kV Double Pole structure of SP-23 complete (as per M8)

Steel Tubular Poles 8.5 m long (STP 8.5 M, 410 MPa , SP-23) as per IS 2713 (Parts 1 to 3): 1980 (Bottom Portion hot dip galvanized) with MS Plate (300ɸx6)

11 kV top channel 100x50x6mm 2.2 mtr. Long with PP & clamp, nuts & bolt all galvanized as per SBD specs

Base Channel (100X50X6) 2.2 mtr. Long with Clamps and fittings as per SBD specs all galvanized.

11 kV Polymer Pin Insulator with Pin complete.

11 kV Compsite Polymer Disc Insulator B & S type

11 kV Disc Fittings B&S type 90/70 KN for ACSR Dog/Raccoon

11 kV Danger Board with GI clamp Bolts & Nuts

PG clamp/Wedge type for ACSR Dog/Raccoon / Rabbit

Aluminum paint (Double Coat)

Red Oxide paints

Anti-Climbing Device (2.5mm dia (12SWG) galvanized barbed wire 3.5 kg per pole) with 2 No. clamp made of 50x8 mm strip with Nuts, Bolts & Warshers all galvanized.

Concreting of Pole (CC ratio 1:3:6) and muffing (Kicking Block) (CC ratio 1:2:4) as per scope of work in SBD

Rod type earthing of pole by GI earthing rod 20ɸx2500mm with welded Clamp 40X3mm & GI wire 8 SWG (0.5 Kg) with Bolts Clamp, Washers & Nuts complete as per Drw. REC/RDSS/GEN/07 all Galvanized

Replacement of Old Aged VCBs/OCB

Replacement of 11KV Incomer complete with CTs of ratio 800/400/5A (SCADA Compatible)

11 kV VCB 500 MVA, 800/400/5A I/C (SCADA Compatible)

Dismantling of existing 11 KV VCB/OCB.

Replacement of 11KV Outgoing complete with CTs of ratio 400/200/5A (SCADA Compatible)

11 kV VCB FDR 500 MVA, 400/200/5A(Indoor Type) O/g (SCADA Compatible)

Dismantling of existing 11 KV VCB/OCB.

Replacement of 11KV Bus coupler with 11kV motorised Bus coupler (SCADA Compatible)

11 kV VCB FDR 500 MVA, Bus Coupler (SCADA Compatible)

Dismantling of existing 11 KV VCB/OCB.

Re-conductoring of bare LT line by LT ABC Replacement of LT Conductor with AB Cable in Theft Prone Areas

Replacement of LT Bare Conductor to AB Cable 3x120+1x95 Sqmm

Additional STP 8.5 M Pole SP 21 (As per Annexure K 10)

Steel Tubular Poles 8.5 m long (STP 8.5 M, 410 MPa , SP-21) as per IS 2713 (Parts 1 to 3): 1980 (Bottom Portion hot dip galvanized) with MS Plate (300ɸx6)

Suspension clamp assembly suitable for AB Cable with all fittings and S.S.strap

Concreting of Pole (CC ratio 1:3:6) and muffing (Kicking Block) (CC ratio 1:2:4) as per scope of work in SBD

Rod type earthing of pole by GI earthing rod 20ɸx2500mm with welded Clamp 40X3mm & GI wire 8 SWG (0.5 Kg) with Bolts Clamp, Washers & Nuts complete as per Drw. REC/RDSS/GEN/07 all Galvanized

Dead end clamp assembly suitable for AB Cable with all fittings and S.S.strap

Suspension clamp assembly suitable for AB Cable with all fittings and S.S.strap

L.T. Insulation Piercing Connectors for energizing distribution kiosk/box & Jumpering

Mid span jointing sleeves (120 Sq.mm.)

Supply & Fixing of LT distribution boxes/kiosk on the LT poles including all GI clamps & material required for mounting, connections & sealing.

Insulated ABC of 3x120+1x95 Sq.mm.

1x35 mm2 XLPE/PVC insulated Al. cable for energising the distribution boxes/ kiosks.

PG Connector/Wedge type/Wedge type 95 Sqmm.

LT Stay complete Annexure I-13

Galvanized Stay Set Complete 16ϕX1800 mm. with 2 no. turn-buckle, anchor plate (200x200x6mm) as per scope of work in SBD All galvanized

GI Stay Wire 7/10 SWG

LT Stay Insulator as per SBD

Stay Clamp (50x8mm)with Nut, & Bolts all galvanized

Grouting with Cement Concreating ratio with 1:3:6

Disconnecting of LT service line of consumers before dismantling of old LT line and the reconnections through distribution boxes/kiosk, supply & fixing of Clamp/Connectors etc for Consumer Service Cables after commissioning of ABC line.

Dismantling of existing conductor, shackle insulators, Clamps and accessories etc. from the existing poles with opening of existing jumpering and making of bundle including Loading/Unloading Complete Work.

Replacement of LT Bare Conductor to AB Cable 3x95+1x70 Sqmm

Additional STP 8.5 M Pole SP 21 (As per Annexure K 10)

Steel Tubular Poles 8.5 m long (STP 8.5 M, 410 MPa , SP-21) as per IS 2713 (Parts 1 to 3): 1980 (Bottom Portion hot dip galvanized) with MS Plate (300ɸx6)

Suspension clamp assembly suitable for AB Cable with all fittings and S.S.strap

Concreting of Pole (CC ratio 1:3:6) and muffing (Kicking Block) (CC ratio 1:2:4) as per scope of work in SBD

Rod type earthing of pole by GI earthing rod 20ɸx2500mm with welded Clamp 40X3mm & GI wire 8 SWG (0.5 Kg) with Bolts Clamp, Washers & Nuts complete as per Drw. REC/RDSS/GEN/07 all Galvanized

Dead end clamp assembly suitable for AB Cable with all fittings and S.S.strap

Suspension clamp assembly suitable for AB Cable with all fittings and S.S.strap

L.T. Insulation Piercing Connectors for energizing distribution kiosk/box & Jumpering

Mid span jointing sleeves (95 Sq.mm.)

Supply & Fixing of LT distribution boxes/kiosk on the LT poles including all GI clamps & material required for mounting, connections & sealing.

Insulated ABC of 3x95+1x70 Sq.mm.

1x35 mm2 XLPE/PVC insulated Al. cable for energising the distribution boxes/ kiosks.

PG Connector/Wedge type/Wedge type 70 Sqmm.

LT Stay complete Annexure I-13

Galvanized Stay Set Complete 16ϕX1800 mm. with 2 no. turn-buckle, anchor plate (200x200x6mm) as per scope of work in SBD All galvanized

GI Stay Wire 7/10 SWG

LT Stay Insulator as per SBD

Stay Clamp (50x8mm)with Nut, & Bolts all galvanized

Grouting with Cement Concreating ratio with 1:3:6

Disconnecting of LT service line of consumers before dismantling of old LT line and the reconnections through distribution boxes/kiosk, supply & fixing of Clamp/Connectors etc for Consumer Service Cables after commissioning of ABC line.

Dismantling of existing conductor, shackle insulators, Clamps and accessories etc. from the existing poles with opening of existing jumpering and making of bundle including Loading/Unloading Complete Work.

Replacement of LT Bare Conductor to AB Cable 3x70+1x50 Sqmm

Additional STP 8.5 M Pole SP 21 (As per Annexure K 10)

Steel Tubular Poles 8.5 m long (STP 8.5 M, 410 MPa , SP-21) as per IS 2713 (Parts 1 to 3): 1980 (Bottom Portion hot dip galvanized) with MS Plate (300ɸx6)

Suspension clamp assembly suitable for AB Cable with all fittings and S.S.strap

Concreting of Pole (CC ratio 1:3:6) and muffing (Kicking Block) (CC ratio 1:2:4) as per scope of work in SBD

Rod type earthing of pole by GI earthing rod 20ɸx2500mm with welded Clamp 40X3mm & GI wire 8 SWG (0.5 Kg) with Bolts Clamp, Washers & Nuts complete as per Drw. REC/RDSS/GEN/07 all Galvanized

Dead end clamp assembly suitable for AB Cable with all fittings and S.S.strap

Suspension clamp assembly suitable for AB Cable with all fittings and S.S.strap

L.T. Insulation Piercing Connectors for energizing distribution kiosk/box & Jumpering

Mid span jointing sleeves (70 Sq.mm.)

Supply & Fixing of LT distribution boxes/kiosk on the LT poles including all GI clamps & material required for mounting, connections & sealing.

Insulated ABC of 3x70+1x50 Sq.mm.

1x35 mm2 XLPE/PVC insulated Al. cable for energising the distribution boxes/ kiosks.

PG Connector/Wedge type 50 Sqmm.

LT Stay complete Annexure I-13

Galvanized Stay Set Complete 16ϕX1800 mm. with 2 no. turn-buckle, anchor plate (200x200x6mm) as per scope of work in SBD All galvanized

GI Stay Wire 7/10 SWG

LT Stay Insulator as per SBD

Stay Clamp (50x8mm)with Nut, & Bolts all galvanized

Grouting with Cement Concreating ratio with 1:3:6

Disconnecting of LT service line of consumers before dismantling of old LT line and the reconnections through distribution boxes/kiosk, supply & fixing of Clamp/Connectors etc for Consumer Service Cables after commissioning of ABC line.

Dismantling of existing conductor, shackle insulators, Clamps and accessories etc. from the existing poles with opening of existing jumpering and making of bundle including Loading/Unloading Complete Work.

Replacement of Old /Frayed LT AB Cable

Reconductoring of LT AB Cable 3x120+1x95 Sqmm

Additional STP 8.5 M Pole SP 21 (As per Annexure K 10)

Steel Tubular Poles 8.5 m long (STP 8.5 M, 410 MPa , SP-21) as per IS 2713 (Parts 1 to 3): 1980 (Bottom Portion hot dip galvanized) with MS Plate (300ɸx6)

Suspension clamp assembly suitable for AB Cable with all fittings and S.S.strap

Concreting of Pole (CC ratio 1:3:6) and muffing (Kicking Block) (CC ratio 1:2:4) as per scope of work in SBD

Rod type earthing of pole by GI earthing rod 20ɸx2500mm with welded Clamp 40X3mm & GI wire 8 SWG (0.5 Kg) with Bolts Clamp, Washers & Nuts complete as per Drw. REC/RDSS/GEN/07 all Galvanized

Dead end clamp assembly suitable for AB Cable with all fittings and S.S.strap

Suspension clamp assembly suitable for AB Cable with all fittings and S.S.strap

L.T. Insulation Piercing Connectors for energizing distribution kiosk/box & Jumpering

Mid span jointing sleeves (120 Sq.mm.)

Supply & Fixing of LT distribution boxes/kiosk on the LT poles including all GI clamps & material required for mounting, connections & sealing.

Insulated ABC of 3x120+1x95 Sq.mm.

1x35 mm2 XLPE/PVC insulated Al. cable for energising the distribution boxes/ kiosks.

PG Connector/Wedge type/Wedge type 95 Sqmm.

LT Stay complete Annexure I-13

Galvanized Stay Set Complete 16ϕX1800 mm. with 2 no. turn-buckle, anchor plate (200x200x6mm) as per scope of work in SBD All galvanized

GI Stay Wire 7/10 SWG

LT Stay Insulator as per SBD

Stay Clamp (50x8mm)with Nut, & Bolts all galvanized

Grouting with Cement Concreating ratio with 1:3:6

Disconnecting of LT service line of consumers before dismantling of old LT line and the reconnections through distribution boxes/kiosk, supply & fixing of Clamp/Connectors etc for Consumer Service Cables after commissioning of ABC line.

Dismantling of existing conductor, shackle insulators, Clamps and accessories etc. from the existing poles with opening of existing jumpering and making of bundle including Loading/Unloading Complete Work.

Reconductoring of LT AB Cable 3x95+1x70 Sqmm

Additional STP 8.5 M Pole SP 21 (As per Annexure K 10)

Steel Tubular Poles 8.5 m long (STP 8.5 M, 410 MPa , SP-21) as per IS 2713 (Parts 1 to 3): 1980 (Bottom Portion hot dip galvanized) with MS Plate (300ɸx6)

Suspension clamp assembly suitable for AB Cable with all fittings and S.S.strap

Concreting of Pole (CC ratio 1:3:6) and muffing (Kicking Block) (CC ratio 1:2:4) as per scope of work in SBD

Rod type earthing of pole by GI earthing rod 20ɸx2500mm with welded Clamp 40X3mm & GI wire 8 SWG (0.5 Kg) with Bolts Clamp, Washers & Nuts complete as per Drw. REC/RDSS/GEN/07 all Galvanized

Dead end clamp assembly suitable for AB Cable with all fittings and S.S.strap

Suspension clamp assembly suitable for AB Cable with all fittings and S.S.strap

L.T. Insulation Piercing Connectors for energizing distribution kiosk/box & Jumpering

Mid span jointing sleeves (95 Sq.mm.)

Supply & Fixing of LT distribution boxes/kiosk on the LT poles including all GI clamps & material required for mounting, connections & sealing.

Insulated ABC of 3x95+1x70 Sq.mm.

1x35 mm2 XLPE/PVC insulated Al. cable for energising the distribution boxes/ kiosks.

PG Connector/Wedge type/Wedge type 70 Sqmm.

LT Stay complete Annexure I-13

Galvanized Stay Set Complete 16ϕX1800 mm. with 2 no. turn-buckle, anchor plate (200x200x6mm) as per scope of work in SBD All galvanized

GI Stay Wire 7/10 SWG

LT Stay Insulator as per SBD

Stay Clamp (50x8mm)with Nut, & Bolts all galvanized

Grouting with Cement Concreating ratio with 1:3:6

Disconnecting of LT service line of consumers before dismantling of old LT line and the reconnections through distribution boxes/kiosk, supply & fixing of Clamp/Connectors etc for Consumer Service Cables after commissioning of ABC line.

Dismantling of existing conductor, shackle insulators, Clamps and accessories etc. from the existing poles with opening of existing jumpering and making of bundle including Loading/Unloading Complete Work.

Reconductoring of LT AB Cable 3x70+1x50 Sqmm

Additional STP 8.5 M Pole SP 21 (As per Annexure K 10)

Steel Tubular Poles 8.5 m long (STP 8.5 M, 410 MPa , SP-21) as per IS 2713 (Parts 1 to 3): 1980 (Bottom Portion hot dip galvanized) with MS Plate (300ɸx6)

Suspension clamp assembly suitable for AB Cable with all fittings and S.S.strap

Concreting of Pole (CC ratio 1:3:6) and muffing (Kicking Block) (CC ratio 1:2:4) as per scope of work in SBD

Rod type earthing of pole by GI earthing rod 20ɸx2500mm with welded Clamp 40X3mm & GI wire 8 SWG (0.5 Kg) with Bolts Clamp, Washers & Nuts complete as per Drw. REC/RDSS/GEN/07 all Galvanized

Dead end clamp assembly suitable for AB Cable with all fittings and S.S.strap

Suspension clamp assembly suitable for AB Cable with all fittings and S.S.strap

L.T. Insulation Piercing Connectors for energizing distribution kiosk/box & Jumpering

Mid span jointing sleeves (70 Sq.mm.)

Supply & Fixing of LT distribution boxes/kiosk on the LT poles including all GI clamps & material required for mounting, connections & sealing.

Insulated ABC of 3x70+1x50 Sq.mm.

1x35 mm2 XLPE/PVC insulated Al. cable for energising the distribution boxes/ kiosks.

PG Connector/Wedge type 50 Sqmm.

LT Stay complete Annexure I-13

Galvanized Stay Set Complete 16ϕX1800 mm. with 2 no. turn-buckle, anchor plate (200x200x6mm) as per scope of work in SBD All galvanized

GI Stay Wire 7/10 SWG

LT Stay Insulator as per SBD

Stay Clamp (50x8mm)with Nut, & Bolts all galvanized

Grouting with Cement Concreating ratio with 1:3:6

Disconnecting of LT service line of consumers before dismantling of old LT line and the reconnections through distribution boxes/kiosk, supply & fixing of Clamp/Connectors etc for Consumer Service Cables after commissioning of ABC line.

Dismantling of existing conductor, shackle insulators, Clamps and accessories etc. from the existing poles with opening of existing jumpering and making of bundle including Loading/Unloading Complete Work.

Reconductoring of LT AB Cable 1x16+1x25 Sqmm

Additional STP 8.5 M Pole SP 21 (As per Annexure K 10)

Steel Tubular Poles 8.5 m long (STP 8.5 M, 410 MPa , SP-21) as per IS 2713 (Parts 1 to 3): 1980 (Bottom Portion hot dip galvanized) with MS Plate (300ɸx6)

Suspension clamp assembly suitable for AB Cable with all fittings and S.S.strap

Concreting of Pole (CC ratio 1:3:6) and muffing (Kicking Block) (CC ratio 1:2:4) as per scope of work in SBD

Rod type earthing of pole by GI earthing rod 20ɸx2500mm with welded Clamp 40X3mm & GI wire 8 SWG (0.5 Kg) with Bolts Clamp, Washers & Nuts complete as per Drw. REC/RDSS/GEN/07 all Galvanized

Dead end clamp assembly suitable for AB Cable with all fittings and S.S.strap

Suspension clamp assembly suitable for AB Cable with all fittings and S.S.strap

L.T. Insulation Piercing Connectors for energizing distribution kiosk/box & Jumpering

Mid span jointing sleeves (16 Sq.mm.)

Supply & Fixing of LT distribution boxes/kiosk on the LT poles including all GI clamps & material required for mounting, connections & sealing.

Insulated ABC of 1x16+1x25 Sq.mm.

1x16 mm2 XLPE/PVC insulated Al. cable for energising the distribution boxes/ kiosks/Street light.

PG Connector/Wedge type 25 Sqmm.

LT Stay complete Annexure I-13

Galvanized Stay Set Complete 16ϕX1800 mm. with 2 no. turn-buckle, anchor plate (200x200x6mm) as per scope of work in SBD All galvanized

GI Stay Wire 7/10 SWG

LT Stay Insulator as per SBD

Stay Clamp (50x8mm)with Nut, & Bolts all galvanized

Grouting with Cement Concreating ratio with 1:3:6

Disconnecting of LT service line of consumers before dismantling of old LT line and the reconnections through distribution boxes/kiosk, supply & fixing of Clamp/Connectors etc for Consumer Service Cables after commissioning of ABC line.

Dismantling of existing conductor, shackle insulators, Clamps and accessories etc. from the existing poles with opening of existing jumpering and making of bundle including Loading/Unloading Complete Work.

Replacement of Old /Frayed Conductor

Reconductoring of 3Ph 4w with ACSR Rabbit Conductor

Steel Tubular Poles 8.5 m long (STP 8.5 M, 410 MPa , SP-21) as per IS 2713 (Parts 1 to 3): 1980 (Bottom Portion hot dip galvanized) with MS Plate (300ɸx6)

LT Four Pin cross arm nut & Bolt all galvanized.

LT Shackle Insulator (90x75 mm)

Earth knob (Aluminium bobbin)

Shackle insulator GI clamp with accessories for 90x75 mm shackle insulator

ACSR conductor including 3% sag

ACSR Rabbit Conductor with 3 % Sag

ACSR Weasel Conductor with 3 % Sag

Concreting of Pole (CC ratio 1:3:6) and muffing (Kicking Block) (CC ratio 1:2:4) as per scope of work in SBD

Rod type earthing of pole by GI earthing rod 20ɸx2500mm with welded Clamp 40X3mm & GI wire 8 SWG (0.5 Kg) with Bolts Clamp, Washers & Nuts complete as per Drw. REC/RDSS/GEN/07 all Galvanized

Aluminum paint (Double Coat)

Red Oxide paints

Dismantling of existing conductor, shackle insulators, Clamps and accessories etc. from the existing poles with opening of existing jumpering and making of bundle including Loading/Unloading Complete Work.

Replacement of Aged DTR Structures

250 KVA To Above

Steel Tubular Poles 11 m long (STP 11.0 M, 410 MPa , SP-55) as per IS 2713 (Parts 1 to 3): 1980 (Bottom Portion hot dip galvanized) with MS Plate (300ɸx6)

Plinth of T/F with RCC Top of size 2x4x1.6 Mtr. Incl. 2 nos. MS Channel All Galvanized as per SBD

Clamps for LT Take off with bolts and nuts all galvanized.

MS Channel 100x50x6mm, 2.800mtr. long (Top Channel) with all fixing arrangment PP, Clamps, Nuts & Bolts all galvanized as per SBD specs

MS Channel 100x50x6mm, 1.300 mtr. long (Tee off) with PP,clamp, Bolt and nuts all galvanized as per SBD specs

11 kV Compsite Polymer Disc Insulator B & S type

11 kV Disc. Fittings B&S type 45 KN

11 kV, 3-ph, 400 A, 3 Pin type, Horizontal/Vertical Mounting type, Gang Operated, AB Switch with 2 Nos. MS channel 100x50x6mm PP, clamps ,Bolt and nuts all galvanized as per SBD specs

11 kV Drop out fuse set for Transfoermer With MS Channel 100x50x6mm 1 no. 2.8 mtr. Long,PP , Clamp,Nuts&Bolts all galvanized

11 kV Polymer Pin Insulator with Pin complete.

ACSR Rabbit Conductor with 3 % Sag

Anti-Climbing Device (2.5mm dia (12SWG) galvanized barbed wire 3.5 kg per pole) with 2 No. clamp made of 50x8 mm strip with Nuts, Bolts & Warshers all galvanized.

11 kV Danger Board with GI clamp Bolts & Nuts

9KV, 5KA Outdoor type Lighting Arrester Polymer.

Chemical Earthing(with GI Strip 25x3mm for Neutral Earthing of Transformer

Chemical Earthing of Transformer Body(with GI strip 25x3mm),Other structure& Equipment( with GI Wire of 8 SWG)

Chemical Earthing of Lightning Arrestor with GI Strip 25x3mm

Aluminum lugs HT side

Aluminum crimping lugs LT side

1*240 Sq.mm.,single core `XLPE insulated un-armoured aluminium conductor cable

1*400 Sq.mm.,single core `XLPE insulated un-armoured aluminium conductor cable

fencing with gate as per specification and Turfing

Red Oxide paints

Aluminum paint (Double Coat)

Concreting of Pole (CC ratio 1:3:6) and muffing (Kicking Block) (CC ratio 1:2:4) as per scope of work in SBD

Stays Complete (As Per Annex. F-15 )

Galvanized Stay Set Complete 16ϕX1800 mm. with 2 no. turn-buckle, anchor plate (200x200x6mm) as per scope of work in SBD All galvanized

GI Stay Wire 7/10 SWG

11 kV Stay Insulator as per SBD

Stay Clamp (50x8mm)with Nut, & Bolts all galvanized

Grouting with Cement Concreating ratio with 1:3:6

Dismantling of Aged DTR Structure with all worn out Accessories including Loading/Unloading Complete Work.

100 KVA & 160 KVA

Steel Tubular Poles 11 m long (STP 11.0 M, 410 MPa , SP-55) as per IS 2713 (Parts 1 to 3): 1980 (Bottom Portion hot dip galvanized) with MS Plate (300ɸx6)

Clamps for LT Take off with bolts and nuts all galvanized.

MS Channel 100x50x6mm, 2.800mtr. long (Top Channel) with all fixing arrangment PP, Clamps, Nuts & Bolts all galvanized as per SBD specs

MS Channel 100x50x6mm, 1.300 mtr. long (Tee off) with PP,clamp, Bolt and nuts all galvanized as per SBD specs

MS Channel 100x50x6mm, 2.800 mtr. Long (for Transformer Base) with all fixing arrangment PP,Clamps,Nuts & Bolts all galvanized as per SBD specs

11 kV, 3-ph, 400 A, 3 Pin type, Horizontal/Vertical Mounting type, Gang Operated, AB Switch with 2 Nos. MS channel 100x50x6mm PP, clamps ,Bolt and nuts all galvanized as per SBD specs

Transformer Belting Angle 50X50X6mm with all fixing arrangment PP,Clamps,Nuts & Bolts all galvanized.

11 kV Drop out fuse set for Transfoermer With MS Channel 100x50x6mm 1 no. 2.8 mtr. Long,PP , Clamp,Nuts&Bolts all galvanized

11 kV Polymer Pin Insulator with Pin complete.

11 kV Compsite Polymer Disc Insulator B & S type

11 kV Disc. Fittings B&S type 45 KN

ACSR Rabbit Conductor with 3 % Sag

Anti-Climbing Device (2.5mm dia (12SWG) galvanized barbed wire 3.5 kg per pole) with 2 No. clamp made of 50x8 mm strip with Nuts, Bolts & Warshers all galvanized.

11 kV Danger Board with GI clamp Bolts & Nuts

9KV, 5KA Outdoor type Lighting Arrester Polymer.

Chemical Earthing(with GI Strip 25x3mm for Neutral Earthing of Transformer

Chemical Earthing of Transformer Body(with GI strip 25x3mm),Other structure& Equipment( with GI Wire of 8 SWG)

Chemical Earthing of Lightning Arrestor with GI Strip 25x3mm

Aluminum lugs HT side

Aluminum crimping lugs LT side

70 Sq.mm.,single core `XLPE insulated un-armoured aluminium conductor cable

120 Sq.mm.,single core `XLPE insulated un-armoured aluminium conductor cable

Concreting of Pole (CC ratio 1:3:6) and muffing (Kicking Block) (CC ratio 1:2:4) as per scope of work in SBD

Red Oxide paints

Aluminum paint (Double Coat)

Stays Complete (As Per Annex. F-15 )

Galvanized Stay Set Complete 16ϕX1800 mm. with 2 no. turn-buckle, anchor plate (200x200x6mm) as per scope of work in SBD All galvanized

GI Stay Wire 7/10 SWG

11 kV Stay Insulator as per SBD

Stay Clamp (50x8mm)with Nut, & Bolts all galvanized

Grouting with Cement Concreating ratio with 1:3:6

Dismantling of Aged DTR Structure with all worn out Accessories including Loading/Unloading Complete Work.

Steel Tubular Poles 11 m long (STP 11.0 M, 410 MPa , SP-55) as per IS 2713 (Parts 1 to 3): 1980 (Bottom Portion hot dip galvanized) with MS Plate (300ɸx6)

Clamps for LT Take off with bolts and nuts all galvanized.

MS Channel 100x50x6mm, 2.800mtr. long (Top Channel) with all fixing arrangment PP, Clamps, Nuts & Bolts all galvanized as per SBD specs

MS Channel 100x50x6mm, 1.300 mtr. long (Tee off) with PP,clamp, Bolt and nuts all galvanized as per SBD specs

MS Channel 100x50x6mm, 2.800 mtr. Long (for Transformer Base) with all fixing arrangment PP,Clamps,Nuts & Bolts all galvanized as per SBD specs

11 kV, 3-ph, 400 A, 3 Pin type, Horizontal/Vertical Mounting type, Gang Operated, AB Switch with 2 Nos. MS channel 100x50x6mm PP, clamps ,Bolt and nuts all galvanized as per SBD specs

Transformer Belting Angle 50X50X6mm with all fixing arrangment PP,Clamps,Nuts & Bolts all galvanized.

11 kV Drop out fuse set for Transfoermer With MS Channel 100x50x6mm 1 no. 2.8 mtr. Long,PP , Clamp,Nuts&Bolts all galvanized

11 kV Polymer Pin Insulator with Pin complete.

11 kV Compsite Polymer Disc Insulator B & S type

11 kV Disc. Fittings B&S type 45 KN

ACSR Rabbit Conductor with 3 % Sag

Anti-Climbing Device (2.5mm dia (12SWG) galvanized barbed wire 3.5 kg per pole) with 2 No. clamp made of 50x8 mm strip with Nuts, Bolts & Warshers all galvanized.

11 kV Danger Board with GI clamp Bolts & Nuts

9KV, 5KA Outdoor type Lighting Arrester Polymer.

Chemical Earthing(with GI Strip 25x3mm for Neutral Earthing of Transformer

Chemical Earthing of Transformer Body(with GI strip 25x3mm),Other structure& Equipment( with GI Wire of 8 SWG)

Chemical Earthing of Lightning Arrestor with GI Strip 25x3mm

Aluminum lugs HT side

Aluminum crimping lugs LT side

70 Sq.mm.,single core `XLPE insulated un-armoured aluminium conductor cable

Concreting of Pole (CC ratio 1:3:6) and muffing (Kicking Block) (CC ratio 1:2:4) as per scope of work in SBD

Red Oxide paints

Aluminum paint (Double Coat)

Stays Complete (As Per Annex. F-15 )

Galvanized Stay Set Complete 16ϕX1800 mm. with 2 no. turn-buckle, anchor plate (200x200x6mm) as per scope of work in SBD All galvanized

GI Stay Wire 7/10 SWG

11 kV Stay Insulator as per SBD

Stay Clamp (50x8mm)with Nut, & Bolts all galvanized

Grouting with Cement Concreating ratio with 1:3:6

Dismantling of Aged DTR Structure with all worn out Accessories including Loading/Unloading Complete Work.

Steel Tubular Poles 11 m long (STP 11.0 M, 410 MPa , SP-55) as per IS 2713 (Parts 1 to 3): 1980 (Bottom Portion hot dip galvanized) with MS Plate (300ɸx6)

Clamps for LT Take off with bolts and nuts all galvanized.

MS Channel 100x50x6mm, 2.800mtr. long (Top Channel) with all fixing arrangment PP, Clamps, Nuts & Bolts all galvanized as per SBD specs

MS Channel 100x50x6mm, 1.300 mtr. long (Tee off) with PP,clamp, Bolt and nuts all galvanized as per SBD specs

MS Channel 100x50x6mm, 2.800 mtr. Long (for Transformer Base) with all fixing arrangment PP,Clamps,Nuts & Bolts all galvanized as per SBD specs

11 kV, 3-ph, 400 A, 3 Pin type, Horizontal/Vertical Mounting type, Gang Operated, AB Switch with 2 Nos. MS channel 100x50x6mm PP, clamps ,Bolt and nuts all galvanized as per SBD specs

Transformer Belting Angle 50X50X6mm with all fixing arrangment PP,Clamps,Nuts & Bolts all galvanized.

11 kV Drop out fuse set for Transfoermer With MS Channel 100x50x6mm 1 no. 2.8 mtr. Long,PP , Clamp,Nuts&Bolts all galvanized

11 kV Polymer Pin Insulator with Pin complete.

11 kV Compsite Polymer Disc Insulator B & S type

11 kV Disc. Fittings B&S type 45 KN

ACSR Rabbit Conductor with 3 % Sag

Anti-Climbing Device (2.5mm dia (12SWG) galvanized barbed wire 3.5 kg per pole) with 2 No. clamp made of 50x8 mm strip with Nuts, Bolts & Warshers all galvanized.

11 kV Danger Board with GI clamp Bolts & Nuts

9KV, 5KA Outdoor type Lighting Arrester Polymer.

Chemical Earthing(with GI Strip 25x3mm for Neutral Earthing of Transformer

Chemical Earthing of Transformer Body(with GI strip 25x3mm),Other structure& Equipment( with GI Wire of 8 SWG)

Chemical Earthing of Lightning Arrestor with GI Strip 25x3mm

Aluminum lugs HT side

Aluminum crimping lugs LT side

35 Sq.mm.,single core `XLPE insulated un-armoured aluminium conductor cable

Concreting of Pole (CC ratio 1:3:6) and muffing (Kicking Block) (CC ratio 1:2:4) as per scope of work in SBD

Red Oxide paints

Aluminum paint (Double Coat)

Stays Complete (As Per Annex. F-15 )

Galvanized Stay Set Complete 16ϕX1800 mm. with 2 no. turn-buckle, anchor plate (200x200x6mm) as per scope of work in SBD All galvanized

GI Stay Wire 7/10 SWG

11 kV Stay Insulator as per SBD

Stay Clamp (50x8mm)with Nut, & Bolts all galvanized

Grouting with Cement Concreating ratio with 1:3:6

Dismantling of Aged DTR Structure with all worn out Accessories including Loading/Unloading Complete Work.

Replacement of Damaged Pole's

33KV feeders

STP Pole SP-55

Steel Tubular Poles 11 m long (STP 11.0 M, 410 MPa , SP-55) as per IS 2713 (Parts 1 to 3): 1980 (Bottom Portion hot dip galvanized) with MS Plate (300ɸx6)

Aluminum Binding wire & tape

Aluminum paint (Double Coat)

Red Oxide paints

Concreting of Pole (CC ratio 1:3:6) and muffing (Kicking Block) (CC ratio 1:2:4) as per scope of work in SBD

Dismantling of existing Pole, Clamps, insulator and accessories etc. including Loading/Unloading Complete Work.

9.0 M PCC Poles

PCC Pole 9.0 Mtrs. Long

Rod type earthing of pole by GI earthing rod 20ɸx2500mm with welded Clamp 40X3mm & GI wire 8 SWG (0.5 Kg) with Bolts Clamp, Washers & Nuts complete as per Drw. REC/RDSS/GEN/07 all Galvanized

Dismantling of existing Pole, Clamps, insulator and accessories etc. including Loading/Unloading Complete Work.

11KV feeders

ST POLE SP-33

Steel Tubular Poles 9 m long (STP 9.0 M, 410 MPa , SP-33) as per IS 2713 (Parts 1 to 3): 1980 (Bottom Portion hot dip galvanized) with MS Plate (300ɸx6)

Aluminum Binding wire & tape

Aluminum paint (Double Coat)

Red Oxide paints

Concreting of Pole (CC ratio 1:3:6) and muffing (Kicking Block) (CC ratio 1:2:4) as per scope of work in SBD

Dismantling of existing Pole, Clamps, insulator and accessories etc. including Loading/Unloading Complete Work.

ST POLE SP-23

Steel Tubular Poles 8.5 m long (STP 8.5 M, 410 MPa , SP-23) as per IS 2713 (Parts 1 to 3): 1980 (Bottom Portion hot dip galvanized) with MS Plate (300ɸx6)

Aluminum Binding wire & tape

Aluminum paint (Double Coat)

Red Oxide paints

Concreting of Pole (CC ratio 1:3:6) and muffing (Kicking Block) (CC ratio 1:2:4) as per scope of work in SBD

Dismantling of existing Pole, Clamps, insulator and accessories etc. including Loading/Unloading Complete Work.

9.0 M PCC Poles

PCC Pole 9.0 Mtrs. Long

Rod type earthing of pole by GI earthing rod 20ɸx2500mm with welded Clamp 40X3mm & GI wire 8 SWG (0.5 Kg) with Bolts Clamp, Washers & Nuts complete as per Drw. REC/RDSS/GEN/07 all Galvanized

Dismantling of existing Pole, Clamps, insulator and accessories etc. including Loading/Unloading Complete Work.

8.5 M PSCC poles

PCC Pole 8.5 Mtrs. Long

Rod type earthing of pole by GI earthing rod 20ɸx2500mm with welded Clamp 40X3mm & GI wire 8 SWG (0.5 Kg) with Bolts Clamp, Washers & Nuts complete as per Drw. REC/RDSS/GEN/07 all Galvanized

Dismantling of existing Pole, Clamps, insulator and accessories etc. including Loading/Unloading Complete Work.

LT Lines

STP Pole SP-21

Steel Tubular Poles 8.5 m long (STP 8.5 M, 410 MPa , SP-21) as per IS 2713 (Parts 1 to 3): 1980 (Bottom Portion hot dip galvanized) with MS Plate (300ɸx6)

Concreting of Pole (CC ratio 1:3:6) and muffing (Kicking Block) (CC ratio 1:2:4) as per scope of work in SBD

Aluminum paint (Double Coat)

Red Oxide paints

Rod type earthing of pole by GI earthing rod 20ɸx2500mm with welded Clamp 40X3mm & GI wire 8 SWG (0.5 Kg) with Bolts Clamp, Washers & Nuts complete as per Drw. REC/RDSS/GEN/07 all Galvanized

Dismantling of existing Pole, Clamps, insulator and accessories etc. including Loading/Unloading Complete Work.

8.5 M PSCC poles

PCC Pole 8.5 Mtrs. Long

Rod type earthing of pole by GI earthing rod 20ɸx2500mm with welded Clamp 40X3mm & GI wire 8 SWG (0.5 Kg) with Bolts Clamp, Washers & Nuts complete as per Drw. REC/RDSS/GEN/07 all Galvanized

Dismantling of existing Pole, Clamps, insulator and accessories etc. including Loading/Unloading Complete Work.

Damaged Double Poles structures

33 KV Line DPs

Steel Tubular Poles 11 m long (STP 11.0 M, 410 MPa , SP-55) as per IS 2713 (Parts 1 to 3): 1980 (Bottom Portion hot dip galvanized) with MS Plate (300ɸx6)

33 kV top channel 125x65x6mm 3.2 mtr. Long with all fixing arrngement, PP, Clamp, bolts & nuts all galvanized.

33 KV Cross bracing Set 50x50x6mm with Belting angle of 65x65x6mm with clamps bolts & nuts all galvanized, as per SBD

33 kV Polymeric Pin Insulator complete

GI Fish Plate 50x8mm for 33 kv DP.

33kV Disc fitting for Panther/Dog/Raccoon/Rabbit conductor 90/70/45 KN B&S type

33 kV Composite Polymer Disc Insulator B & S type

Earth-wire clamp made of MS Flat 50x8mm with Nut & Bolts Warshers all galvanized.

33 kV Danger board with GI clamp Bolts & Nuts.

PG clamp/Wedge type for HTLS/Panther/Dog / Racoon conductor

Stay complete (As per Annex-C-18)

33 kV Galvanized Stay Set Complete 20ϕX1800 mm. with 2 no. turn-buckles, anchor plate (300x300x8mm) as per scope of work in SBD All galvanized

Stay Wire 7/8 SWG

33kv Stay Insulator

Stay Clamp (50x8mm)with Nut, & Bolts all galvanized

Grouting with Cement Concreating ratio with 1:3:6

Aluminum Binding wire & tape

Aluminum paint (Double Coat)

Red Oxide paints

Anti-Climbing Device (2.5mm dia (12SWG) galvanized barbed wire 3.5 kg per pole) with 2 No. clamp made of 50x8 mm strip with Nuts, Bolts & Warshers all galvanized.

Concreting of Pole (CC ratio 1:3:6) and muffing (Kicking Block) (CC ratio 1:2:4) as per scope of work in SBD

Rod type earthing of pole by GI earthing rod 20ɸx2500mm with welded Clamp 40X3mm & GI wire 8 SWG (0.5 Kg) with Bolts Clamp, Washers & Nuts complete as per Drw. REC/RDSS/GEN/07 all Galvanized

Dismantling of existing Pole, Clamps, insulator and accessories etc. including Loading/Unloading Complete Work.

11 KV Line DPs

Steel Tubular Poles 11 m long (STP 11.0 M, 410 MPa , SP-55) as per IS 2713 (Parts 1 to 3): 1980 (Bottom Portion hot dip galvanized) with MS Plate (300ɸx6)

11 kV top channel 100x50x6mm 2.2 mtr. Long with PP & clamp, nuts & bolt all galvanized as per SBD specs

11 KV Cross bracing Set 50x50x6mm with Belting angle of 65x65x6mm with clamps bolts & nuts all galvanized, as per SBD

11 kV Polymer Pin Insulator with Pin complete.

GI Fish Plate 50x8mm for 11 kv DP

11 kV Compsite Polymer Disc Insulator B & S type

11 kV Disc Fittings B&S type 90/70 KN for ACSR Dog/Raccoon

11 kV Danger Board with GI clamp Bolts & Nuts

PG clamp/Wedge type for ACSR Dog/Raccoon / Rabbit

Stay complete (As per Annex-C-18)

33 kV Galvanized Stay Set Complete 20ϕX1800 mm. with 2 no. turn-buckles, anchor plate (300x300x8mm) as per scope of work in SBD All galvanized

Stay Wire 7/8 SWG

33kv Stay Insulator

Stay Clamp (50x8mm)with Nut, & Bolts all galvanized

Grouting with Cement Concreating ratio with 1:3:6

Aluminum Binding wire & tape

Aluminum paint (Double Coat)

Red Oxide paints

Anti-Climbing Device (2.5mm dia (12SWG) galvanized barbed wire 3.5 kg per pole) with 2 No. clamp made of 50x8 mm strip with Nuts, Bolts & Warshers all galvanized.

Concreting of Pole (CC ratio 1:3:6) and muffing (Kicking Block) (CC ratio 1:2:4) as per scope of work in SBD

Rod type earthing of pole by GI earthing rod 20ɸx2500mm with welded Clamp 40X3mm & GI wire 8 SWG (0.5 Kg) with Bolts Clamp, Washers & Nuts complete as per Drw. REC/RDSS/GEN/07 all Galvanized

Dismantling of existing Double Pole, Clamps, insulator Structure and accessories etc. including Loading/Unloading Complete Work.

Damaged Four Poles structures

33 KV 4 pole structure

Steel Tubular Poles 11 m long (STP 11.0 M, 410 MPa , SP-55) as per IS 2713 (Parts 1 to 3): 1980 (Bottom Portion hot dip galvanized) with MS Plate (300ɸx6)

33 kV top channel 125x65x6mm 3.2 mtr. Long with all fixing arrngement, PP, Clamp, bolts & nuts all galvanized.

33 KV Cross bracing Set 50x50x6mm with Belting angle of 65x65x6mm with clamps bolts & nuts all galvanized, as per SBD

33 kV Polymeric Pin Insulator complete

33 kV E Clamp made of MS Channel (100X50X6)mm with Bolts & Nuts all galvanized.

33kV Disc fitting for Panther/Dog/Raccoon/Rabbit conductor 90/70/45 KN B&S type

33 kV Composite Polymer Disc Insulator B & S type

Earth-wire clamp made of MS Flat 50x8mm with Nut & Bolts Warshers all galvanized.

33 kV Danger board with GI clamp Bolts & Nuts.

PG clamp/Wedge type for HTLS/Panther/Dog / Racoon conductor

Stay complete (As per Annex-C-18)

33 kV Galvanized Stay Set Complete 20ϕX1800 mm. with 2 no. turn-buckles, anchor plate (300x300x8mm) as per scope of work in SBD All galvanized

Stay Wire 7/8 SWG

33kv Stay Insulator

Stay Clamp (50x8mm)with Nut, & Bolts all galvanized

Grouting with Cement Concreating ratio with 1:3:6

Aluminum Binding wire & tape

Aluminum paint (Double Coat)

Red Oxide paints

Anti-Climbing Device (2.5mm dia (12SWG) galvanized barbed wire 3.5 kg per pole) with 2 No. clamp made of 50x8 mm strip with Nuts, Bolts & Warshers all galvanized.

Concreting of Pole (CC ratio 1:3:6) and muffing (Kicking Block) (CC ratio 1:2:4) as per scope of work in SBD

Rod type earthing of pole by GI earthing rod 20ɸx2500mm with welded Clamp 40X3mm & GI wire 8 SWG (0.5 Kg) with Bolts Clamp, Washers & Nuts complete as per Drw. REC/RDSS/GEN/07 all Galvanized

Dismantling of existing Double Pole, Clamps, insulator Structure and accessories etc. including Loading/Unloading Complete Work.

11 KV 4 pole structure

Steel Tubular Poles 11 m long (STP 11.0 M, 410 MPa , SP-55) as per IS 2713 (Parts 1 to 3): 1980 (Bottom Portion hot dip galvanized) with MS Plate (300ɸx6)

11 kV top channel 100x50x6mm 2.2 mtr. Long with PP & clamp, nuts & bolt all galvanized as per SBD specs

11 KV Cross bracing Set 50x50x6mm with Belting angle of 65x65x6mm with clamps bolts & nuts all galvanized, as per SBD

11 kV Polymer Pin Insulator with Pin complete.

GI Fish Plate 50x8mm for 11 kv DP

11 kV Compsite Polymer Disc Insulator B & S type

11 kV Disc Fittings B&S type 90/70 KN for ACSR Dog/Raccoon

11 kV Danger Board with GI clamp Bolts & Nuts

PG clamp/Wedge type for ACSR Dog/Raccoon / Rabbit

Stay complete (As per Annex-C-18)

33 kV Galvanized Stay Set Complete 20ϕX1800 mm. with 2 no. turn-buckles, anchor plate (300x300x8mm) as per scope of work in SBD All galvanized

Stay Wire 7/8 SWG

33kv Stay Insulator

Stay Clamp (50x8mm)with Nut, & Bolts all galvanized

Grouting with Cement Concreating ratio with 1:3:6

Aluminum Binding wire & tape

Aluminum paint (Double Coat)

Red Oxide paints

Anti-Climbing Device (2.5mm dia (12SWG) galvanized barbed wire 3.5 kg per pole) with 2 No. clamp made of 50x8 mm strip with Nuts, Bolts & Warshers all galvanized.

Concreting of Pole (CC ratio 1:3:6) and muffing (Kicking Block) (CC ratio 1:2:4) as per scope of work in SBD

Rod type earthing of pole by GI earthing rod 20ɸx2500mm with welded Clamp 40X3mm & GI wire 8 SWG (0.5 Kg) with Bolts Clamp, Washers & Nuts complete as per Drw. REC/RDSS/GEN/07 all Galvanized

Dismantling of existing Four Pole, Clamps, insulator Structure and accessories etc. including Loading/Unloading Complete Work.

Sign Board

Sign Board 1 No.in each town 6x4 feet (lengh x breadth) as per SBD.

Sign Board 1 No.in each town 6x4 feet (lengh x breadth) made of MS sheet 14 Gauge(1.6mm thickness) with angle suport of (3"x3",6mm) and height of board 6 feet fromm ground level to bottom of board and length of angle to be buried in the ground 1.50 feet with 1 feet hole pass inside,painting on board ( enamel paint with red oxide base coat)and printing on board (colour printing by Screen printing method)

G V S Projects private Limited

Polycab India Limited

MLAPLNP Associates

Capital Electech Pvt Ltd

EMS LIMITED

AARVANSS BUILDWELL AND INFRACON LLP

Polycab India Limited

MLAPLNP Associates

Capital Electech Pvt Ltd

EMS LIMITED

AARVANSS BUILDWELL AND INFRACON LLP

Polycab India Limited

Capital Electech Pvt Ltd

MLAPLNP Associates

G V S Projects private Limited