Construction of additional rooms in Combine office building at . Dharampur, Distt. Mandi (H.P.)

Amount

Excavation in hilly areas in all heights and depths and in all kinds of soil by manual/mechanical means including saturated soil comprising of ordinary soil, soft rocks, hard rocks, chiseling/wedging out of rock (where blasting is prohibited) and other intermediate classification of soil, setting out true to the required lines, grades width cutting and trimming of side slopes and level as shown in the drawing and as directed by the Engineer-in-Charge at site according to the MORD technical specification clause 1603.1, 1603.2 and sorting out useful materials and stacking the same in all leads and lifts in acquired width of the road and transportation of un-useful material for filling in road ways, camber, embankments for grade improvements and disposal of all surplus un-useful material to acquired width of the road or on approved dumping sites through all modes of transportation including head load or animals transport or mechanical means alongwith its leveling fine dressing and carriage of machineries, materials, tools equipments and safety measures and other incidentals necessary to complete the work by mechanical means and/or labour if required. Any loss to the public/private property during the course of execution shall be the absolute responsibility of the contractor which shall have to be duly compensated by him in all cases as per direction of the Engineer-in-Charge including carriage of material within all leads and lifts. A recovery of useful stone for 504.42 cum (Five hundred four decimal four two) cubic metre @ Rs. 300/- (Rupees Three hundred only) per cubic metre shall be effected on pro-rata basis in each running bill from this item. The rates are inclusive of royality, GST or other taxes imposed by the Government.

Excavation in foundation, trenches etcetera in all classification of soil such as pick work, jumper work, blasting work soft rock and hard rock including chiselling wedging and any other mixed variety in dry or saturated conditions upto any depth and lift including pumping and bailing out water where required including stacking the serviceable and unserviceable materials separately as directed and then returning the stacked soil in fifteen centimeters layers when required into plinth and sides of foundation etcetera consolidating each deposited layer by ramming and watering and then disposing of all surplus un-serviceable excavated earth within all leads and lifts as per directed by the Engineer-in-Charge including entire carriage of material with in all leads and lifts, disposed materials to be neatly dressed and levelled including other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

Filling in plinth with sand under floors including watering ramming consolidating and dressing complete including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

Providing form work with mild steel plates 3.15 mm (three point one five millimetre) thick welded with angle iron in frame of 30x30x5mm (Thirty into thirty into five millimetre) size so as to give a fair finish including centring, shuttering, strutting and propping and centring etc etera with wooden battens and ballies in all heights of propping and centring below supporting floor to ceiling not exceeding 4 (four) meters and removal of the same for insitu-reinforced concrete and plain concrete work upto all floor level in all heights including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

In foundation,footings bases of columns etcetera for mass concrete.

In flat surfaces such as soffits of suspended floors, roofs, landings balconies and access platform and the like floor upto any thickness upto all floor levels.

In beams, cantilevers, girders and lintels, sides and soffits of beams, beams haunching cantilevers bressumers and lintels in all depth /height not exceeding 1 (one) metre depths upto all floor levels

In columns, pillars,piers, abutments posts and struts square rectangular or polygonal in plan upto all floor level.

Stair Case with sloping or stepped soffits excluding landing except spiral stair upto all floor level.

Vertical surfaces such as walls (any thickness) partition and the like including attached pillasters, buttresses plinth and string courses etcetra and the like in all floor heights.

In edges of slabs and breaks in floors and walls under any width/ height upto all floor level.

Providing and laying in position cement concrete of specified grade M-10 mechanically mixed as per specification and curing complete but excluding cost of form work in foundation and plinth including all heights/depths including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and laying in position cement concrete of specified grade mechanically mixed cement concrete 1:4:8 (One cement: four sand: eight graded/crushed stone aggregate 40mm (Forty millimetre) nominal size) as per specification and curing complete but excluding cost of form work in all work up to plinth level including all heights/depths including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

Providing and laying mechanically mixed 1:5:10 (one cement :five coarse sand : ten) graded crushed stone aggregate 40 mm(forty millimetres) nominal size cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to all floor height excluding the cost of centering, shuttering and finishing in all respect including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

Providing weep holes in brick masonry/stone masonry, plain / reinforced concrete abutment, wing walls, return walls, retaining walls and Breast walls with 110mm (One hundred ten millimeter) diameter PVC Pipe made of D-plast finolex having working pressure not less than 4.50 Kg P/Sq cm (four point five Killogramme per Square centimetres) extending through the full width of structures with slope of 1 one (Vertical) : 20 ( Twenty) (Horizontal) towards drawing face complete up to all height as per drawing and technical specifications clauses 614, 709, 1204.3.7 including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

Providing and laying damp proof course 40mm (Forty milimetres ) thick with cement concrete 1:2:4 ( One cement : two sand : four graded crushed stone agregate 12.5mm ( Twelve decimal five milimetres ) nominal size curing complete including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

Applying a coat of residual petroleum bitumen of grade of VG-10 (ten) of approved quality using 1.7kg (One point seven) Kilogramme per square metre on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly soaked in kerosene oil including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

Providing and laying in position specified grade of reinforced cement concrete mechanically mixed M-20 all work up to plinth level in all heights excluding the cost of centering, shuttering, finishing and reinforcement including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

Providing and laying in position specified grade cement concrete mechanically mixed M-20 all work up to plinth level excluding the cost of centering, shuttering, including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

Providing and laying Reinforced cement concrete mechnically mixed and vibrated in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up to plinth level upto excluding cost of centring shuttering finishing and reinforcement M-25 cement concret work obtain minium crushing strenght of 25 N/mm2 ( Twenty three) Newton per millimetre square)with minium cement contents of 425Kg/Cum (Four hundred twenty five killogramme per Cubic metres) using cement content as per approved design mix, upto all floor levels including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

Providing and laying Reinforced cement concrete mechnically mixed and vibrated in reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° (fifteen) Degree landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to all floor level, excluding the cost of centering, shuttering, finishing and reinforcement M-25 cement concret work obtain minium crushing strenght of 25 N/mm2 ( Twenty three) Newton per millimetre square)with minium cement contents of 425Kg/Cum (Four hundred twenty five killogramme per Cubic metres) using cement content as per approved design mix, upto all floor levels including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

Providing, hoisting and fixing above plinth level up to all floor level precast reinforced cement concrete in mouldings as in cornices, windows sills etc, including setting in cement mortar 1:3 (1 cement : 3 coarse sand) cost of required centering, shuttering but, excluding the cost of reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded crushed stone aggregate 20 mm nominal size). including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

Providing and laying in position machine batched and machine mixed and vibrated design mix M-25 (twenty five) grade cement concrete for reinforced cement concrete work,to obtained minium crushing strength of 25N/mm2 (Twenty five ) Newton per millimetres square) with minium cement contents of 425Kg/Cum (Four hundred twenty five killogramme per Cubic metres) using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

All works upto plinth level.

All works above plinth level upto all floor level.

Providing and laying Mild steel and Medium Tensile steel bars Tata Tiscon, Sail, JINDAL, RINL, PANTHER & (JSPL) Shyam steel for reinforced cement concrete work including straightening, cutting, bending, placing in position and binding all complete upto plinth level including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

Providing and laying Thermo-mechnically treated bar of grade FE-500D or more,of Tata Tiscon, Sail, JINDAL, RINL, PANTHER & (JSPL) Shyam steel make for reinforced cement concrete work including straightening, cutting, bending, placing in position and binding all complete upto plinth level including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

Providing and laying Thermo-mechnically treated bar or grade Fe 500D or more, of Tata,TISCO, JINDAL, RINL, PANTHER & (JSPL) Shyam steel make for reinforced cement concrete work including straightening, cutting, bending, placing in position and binding all complete above plinth level upto all floor levels including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5( seven point five) in foundation and plinth in cement mortar 1:6 (one cement : six coarse sand) curing complete including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5( seven point five) in superstructure above plinth level upto all floor level in all shapes and size in cement mortar 1:6 (one cement : six coarse sand) curing complete including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 ( seven point five) in foundation and plinth in Cement Mortar 1:3( One cement: three coarse sand) and curing complete including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 ( seven point five) in superstructure above plinth level up to all floor levels in Cement Mortar 1:3( One cement: three coarse sand) and curing complete including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (one cement : six coarse sand : twelve graded crushed stone aggregate 20 mm ( twenty millimetre) nominal size upto plinth level with cement mortar (1:6) (One cement : six coarse sand) including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

Stone filling /Soling under floors tightly hand packed upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Filling with brick agreegate in soak pit complete consolidating and dressing complete including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

Providing and fixing 20mm (Twenty millimetre) nominal dia chromium plated brass curtain rod having wall thickness of 1.25mm (One point two five) millimetres with two chromium plated brass brackets fixed with C.P. Brass screws and PVC sleeves etc., upto all floor levels including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

Providing and fixing 300×16mm (Three hundred into sixteen millimetre) nominal size corrosion resistnt AISI - grade stainless steel aluminium sliding door bolts, ISI marked with nuts and screws etc. complete upto all floor levels including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. TThe rates are inclusive of royality, GST or other taxes imposed by the Government.

Providing and fixing AISI-grade and stinless steel tower bolts(barrel tupe) with necessary screws . complete upto all floor levels including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

250x10mm (Two hundred fifty into ten millimetres)

150x10mm (one hundred fifty into ten millimetres)

Providing and fixing bright/matt finished stainless steel handles approved quality and make , with necessary screws etc complete upto all floor levels including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

125mm (one hundred twenty five millimetres)

100 mm (one hundred millimetres)

Providing and fixing 100 mm (hundred millimetre) stainless steel hard drawn hooks and eye complete with all floor level including entire carriage of materials upto all leads and lifts. The rates are inclusive of royality, GST or other taxes imposed by the Government

Providing and fixing AISI-Grade stainless steel floor door stopper ISI marked (anodic coating not less than grade AC10 (ten) as per IS:1868) transparent and dyed to required colour and shade with necessary screws etc. complete upto all floor level including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

Providing and fixing 150 mm ( one hundred fifty millimetres ) oxidized M.S. double acting spring hinges with necessary screws etc. complete upto all floor levels including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

Providing Ist class teak wood work in frames of doors,windows,clerestory,windows and other frames wrought,framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length(hold fast lugs or dash fasterner shall be paid for seprately) upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing ISI marked 35 mm (thirty five millimetre) thick stainless steel butt hinges with necessary screws flush door shutters conforming to IS : 2202(Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters made of kitply kutty flush door, industries (swastik) Jawala Samrat Laminate Pvt. Ltd. (Samred) CNC commercial ltd (Shivalik) SR Jindal Ply wood Industries (Prima) including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government..

Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m ( one point fve metre)in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm ( one hundred into eight millimetre) size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in- Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm ( ninety two into forty four millimetre) & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriatedimension (Area of window upto 1.75 sqm)including entire carriage of material with in all leads lifts upto all floor levels and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government..

Providing and fixing factory made uPVC white colour casement/ Casement cum fixed glazed door comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in- Charge. (Single / double glass panes and silicon sealent shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Casement door with top hung ventilator with 3D and S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series) frame 67 x 64 mm, sash 67 x 110 mm & mullion 67 x 80 mm all having wall thickness of 2.3 ±.0.2 mm and single glazing bead / double glazing bead of appropriate dimension.(Area of door upto 2.50 sqm)including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government..

Providing and fixing double glass unit 6mm tougned glass outside + 12mm (twelve millimetre) argon gas filled (in between) + 5 mm ( five millimetre )clear tougned glass inside fixed with sillicon sealent etc. complete. Glass shall be without any flaws, bubbies etc. with frame of upvc complete upto all floor level including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government..

Fly wire mesh with upvc frame in openable parts of window with spring and roller inbuilt in bug mech with necessary screw etc. complete upto all floor level including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and Fixing Toughened glass panes 6mm thick of approved quality with silicon upvc frame in door as per direction of Engineer-in-charge including all leads,lifts and carriage of materials upto all floor level including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Glazing with glass panes of 5.50mm(five point five zero millimeters) thickness (weight not less than 13.75 kg/sqm.)( thirteen point seven five killogramm) including entire carriage of material with in all leads lifts upto all floor level and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Structural steel work riveted, bolted or welded in built up sections,, made of Tata, Jindal, trusses and trussed, in purlins in building framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. including entire carriage of material with in all leads and lifts upto all floor level and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals .The rates are inclusive of royality, GST or other taxes imposed by the Government.

Steel work welded in built up sections,, made of Tata, Jindal, framed work including cutting hoisting, fixing in position using structural steel etc. as required In Grating frames, guard bar, ladder railing, brackets, gates and similar work. and applying a priming coat of approved steel primer all complete including entire carriage of material with in all leads and lifts upto all floor level and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals .The rates are inclusive of royality, GST or other taxes imposed by the Government.

Providing and fixing M.S. fan clamp type I or II of 16 mm ( One or two of sixteen) millimetres dia M.S. bar, bent to shape with hooked ends in R.C.C. slabs or beams during laying, including painting the exposed portion of loop, all as per standard design complete including entire carriage of material with in all leads and lifts upto all floor level and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals .The rates are inclusive of royality, GST or other taxes imposed by the Government.

Providing and laying matt finished vitrified tile of size 100x100x16mm ( one hundred into one hundred into sixteen millimetre) having water absorption less than 0.5% ( zero point five) and conforming to IS: 15622 of approved make Somany/ Kajaria/ Nitco /RAK, Johnson & Johnson in all colours and shades in out door floors such as footpath, court yard multi models etc., laid on 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete upto all floor level in all heights including entire carriage of material with in all leads lifts and technical specifications as per the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

Providing and laying 10mm thick Full body vitrified floor tiles of size 600x600 (Six hundred into six hundred millimeters) with water absorption less than 0.08% ( zero point zero eight ) and conforming to IS: 15622, of approved make Somany/Kajaria/Nitco /Orient RAK, Johnson & Johnson) in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (three point three killogramm per square meters) including grouting the joints with white cement and matching pigments etc., complete upto all floor level in all heights including entire carriage of material with in all leads lifts upto all floor level and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals .The rates are inclusive of royality, GST or other taxes imposed by the Government.

Providing and laying Full body exterior grade vitrified floor tiles of size 600x600x10mm (Six hundred into six hundred into ten millimeters) in matt finished of asian with water absorption less than 0.08% ( zero point zero eight )and conforming to IS: 15622, of approved make Somany/Kajaria/Nitco /Orient RAK, Johnson & Johnson), in all colours and shades, laid on 20mm ( twenty millimetre) thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (three point three killogramm per square meters) including grouting the joints with white cement and matching pigments etc., upto all floor level in all heights including entire carriage of material with in all leads lifts upto all floor level and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals .The rates are inclusive of royality, GST or other taxes imposed by the Government.

Providing and Fixing Anti-Skid Full body vitrified floor tiles of size 300x300 mm (three hundred into three hundred millimetre) in matt finish (of approved shade and pattern) of duragress of Somany/ Kajaria/ RAK/Johnson & Johnson Nitco /Orient as per the drawing with water absorption less than 0.08% ( zero point zero eight )and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete upto all floor level and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals .The rates are inclusive of royality, GST or other taxes imposed by the Government.

Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm(three hundred into three hundred into nine point eight) millimetre having with water absorption less than 0.5% and conforming to IS: 15622 of approved make Somany/Kajaria/Nitco /Orient RAK, Johnson & Johnson)in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete upto all floor level and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals .The rates are inclusive of royality, GST or other taxes imposed by the Government.

Providing and laying 10mm thick Full body vitrified floor tiles of size 600x600 ( six hundred into six hundred millimetre)with water absorption less than 0.08% ( zero point zero eight percent)and conforming to IS: 15622, of approved make Somany/ Kajaria/ Nitco /RAK, Johnson & Johnson, in skriting risers of steps and dados of all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete upto all floor level and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals .The rates are inclusive of royality, GST or other taxes imposed by the Government.

Providing and fixing 8mm thick Paraquit or action tesa clip in NOVAPAN , ARCHIDPLY, ACTION TESA,GREEN,NATIONAL,KITPLY preliminated wooden in flooring (H.D.F. AC-4) over C.C. base with poly sheet & thermocoal sheet cushion below complete upto all floor level and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals .The rates are inclusive of royality, GST or other taxes imposed by the Government.

Providing and fixing 8mm thick Paraquit or action tesa clip in NOVAPAN , ARCHIDPLY, ACTION TESA,GREEN,NATIONAL,KITPLY preliminated wooden in skriting (H.D.F. AC-4) over C.C. base with poly sheet & thermocoal sheet cushion below complete complete upto all floor level and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals .The rates are inclusive of royality, GST or other taxes imposed by the Government.

Providing and laying Full body exterior grade vitrified floor tiles of size 600x600x10mm ( six hundred into six hundred into ten millimetre) Somany/ Kajaria/ Nitco /RAK, Johnson & Johnson in skriting or riser of steps with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete complete upto all floor level and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals .The rates are inclusive of royality, GST or other taxes imposed by the Government..

Providing and laying Digital Tiles of size 30x60 mm (thirty into sixty millimeter) (thickness to be specified by the manufacturer )of approved make of Kajaria , Nitco,Somany,Orient,Rak, Johnson and Johnson in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm (twelve millimeter) thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm (three poitn three killogramm per square meter)including pointing in white cement mixed with pigment of matching shade complete upto all floor level including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government..

Providing and fixing 18 mm thick Granite stone slab,Perlato, Rosso verona, Fire Red or Dark Emperadore machine cut, mirror/ eggshell polished , Granite stone work for wall lining (veneer work) including dado, skirting, risers of steps etc., in required design and pattern wherever required, stones of different finished surface texture, on 12 mm ( twelve millimetre )(average) thick cement mortar 1:3 (1 cement : 3 coarse sand) laid and jointed with white cement slurry @ 3.3 kg/sqm ( three point three kilograme per square metre) including pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing, polishing etc. all complete upto all floor level including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

Providing and laying antiskid vetrified tiles 30x150mmx10mm (thirty into one hundred fifty into ten millimetre)coloured or of approved Kajaria , Nitco,Somany,Orient,Rak, Johnson and Johnson shade in flooring, treads of steps and landing laid on a bed of 12mm ( twelve millimetre)thick cement mortar 1:3 (1cement : 3 sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match i/c rubbing and polishing complete upto all floor level including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

Providing and laying antiskid vetrified tiles 15x150mmx10mm ( fifteen into one hundred fifty into ten millimetre)coloured or of approved shade in skirting riser of steps laid on a bed of 12mm thick cement mortar 1:3 (1cement : 3 sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match i/c rubbing and polishing complete upto all floor level including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government..

Providing and laying antiskid vetrified tiles 450x450mmx15mm ( four hundred fifty into four hundred fifty into fifteen millimetre)coloured or of approved Kajaria , Nitco,Somany,Orient,Rak, Johnson and Johnson shade in flooring, treads of steps and landing laid on a bed of 12mm ( twelve millimetre) thick cement mortar 1:3 (1cement : 3 sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match i/c rubbing and polishing complete upto all floor level including entire carraige of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government..

Providing and laying cobble stone of approved quality and shade in flooring 100x100x80mm ( one hundred into one hundred into eighty millimetre)thick on 20mm (twenty millimetre) average thick base of cement mortar 1:4 (one cement : four sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of cobbles including rubbing and granite finish complete upto all floor level including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

Providing double edge Moulding to 18 mm ( eighteen millimeter) of approved make of Kajaria , Nitco,Somany,Orient,Rak, Johnson and Johnson(average) thick and 50mm (fifty millimeter) wide granite stone counters, vanities etc. including machine polishing to edge to give high gloss finish et. Complete upto all floor level including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

Providing 12 mm ( twelve millimetre) thick marine ply ISI marked with soft wood 40x40 mm ( forty into forty millimetre) frame @ 600x600 mm ( six hundred into six hundred millimetre) centre to centre on both side with 4 mm (four millimetre) thick veneers liminates (teak ply) to be polished or 12 mm ( twelve millimetre) thick marine ply ISI marked with 1mm (one millimetre) thick mica liminates decorative first class kiln seasoned teak wood beading out of 25x12 mm ( twenty five into twelve millimetre) to be polished upto all floor level including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and laying 25 mm (twenty five millimeter) thick cement concrete flooring 1:2:4 (one cement : two sand : four graded/crushed stone aggregate of size 12.5 mm (twelve point five millimeter) and below laid over cement (base concrete to be paid separately)in all heights up to all floor levels in all heights /depths including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Govt.

Providing and fixing prepainted sandwich made of tata dura shine puffed roofing with top skin of 0.60 (Zero point six zero) millimetres thick rock wool and interior skin of 0.50 ( Zero point five zero) millimetres prepainted steel sheet steel frames are to be painted of approved shade i/c fixing with screws prepainted iron J or L hooks, bolts and nuts with prepainted limpet and rubber washers complete with all accesories as required as per the specification and direction of Engineer-in charge upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing ridges or hips 60(sixty)centimetres overall with prepainted steel sheet made of tata dura shine steel sheet roofing with hot dipped of 0.60 (zero point sixty) millmetres thick i/c fixing with prepainted iron J or L hooks, bolts and nuts 6 mm (six millimetre) dia metre with prepainted limpet G.I. metalic zink coated sheet with top cover regular polyster (RNP) organic coating of 20 (twenty) micron over 5(five) micron primer coating to back coat of polyster of 5 (five) micron over 5 (five) microns primer coating and rubber washers complete with all accesories as required upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing valley 90(Ninety)centimetres overall with prepainted of tata dura shine steel sheet roofing of 0.60 (zero point sixty) millimtres thick with hot dipped matalic zinc coated sheet with top coat of regular modified polyster orginic coating of back coat of polyster of 5 (five) microns over 5 ( five) microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts with prepainted limpet and rubber washers complete upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing flushing 38cm(Thirty eight centimeter) overall with 0.60mm ( Zero point six milimetre)thick pre painted sheet made of tata durashine in roofing with hot dipped metallic Zinc coated sheet with top coat of regular modified polyester organic coating of 20 microns over 5 (Five) microns primer coating + back coat of polyster of 5 (Five) microns over 5(Five) microns primer coating i/c fixing with pre painted J or L hooks, bolts and nuts 6(Six milimetre) dia meter & pre painted G.I. limpet & bitumen washers complete upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. he rates are inclusive of royality, GST or other taxes imposed by the Government.

Providing and fixing MS BP Sheet 1.66 to 2.00 (One point sixty six to two ) millimetres thick of TATA Dura shine make in eaves board/ facia/ soffits/ ceiling including cutting fixing and welding to steel roof members and applying a coat of red lead primer complete upto all heights as per direction of Engineer in Charge ( base members of steel work shall be measured and paid separtely ) upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. he rates are inclusive of royality, GST or other taxes imposed by the Government.

Providing and fixing 30(Thirty) Centimetres wide 45 (Foryt five) Centimetres overall semicircular 0.63 (Zero point six three)millimetres thick with zinc coating not less then 275 gramme per square metre plain G.I. sheet gutter with iron brackets 40x3mm size bolts and nuts and washers etc. including making necessary connections with rain water pipe complete as per design upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing wind ties of 40x6mm flat iron section complete as per design upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing P.G.I. Sheet bend of required degree (0.63mm thick sheet) for rain water pipeincluding entire carriage of material with in all leads lifts upto all floor level and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. he rates are inclusive of royality, GST or other taxes imposed by the Government.

Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm (fifteen centimetre) diameter and weighing not less than 440 grams (four hundred forty gramme) complete upto all floor levels including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals .The rates are inclusive of royality, GST or other taxes imposed by the Government. .

Providing and fixing 110 mm (one hundred ten milimetre) on wall face unplasticised PVC rain water pipes made of Supreme, AKG, Finolex, Prince, Kisan, SFMC, Diplast conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (ten milimetre) gap for thermal expansion, (i) Single socketed pipes.including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals .The rates are inclusive of royality, GST or other taxes imposed by the Government. .

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid uPVC rain water pipes Supreme, AKG, Finolex, Prince, Kisan, SFMC, Diplast conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (ten milimetre) gap for thermal expansion complete upto all floor level including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals.

Coulper 110mm ( one hundred ten millimetre)

110 mm ( one hundred ten millimetre) plain bend

110mm ( one hundred ten millimetre)dia uP.V.C. shoe

Providing and fixing 110mm dia (one hundred ten millimetres)PVC clamps ISI marked of Finolex Supreme, AKG, Prince, Kisan, SFMC, Diplast make of approved design with steel screws and rawal plugs etc. Complete upto all floor level including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing Exterior Grade MDF slats made from acoustical fibre board (of density 750-800kg/m3) with linear perforation backed with acoustical fleece to achieve 0.88 NRC to be installed in toungue & groove pattern over aluminium or G.I. frame work with G.I. lock in clips with combination of wood fibre cement composites tiles 15mm (Fifteen ) millimetre with colours of approved shade of size 595x595mm( five hundred ninty five into five hundred ninty five)millimetre noise absorption 0.85NRC to be installed on to 24(Twenty four) Grid system of Himalayan Acoustics/Dexune or its equivalent (False ceiling material shall be non combustible fire retardent & confirm to Bs:476 & Astmd 635-1991 & IS 15061-2002. as per the direction of Engineer-in-charge and HPPWD Specification.complete in all respect upto all floor level as per specification and the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incientals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing DEXUNE/HunterDuglas /Saint Gobain tiles false ceiling of approved materials of size 595x595 mm ( five hundred ninety five into five hundred ninety five millimetre) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 ( one twenty grams) grams / sqm. Both side inclusive) consisting of main “T” runner with suitably spaced joint to get required length and of size 24x38 mm ( twenty four into thirty eight millimetre) made from 0.30 mm ( zero point thirty millimetre) thick (minimum) sheet, spaced at 1200 mm ( one thousand two hundred millimetre)center to center and cross “T” of size 24x25 mm ( twenty four into twenty five millimetre) made of 0.30 mm( zero point thirty millimetre) (minimum) sheet, 1200 mm ( one thousand two hundred millimetre) long spaced between main “T” at 600 mm ( six hundred millimetre) center to center to form a grid of 1200x600 mm ( one thousand two hundred into six hundred millimetre)and secondary cross “T” of length 600 (six hundred)and size 24x25 mm ( twenty four into twenty five millimetre) made of 0.30mm (minimum) ( zero point thirty millimetre) sheet to be interlocked at middle of the 1200x600 mm ( one thousand two hundred into six hundred millimetre) panel to form grid of 600x600 mm( six hundred into six hundred millimetre) and wall angle of size 24x24x0.3 mm (twenty four into twenty four into zero point three) millimetre and lying false ceiling tiles of approved texture in the grid including, required cutting /making , opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27x37x25x1.6mm ( twenty seven into thirty seven into twenty five into one point six millimetre) fixed to ceiling with 12.5 mm ( twelve point five millimetre) dia and 50mm ( fifty millimetre) long dash fasteners, 4mm ( four millimetre) GI adjustable road with galvanized butterfly level clips of size 85x30x0.8mm ( eighty five into thirty into zero point eight millimetre) spaced at 1200mm ( one thousand two hundred millimetre) center to center along main T, bottom exposed width of 24 mm ( twenty four millimetre) of all T-sections shall be pre-painted with polyester paint, all complete for all height as per specifications, drawings and as directed by Engineer-in-charge. 8 mm thick fully perforated calcium silicate board made with Calcareous & Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process to give stable crystalline structure with minimum compressive strength 225 kg/ sq. cm, (two hundred twenty five ) killogramm per Square centemetre. bending strength 100 kg/sq. cm , (one hundred) killogramm per Square centemetre of size 595x595 mm, ( five hundred ninty five into five hundred ninty five)millimetre having perforation of dia. 10 mm with minimum perforated area 18 % (eighteen percent) with non woven tissue on the back side, having and NRC ( Noise Reduction Coefficient) of 0.85, (zero point eighty five) with 50 mm(Fifty) millimetre thick rockwool of 48 kg /cum (forty eight) killogramm per cubic metre backing complete as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing matel ceiling of MONRD profile 8mm thick F-206 of size 600x600mm with runner 3600mm cross tees of size 1200mm and 600mm complete with butter fly clips and hanger etc. as per required pattern complete as per detailed drawing & specification as per direction of Engineer-in-charge including all leads, lifts and carriage of material and other incidental .The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing 45x30cm wide screen made of MS hollow square sections of 50x50mm size 3mm thickness for main frame and M.S. hollow square section for distribution members 19mmx19mm size 3mm thick placed at equal distance between centre to centre duly welded with the main frame and decorative screen centre piece 23cmx45cm made to shape out of 20x3mm M.S. flat frame covered with black sheet duly welded with main frame of the screen. The screen should be embedded or fixed in RCC pillars and bottom of beam by mechanically means including priming coat of steel primer as per drawing/design and instruction of Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing 1st quality GRC/Unistone wall cladding conforming to IS:15622 (thickness to be specified by the manufacture) of approved make in all colours shades except burgundy, bottle green black of any size as approved by Engineer-in-charge. In skirting, risers of steps and dados over 12mm thick bed of cement mortar 1:3 (one cement : three sand)and jointing with grey cement slurry @ 3.3 kg per sqm. including pointing in white cement mixed with pigment of matching shade complete upto all floor level including entire carriage of materials with in all leads and lifts and technical as per specfication in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing MS railing for stair case having balluster of 19mm x19mm ( ninteen into ninteen millimetres) M.S. solid square bar with a clear height of 85cm (eighty five centimetres) embedded in cement concrete steps and jointed with electrical/gas welding at top along with MS flat of 40mmx6mm ( forty into six millimetres) size complete with a applying priming coat of red lead paint as per drawing specification upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing 75mmx60 mm with second class Indian teak wood rounded hand rails in straight lenth complete upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing stainless steel knock down railing of kich AISI 316 of 38mm. Dia handrail fixed on 10x50mm S.S. flat baluster (Design code DT53-2-163) placed at 1200 C/C along with 3 Nos @ 16 mm Mid rails connected at the side of baluster with fixtures the balustrade would be fixed on to floor with casted base plate of minimum 6mm thickness base plate shall be concealed with suitable S.S. 316 grade cover cape railing height to be taken @ 85mm (Eighty five) millimetre level complete upto all floor level lincluding entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government. .

15 mm (fifteen milimetre) cement plaster on the fair side of single or half brick wall of mix 1:6 (one cement : six fine sand) complete upto all floor level including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals .The rates are inclusive of royality, GST or other taxes imposed by the Government.

15 mm (fifteen milimetre) cement plaster on the rough side of single or half brick wall of mix 1:6 (one cement : six fine sand) complete upto all floor level including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals .The rates are inclusive of royality, GST or other taxes imposed by the Government.

15 mm (fifteen milimetre) cement plaster on the rough side of single or half brick wall of mix 1:3 (one cement : three fine sand)complete upto all floor level including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals .The rates are inclusive of royality, GST or other taxes imposed by the Government.

6 mm (six milimetre)cement plaster of mix: 1:3 (one cement : three fine sand) complete upto all floor level including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals .The rates are inclusive of royality, GST or other taxes imposed by the Government.

Distempering (two or more coats) with over and including water thick made priming coat with cement primer with oil bound washable distemper of approved brand Nerolac , Berger (Bison Acrylic) Asian Paints (Tractor, Acrylic), Shalimar of approved manufacturer, of required shade and colour complete, on new concrete /masonry/plastered surfaces after and including preparing the surface by thoroughly cleaning oil,grease,dirt and other foreign matter and sand papering the surface smooth complete as required upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Finishing walls with Two or more coat applied @ 1.43 ltr/10 sqm (One point forty three liters per ten square metre) over and including priming coat of exterior primer applied @ 0.90 liter/10 sqm (zero point nine liters per ten square metre) Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade preparation of surface, etc. complete on undecorated wall surface (two coats) to give an even shade and final finish after thoroughly cleaning the surfaces to remove all dirt dust and other foreign matter etcetera including sand papered smooth complete upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Finishing walls with Two or more coat applied @ 3.84 Kg/10 sqm (three point eight four kilograme per ten square metre) with water proofing cement paint of required shade preparation of surface, etc. complete on undecorated wall surface to give an even shade and final finish after thoroughly cleaning the surfaces to remove all dirt dust and other foreign matter etcetera including sand papered smooth complete upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Wall painting with premium emulsion paint of approved brand and manufacture ICI (Dulux Gloss, Nerolac, Berger ( Luxal High Gloss) Asian Paints ( Premium Apcolite Gloss Shalimar to give an even shade : Two or more coats on new work upto all floor levels including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer JK wall putty/ Birla white Putty make over the plastered wall surface to prepare the surface even and smooth complete upto all floor level including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and Applying painting one or more coats of oil type wood preservative of ICI (Dulux Gloss), Nerolac, Berger (Luxol High Gloss), Asian Paints (Premium Apcolite Gloss), Shalimar. make on old work surface after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter, sand papering and knotting upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm(zero point nine liters per ten square metre) over an under coat of primer applied @0.75 ltr/10 sqm(zero point seven five liters per ten square metre) of approved brand and manufacture of ICI (Dulux Gloss), Nerolac, Berger (Luxol High Gloss), Asian Paints (Premium Apcolite Gloss), Shalimar. make including cleaning of all dirt, dust and other foreign matter sand papering and stopping complete upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm (zero point nine liters per ten square metre)over an under coat of primer applied @ 0.80 ltr/ 10 sqm (zero point eight liters per ten square metre) of approved brand and manufactureICI (Dulux Gloss), Nerolac, Berger (Luxol High Gloss), Asian Paints (Premium Apcolite Gloss), Shalimar make including cleaning the surface of all dirt dust and other forign metter complete upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and laying water proofing treatment, by applying cement slurry mixed with water proofing cement compound of Dr.Fixit Padfin or equivalent consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm. Mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hour. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing of expansion joint system related with wall joint (internal/ external) location as per drawings and direction of Engineer-In- Charge. The joints shall be of extruded aluminum base members, self aligning / centering arrangement and support plates as per ASTM B221- 02. The material shall be such that it provides an Expansion Joints System suitable for vertical wall to wall/ wall to corner application, both new and existing construction in office Buildings & complexes with no slipping down tendency amongst the components of the Joint System. The Joint System shall utilize light weight aluminum profiles exhibiting minimal exposed aluminum surfaces mechanically snap locking the multicellular to facilitate movement. (Material shall confirm to ASTM 6063.) Wall Joint of 100 mm gap complete upto all floor level including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

Providing under layer for plinth protection of 75 mm (Seventy five millimeters) thick (unconsolidated) bed dry brick/stone aggregate 40mm (Forty millimeters) nominal size with well rammed and consolidated and grouted with fine sand including preparation of ground complete in all respect upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

Making plinth protection 50mm (fifty millimeter) thick in cement concrete 1:3:6 (one cement : three sand (zone - III) : six graded crushed stone aggregate 20mm (twenty millimeter) nominal size) over 75 mm(seventy five millimetres) thick bed of dry brick bllast 40 mm(forty millimetres) nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling and derssing and finishing the top smooth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

Constructing Coursed rubble hammer dressed 'U' shape open surface drain with side wall. 15 X 23 cm (Fifteen into twenty three centimeter ) in cement mortar 1:6 ( One Cement : Six approved Sand) and inside plastering with cement mortar 1:3 (One Cement: Three approved Sand) including earth work and laying 10 cm (Ten Centimatre ) cement concrete in 1:5:10 (One Cement : Five approved Sand : Ten graded crushed stone aggregate) of 40 mm (Forty millimetres) nominal size and 7.5 cm (seven Point Five Centimatre ) cement concrete 1:2:4 (One Cement : Two approved Sand : Four graded crushed stone aggregate of 20 mm (Twenty millimetre) nominal size) and finished with a floating coat of neat cement complete as per standard design upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and laying G.I. pipes complete with G.I. fittings including trenching and refilling etc. of B.S.T/ JINDAL(HISAR)/ TATA STEEL TUBE LTD /PRAKASH SURYA tube upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

15mm ( Fifteen ) millimetres nominal bore

20mm (Twenty ) millimetres nominal bore

25mm (Twenty five) millimetres nominal bore

32mm (Thirty two) millimetres nominal bore

Providing and laying Making connection of galvanised steel distribution branch with galvanised mild steel main 25mm to 40mm (twenty five to forty) millimetres nominal bore by providing and fixing tee make of UniK, KS, AMCO, AVR, NVR, RR, SUW including cutting and threading the pipe complete upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government..

Fixing water meter and stop cock in G.I. pipe line including cutting and threading the pipe and making long screws etc. complete (cost of water meter and stop cock to be paid separately).upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government..

Providing and fixing Polyethelene-Aluminium-Polyethelene PE-AL-PE CompositePressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black havingthermal stability for hot & cold water supply, capable to withstand temperature upto 80°C, including all special fittings of composite material (engineering plasticblend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes the costs ofcutting chases and including testing of joints complete as per direction of the engineer in charge.Concealed work, including cutting chases and making good the wall etc.upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government..

1216 (16 mm OD) pipe

1620 (20 mm OD) pipe

2025 (25 mm OD) pipe

2532 (32 mm OD) pipe

Providing and fixing White Vitreous china Orissa pattern W.C. pan of size 580x440 mm (five hundred eighty into four hundred forty millimetrers) with integral type foot rests water closet squatting pan (Indian type W.C. pan ) of Parryware, Hindware Sanitaryware, Neycer, Cera. make with 100 mm (one hundred millimetrers) sand cast Iron P or S trap, 10 (ten) Litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever equired upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing vitreous china dual purpose closet suitable to use as squitting pan or Europeen Type water closet ( Anglo Indian WC Pan) with seat and lid fixed CP brass hinges and rubber buffers 10 liters low level flushing cistern with fitting and brackets, 40 mm flush bend, 20 mm over flow pipe with special of standard make and mosquito proof cupling of approved municipal design complete including painting of fitting and brackets cutting and making good the walls and floor whereever required white vitreous china dual purpose WC pan make of Parryware, Hindware Sanitaryware, Neycer, Cera with white china flushing cistern and CP flush bend upto all floor level including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing viterous china CASCADE NXT C0207 Wall Hung Closet (540x365x395) White shade wall hung WC with soft close seat cover, hinges, accessories set size mm of / Jaquar /Parryware, Hindware Sanitaryware, Neycer, Cera. complete upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government..

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 (ten) litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm (forty millimetres) flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required WC pans with ISI Marked white solid plastic seat and lid of Parryware, Hindware Sanitaryware, Neycer, Cera. make upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing viterous China wash basin (510x400 mm ) (five hundred ten into four hundred millimetre)CAT No. S 2040101 and Pedestal) CAT No. S2090101 In White Shade of superime quality Parryware, Hindware Sanitaryware, Neycer, Cera including cutting holes & making good the same and carriage of materials within all leads and lifts complete upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing 505X405X155mm (five hundred five into four hundred five into one hundred fifty five millimetres) white vitreous china wash basin C 8863 Basin (half Pediestal) complete making good of the wall where ever require Hindware/Parryware /CERA, Sanitary ware, Naycer make upto all floor level including entire carriage of material with in all leadsand lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing viterous china wash basin CASCADE NXT C0404 Basin with Half Pedastal C0379 in White Shade of Parryware, Hindware Sanitaryware, Neycer, Cera. including holes & making good the same and carriage of materials within all leads and lifts:- of superior quality as per direction of Engineer-in-charge.

Providing and fixing Hindware/Parryware /CERA, Sanitary ware, Naycer make upto all floor level including entire carriage of material with in all leadsand lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing Stainless Steel A ISI 304 (18/8) (eighten/eight) kitchen sink size 510 x1040 mm ( five hundred ten into one thousand forty) millimetres bowl depth 250 mm ( Two hundred fifty ) millimetres of AMC, UNIK, DIAMOND, Neelkanth. make as per IS:13983 with C.I. brackets and stainless steel plug 40 mm (forty millimetres) including painting of fittings and brackets, cutting and making good the walls wherever required upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing draining board with C.I. brackets including painting of brackets, cutting and making good the walls wherever required :White glazed fire clay draining board of size 600x450x 25 mm (six hundred into four hundred fifity into twanty five milimetre) including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government..

Providing and fixing 32mm (Thirty two millimetre) dia flexible pipe waste pipe Finolex make for wash basin including including PVC waste fitting complete upto all floor levels The rate is includes of octroi, royality, Malkana, toll tax , sale tax or other taxes imposed by the Government.

Providing and fixing plasticised PVC connection pipe Finolex make with brass unions 450mm ( four hundred fifty millimetre) length 15mm (fifteen millimetre) nominal size upto all floor level. The rate is includes of octroi, royality, Malkana, toll tax , sale tax or other taxes imposed by the Government.

Providing and fixing 600x450mm (six hundred into four hundred fifty millimetre) beveled edge mirror of superior glass make of Atul Modi Guard, Golden fish mounted on 6mm (six millimetre) thick A.C. sheet or plywood sheet and fixed to wooden plugs with C.P. brass screws and washer including the carriage of material within all leads, lifts through all modes of transportation upto all floor level as per direction of the Engineer-in-charge and other incidentals. The rate is includes of octroi, royality, Malkana, toll tax , sale tax GST or other taxes imposed by the Government.

Providing and fixing C.P. brass long nose bib cock Cat no.CON 107KN of Jaquar JAL, ESS ESS. Kingston,Gem,Parko,Techno,Seiko make single control of approved quality conforming to IS standards. 15 mm (fifteen millimetres) nominal bore upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing C.P. brass long nose bib cock Cat no.OPP -15037PM of Jaquar JAL, ESS ESS. Kingston,Gem,Parko,Techno,Seiko make single control of approved quality conforming to IS standards. 15 mm (fifteen millimetres) nominal bore upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and Fixing Swan neck pillar tap with left hand operating knob single control CON-CHR-123BKN ofof Jaquar JAL, ESS ESS. Kingston,Gem,Parko,Techno,Seiko make complete. upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and Fixing OPP-15001 PM pillar cock Jaquar JAL, ESS ESS. Kingston,Gem,Parko,Techno,Seiko make complete. upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and Fixing Angular stop cock with wall flange of opel prime no. CON 053KN of Jaquar JAL, ESS ESS. Kingston,Gem,Parko,Techno,Seiko make single control complete in all respect upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and Fixing Concealed stop cock with wall flange of opel prime no. CON 083FTK Stop Cock PM of Jaquar JAL, ESS ESS. Kingston,Gem,Parko,Techno,Seiko make single control of jaquar or equavalent complete in all respect upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and Fixing Angular stop cock with wall flange of opel prime no. OPP-15053 PM of Jaquar JAL, ESS ESS. Kingston,Gem,Parko,Techno,Seiko make single control complete in all respect upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and Fixing Angular stop cock with wall flange of opel prime no. CON 053KN of of Jaquar JAL, ESS ESS. Kingston,Gem,Parko,Techno,Seiko make single control complete in all respect upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing C.P.Mixer for kitchen sink with casted swinging CON 309KN jaquar or equavalent complete In all respect including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and Fixing Soap dish stainless steel CAN -1131N of Jaquar or equivalent complete in all respectupto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing Towel Rack with lower hanger No. AHS-1581H of hotelier series of JAQUAR, or equivalent of superior quality upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing Corner glass self with bract No.ACN-1173 of hotelier series of JAQUAR, ESS-ESS of superior quality upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing Glass shelf 550 mm (five hundred fifty millimetres) long with C.P. Brass bracket and guard rail no. AQN-7771 of Jaquar fixed with C.P. Brass screws etc complete upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing U shaped wall mounted rail with hings 600x 100 mm ( Six hundred into one hundred millimetre ) Cat No. B2210107 and wall mounted grab bar 600 mm ( six hundred millimetre) long CAT No. B2210106 jaguar or equivalent superior quality complete upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing 8 mm (eight millimetres) dia C.P. / S.S. Jet with flexible tube upto 1.00( one point zero zero) metre long with S.S. triangular plate to Eureopean type W.C. of Kingston, Gem, Parko, Techno, JAL, ESS ESS. JAQUAR, Seiko. quality and make upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing gun metal gate valve with C.I. Wheel of approved quality (screwed end) Leader, Zoloto, Kilburn, CIM, Valves, Sant of make upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

25mm (Twenty five ) millimetres nominal bore

20mm (Twenty ) millimetres nominal bore

Providing and fixing G.I. Union in G.I. pipe of Unik, KS, AMCO, AVR, NVR, RR, SUW make including cutting and threading the pipe and making long screws etc. including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

15mm (Fifty ) millimetres nominal bore

20mm (Twenty ) millimetres nominal bore

32mm (Thirty two ) millimetres nominal bore

40mm (forty millimetre ) nominal bore

Providing and placing on terrace (at all floor levels) polyethylene water storage tank 1000 (one thousand) litre make of sintex net capacity tank , IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing ball valve (brass) of approved quality of Kingston, Gem, Parko, Techno, JAL, ESS ESS. JAQUAR, Seiko make, High or low pressure, with plastic floats complete 15mm (Fifteen) millimetres nominal bore including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing 110 mm (One hundred ten millimetres) high pressure uPVC spigot and socket, waste and ventilating pipes ISI marked of Finolex make including fixing with approved adhesive etc. complete including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing 150mm (One hundred fifty millimetres) high pressure uPVC spigot and socket, waste and ventilating pipes ISI marked of Finolex make including fixing with approved adhesive etc. complete including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing uPVC floor trap of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete. With upto all floor level. 110 mm X 90 mm (one hundred ten into ninety milimetres) including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing uPVC door bend with ovalaccess door, insertion rubber washer 3 mm ( three millimetres) thick bolts and nuts ISI marked of Finolex make complete including fixing with approved adhesive etc.including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

I) 110mm (one hundred ten millimetre) dia

I) 150mm (one hundred fifty millimetre) dia

Providing and fixing uPVC plain bend ISI marked of Finolex make including fixing with approved adhesive etc. complete.including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

I) 110mm (one hundred ten millimetre) dia

II) 150mm (one hundred fifty millimetre) dia

Providing and fixing uPVC plain double equal branch ISI marked of Finolex make including fixing with approved adhesive etc. complete.including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

I) 110mm (one hundred ten millimetre) dia

II) 150mm (one hundred fifty millimetre) dia

Providing and fixing uPVC single equal branch with oval access door, ISI marked of Finolex make insertion rubber washer 3 mm (three millimeyres) thick bolts and nuts complete including fixing with approved adhesive etc. Complete including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

I) 110mm (one hundred ten millimetre) dia

II) 150mm (one hundred fifty millimetre) dia

Providing and fixing uPVC clamps ISI marked of Finolex make including fixing with approved adhesive etc.completeincluding entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

I) 110mm (one hundred ten millimetre) dia

II) 150mm (one hundred fifty millimetre) dia

Providing and fixing uPVC Collars ISI marked of Finolex make including fixing with approved adhesive etc.completeincluding entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

I) 110mm (one hundred ten millimetre) dia

II) 150mm (one hundred fifty millimetre) dia

Providing and fixing Cowl size 110 mm ( one hundred ten millimetre) including carriage of materials upto all leads and lifts including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and Fixing Soap dish recessed type stainless steel AHS-1531 of Jaquar or equivalent complete in all respectupto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing toilet paper holder C.P. brass including the carriage of material within all leads, lifts through all modes of transportation as per direction of the Engineer-in-charge and other incidentals. The rate is includes of octroi, royality, Malkana, toll tax , GST, sale tax or other taxes imposed by the Government.

Providing and fixing G.I. inlet connection for flush pipe with W.C. pan including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing 110 mm ( one hundred ten millimetre) on wall face unplasticised Rigid -uPVC rain water pipes Finolex make conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, diameter complete including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing 110mm ( one hundred ten millimetre) bend on wall face unplasticised - uPVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm ( ten millimetre ) gap for thermal expansion.complete including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Supplying fixing in position prcast RCC mainhole cover and frame required shape and approved quality circular shap 450mm (four hundred fifty milimetes) internal dia metre including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and laying 450 mm (four hundred fifty millimetre)dia RCC pipes. Non Pressure NP-3 class (Medium duty) R.C.C. pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Constructing brick masonry manhole in cement mortor 1:4 (One cement: four Sand) with RCC top slab in 1:1.5:3 mix (One cement : one point five sand : three graded/crushed stone aggregate ) 20mm (Twenty millimetres) nominal size foundation concrete 1:4:8 ( One cement : four sand : eight graded/crushed stone aggregate 40mm (Forty millimetres) nominal size) inside plastering 12mm (twelve millimetres) thick with cement mortar 1:3 (One cement : three sand ) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 ( One cement : two sand : four graded/crushed stone aggregate 20mm (Twenty millimetres nominal size) with a floating coat of neat cement as per standard design finished smooth complete in all respect including curing and testing Inside size 120x90 cm (one hundred twenty into ninety centimetres) and 90 cm (ninety centimetres) deep including C.I. cover with frame (medium duty) 500 mm (five hundred millimetrrs) internal diameter, total weight of cover and frame to be not less than 116 kg(one hundred sixteen killogramme) (weight of cover 58 kg (fifty eight killogramme) and weight of frame 58 kg (fifty eight killogramme) with common brunt clay FPS common modular bricks of class designation7.5 (seven point five) with sewer bricks contormay to IS:4485 including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Constructing soak pit 1.20x1.20x1.20 m (one point two zero into one point two zero into one point two zero) metre filled with brickbats including S.W. drain pipe 100 mm ( one hundred millimetre ) diameter and 1.20 m ( one point two zero)metre long complete including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Constructing masonry Chamber 90x90x100 cm(ninety into ninety into one hundred centimetres) inside, in brick work in cement mortar 1:4 (one cement : four coarse sand) for sluice valve, with C.I. surface box 100 mm (one hundred millimetres) top diameter, 160 mm (one hundred sixty millimetres) bottom diameter and 180 mm (one hundred eighty millimetres)deep (inside) with chained lid and RCC top slab 1:2:4 mix (one cement : two coarse sand : four graded stone aggregate 20 mm (twenty millimetres) nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (one cement : five fine sand : ten graded stone aggregate 40 mm (forty millimetres) nominal size and inside plastering with cement mortar 1:3 (one cement : three coarse sand) 12 mm (twelve millimetres) thick, finished with a floating coat of neat cement complete as per standard design with common brunt clay FPS non modular bricks of class designation7.5 (seven point five) including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing solar water heating system (BUSCH) ISI Mark complete including carriage of materials upto all leads and lifts including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Design,Supply,Erection,Testing and Commissioning (on grid) complete including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Unipro Techno Infrastructure Pvt Ltd

M/s Surindera Traders