Package No. 66:- MMGSY Year (2025-26) Construction of Slab Drain & Approach on various roads (1) Nasvadi Kolu Kankuvasan Road km.6/200 to 6/400 Ta:Nasvadi, Dist:Chhotaudepur, (2) Vaguma Road km. 2/200 to 2/400 Ta:Nasvadi, Dist:Chhotaudepur, (3) Kalediya Parveta Road km.3/000 to 3/200 Ta:Sankheda, Dist:Chhotaudepur & (4) Sarangpur Approach Road km. 0/000 to 0/200 Ta: Sankheda, Dist:Chhotaudepur

BILL OF QUANTITIES

Item Description of Item (with brief specification and reference to

Quantity Unit Rate Amount

No. book of specifications)

1 Excavation for foundation in hard murrum and boulders and

very stiff or sticky, clays and other similar strata including

shoring, strutting dewatering as necessary and sisposing of the 1220.00 Cum 625.88

excavated stuff as directed.

2 Excavation in large boulders and soft rock by welding

including shoring, strutting dewatering as necessary and 1843.00 Cum 733.62

sisposing of the excavated stuff as directed.

3 Providing and casting in situ Ordinary cement concrete M-150

for R.C.C. Raft and cut-off walls including necessary shuttering 177.00 Cum 3666.43

laying, vibrating, ramming and curing complete.

4 Providing & casting in situ ordinary cement concrete M-250

mix and providing necessary pin headers including shuttering,

scaffolding, laying, vibrating, curing and finishing complete 2321.00 Cum 4393.23

without V-Groves.(A) Height from 0.0 M. to 5.0 M. ( more

5 Provision of an Reinforced cement concrete crash barrier at

the edges of the road, approaches to bridge structures and

medians, constructed with M-40 grade concrete with Fe-550D

reinforcement with epoxy coating conforming to IRC:21 and

dowel bars 25 mm dia, 450 mm long at expansion joints filled

with pre-moulded asphalt filler board, keyed to the structure

on which it is built and installed as per design given in the

enclosure to MOST circular No. RW/NH - 33022/1/94-DO III

dated 24 June 1994 as per dimensions in the approved

drawing and at locations directed by the Engineer, all as

specified as per drawing attached.

6 Providing and placing in position FE 550D bar reinforcement

for following items including cutting bending hooking and

tying complete as per detailed drawing.For well :- curb, 7.30 M.T. 73858.69

staining, cap and RCC Raft.

7 Providing and laying in position FE 550D TMT bar

reinforcement including cutting, bending, hooking and tying

complete as per detailed drawings for the following.(A) Piers 12.01 M.T. 73858.69

(B) Abutments (C) R.C.C. Returns

8 Providing and placing in position FE 550D TMT bar

reinforcement including cutting, bending, hooking, and tying 36.02 M.T. 73243.02

complete as per detailed drawing.(A) Solid Slab.

9 Providing and fixing in position FE 550D TMT bar reinforement

including cutting, bending and tying complete as per detailed

drawings. (A) R.C.C. Kerb. (B) R.C.C. Footpath.(C) R.C.C. 14.33 M.T. 73243.02

Approch slab.(D) Wearing Coat.

10 Providing and Casting in situ controlled Cement Concrete M-

250 for R.C.C work in pier cap, abutment cap and dirt wall

including controlled cement concrete M-250 bed blocks or

pedstals of required size below bearings as per detailed 81.30 Cum 5267.78

drawings, centering, shuttering, scaffolding, wherever

necessary, laying virrating, curing and finishing

complete.(more than 10 ton)

11 Providing and fixing in position mild steel dowel bars in pier

caps or abutments caps for anchorage in free end as per

detailed drawings including cutting bending and welding 63.00 Nos. 399.70

12 Providing and fixing in position mild steel dowel bars in pier

caps or abutments caps for anchorage in fix end as per

detailed drawings including cutting bending and welding 63.00 Nos. 341.29

13 Providing and casting in situ controlled cement concrete M-

300 for R.C.C solid slab including centering scaffolding curing 415.10 Cu.M. 5795.18

and finishing complete. (more than 10 ton)

14 Providing 12 mm thick pre-moulded asphalt filler joints as per

drawings. 85.30 Sq.M. 703.53

15 Providing and casting in situ ordinary cement concrete M-400

for average 100mm thick wearing coat laid as directed

including tamping, vibrating, finishing curing and filling in 69.10 Cu.M. 5578.77

joints with bitumen complete. (more than 10 ton)

16 Providing and laying filter media 600MM thick directed at the

back of abutments, returns and wing walls as per detailed

specifications. (more than 10 ton)

17 Providing and lauying weep hole in Aburtments, and returns

by using A.C. pipe of 100MM including fixing in proper grade

and jointing the complete as per detailed specification 993.00 Nos. 88.76

18 Providing G.I 100 mm diameter water spouts including

necessary iron gratings as per drawings. (more than 10 ton) 28.00 Nos. 536.03

19 Filling available excavated earth (excluding rock) in

trenches. plinth, sides of foundations etc. in layers not

exceeding 20 cm. in depth consolidating each disposited 2252.00 Cu.M. 137.47

layer by ramming and watering.

20 Providing masonary steps with cement pointing on

approaches as directed. (more than 10 ton). 163.00 Nos. 235.99

21 Providing and fixing marble slab including engraving and

painting complete. 8.00 Each 1012.64

(A) size 75 cm x 60 cm x 4 cm

22 Providing and casting in situ controlled cement concrete

concrete M-250 for approach slab including formwork curing 124.00 Cu.mt 5119.76

and finishing complete.

23 Providing flood flood gauge marks on substructure as pe

design including painting complete' 30.66 Rmt 166.92

24 Providing and filling trenches of excavation in rocky strata with

ordinary cement concrete M-100 (more than 10 ton) 130.00 Cu.M. 3283.27

25 Providing and fixing mild steel dowel bars of minimum 32mm

dia. For anchoring by drilling holes in foundation strata

including necessary bending, hooking of dowel bars and 606.00 Rmt 450.07

grouting the holes complete as per detailed drawing and as

26 Providing fusion bonded Epoxy coating not less than

micron thickness and up to 300 micron to reinforcement bars

as per IS-13620-1993/ASTM-775 M including testing of coating 45.89 MT 10163.06

at plant and all taxes (A) 10mm to 16mm dia bar

27 Providing fusion bonded Epoxy coating not less than

micron thickness and up to 300 micron to reinforcement bars

as per IS-13620-1993/ASTM-775 M including testing of 20.46 MT 7296.60

coating at plant and all taxes (B) 20mm to 32 mm dia bar

28 Providing and laying Pitching on slopes laid over prepared

filter media including boulder apron laid dry in front of toe of

embankment complete as per drawing and Technical 599.22 Cum. 1051.41

29 Providing and laying Filter material underneath Pitching in

slopes complete as per drawing and Technical specifications 180.46 Cum. 877.69

30 Dismentaling the existing structure including removing and

staking the dismentelled material as and where directed (A) 381.00 Cum 952.51

31 Clearing and grubbing road land including uprooting trunk

vegetation, grass bushes, shrubs, sapligs and trees girth upto

300 mm removal of stumps of trees cut earlier & disposal of 0.12 Ha 28455.00

unserviceable material. (C) By Mechanical means in area of

32 Earthwork in cutting including preparing the slope and camber

andstacking or utilising the cutting stuff in bank as directed

upto 200 Meters from the end of cutting with all lead and 425.00 Cum 266.77

lift.(i) Hard murrum.

33 Earth work for embankment including breaking clods, dressing

with all lead and lift and including watering, rolling and

consolidation of subgrade in layers at O.M.C. to required dry

density, including filling the depressing, which occurs during 2876.00 Cum 163.95

the process using power roller of 8 tonne to 10 tonne all as

per specification.

34 Construction of granular sub-base Gr-I by providing coarse

graded B.T. machine crushed material satisfying MOST

specification of (grading I) using materials (53 mm to

mm@ 35 percent, 26.5 mm to 4.75 mm @ 45 percent,

mm below @ 20 percent) including spreading in uniform layer 271.00 Cum 1349.13

with motor grader on prepared surface, mixing by mix in place

method with rotavator at OMC and compacting with vibratory

roller to achieve the desired density etc. complete.

35 Providing and filling in foundation with ordinary Cement

concrete M-100 mix and providing necessary vertical pin

headers including formwork, vibrating, ramming and curing 216.00 Cum 3341.41

36 Providing and laying contolled cement concret M-30 and

curing complete including compacting with surface mechanical

vibrator, mechanical floater, chanelling formwork, grooving

including providing dowel bar, tai bar, expantion joint and 412.00 Cum 4739.35

construction joint including filling asphalt filler joint as per

instruction of Engineer in charge

37 Providing and fixing in position FE 500D TMT bar reinforement

including cutting, bending and tying complete as per detailed

drawings. (A) R.C.C. Kerb. (B) R.C.C. Footpath.(C) R.C.C. 9.05 MT 73251.11

Approch slab.(D) Wearing Coat.

38 Supplying, stacking & spreading Hard murrum on road side for

hard side shoulder of work as per specification including 52.00 Cum 968.47

rolling & watering complete.

39 Providing Diversion suitable for traffic during the construction

period of the Bridge/ CD work by Levelling Existing Ground

and pipe culvert including road furniture and signages as per 80.00 Rmt 9041.71

requirement and instructed by E.I.C.

40 Informatory Signs :-Providing and fixing sing boards made out

of 2mm aluminium sheet; size 80 x 60cms. rectangle as per

the design of IRC-67-1977 pre treated with phospheting

process & acid teching; coated with one coat of epoxyprimer

and two coats of best qualityepoxy paint; reflectorised with

retro refiective sheeting as per latest M.O.S.T. Specifications;

3.1m long stand postand frame fabricated from suitable

sizeiron angle of 35 x 35 x 3mm75x75x6mm as required; 8.00 No. 3856.90

painted with best qualityepoxy coatings in black and

whitebends. the details of symbol for eachboard shall details

of symbol for eachboard shall be as per the instruction

ofengineer in charge. The fixing at site shall be in 1:2:4 CC

block of size 45 x45 x 60cms. for each leg. including excavation

curing tec. complete under the supervision of engineer in

charge.(A) Engineer Grade..............................

41 Cautionary Warning Sign :-Providing and fixing sing boards

made out of 2mm aluminium sheet; size 90 x 90 x 90 cms.

equilateral triangle as per design of IRC-67-1977. Pre treated

with phospheting process & acid etching; coated with one coat

of epoxy primer and two coats of best quality epoxy paint

;reflectorised with retro refiectivesheeting as per latest

M.O.S.T.Specifications; 3.1m long stand postand frame

fabricated from suitable sizeiron angle of 35 x 35 x 3mm, 75 x 8.00 No. 3808.66

75 x 6mm as required; painted with bestquality epoxy coatings

in black andwhite bends. The details of symbol foreach board

shall be as per theinstruction of engineer in charge. The fixing

at site shall be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for

each leg.including excavation, curing etc.complete under the

supervision of engineer in charge.(A) Engineer

42 Road Marking with hot thermoplastic paints with reflectorising

glass beads on bitumin surface providing and laying a hot

applied thermoplasic compound 2.5 mm thick including

refectorising glass beads @ 250 gms per sqm area, thickness

of 2.5 mm is excluding of surface applied glass beds as per

IRC:35-2015. The finished surface to be level, uniform and free

from streaks and holes. Zebra patta/bump Patta lane/Centre

line/ edge line/ Cut patta. The White color marking should 178.00 Sqm 367.72

provide liminance coefficient on cement road shall be min

mcd/m2/lux and Ashphalt road shall be min. 100 mcd/m2/lux

during the service life during the day time. The marking should

meet the performance criteria for night time reflectivity, wet

reflectivity and skid resistance as mentioned in section-15 of

IRC-2015 Warrenty For Reflectivity shall be Two Year.

43 Cat Eye / Road Stud/RPM: Supplying of MoIded Twin Shanks

Raised Pavement Markers made of polycarbonate and ABS

moulded body and reflective panels with MIcro prismatic lens

(No Glass bead lens) capable of providing total internal

reflection of the light entering the lens face and shall support

a load of 13635 kgs. tested in accordance to ASTM D

Type H and complying to Specifications of Category A of

MORTH Ci,cular No RW/NH/33023/10-97- DO III Dt 11.06.

1997. The height, width and length shall not exceed 20 mm,

130 mm and 130 mm and with minimum reflective area of

Sqcm on each side and andd slope to the base shall be 35 +/-5

degree. The strength of detachment of the integrated

cylindrical shanks, (of diameter not less than 19 +/- 2 mm and

height not less than 30 +/- 2 mm) from the body is ro be a

ninimum value of 500 Kgf: Fixing will be by drilling holes on

the road for the Shanks to go inside, Without nails and using

epoxy resin based adhesive as per manufacrurer's

recommendation and The color of the marker should be as

per he IRC 35-201S and as directed by Engineer-In-charge.

44 Providing and fixing 'W' type safety barrier using M.S. iron

channel 150mm x 75m x 5mm size erected at 2.0 Mt. center

to center and providing 'W' shaped galvanised steel sheet

guard rail 3mm thick for crash barrier in single row as per

detailed drawing with fabrication and installation charges 24.00 Rmt. 2056.36

including providing foundation block of size 0.60 x 0.60 x

Mt. in C.C. 1:2:4 and oil painting two coats with one coat of

red oxide etc complete.

45 Providing and Fixing Logo Board of MMGSY diamond siz(600 x

600mm) 16 gauge & board plate size (900 x 250 mm) 16 guage

thick MS Plate and 2.40 meter depp length singangle 75 x 75 x

6 mm size including fitting in CC Block CC 1:2:4, 30 x 30 x 85 7.00 Nos. 6146.86

Cm including necessary excavationpainting, lettering with

luminious colour as per drawing etc.

46 Excavation for foundation upto all depth including sorting out

and stacking of useful materials and disposing of the 386.00 Cumt 259.93

excavated stuff upto all lead (A) Dense and Hard soil

47 Provading & casting in situ ordinary cement concrete M

mix and providing necessary pinheaders including , shuttering

scaffolding laying vibrating and finishing without V-Grooves. 641.00 Cumt 3917.79

(A) Heigth from 0.0 m to 5.0m for head wall of causeway

The amount of dismentalled credit materials shall be deducted from Running Bill.

In Words: Three Crore Forty-Four Lakh Eighty-Seven Thousand Four Hundred Seventy-Three Rupees and Seventy

I/We am/are willing to carry out the work at… % above/below percent(Should be written in figures and words) of the

estimated rate mentioned above. Amount of my /our tender works out as under.

* Estimated Amount * Estimated Amount

put to tender put to tender

Deduct :…………% Below Add :………%Above

In Words …………………………………… In Words………………………………

* (Please strike out whichever is not applicable).

1 The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-

In-Charge for which no extra payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills

4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-

10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there

is a change as per actual mix design the cost of difference of cement consumption have been deducted from

the rate of original item at the rate of input rate mentioned in all the tender.

5 The amount of dismentalled credit materials at Rs. 700698.23 shall be deducted from Running Bill.

6 The Contractor will have to submit the mix design for different grades his own cost before execution as

directed and to be approved from the engineer in charge.

Deputy Executive Engineer Deputy Executive Engineer Executive Engineer

R&B (P) Sub-Division R&B (P) Sub-Division R&B Panchayat Division

Nasvadi Sankheda Chhotaudepur