C/O Division Office building at Jaisinghpur HPPWD Jaisinghpur in Tehsil Jaisinghpur Distt. Kangra (HP) (SH- Providing E.I. therein)

Amount

Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit with modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required. Make:-KEI,Anchor,L&T )Legrand (Myrius),L&T(Oris),Anchor(Roma plus)

Group c.

Wiring for twin control light point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit with 2-way, 5/6 amps. modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required. Make:-KEI,Anchor,L&T )Legrand (Myrius),L&T(Oris),Anchor(Roma plus)

Group c.

Providing and installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required:- Make: Usha/Bajaj/Crompton/Recold

Exhaust Fan, Light duty, (Domestic) 300 mm sweep

Providing and fixing surface mounted Round downlighter with die cast Al housing in white powder coated finish, anti glare diffuser and and energy efficient electronic driver ,suitable for surface application with the use of the latest technology 15 watt (1500 Lumen) 4000K and it should be compatible with specification i.e. Power Factor > 0.9, Harmonic Distortion <10% and efficacy > 100 Lumens per watt, CRI rating> 80 suitable for input voltage: AC 220-240 V, 50 Hz, complete with all accessories, connections, testing and commissioning etc. as required , (Including Five Years Warranty)

LED Surface mounting Round downlighter 15 watt

Makes:- Jaquar (Cat No LNRO02R006SC),Bajaj,Philips or any other make approved by Engineer in charge.

Providing and fixing LED bulk head fitting of following rating and it should be compatible with specification i.e. Power Factor > 0.9, Harmonic Distortion <10% and efficacy > 100 Lumens per watt, CRI rating> 80 suitable for input voltage: AC 220-240 V, 50 Hz, complete with all accessories, connections, testing and commissioning etc. as required. (Including Five Years Warranty)

LED Bulk head fitting 10 watt

Makes:- Panasonic(Cat No.-PBHM01107),Philips,Bajaj or any other make approved by Engineer in charge.

Providing, Installation, testing and commissioning of ceiling fan with socket size step type electronic fan regulator, including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. as required.

Ceiling Fan 1200 mm sweep

Makes:- Usha Technix Plus 3 Star,Bajaj or any other make approved by Engineer in charge.

Providing and fixing indoor decorative aluminium extruded LED Batten including T-8 Tube rod and it should be compatible with specification i.e. Power Factor > 0.9, Harmonic Distortion <10% and efficacy > 100 Lumens per watt, CRI rating> 80 suitable for input voltage: AC 220-240 V, 50 Hz, complete with all accessories, connections, testing and commissioning etc. as required. (Including Five Years Warranty)

Batten for T8 Tube Light, Suitable For 1X18 Watt LED

Makes:- Panasonic, Philips, Bajaj(Cat. No. BLRB DB 118 ), Jaquar or any other make approved by Engineer-in-Charge.

T8 Tube Light 18 Watt

Makes:- Bajaj (Cat. No. BLRB 18W CWC),Panasonic, Philips, Jaquar or any other make approved by Engineer-in-Charge.

Supplying and Fixing of surface mounting Aluminium 1 Ft. long LED solution suitable for surface applicationwith the use for latest technology 5 Watt ( 500 lumens) K-6000 and it shold be compatible with spectfcations i.e. Power factor > 0.9 , Harmonic dlstortion < 10% and efftcacy > 100 lumens per watt, CRL>80. sultable for lnput voltage AC 220-240v ,50/60 HZ omplete with all accesseries,including connections,testing and commissioning etc.as required complete in all respects(Including Five Years Warranty)

5 Watt ,1 Feet Long LED

Makes:- Bajaj (Cat. No. BCLSB 05WH ),Panasonic, Philips, Jaquar or any other make approved by Engineer-in-Charge.

Providing and fixing surface mounted LED Fixture (4x1) long with die cast Al housing in white powder coated finish, anti glare diffuser and and energy efficient electronic driver ,suitable for surface application with the use of the latest technology 36 watt (3600 Lumen) 4000K and it should be compatible with specification i.e. Power Factor > 0.9, Harmonic Distortion <10% and efficacy > 100 Lumens per watt, CRI rating> 80 suitable for input voltage: AC 220-240 V, 50 Hz, complete with all accessories, connections, testing and commissioning etc. as required. (Including Five Years Warranty)

LED tube fixture 36 Watt (4x1)

Makes:- Panasonic (Cat. No. PBLM15363)/ Jaquar / Bajaj

Providing and fixing surface mounted LED Fixture (2x2) long with die cast Al housing in white powder coated finish, anti glare diffuser and and energy efficient electronic driver ,suitable for surface application with the use of the latest technology 36 watt (3600 Lumen) 4000K and it should be compatible with specification i.e. Power Factor > 0.9, Harmonic Distortion <10% and efficacy > 100 Lumens per watt, CRI rating> 80 suitable for input voltage: AC 220-240 V, 50 Hz, complete with all accessories, connections, testing and commissioning etc. as required. (Including Five Years Warranty)

LED 2X2 fixture 36 Watt

Makes:- Panasonic (Cat. No. PBLM21364)/ Jaquar / Bajaj

Supplying and fixing Ding-Dong / Electronic musical bell, suitable for D.C./A.C. single phase,230 volts complete as required:-

Supplying and fixing of following way Vertical TPN MCB distribution board, 415 volts, on surface / recess, with provision to mount 8 module incomer, 4 module sub-incomer in each phase and SP MCBs as outgoing, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required:-

12+36 Modules

Make-Hager ( Cat No.VYP06DH) Havells, , L&T

Supplying and fixing of following way SEGREGATED, triple pole and neutral, sheet steel MCB distribution board, 415 volts, on surface / recess, with provision to mount 8 module incomer, 4 module sub-incomer in each phase and SP MCBs as outgoing, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required:-

12+2 way 8+6+36 Modules

Make-Hager ( Cat No.VYV12DM-P- 160) Havells, , L&T

Providing and fixing following rating and breaking capacity MCCB in the existing cubical panel board including drilling holes in the cubicle panel, making connections, etc. as required.

100 Amp. -16 KA

160 Amp. -16 KA

Makes:- L&T/Legrand/Schneider.

Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:- Makes:- L&T/Legrand/Schneider.

Single pole. Cat-A. 6 amps

Single pole. Cat-A. 16 amps

Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. Makes:- L&T/Legrand/Schneider.

63 Amps. Cat-A.

Supplying and fixing following rating, double pole (single phase & neutral) 240 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required. Makes:- L&T/Legrand/Schneider.

63 Amps. Cat-A.

Supplying and fixing following rating, four pole, 415 volts, Isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. Makes:- L&T/Legrand/Schneider.

63 Amps. Cat-A.

Supplying and fixing following rating, four pole (three phase & neutral) 415 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required. Makes:- L&T/Legrand/Schneider.

63 Amps. Cat-A.

Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required:- Makes:- L&T/Legrand/Schneider.

Double door-12 way

Earthing with copper earth plate 600 mmx600 mmx 3 mm thick, including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as required.

Extra for using salt and charcoal for G.I. or copper plate earth electrode complete as required.

Providing and fixing of lightning conductor finial, made of 25 mm dia. 300 mm long copper tube, having single prong at top, with 85 mm dia 3 mm thick copper base plate including holes etc. complete as required.

Providing and fixing 25mm x 5mm copper strip on surface or in recess for earth connections etc. as required.

Providing and fixing 8 SWG (4 mm dia.) copper wire on surface or in recess for loop earthing as required.

Providing and laying of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade direct in ground; to be laid 1 meter below the ground level including excavation sand cushioning, protective covering and refilling the trench etc. of the required size:- Make: KEI/SCI/Havells/Plaza

Armoured cable 70 sq. mm (3.5 core)

Providing, laying and fixing of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade on surface etc. of the required size:- Make: KEI/SCI/Havells/Plaza

Armoured cable 70 sq. mm (3.5 core)

Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required. Make: KEI/SCI/Havells/Plaza

2x2.5 Sq. mm.

2x4.0 Sq. mm.

2x10 Sq. mm.

2x 6 Sq. mm.

Make: KEI/SCI/Havells/Plaza

Wiring for power plug with 4x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 2 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required.

Make: KEI/SCI/Havells/Plaza

Supplying and drawing following size of PVC insulated, heat resistant, flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in existing surface / recessed, Steel/PVC conduit as required.

PVC insulated HRFR LS Copper conductor 1.5 Sq. mm.

3x2.5 Sq. mm.

Make: KEI/SCI/Havells/Plaza

Wiring for circuit / sub-main with 4x16 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 2 No.16 Sq.mm. (4x16+2x16) HRFRLS/PVC insulated single core copper conductor cable for earthing as required.

Make: KEI/SCI/Havells/Plaza

Supplying and fixing 20 Amps, 240 volts, SPN industrial socket outlet, 2-pole & earth, metal enclosed plug top, sheet steel enclosure, suitable to accommodate a 20 Amp SPN-MCB/DP, on surface or in recess, with chained metal cover for the socket outlet, complete with connections, testing and commissioning etc. as required.

Supplying and fixing of following sizes of PVC conduit along with the accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required:- Make: Diplast/BEC/Finolex

50 mm. dia

32 mm. dia

Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 6 pin 15/16 amps modular socket outlet and 15/16 amps, modular switch, connections etc. as required. Makes:- Legrand(Myrius),L&T(Oris),Anchor Roma(Plus).

Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 5 pin 5/6 amps modular socket outlet and 5/6 amps, modular switch, connections etc. as required. Makes:- Legrand(Myrius),L&T(Oris),Anchor Roma(Plus).

Providing and laying of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade direct in ground; to be laid 1 meter below the ground level including excavation sand cushioning, protective covering and refilling the trench etc. of the required size:- Makes:- KEI/SCI/Havells/Plaza

Armoured cable 6 sq. mm (twin core)

Armoured cable 10 sq. mm (twin core)

Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required:-

Double door-4 way

Supply and erectionof Steel Poles - are made out of mild steel tubes with cast Aluminium embellisment having bottom dia. 140mm. Pole base-140 are made ouy of die cast aluminium , dully painted with PU paint ( Golden Colour). The poles are suitable for different type of brackets as single,twin,tripple luminaire Hanging mounting . The pole have service window at the bottom compromising four way 25 amps connectors terminal and a MCB. The polescan be mounted with four numbers anchor bolts as per foundation drawing etc complete in all respect and to the best satisfaction of engineer in charge.

Makes:- Twinkle LUMAX Steel Base pole PT -140-300 -

Providing and fixing Genius -V Post TopLED fixture made of spun alum, housing with strudy bracket with powder LED,s are mounted directly on extruded alum. Heat sinks . A UV stablized PC/PMMA diffuser is provided for glaire free lightining with high visual comfort. It should be compatible with specification i.e. Power Factor > 0.9, Harmonic Distortion <10% and efficacy > 100 Lumens per watt, CRI rating> 80 suitable for input voltage: AC 170-270 V, 50 Hz, complete with all accessories, connections, testing and commissioning etc. as required. (Including Five Years Warranty)

40 Watt LED Post Top Light

Makes:- Twinkle ( cat No.Lumax PT` -153) / Jaquar/ Bajaj / Panasonic

Annexture - B

Supplying, installation, testing and commissioning of 1.5 TR capacity hot & cold (Inverter) Split type Air-Conditioning unit of following make confirming to I.S.I.-1391 PART-1992 with ammendment No. 1 (expect power consumption norms) fitted with hermatically shielded air-compressor including the cost of Gas charging, stand for outdoor unit and 4KVA/5KVA Stablizer as required complete in all respects.

A.C. Unit 2Ton capacity (Hot & Cold )

Makes: O General (Model No : ASGG24LFCDB (R410A(4 Star)/Daikin (5Star)/ Mitsubshi (5star)

Providing & fixing of extra copper tubes for refrigerant and condensate (1/4" - 1/2") for 2 T.R. split type A.C. units and wiring with suitable size of HRFRLS copper conductor single core cables, including the cost of insulation etc. as required complete in all respects.

Supplying and fixing of 25mm dia of PVC drain pipe along with the accessories in surface/recess including cutting the wall and making good the same in case of recessed pipe as required.

Supplying and fixing wall mounting voltage stabilizer of following rating with output 240 volts with voltage regulation range from 170 volt to 250 volt and auto cut off beyond this range and time delay operation for the surges and fluctuations suitable for 1.5/2.0 TR capacity split type Air-Conditioner including making connections etc. as required complete in all respects.

Automatic Voltage Stabilizer 4 KVA

Makes:- V-Guard /Microtek/Godrej or equivalent.

Providing & fixing of M.S. Outdoor heavy duty stand powder coated suitable suitable to hang 1.5/2.0 TR Split type AC with six nos. anchor bolts as required complete in all respects and as per direction of Engineer in charge.

Annexture - C

Supplying, eraction, testing & commissioning of true double conversion 10 KVA UPS with enclosure of suitable for single phase AC input and single phase AC out put with battery backup of 60 min (with min. VAH=15600 VAH) (65AH * 20 No. of batteries). The UPS should be of Microprocessor control double conversion, IGBT based invertor with LCD display for monitoring of its status. The job includes the cost of carriage, erection, commissioning and testing charges including rack, connecting and other petty material required to complete the job. The UPS should be of Numeric/Emerson/APC/Eaton/Fuji Electric make only.

10 KVA online UPS 1 No.

12V*65Ah*20 Nos. Exide SMF.

Backup Up to – 120 Mins backup.

Batt with Open Rack &

Connecting Cables

The UPS should have following specification.

Automatic by-pass facility.

Input 160V-280V,50+/-3%

Output 220 V AC/230VAC +/-1%, 50+/-0.5Hz single phase

Operating temp. 0C to 40 C continuous.

Total harmonics distribution output :<2% maximum on linear load and <5% on non linear load

Efficiency overall efficiency (minimum 90%)

UPS input power factor at rated load: 0.95 or better

Overload: UPS shall withstand 10% overload for 10 minutes and 30% over load for 1min.

Protection: following protection shall be provided in UPS.

Over voltage, short circuit and overload at UPS output terminal

Audible Alarm operators on fault conditions

Indicators and meters

Mains presence.

Battery charging and discharging

Output overload

Low battery voltage.

Digital meter shall be provided for monitoring the following parameters in UPS.

Input AC voltage.

Output AC voltage, current and frequency.

Battery bank should be of Exide/ Amaron only.

Warranty: 2 year for UPS & battery bank.

Annexture -D

Providing and drawing LAN cable CAT6, LS0H, ETL and UL certified, in existing PVC conduit/ casing and capping or as required to have end-to-end solution complete in all respects and to the best statisfaction of Engineer in Charge.

(Makes:- Belden/ Panduit/ Corning/ Molex)

Providing and fixing CAT6 24 Port Patch Panel - unloaded, should be made of cold rolled steel, labeling strip for identification, and UL listed or as required to have end-to-end solution complete in all respects and to the best staisfaction of Engineer in Charge.

(Makes:- Belden/ Panduit/ Corning/ Molex)

Supplying, Installation and fixing of CAT6 Information Outlet (I/O), White, shuttered, as required to have complete solution in all respects and to best staisfaction of Engineer in Charge.

(Makes:- Belden/ Panduit/ Corning/ Molex)

Providing and patching CAT 6 patch cord UTP LS0H 0.5 meter long, Grey, as required to have complete solution in all respects and to best staisfaction of Engineer in Charge.

(Makes:- Belden/ Panduit/ Corning/ Molex)

Providing and patching CAT 6 patch cord UTP LS0H 2.0 meter long, Grey, as required to have complete solution in all respects and to best staisfaction of Engineer in Charge.

(Makes:- Belden/ Panduit/ Corning/ Molex)

Providing and fixing of 12U Wall Mount Networking Rack with lock, 1U Cable Manager, 1 PDU, and 1 Pack of Hardware to have end-to-end solution complete in all respects and to the best statisfaction of Engineer in Charge

(Makes:- Comrack/ Rittal / PRESIDENT/Netrack/Wbox)

Supply, Installation, testing, and Commissioning of 24 Port Gigabit Ethernet Smart Switch with web management interface, as required to have complete solution in all respects and to best staisfaction of Engineer in Charge.

(Makes:- ATI/Cisco/Extreme/Juniper/HP)

Supplying and fixing of following sizes of PVC conduit along with the accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required:-

25 mm. dia

Supplying and fixing of G.I Modular box of 2module along with the accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required for connecting i/o for LAN connections . Makes:- Legrand(Myrius),L&T(Oris),Anchor Roma(Plus).

2 module modular boxes

JAMWAL ELECTRICAL WORKS

ARUN KUMAR SHARMA