Demarcation and restoration work of Takiya Dy.

Amount

L- Earth work- Earth work in clearance (Cutting/Flling) of section of canal inclusive of manual compaction but excluding of mechanical compaction also including lead up to 100 Mtr & Lift up to 1.50Mtr and dressing of excavated soil.

Earth work by Transport including initial lead upto 1M with manual compaction and dressing to profile.

C. Work- Centering & Shuttering for C.C. blocks and concrete including all cost of fixing, removing, materials , labour and T&P etc.

Plain Cement Concrete in 1:3:6 in foundation with Coarse Sand having F.M. Not less than 2.5, Crushed Stone Aggregate of nominal size of 20 mm to 40 mm, Mechanically mixed, placed in foundation and properly compacted including cost of all materials, T&P etc.

Laying P.C.C. (1 : 2 : 4) with coarse sand and crushed aggregate including all cost of material, labour and T&P etc.

Providing, laying and fixing of jointing RCC hume pipe 150mm Dia including all cost of material labour T& P etc for complete work.

Ist Class Brick Masonary work in 1:4 with Cement and Coarse Sand including cost of all materials, labour and T&P with all leads and lift/down for proper completion of work as directed by Engineer-in-Charge as per drawing and I.D. specification.

10 to 15 mm thick Cement Plaster in 1:4 cement mortar single coat on rough side of single or half brick wall for interior plastring in single storey building finish even & smooth including all cost of material labour T& P etc for complete work.

Struck deep Cement Pointing in 1:2 Cement Mortor including cost of all materials, labour and T&P etc. for proper completion of work as directed by Engineer-in-Charge as per drawing and I.D. specification.

Laying C.C. (1 : 1.5 : 3) with coarse sand and crushed aggregate including all cost of material, labour and T&P etc.

Centering & Shuttering for R.C.C. work including all cost of fixing , removing , materials, lobour and T&P etc.

Providing and laying Steel in Reinforcement including cost of steel carriage, bending, cutting, placing in position and binding with steel binding wire etc. including cost of all materials, labour and T&P with all leads and lift for prope completion.

Reinforced cement concrete in 1:1.5:3 in all RCC work with Coarse sand having F.M. Not less than 2.5, Crushed Stone Aggregate of nominal size 12.5 mm to 20 mm, Mechanically mixed and properly compacted by Vibrator including cost of all materials labours T&P etc.

Fixing of stone Wheel Guard (0.200 x 0.200 x 0.750m ) , with earth cutting and earth filling,including cost of wheel guard and carriage charge from store to work site Labour and T&P etc.

Finishing of walls with two coat of water proofing cement paint of approved make such as super Snowcem, Durrocem, Robiacem, Guttucem, supreme quality of required shade on uncoated wall surface after thoroughly brushing the surface to remove all dirt and remain of loose powdered materials including curing and cost of all materials.

Painting letter above 8CM and upto 15CM size complete including supply of all material ,Labour and T&P etc.

Making and Fixing Sign board during construction work at site including cost of all materials, labour and T&P etc. complete work as directed by Engineer-in-Charge as per I.D. specification.

Making Cattle Ghat in U/S and D/S of Some DRB/PRB/VRB's Lining Provisions including cast of labour and T&P etc. in all respect as directed by Engineer-In-Charge as per Drawing and I.D. specification.

Making subgrade for lining work including watering, compaction and preparation of surface including cost of labour and T&P etc. as directed by Engineer-In-Charge as per drawing and I.D. specification.

Providing and Filling100 mm thick coarse sand with cost of all material,labour and T&P for proper completion of work as directed by Engineer-In-Charge as per drawing and I.D. specification.

Providing and laying stone grite 4.75 mm to 20 mm with cost of all material,labour and T&P for proper completion of work as directed by Engineer-In-Charge as per drawing and I.D. specification.

Providing and laying 150 micron thick L.D.P.E film with cost of all material,labour and T&P for proper completion of work as directed by Engineer-In-Charge as per drawing and I.D. specification.

Face to be painted with sealing primer Between construction joint with cost of all material,labour and T&P for proper completion of work as directed by Engineer-In-Charge as per drawing and I.D. specification.

Providing & Fixing Water Seal Materials in expansion joints and contraction joints including cost of all materials ,labour and T&P etc.

Supply & laying of local sand filling on bed including materials, labour T&P etc. completion of work.

Dry brick on edge soling with 1st class brick including preparation of sub-grade to prescrib camber, filling joint with Local sand/earth including cost of material, labour and T&P etc for proper completion of work as directed by Engineer-in-Charge as per drawing and I.D. specification.

Repair of steel gate at head regulator, X-regulator Minors & Distributry top and side channel ISMC frame channel ISMC bracing of angle iron 8 mm thick MS Plate,round driving shoft 50mm dia ,75mm dia GI cover pipe ,thrust bearing ,gun metal bush,chucknut of 4.0 kg driving wheel,two coat painting over primer coat with taking out decayed gate from site carriage to workshop, workshop to site,errection of site including all cost of material ,labour charges, T&P etc required to complete.

M/s Parth and Associate (BID ID -4613584)