Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹40.2 LRejected-Finance | L1 | Rejected-Finance LOWEST AMOUNT | |
| 2 | l2₹40.3 L+₹11,008 (0.27%)Rejected-Finance VILL ATHMAN PO AMB TEH AMB DISTT UNA HP | UNA | HIMACHAL PRADESH | 174301 | l2 | Rejected-Finance HIGEST AMOUNT | |
| 3 | Rejected-Technical RAMNAGAR JAMMU AND KASHMIR | RAMNAGAR | UDHAMPUR | JAMMU AND KASHMIR | - | Rejected-Technical NO SUBMISSION OF AFFEDIVT BID ARE CORRECT |
Tender Value
₹46.1 L
EMD Value
₹93,000
Closing Date
4 Nov 2022, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
EE HPPWD DIVISION KOTLA BEHR
EE HPPWD DIVISION KOTLA BEHR
CONSTRUCTION OF ADDITIONAL ACCOMMODATION AT GSSS KAHANPUR SUB HEAD C.O THREE ROOM WITH VARNDHA
2022_PWD_66695_1
TENDER NOTICE NO 4614-25DT 7.10.2022
Open Tender
Civil Works - Buildings
Item Rate
180 days
KOTLA BEHAR
Please refer Tender documents.
2 documents required · 2 mandatory
₹2,500
₹93,000
18 Dec 2022
30 Oct 2022
5 Nov 2022
30 Oct 2022
4 Nov 2022
30 Oct 2022
Amount
Excavation in foundation trenches etcetera by mechanical means (Hydrolic excavator)/ mechanical means in earth work in all type of classification of soil such as pick work, jumper work, pick jumper work, blasting work, jumper blasting work, soft and hard blasting and doing work in saturated soil, including chiseling or wedging out rocks where blasting work is prohibited or any other mixed variety of soil, including shoring, strutting, de-watering and pumping or bailing out water (surface and sub soil water) upto any depths or any quantum of water including slush which may arise during de-watering, removal of slush and stacking the excavated soil clear from the edge of excavation within all leads and lifts as directed by Engineer-in- charge and then returning the stacked soil in 15cm (Fifteen centimeter) layers, when required into plinths and sides of foundation etcetra consolidating each deposited layer by ramming, watering and then disposing of all surplus excavated earth as directed by the Engineer-in-Charge, within all leads, and lifts disposed earth to be levelled and neatly dressed including carriage of materials within all leads and lifts. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
Providing form work with steel plates 3.15mm (Three point one five millimeters) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering strutting and propping etcetra, with wooden battens and ballies, for all height of propping and centering in all heights. below supporting floor to ceiling upto any height and removal of the same for in – situ reinforced concrete and plain concrete work in foundation footings, basis of columns etcetera and mass concrete, including carriage of materials. Within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
Providing form work with steel plates 3.15mm (Three decimal one five millimeters)thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering strutting and propping etecera, with wooden battens and ballies,for all heights of propping and centering in all heights below supporting floor to ceiling upto any height and removal of the same for in-situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended floors, roofs, landings, shelves, and the like floor, etecetra. up to any thickness, up to all floor level, including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
Providing form work with steel plates 3.15mm (Three point one five millimeters)thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering strutting and propping etcetra, with wooden battens and ballies, for all height of propping and centering in all heights below supporting floor to ceiling upto any height and removal of the same for in-situ reinforced concrete and plain concrete work in beams cantilevers, girders and lintels, sides and soffits of beams, beam haunchings, cantilevers, girders, bressumers and lintels upto any depth/height/thickness up to all floor level, including carriage materials of within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
Providing form work with steel plates 3.15mm (Three point one five millimeters)thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering strutting and propping etcetra, with wooden battens and ballies, for all height of propping and centering in all heights below supporting floor to ceiling upto any height and removal of the same for in-situ reinforced concrete and plain concrete work in Columns, pillars, posts and struts, (square, rectangular or polygonal in plan) in any height/thickness/depth up to all floor level, including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
Providing form work with steel plates 3.15mm (Three decimal one five millimeters)thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering strutting and propping etcetra, with wooden battens and ballies, for all height of propping and centering in all heights below supporting floor to ceiling upto any height and removal of the same for in-situ reinforced concrete and plain concrete work in stairs cases with sloping or stepped soffits, excluding, landing, up to all floor level, including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
Providing form work with steel plates 3.15mm (Three decimal one five millimeters) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering strutting and propping etcetra, with wooden battens and ballies, for all heights of propping and centering in all heights below supporting floor to ceiling upto any height and removal of the same for in-situ reinforced concrete and plain concrete work in edges of slabs and breaks in floors and walls upto any width, up to all floor level, including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
Providing and laying in position machine batched and machine mixed cement concrete work of grade M-20 (M-Twenty) design mix to obtain the minimum compressive strength of 20N/mm2 (Twenty newton per square millimetre) for reinforced cement concrete work with cement contents not less than 330 kg (Three hundred thirty kilogramme) per cubic metre as per approved design mix for all works upto plinth level to give a smooth surface including curing complete and pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement including admixture in recommended proportion as per IS:9103 to accelerate, retard setting of concrete improve workability without impairing strength and durability for reinforced concrete work complete as per approved drawing,design and as per the direction of Engineer-in-Charge including carraige of materials with in all leads, lift and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.
Providing and laying in position machine batched and machine mixed concrete work of grade M-20 (M-Twenty) design mix to obtain the minimum compressive strength of 20N/mm2 (Twenty newton per square millimetre) for reinforced cement concrete work with cement content not less than 330 kg (Three hundred thirty kilogramme) per cubic metre as per approved design mix for all works above plinth level up to all floor level to give a smooth surface mechanically mixed and vibrated including curing complete and pumping of concrete to site of laying but excluding the cost of centring, shuttering, finishing and reinforcement including admixture in recommended proportion as per IS:9103 to accelerate, retard setting of concrete improve workability without imparing strength and durability for reinforced concrete work complete as per approved drawing,design and as per the direction of Engineer-in-Charge including carraige of materials with in all leads, lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.
Providing and laying mechanically mixed and vibrated cement concrete 1:4:8 (one cement isto four sand isto eight graded crushed stone aggregate 40mm (forty millimeter) nominal size) and curing complete, in or under water, including pumping or bailing out water/dewatering, removal of slush which may arise at the time of laying under water complete excluding the cost of form work in foundation and plinth in all depths/heights as per HPPWD specifications or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST and any other taxes imposed by the Government.
Providing and laying mechanically mixed and vibrated cement concrete 1:5:10 (one cement isto five coarse sand isto ten graded stone aggregate 40mm ( forty millimetre nominal size) and curing complete excluding cost of form work in foundation and plinth in all depth as per HPPWD specification, approved Drawings, design as per the entire satisfaction and direction of Engineer in charge including carriage of material within all leads lifts and other incidentals.The rate is including of octroi, royality, Malkana, toll tax, sale tax, GST and any other taxes imposed by the Government.
Providing Tor steel steel reinforcement of Thermo-Mechanically Treated bars of grade Fe-500D or more of Tata Tiscon / Sail for Reinforced concrete work including straightening, cutting, bending, placing in position and binding including the cost of binding wires complete upto all floor level and as per HPPWD specifications, approved Drawing,design, as per the entire satisfaction and direction of Engineer in charge including carriage of material within all leads lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.
Course rubble masonry second sort coursed with hard stone of approved quality in foundation and plinth upto all heights/depths including racking out joints in cement mortar 1:6 (one cement isto six sand) and curing complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST and any other taxes imposed by the Government.
Brick work using common burnt clay F.P.S. (Non Modular) buildings bricks in super-structure above plinth level upto all floor level in cement mortar 1:6 (one cement : six sand) including curing complete and carriage of materials within all leads, lifts and other incidental. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST and any other taxes imposed by the Government.
Half Brick masonry using Second class common burnt clay buildings bricks in super-structure above plinth level upto all floor level in cement mortar 1:4 (one cement : four sand) including curing complete and carriage of materials within all leads, lifts and other incidental. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST and any other taxes imposed by the Government.
Providing and fixing angle iron frames for doors, windows and ventilators manufactured from mild steel Angle sections of size 35x35x5 mm (thirty five into thirty five into five millimetre) and mild steel flat 35x5 mm ( thirty five into five millimetre) welded together including hinges, jambs, lock jamb, beed and if required angle thrashold of mild steel angle 50x25mm (fifty into twenty five millimetre) welded or rigidly fixed by mechanical means, lugs with split end tails to each jamb including steel butt hinges 2.5mm (two point five millimetre) thick with provision for locking arrangement and shock absorber as specified and applying a priming coat of approved steel primer after pretreatment of the surface complete as per the as per the direction of Engineer-in-Charge including carriage of material with in all leads ,lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government.
Providing and fixing M.S channels Frame75x40x4mm (Seventy five into forty millimeter into Four millimeter) with MS flat 75x4mm(Seventy five into four millimeters) in combination welded together to make frame as per drawing and design including hinges jamb, lock jamb, beed and if required angle thrashold of mild steel angle 50x25mm ( fifty into five millimetre) welded or rigidly fixed by mechanical means lugs with split end tails to each jamb including steel but hinges 2.5 mm ( Two point five millimetre) thick with provision for locking arrangement and shock absorber as specified and applying a priming coat of red lead paint complete up to any floor level and as per the direction of Engineer-in-Charge including carriage of materials with in all leads ,lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government.
Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etcetra complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment). Fixing with 15x3 mm (fifteen into three millimetre) lugs 10 cm (ten centimetre) long embedded in cement concrete block 15x10x10 cm (fifteen into ten into ten millimetre) of C.C. 1:3:6 (one Cement isto three coarse sand isto six graded stone aggregate 20mm (twenty millimetre) nominal size) as per the direction of Engineer-in-Charge including carriage of materials with in all leads ,lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government.
Providing and fixing fly proof stainless steel ( Grade 304) wire guage of 0.5mm ( Zero point five millimeter) dia wire and 1.4mm (one point four millimetre) aperture on both side in windows, clerestory windows and doors with S.S Flat 15x3mm ( Fifteen into Three millimeter), nut and bolts complete and as per the direction of Engineer-in-Charge including carriage of materials with in all leads , lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government
Providing and fixing glazing with glass panes of 4.00 mm (four millimetres) thickness frosted glass weight not less than 10 kg (ten kilograme per suare metre) of Modi guard / Saint Gobain in steel) door, window , ventilator shutter and partition etcetra with EPDM rubber /Neoprene gasket etcetra complete as per architectural drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.
Providing and fixing plain M.S. grills of required patterns in wooden/steel frames of window etcetra with M.S. flat, square or round bars bolts and nuts or screws including welding with frame complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
Providing and fixing 35 mm (thirty five millimetre) thick ISI marked factory made flush door shutters conforming to IS : 2202 (Part I) non-decorative type termite resistant and water proof core of block board construction with frame of 1st (first) class hard wood and well matched commercial 3 (three) ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: ISI marked Stainless Steel butt hinges with necessary screws as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royalty, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.
Providing and fixing 25 mm (twenty five millimetre) thick ISI marked factory made flush door shutters for cup board conforming to IS : 2202 (Part I) non-decorative type bonded termite resistant water proof core of block board construction with frame of 1st (first) class hard wood and well matched commercial 3 (three) ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: including ISI marked Nickle plated bright finished mild steel piano hinges with necessary screws as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royalty, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.
Providing and fixing anodized aluminum sliding door bolts ISI marked anodized ( anodic coating not less than grade AC 10 (Ten) as per IS : 1868) transparent or dyed to required colour and shade with necessary bolts, nuts and screws etcetera complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST and any other taxes imposed by the Government. 250x16mm (two hundred into sixteen millimeters).
Providing and fixing anodized aluminum tower bolts ISI, marked anodized ( anodic coating not less than grade AC 10 (Ten) as per IS : 1868) transparent or dyed to required colour and shade with screws etc. complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST and any other taxes imposed by the Government. 250x10mm (two hundred fifty into ten millimeters).
Providing and fixing anodized aluminum tower bolts ISi marked anodized ( anodic coating not less than grade AC 10 (Ten) as per IS : 1868) transparent or dyed to required colour and shade with screws etc. complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST and any other taxes imposed by the Government. 200x10mm (two hundred into ten millimeters).
Providing and fixing aluminium handles ISI marked anodized ( anodic coating not less than grade AC 10 (Ten) as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etcetra. complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST and any other taxes imposed by the Government. 125mm (one hundred twenty five millimeters).
Providing and fixing aluminium handles ISI marked anodized ( anodic coating not less than grade AC 10 (Ten) as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etcetra complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST and any other taxes imposed by the Government. 100mm (one hundred millimeters).
Providing and fixing bright finished brass 100 mm (one hundred millimeters) mortice latch and lock, ISI marked, with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles of approved quality with necessary screws etcetra complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST and any other taxes imposed by the Government.
Providing and fixing 115 mm (one hundred fifteen millimeters) oxidised M.S. hasp and staple (safety type) conforming to IS : 363 with necessary screws etcetra complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST and any other taxes imposed by the Government.
Providing and fixing oxidised M.S. casement stays (straight peg type) with necessary screws etcetra complete. 200 mm (two hundred millimetre) weighing not less than 120 gms (one hundred twenty grams) of approved quality or as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST and any other taxes imposed by the Government.
Providing and Laying 600mm x 600 mm ( Six hundred into Six hundred millimeter) double charge/ultra charged Matt finished vitrified floor tiles of RAK/NIRCO/KAJARIA/AGL/SIMPOLO/ORIENT and BELL in flooring as per approved shade and design of the office ( thickness to be specified by the manufacture) with water absorption less then 0.08% (zero point zero eight percent) and conforming to IS: 15622 of approved make, in all colours and shades, laid on 20mm ( Twenty millimeter) thick cement mortar 1:4 ( One cement isto four coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (at the rate three point three killogram per square metre) including grouting the joints with white cement and matching pigments etcetra, complete including carriage of material with in all leads, lifts and other incidentals. The rate is including the octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government.
Providing and laying matt finished 600mm x 600 mm ( Six hundred into Six hundred millimeter) vitrified tile of RESTILE/ NITCO/RAK/KAJARIA ETEANITY/AGL/ SOMANY / SIMPOLO of approved shade and design ( thickness to be specified by the manufacture) with water absorption less then 0.08% (zero point zero eight percent) and conforming to IS: 15622 of approveed make, in all colours and shades in skirting, riser of steps, over 12mm ( Twelve millimeter) thick cement mortar 1:3 ( One cement isto three coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (at the rate three point three killogram per square metre) including grouting the joints with white cement and matching pigments etcetra, complete including carriage of material with in all leads, lifts and other incidentals. The rate is including the octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government
Providing and fixing 1mm (one millimetre) thick M.S. sheet door with frame of 40x40x6 mm (forty into forty into six millimetre) angle iron and 3 mm (three millimetre) M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm (forty into forty into six millimetre) for diagonal braces complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST and any other taxes imposed by the Government.
Providing and fixing 110mm ( One Hundred Ten millimeter) diametre wall faces unplasticised rigid PVC (D-Plast) Rain water pipe of Supreme/ Finolex/ Vecturs/ Relpipe ( Reliance) conforming to IS 13592 Type-A including filling the joints with approved adhesive complete as per entire satisfaction and the direction of Engineer-in-Charge. Including carriage of materials within all leads, lifts and other incidental.The rate is including of octroi, royality, Malkana, toll tax, sale tax, GST and any other taxes imposed by the Government.
Providing and fixing on wall faces PVC (D-Plast) accessories for rain water pipes including filling the joints with approved adhesives complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST and any other taxes imposed by the Government. PVC Coupler 110mm (one hundred ten millimeter) nominal diameter.
Providing and fixing on wall faces PVC (D-Plast) accessories for rain water pipes including filling the joints with approved adhesives complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST and any other taxes imposed by the Government. PVC Plain bend 110mm (one hundred ten millimeter) nominal diameter.
Providing and fixing 110 mm (one hundred ten millimetre) PVC pipe clips of approved design to PVC rain water pipes by means of 50x50x50mm (Fifty into fifty into fifty millimetre) hard wood plugs screws with mild steel screws of required length including cutting brick work and fixing in cement mortar 1:4 ( one cement isto four coarse sand) and making good the wall etcetra complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST and any other taxes imposed by the Government.
6mm (six millimeters) thick cement plaster to ceiling with cement mortar 1:3 (one cement : three sand) upto all floor level complete including curing and carriage of materials with in all leads lifts, and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST and any other taxes imposed by the Government.
15mm (fifteen millimeter) thick cement plaster with cement mortar 1:6 (one cement isto six sand) in single coat on rough side of brick/concrete/stone walls for interior plastering up to all floor levels, including arises, internal rounded angles, chamfers and/or rounded angles, in all girth and finished even and smooth complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST and any other taxes imposed by the Government.
15mm (fifteen millimeter) thick cement plaster with cement mortar 1:4 (one cement isto four sand) in single coat on fair side of brick/concrete/stone walls for interior plastering up to all floor levels, including arises, internal rounded angles, chamfers and/or rounded angles, in all girth and finished even and smooth complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST and any other taxes imposed by the Government.
Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning, oil, grease, dirt and other foreign matter sand papering and knotting with ready mixed paint brushing wood primer pink of approved brand and manufacture (Narolac/Asian paints) complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST and any other taxes imposed by the Government.
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications. Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm (at the rate zero point nine zero litre per ten square metre) over an under coat of primer applied @0.75 ltr/10 sqm (at the rate zero point seven five litre per ten square metre) of approved brand and manufacture complete as per HPPWD specification or as directed by Engineer-In-Charge including carriage of material with in all leads, lifts and other incidential. The rate is including of octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm (at the rate zero point nine zero litre per ten square metre) over an under coat of primer applied @ 0.80 ltr/ 10 sqm (at the rate zero point eight zero litre per ten square metre) of approved brand and manufacture complete upto all floor level as per HPPWD specifications or as direction by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST and any other taxes imposed by the Government.
Distempering (two or more coats) with oil bound washable distemper of approved brand and manufacture (Nerolac/Asian) and of required shade on un-decorated wall surfaces to give an even shade over and including water thinnable primer coat with primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter including preparing the surface even and sand papered smooth and carriage of materials within all leads, lifts and other incidental. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST and any other taxes imposed by the Government.
Finishing wall with water proofing cement paint of approved brand and manufacture (Nerolac Surksha/Apex exterior) and of approved shade on undecorated wall surfaces (two or more coats) to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, other foreign matter and sand papered smooth including applying of putty as required for making the surface smooth complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST and any other taxes imposed by the Government.
White washing with lime on undecorated ceiling and/or sloping roofs (two or more coats) to give an even shade including thoroughly brooming the surface to remove all dirt, dust, mortar drops and other foreign matter including preparing the surface even and sand papered smooth and carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST and any other taxes imposed by the Government.
Filling in plinth with sand under floors including watering, ramming consolidating and dressing complete as per HPPWD specification or as directed by Engineer-in-Charge and carriage of materials with in all leads, lifts and other incidental. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST and any other taxes imposed by the Government.
Stone filling dry hand packed tightly, under floors, complete as per HPPWD specifications or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST and any taxes imposed by the Government.
Providing under layer for plinth protection of 75mm (Seventy five millimeters) thick (unconsolidated) bed of dry brick/stone aggregate 40mm(Forty millimeters) nominal size well rammed and consolidated and grouted with fine sand including preparation of ground complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST and any other taxes imposed by the Government.
Providing plinth protection 50mm (fifty millimeters) thick in cement concrete 1:3:6 (one cement isto three sand isto six graded crushed stone aggregate 20mm (twenty millimeters) nominal size) including finishing the top surfaces of concrete smooth as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST and any other taxes imposed by the Government.
Sandeep Kumar Dhiman
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .